cygserver-config error

Similar Questions

• Config error free on Satellite A100

  Dear Toshiba support,
  I use a laptop Satellite A100-036 of Satellite, when I start my laptop it shows the following error
  Not found
  c:\programFiles\TOSHIBA\ConfigFree\MUI\ENG\NDSNLS. INI
  Please help me to solve this error. I tried to download freeconfig tool site, but it doesn't help me solve the problem, please sat down me for this problem

  Thanks and greetings
  M.Sheik Nhut
  [email protected]

  Hello

  It seems the OS attempts to load the file Config-free, which does not exist or the path to this file is wrong.
  Both are possible!

  How have you tried to reinstall the ConfigFree! In my opinion you should first try to remove the old Configfree system, then after new reboot, you should try to reinstall the downloaded new utility.

  Good luck

  By the way; Do not forget that you have downloaded the Configfree for the right laptop series

• Two-way Config error

  I'm a Bi-directional (active - active) config for my DB.
  
  System1 <>- system2
  
  The problem I encountered was a loop to the original system, which would cause record duplication errors. I searched the net and used 'GETAPPLOPS' & 'IGNOREREPLICATES' and 'TRANLOGOPTIONS EXCLUDEUSER xxxx' in both the ext1 extracted in system1(Source machine) and ext2 in system2 (target machine).
  
  But now I am unable to replicate the record now. What must have gone bad? I do this mapping in Datapump? as indicated in the RFSO GG mapping is checked. Here are the params Ext1 and Ext2
  
  EXT1
  ----------------------------------------------------------------
  EXTRACT ext1
  USERID - abc, dba PASSWORD
  Abc, DAOBWAGFFIIDEJTHTCIJUBGBSDJBBFTKJYBLJGPIFBPASEFJHJWCEJBHHFGJXD, encryptkey secret1 PASSWORD USERID
  discardfile. / dirrpt/ext1.dsc, purge
  reportcount every 30 minutes, rate
  NOCOMPRESSDELETES
  exttrail/u01/app/oracle/product/gg/dirdat/l1
  ABC TRANLOGOPTIONS EXCLUDEUSER
  GETAPPLOPS
  IGNOREREPLICATES
  table abc.*;
  
  ext2
  -----------------------------------------------------------------
  EXCERPT from ext2
  USERID - abc, dba PASSWORD
  Abc, DAOBWAGFFIIDEJTHTCIJUBGBSDJBBFTKJYBLJGPIFBPASEFJHJWCEJBHHFGJXD, encryptkey secret1 PASSWORD USERID
  discardfile. / dirrpt/ext2.dsc, purge
  reportcount every 30 minutes, rate
  NOCOMPRESSDELETES
  exttrail/u01/app/oracle/product/gg/dirdat/l2
  ABC TRANLOGOPTIONS EXCLUDEUSER
  GETAPPLOPS
  IGNOREREPLICATES
  table abc.*;
  
  I have to do the mapping more my excerpt/datapump/replicate?
  
  What all things, we need to take more care in a two-way configuration?

  Lother says:
  For Replicat1, it's on the target machine, I use "ggs_admin1" user to connect to the DB. And even I use Ext1 to EXCLUDE (TRANLOGOPTIONS EXCLUDEUSER ggs_admin1)

  Given that you only posted the configurations of the excerpt, I had no way to tell if you were right or wrong. The idea is:

  X server:
  REP connects with the user GGS1
  Extract connects with the user GGS1 and excludes to capture transactions from GGS1 (REP uses this user to apply changes, so by excluding, get rid of data ping pong)

  Same thing applies to Server 2, 3, 4 and so on...

  Hope that's clear

• Oracle Internet Directory Config error Linux x 64 java.lang.NoClassDefFoundE

  Hello
  
  I'm configuration (v11.1.1.2) identity management product, the installation was very well made. I started to configure it using the config.sh script. I chose to create a new weblogic domain and selected to configure OID and OVD.
  
  I am running Red hat linux 5.4 x 64 bit OS.
  
  I gave all the parameters configuration, such as requested and if failure at the stage where it creates the Oracle Internet Directory store with the error in the log below:
  [2011-02 - 02T 18: 20:29.969 + 00:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM EVENT CONFIG] onConfigurationStatus-> ab274dda-a540-4666-bc1b-9d367b26b3b9 StatusMsg: {0} creation ASComponent.
  [2011-02 - 02T 18: 20:29.969 + 00:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] reportStartConfigAction: EXIT...
  [2011-02 - 02T 18: 20:29.969 + 00:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] beginning to create the component
  [2011-02 - 02T 18: 20:30.057 + 00:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] Action for the oid1 is to CREATE
  [2011-02 - 02T 18: 20:30.057 + 00:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] trying to create the oid1 component
  [2011-02 - 02T 18: 20:30.447 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] OID onCreate... [[
  
  ]]
  [2011-02 - 02T 18: 20:30.466 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] not a DB CARS: 10.23.74.119:1521:RMG
  [2011-02 - 02T 18: 20:30.467 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] DB connection string: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=10.23.74.119) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = RMG)))
  [2011-02 - 02T 18: 20:30.885 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] SCHEMA_VERSION_REGISTRY Control Panel...
  [2011-02 - 02T 18: 20:30.894 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] Version of the schema OID: 11.1.1.3.0
  [2011-02 - 02T 18: 20:30.911 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] Num of OIDs: 1
  [2011-02 - 02T 18: 20:31.029 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] TO validate input parameters
  [2011-02 - 02T 18: 20:31.097 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] Ports: nonssl = 3060 ssl = 3131
  [2011-02 - 02T 18: 20:31.097 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] directory specific OID creating
  [2011-02 - 02T 18: 20:31.098 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] JPS Files already exist: oracle.as.config.ProvisionException: Dest file (/ opt/oracle/middleware/asinst_1/config/JPS/jps-config-jse.xml) already exists.
  [2011-02 - 02T 18: 20:31.098 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] files already exist: oracle.as.config.ProvisionException: Dest file (/ opt/oracle/middleware/asinst_1/config/JPS/system-jazn-data.xml) already exists.
  [2011-02 - 02T 18: 20:31.674 + 00:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] []
  java.lang.NoClassDefFoundError: oracle/security/xmlsec/util/Base64
  to oracle.security.jps.internal.common.util.JpsCommonUtil. < clinit > (JpsCommonUtil.java:212)
  at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:155)
  at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:166)
  to oracle.iam.management.oid.install.wls.OIDComponentHelper$ 1.run(OIDComponentHelper.java:396)
  at java.security.AccessController.doPrivileged (Native Method)
  at oracle.iam.management.oid.install.wls.OIDComponentHelper.setCredInCSF(OIDComponentHelper.java:389)
  at oracle.iam.management.oid.install.wls.OIDComponentHelper.setPasswdsInCSF(OIDComponentHelper.java:361)
  at oracle.iam.management.oid.install.wls.OIDComponent.onCreate(OIDComponent.java:177)
  at oracle.as.config.impl.OracleASComponentBaseImpl.createComponent(OracleASComponentBaseImpl.java:596)
  at oracle.as.config.impl.OracleASComponentBaseImpl.create(OracleASComponentBaseImpl.java:105)
  at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:144)
  at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
  at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
  at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:358)
  at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
  at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:525)
  at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)
  at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
  at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:861)
  at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
  at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
  at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
  at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
  at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
  at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
  at java.lang.Thread.run(Thread.java:619)
  Caused by: java.lang.ClassNotFoundException: oracle.security.xmlsec.util.Base64
  at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionClassLoader.loadClass(StandardConfigActionClassLoader.java:75)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
  at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
  
  Help, please.
  
  If necessary, I can post the full log... but his very large... So just post newspapers around the error message...
  
  Published by: 833360 on February 2, 2011 10:59

  Hello

  Few things to check.

  What is the JDK/JRE Version.
  What is the version of WLS?
  From the error lines, I can see THAT RCU Version is 11.1.1.3.

  If the WLS version is 10.3.3, so it is not supported with IDM 11.1.1.2.

  Suggestions: update IDM to 11.1.1.3 and configure it. Here are the steps.

  -Cancel the Configuration Wizard, delete the directories of domain Instance ACE and WebLogic OR if it's on the virtual machine, you can return to the previous snapshot.
  -Update IDM in 11.1.1.3
  -Execute config.cmd or confg.sh

  Let me know the result.

  Thank you
  GK

• WRT1900ac - has no Config - error unexpected 2117 wireless bridge

  I'm having a problem connecting 2 routers together in Wireless Bridge mode WRT1900AC.  I followed the instructions here to step 7 (Clicked "Yes" to the "Warning" screen), and then I get this error:

  Unexpected Error
  
  2117
  
  We've encountered an unexpected error. If the issue continues, please visit our Technical Support site.
  
  Details
  
  /jnap/router/InitiateWirelessConnection -- Status: 200 OK Date: Sat, 18 Apr 2015 05:22:03 GMT Server: lighttpd/1.4.34 Connection: close Content-Length: 87 Content-Type: application/json; charset=utf-8
  

  

  This router is brand new.  The only things I've done are:

  1. Perform a router unboxing conversion
  2. Ignored configuration wizard
  3. Try to configure wireless bridge mode
  4. Received the error saying I need to reset the router to the factory settings
  5. Reset the router to the factory with the red button settings
  6. Router connected directly to the link upstream (cable Modem)
  7. Through the Installation Wizard
  8. Update the Firmware to the official version: 1.1.8.164461
  9. Has crossed the Bridge wireless installation Instructions here
  10. Got to step 7
  11. EU 'unexpected error 2117.

  I retried again and got a different error:

  

  I thought I would add another update here, given that the issue has been isolated and fixed:

  It turns out that plugging in the Comcast cable on the floor was very old, had a longer cable length, and was also on a split bar.  Called Comcast to help solve our problem, and they were able to test the intensity of the signal on the line.  Signal was not reliable on the cable on the floor, so we moved the modem more near the source of moving the cable (don't run, no separator, the best signal of shorter cable).  Upstream of the modem connection was immediately more reliable, moving router downstairs gives the best WiFi coverage for the rest of the House.  I have decided at this time that the extra router was not necessary and referred.  So, Detective Conan... problem was double: bad signal on the incoming line from Comcast and bad location for WiFi router upstairs.

• HA Config error - system esx 4

  Salvation communities,.

  Get the following error on a couple of my esx 4.1 hosts in one couple - others are ok

  When I configure HA - the following error message appears after a few moments:

  "cmd addnode failed for the primary node: error of creation of the virtual disk for the configuration of the HA agent: unknown error of HA.

  Any help appreciated

  NP Aneetu, glad that the re-join by worked - other parts may be messier to set

• Config error leads to unexpected problems during the duplication of a virtual machine

  I created a virtual of Mac OS X Server machine using Fusion 3 in Mac OS X Server.

  I wanted to copy the virtual machine and get two turn, so I have it duplicated via the Finder. I started copying, he said I had copied, and it worked very well. I changed some settings and went to open original. He complained that the disk was in use!

  I checked the config via a Show Package Contents and found that the scsi0.0.fileName had the FULL path to the file hard instead of a local path, so that both machines have tried to use the original copy of the disc, even if there is a second copy!

  By changing the path pointing to 'disk.vmdk' instead of ' / users/admin/Documents/Virtual Machines.localized/disk.vmwarevm/disk.vmdk ' copies now work and do not use each and other records.

  Perhaps, this should be filed as a bug? I don't know how to do this; or maybe VMWare Fusion needs a button "double VM".

  I used the wizard of "insert the disc and install" VMWare to create the virtual machine, if that helps.

  Yes, it is fine and should work; the behavior you're seeing is a bug. Thanks for reporting it! I filed PR 650449 to follow up on this matter.

• E.M.P. 11.1.2.2 Config Error - EPMCFG-10368: unable to connect to the database.

  Hello
  
  I found the error when configuring EPM 11.1.2.2 below system
  
  Error message indicated as "EPMCFG-10368: unable to connect to the database." Check the database connection information'.
  
  Environment: Windows XP SP2, SQL Server 2005.
  
  Please help me solve the problem. Please also find the screen shot to http://ge.tt/6xqpj0L/v/0?c
  
  Kind regards
  Naveen
  
  Published by: Naveen on July 25, 2012 17:35

  Windows XP is not supported for client components not, I recommend that you install on an operating system that is supported so usually, when there is trouble connecting to SQL Server, it is down from TCP/IP not been activated, also correct for a static port, make sure that no firewalls are in place.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• 10401 DIO port PCI-DIO-32HS config error

  
  
  

• ASA 5510 error in config

  After I upgraded my ASA to v7.0 (4) I noticed a mistake in the running-config ' ERROR: command requires the failover license "so I removed the interface of the monitor commands and sauvΘs mem but the declarations of the error remained in the running-config. I then copied the startup-config to my tftp server removed the statements of the error and copied then return. I rebooted the ASA and these same error message came back. I did a 'start of show err' and he returned without error. Can someone tell me how to get these messages out of my config.

  That you use in a cosmetic bug, nothing to worry about.

  See http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsc23718&Submit=Search for more details.

  This problem is fixed in 7.0 (4.2) draft code version, you can upgrade to the latest provisional version (7.0 (4.3), fully TAC supported) here:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/PIX-interim

  You can see in the Notes of all the bug fixes, including one you touch.

• Sysopt dnat error on the road when the upgrade

  I am trying to upgrade my PIX 515. I'm upgrading to 6.1 (2) 6.3 (4). After the upgrade and reload, I get a config error indicating that "no sysopt route dnat is obsolete. How can I get rid of this error on charging after the upgrade. I understand it's no longer use this type of sysopt.

  Thank you

  Mike

  write members

  The obsolete command is in your startup-config, save your running-config it will take off.

• Updated since CF10 CF11 error: configuration of page data are not valid.

  Anyone having problems with CF11 put cache files CF10 when they upgrade?  Where can I change the settings to the directory ColdFusion 11 rather than 10 ColdFusion?

  HTTP 500.19 - internal error in the server error

  The requested page cannot be accessed because the configuration data of the page are not valid.

  Module	IIS Web Core
  Notification	BeginRequest
  Handler	Not yet determined
  Error code	0 x 80070003
  Config error	Cannot read the configuration file
  Configuration file	\\?\C:\ColdFusion10\cfusion\wwwroot\ipmcenters_org\web.config

  When you were on 10 ColdFusion, were serve you content in ColdFusion web root (\ColdFusion10\cfusion\wwwroot\...)?  This seems to be the case based on the above error.  If you use IIS, you should not use the sites off ColdFusion web root.  If you have to, use IIS web root (C:\inetpub\wwwroot), although it is best to put your files on the web on a completely different disc of your OS (and ColdFusion must be it's own separate disk).  So here's what I do (based on the different ColdFusion lockdown guides):

  C: - OS file

  D: - Installing ColdFusion (D:\ColdFusion10\...)

  E: - websites (E:\WebSites\site1, E:\WebSites\site2, etc.)

  The web.config file is an IIS configuration file (and the HTTP 500.19 error comes to IIS).  This indicates that your IIS site configuration is probably at fault.  You can take things apart and rebuild the site by lockdown CF11 guide and rebuild the site in IIS as a result.

• Error loading configuration in the repository data

  Hi all.
  I installed Oracle 11 g R2 on Windows 2008 Server.
  After that, I can't download the agent for a database.
  Any comments please.
  Thank you for your comments advense.
  Here is the Log file:
  
  .......
  ......
  ....
  .....
  March 9, 2011 14:19:46 oracle.sysman.emcp.EMReposConfig unlockMGMTAccount
  CONFIG: Discover sql user: declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end;
  March 9, 2011 14:19:46 oracle.sysman.emcp.ParamsManager getParam
  CONFIG: No value has been set for the ORACLE_HOSTNAME parameter.
  March 9, 2011 14:19:46 oracle.sysman.emcp.util.PlatformInterface executeCommand
  CONFIG: Begin execution: CMD /C D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts\emca\emcaDbUtil.bat "D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts;D:\app\DBAdministrator\product\11.2.0\dbhome_1\bin"; D:/app/DBAdministrator/Product/11.2.0/dbhome_1/perl/bin\perl.exe D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts\emca\emcaDbUtil.pl D:\app\DBAdministrator\product\11.2.0\dbhome_1 "(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = FinaOra-ground)(PORT=1521))) (CONNECT_DATA = (SERVICE_NAME = finaoradb)))" SYS SYSDBA declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end; FINAORADB 1 SYSMAN_PWD
  March 9, 2011 14:19:49 oracle.sysman.emcp.util.PlatformInterface executeCommand
  CONFIG: Output value 0
  March 9, 2011 14:19:49 oracle.sysman.emcp.util.PlatformInterface executeCommand
  CONFIG: Running CMD /C D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts\emca\emcaDbUtil.bat "D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts;D:\app\DBAdministrator\product\11.2.0\dbhome_1\bin"; D:/app/DBAdministrator/Product/11.2.0/dbhome_1/perl/bin\perl.exe D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts\emca\emcaDbUtil.pl D:\app\DBAdministrator\product\11.2.0\dbhome_1 "(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = FinaOra-ground)(PORT=1521))) (CONNECT_DATA = (SERVICE_NAME = finaoradb)))" SYS SYSDBA declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end; FINAORADB 1 SYSMAN_PWD completed successfully
  March 9, 2011 14:19:49 oracle.sysman.emcp.util.PlatformInterface executeCommand
  CONFIG: Arguments passed D:\app\DBAdministrator\product\11.2.0\dbhome_1 (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = FinaOra-ground)(PORT=1521))) (CONNECT_DATA = (SERVICE_NAME = finaoradb))) SYS SYSDBA declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end; FINAORADB 1 SYSMAN_PWD
  
  Connect to the database using string (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = FinaOra-ground)(PORT=1521))) (CONNECT_DATA = (SERVICE_NAME = finaoradb))) D:\app\DBAdministrator\product\11.2.0\dbhome_1 House with the role of 'SYS' user 'SYSDBA '.
  connected to the database.
  To run SQL declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end;
  noOfParams to bind: 1.
  run SQL.
  
  March 9, 2011 14:19:49 oracle.sysman.emcp.EMReposConfig unlockMGMTAccount
  CONFIG: Account unlocked mgmt_view
  March 9, 2011 14:19:49 oracle.sysman.emcp.EMReposConfig invoke
  CONFIG: Managed to unlock mgmt_view account
  March 9, 2011 14:19:49 oracle.sysman.emcp.ParamsManager getParam
  CONFIG: No value has been set for the ORACLE_HOSTNAME parameter.
  March 9, 2011 14:19:49 oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
  INFO: Download of the configuration in the repository of EM data (this may take a while)...
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
  CONFIG: Error loading configuration in the repository data
  oracle.sysman.emdrep.config.ConfigurationException: FATAL Exceptions of Configuration
  
  at oracle.sysman.emdrep.config.EMSchemaConfiguration.perform(EMSchemaConfiguration.java:232)
  at oracle.sysman.emcp.EMReposConfig.uploadConfigDataToRepository(EMReposConfig.java:699)
  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:385)
  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
  at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
  at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
  at oracle.sysman.assistants.util.em.EMConfigStep.executeImpl(EMConfigStep.java:139)
  at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
  at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:251)
  at oracle.sysman.assistants.dbca.backend.PostDBConfigureStep.executeImpl(PostDBConfigureStep.java:269)
  at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
  at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
  to oracle.sysman.assistants.util.step.StepContext$ ModeRunner.run (StepContext.java:2667)
  at java.lang.Thread.run(Thread.java:595)
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMReposConfig invoke
  NEWS: Check the log to D:\app\DBAdministrator\cfgtoollogs\emca\finaoradb\emca_repos_config_ file < date > .log for more details.
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMReposConfig invoke
  SEVERE: Error download configuration in the repository data
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMConfig perform
  SEVERE: Error download configuration in the repository data
  See the log file at D:\app\DBAdministrator\cfgtoollogs\dbca\finaoradb\emConfig.log for more details.
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMConfig perform
  CONFIG: Stack Trace:
  oracle.sysman.emcp.exception.EMConfigException: error loading configuration in the repository data
  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:397)
  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
  at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
  at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
  at oracle.sysman.assistants.util.em.EMConfigStep.executeImpl(EMConfigStep.java:139)
  at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
  at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:251)
  at oracle.sysman.assistants.dbca.backend.PostDBConfigureStep.executeImpl(PostDBConfigureStep.java:269)
  at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
  at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
  to oracle.sysman.assistants.util.step.StepContext$ ModeRunner.run (StepContext.java:2667)
  at java.lang.Thread.run(Thread.java:595)
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMConfig restoreOuiLoc
  CONFIG: Restoration of oracle.installer.oui_loc to D:\app\DBAdministrator\product\11.2.0\dbhome_1\oui

  PL see MOS Doc 1233913.1 ("error downloading Configuration for the data repository" when you configure dbconsole) for the solution

  HTH
  Srini

• Creation of the HFM 9.3.1 Application error

  I'm having a problem with workspace. Whenever I tried to open an applicaation which is already registered in the SSP, I receceived this error 'Please make sure that the application you are trying to launch is registered with shared services. Also, I received this error 'config.error.required credentials' when using Weblogic 9.2.
  
  Any help would be greatly appreciated.
  
  Note: My operating system is Windows 2000 Advanced Server and MSSQL 2000

  You need not really "" Weblogic, try using Apache, and then run the configuration utility to redeploy your servers.

• lockprefs for firefox 6 mac

  We need as long as University to lock some prefs on lab machines have made the following files in /Applications/Firefox.app/Contents/MacOS/
  Firefox.cfg

  // Keywords are case sensitive - get them wrong and firefox
  // will whinge about a config error and not load.
  //
  // pref		: user can override for current session
  // defaultPref  : user can override permanently
  // lockPref     : user can't change
  
  // set home page - this doesn't work very well as a default so
  // we use ./browserconfig.properties to set instead
  //defaultPref("browser.startup.page", 1);
  //defaultPref("browser.startup.homepage", "http://ourhomepage/");
  
  // disable firefox welcome page on 1st run or upgrades
  lockPref("browser.startup.homepage_override.mstone", "ignore");
  
  // tabs
  defaultPref("browser.tabs.warnOnClose", false);
  defaultPref("browser.tabs.autoHide", false)
  
  // downloads
  defaultPref("browser.download.useDownloadDir", false);
  
  // disable the proxy settings
  lockPref("network.proxy.type", 0);
  
  // security
  lockPref("xpinstall.whitelist.required", true);
  
  // cache size
  lockPref("browser.cache.disk.capacity", 5000);
  
  // flush cache on exit
  lockPref("privacy.sanitize.sanitizeOnShutdown", true);
  lockPref("privacy.sanitize.promptOnSanitize", false);
  lockPref("privacy.item.cache", true);
  pref("privacy.item.history", false);
  pref("privacy.item.downloads", false);
  pref("privacy.item.formdata", false);
  pref("privacy.item.cookies", false);
  pref("privacy.item.passwords", false);
  pref("privacy.item.sessions", false);
  
  // disable updates
  lockPref("app.update.enabled", false);
  lockPref("extensions.update.enabled", false);
  lockPref("browser.search.update", false);
  
  // disable anti-phishing/malware (NH20101103)
  // workaround the crap google database download
  // that creams the nfs homespace server
  lockPref("browser.safebrowsing.enabled", false);
  lockPref("browser.safebrowsing.malware.enabled", false);

  and a browser configuration

  BrowserConfig.Properties
  > ^ ^ v? Browser.Startup.Homepage = http://ourhomepage

  browser.startup.homepage_reset=http://ourhomepage
  

  and also created dir greprefs with

  _config.js

  pref("general.config.obscure_value", 0);
  pref("general.config.filename", "firefox.cfg");
  

  If this does not work then place the _config.js file in the folder by default/prefs where you will also find channel - prefs.js