Cypress of the touchpad XPS 15z Windows 8 (workaround Solution)

Similar Questions

• XPS 15Z Windows 8 unknown device on PCI Express Root Complex

  Hi, I have a Dell XPS 15Z, which I bought off a friend. They have recently updated to Windows 8 and now, that's what I have. But when I go into my sound drivers telling me I have an unknown driver. some online solutions responded to my questions even though some came close. So, here's what I know:

  Unknown device

  Type of device: other devices

  Manufacturer: unknown

  Location: on PCI Express Root Complex

  Hardware ID:

  ACPI\VEN_SMO & DEV_8800

  ACPI\SMO8800

  * SMO8800

  I don't know if it's related, but my laptop also does not load. I just bought a new AC adapter to replace the one I had, and it is not yet supported. The light flashes red 4 - 5 times and blue/green once. Ive looked online to see what the problem is, but I can't do some of the patches that the computer is at 0% battery.

  The hardware ID, it is the free fall sensor:

  Windows 8.1 driver is here: http://downloads-us.dell.com/FOLDER01687839M/2/FreeFallSensor_ST%20Microelectronics_W814_A00_setup-FMMHJ_ZPE.exe

  The Windows 8.0 driver is here: http://downloads-us.dell.com/FOLDER00951951M/6/FFS_ST_W78_A00_Setup-KT7XG_ZPE.exe

• Satellite A300-1EG: problem with the touchpad after installing Windows 7

  Hello!

  I had a problem with my touchpad since I installed Windows 7 (64-bit version) on my laptop (Toshiba) A300-1EG.

  I tried many different solutions to this problem.
  I checked the alignment of the touchpad (be it on) in the BIOS, I tried to install several drivers (on a site of Synaptics, automatically by Windows) and none of these work. Of course, I tried FN + F9 key combination.
  When I check the alignment of the touchpad in the Control Panel, everything seems fine. It is written, that "device working properly.

  I have Toshiba Software, what may be the cause of the problem?
  But I have no idea where I can find something.

  I'd appreciate any help.

  I hope to be understandable - English is not my mother tongue :) Thank you very much in advance for any ideas. :)

  Hi mate

  I'm not quite sure what problem you have but you should first try to install the necessary drivers touchpad m.
  Maybe you used the wrong driver in the past

  So Sat A300-1EG belongs to the series of PSAG4E.
  The European driver Toshiba page does not provide a special touchpad driver for Win 7 for this device.

  But I noticed that Win 7 64 bit drivers touchpad (Alps & Synaptics) for Satellite L500 PSLS3E series is released on the European driver page.
  Try both drivers Touch Pad for this device and test it!

  Welcome them

• How can I disable the touchpad on laptop Windows 8 Lenovo

  I did several searches and can't seem to find a way to turn off my touch pad on my laptop Lenovo. I recently updated my laptop with Windows 8, so I don't know if this has anything to do with it.

  My computer laptop lenovo I had to install the driver Synaptics support pages of Lenovo to my Fn + F6 combination of keys to work & turn the touchpad on or off but quickly discovered that it reactivates each time it starts so I had to open the mouse in the control panel and Synaptics window, there is a big disable button that permantly disables once connected to this user account , but otherwise his license... which is a good thing if a problem at the start.

• HP Pavilion: activate the touchpad while typeing windows 8.

  Hi I have a Hp pavilion and I noticed that when I type my touchpad turns off... I heard one solution is to disable the check of palm, but I can't find this option. What is no idea what to do now please help!

  Hello

  SmartSense is almost identical to Palm check, so turn off should allow you to use the keyboard and the touchpad at the same time - just click on the "gear" beside SmartSense, adjust the slider to turn it off, click close and then click on apply to save the change.

  Another parameter in Windows 8/8.1 you can also check is as follows.

  In the bar of charms, click setting and select change PC settings.

  PCs and devices, and select mouse and touchpad.

  Under the touchpad, select "no delay (always enabled) in the menu dropdown.

  Kind regards

  DP - K

• Pavilion 15-p148ne: 15-p148ne of the touchpad synaptic for windows 7 64 x ASAP

  Hello team hp,

  I can't find driver hp 15-148ne synaptic touch pad for win 7, I tried the win driver 8 but it's not compatible.

  Thank you

  Thanks, my problem has been solved

  The solution is:

  http://www.Synaptics.com/en/drivers.php

  Synaptics have a master driver, its a good way.

  Thanks synaptics...

• 230 portable x - how to disable the touchpad Windows 8 gestures

  no idea how I can stop the touchpad to launch Windows 8 charms bar when there is a hit on the right side of the touchpad?  In addition, drag from left to right on the left side of the touchpad app switching begins.  It is a pain that working me inside an application (e.g. web browser) using the touchpad I will accidentally move apps frequently.  How I disabled?  I could not find a setting in the ultranav software provided with the laptop.

  In case anyone wants to know, here's how to disable the functionality of Windows 8 landslide:

  You must change the following registry keys to the following:

  Windows Registry Editor Version 5.00
  [HKEY_CURRENT_USER\Software\Synaptics\SynTPEnh\ZoneConfig\TouchPadPS2\Right Edge sweater]
  "ActionType" = DWORD: 00000000
  [HKEY_CURRENT_USER\Software\Synaptics\SynTPEnh\ZoneConfig\TouchPadPS2\Left Edge sweater]
  "ActionType" = DWORD: 00000000
  [HKEY_CURRENT_USER\Software\Synaptics\SynTPEnh\ZoneConfig\TouchPadPS2\Right Edge traction extended area]
  "ActionType" = DWORD: 00000000
  [HKEY_CURRENT_USER\Software\Synaptics\SynTPEnh\ZoneConfig\TouchPadPS2\Top Edge sweater]
  "ActionType" = DWORD: 00000000

• Laptop HP TS with Windows8 - how can I disable the touchpad mouse?

  Just got this phone yesterday so there is no way to disable the touchpad mouse and it is just in the way I have to hold my hands to a heavy of angle to not activate. I put the answer as long as it allows, but for some reason any does not allow me to disable the stupid thing. HELP Please!

  Hi @kewlbloos

  Welcome to the HP Forums!

  This is a fantastic place to find answers and solutions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you would like to know how to disable the touchpad in Windows 8.  Here is a link to help you with this.

  HP laptops - use and troubleshooting of the TouchPad and ClickPad (Windows 8). Please note the section on a TouchPad and ClickPad activation in Windows 8.  In the diagram, you will notice the disable button you can select.

  Good luck!

• Laptop Acer V3 - 571 will not get increased from 22% of the anniversary "Update" for Windows 10 part of the installation

  I have an Acer laptop V3-571, initially w / Windows 7 Home, which I've updated to Windows 10. Site Acer says that this laptop will support the 10 anniversary Win update.

  Tried to download the update of the anniversary online, but came back to win 10. Switched to Windows Media Creator for the next download attempt, I uninstalled my avast! Internet security. Back in return once again. Then reused Win Media Creator (after I deleted also Malwarebytes Anti - malware & also Anti-Exploit SuperAntiSpyware & Malwarebytes. After fully downloading birthday update (Win 10 AND updates), came after new Win 10 and 22% of updates. And here AGAIN once I had turned off the Bluetooth drivers, I have downloaded the update of the birthday & again once the mark of 22%, the updates to the new download to win 10 birthday, my machine back the previous Win 10.

  Someone at - he heard of this? Any suggestions?

  What's the brand of 22% the machine restarts (which is the second restart during the installation of birthday) and shows that my machine is back to the previous version of Windows?

  Thanks in advance.

  To clarify: after the anniversary update all downloads without problem, the anniversary part of Windows 10 installs without problem. Then "Updates" to begin the installation, at the helm of the 22% of these "Updates" install, the machine restarts and returns to the previous installation of Windows.

  SOLUTION: Finally, yesterday, I downloaded new drivers for Bluetooth USB Module and Intel(r) HD Graphics 4000. In addition, w / my free all search app, pulled up to Windows.old and renamed Anything.old (read on a forum that helped rename Windows.old with any word to replace the word "Windows"). Whether updated drivers and/or the name change, the downloaded Windows Media Creator & the birthday. installed update w / no. HARM my computer or any partition, including the partition w / Ubuntu. End

• XPS 15z Cypress Trackpad drivers on Windows 10

  Hi all

  even if my XPS Dell 15z has not officially tested for Windows 10 and probably never will be tested, I've upgraded to Windows 10 yesterday.

  Everything seems pretty fine, with the exception of the (still horrible) Cypress Touchpad.
  This is what happened:

  1. after the upgrade is complete, I found that Windows has installed the Synaptics Touchpad drivers.
  2. my trackpad has worked, with the exception of no multi touch gestures.
  3. I uninstalled all drivers, cleaned the files + registry via CCleaner and restarted every time as needed
  4. I installed the drivers that I learned from this post: en.community.dell.com/.../19579806
  5. I checked if two-finger-scroll has been enabled in the driver configuration utility, checked and unchecked the boxes several times
  6. I tried all kinds of other bug fixes for the infamous Cypress Trackpad in Windows 8 pilot and so on

  Overall, nothing is done - in addition to the basic features that the generic driver provides also, I have absolutely no gestures of support. Just the driver doesn't seem to work at all, despite running in the background.

  There seems to be similar problems with the Synaptics drivers, just that there seems to be some bugs for her.

  I have absolutely no hope that Dell will come out a driver halfway decent for this piece of junk they call a trackpad, but perhaps that other users have an idea on how to solve this problem.

  Greetings

  Chris

  PS: I didn't forget, support and usability of this missing trackpad is the main reason stopping me to buy any product Dell anytime soon. It's the kind of thing, what makes people buy MacBooks.

  annyning

  I upgraded my XPS 15z successfully a couple of days

  Can you let us know if the Touchpad of Cyprus of the L321x/L322x works on your L521x?

  http://downloads.Dell.com/FOLDER03187577M/1/Input_Driver_VYVMP_WN32_2.5.1.72_A00.exe

• XPS 15z, 10 Windows drivers?

  Will there be a Windows 10 for XPS 15z driver support? If this isn't the case, think of it. And please do good, because the drivers for Windows 8 were incomplete and some of them, like Intel HD Graphics, poorly written (blinking at the top of the screen, slow initialization start up screen...), I had to roll back to Windows 7. As the rumors, Windows 7 and 8 users will get free upgrade to Windows 10, so please release Windows 10 drivers. I don't want to miss this opportunity.

  Well the warranty service technician Dell phone told me that the odds were 90% that Dell could not be updated drivers for XPS 15z.

• FN + F3 disable the Touchpad does not work. Dell XPS L702X

  Hello, I am new to this forum.

  The function FN + F3 that disable the Touchpad does not work, my laptop Dell XPS 17 (L702X)

  I googled my problem and the only thing I found was this: http://en.community.dell.com/support-forums/laptop/f/3518/t/19454265.aspx

  I think that my problems with the touchpad started when I plugged a mouse into the USB port. It didn't work (it worked well before), and in material-sound-mouse control panel, the system asked me to uninstall a driver or other. I do not remember, but later the mouse worked.

  After this weird thing with the mouse, I noticed that the touchpad was malfunctioning. While I write, the cursor moves without touching the touchpad, it is annoying because it makes me write bad because he is moving in the middle of writing, as I write so it's a mess.

  The second oddity, the Fn + F3 does not disable the touchpad, the orange light come on (the led on the top of the touchpad), but the cursor can be moved in any case, with or without a connected mouse.

  I checked for driver updates, perform an audit of the system, checked for viruses, spywares and I don't know what I could do. I don't know if the problem with the mouse had nothing to do with the function Fn + F3 problem.

  I have not formatted or re installed windows 7, never.

  In Device Manager I have this:

  -mouse and other pointing devices:-Compatible PS/2 mouse

  Help, please. Thank you.

  DOH! Problem between Chair and keyboard...

  C:\dell\drivers\R289237

  Run the executable file of Synaptics.

  Download of extracts only the program on your disk. You must manually install the driver for the Synaptics touchpad with its own executable.

  FN + F3 now disables =)

• The touchpad scrolling does not work after upgrade to Windows 10

  Hello world

  I used everything on my laptop Satellite uninstalled and reinstalled Windows 10.

  Now, toshiba applications disappeared.
  This isn't my problem.

  My problem is that on my touchpad scrolling is not working.
  Synaptics is gone and when I try to install a new driver (Touch Pad driver) it gives an error after installation.

  Synaptics is installed accept for the uttilities mouch.

  Someone can help me.

  Greetings, Jiska

  I don't know what model of laptop you have, but it turns out that not all series of phones are supported to win 10 upgrade.
  In this case Win 10 drivers will not be released on such unit...

  The touchpad scrolling requires additional touchpad driver...
  If your device supports Synaptics touchpad, you can also use the driver for the Synaptics driver page:
  http://www.Synaptics.com/en/drivers.php

  But currently driver to Win 10 is not available... you can try to install and to use the Win 8.1 driver but I'm not sure if it will work properly...

• How to disable the touchpad in windows 8 - Pavilion g6

  How to disable the touchpad in windows 8 - Pavilion g6

  Welcome to the forum, Sally.

  There are several ways to do this - method you choose may depend on what you need to accomplish.

  Follow a few ideas.

  • A double tap farm in the upper left corner of the touch pad if it off for a single session.

  Enable / disable

  Control Panel > display icon > mouse > Settings of TouchPad > click on "enable TouchPad.

  They continue parameters to install and configure the TouchPad as you like it...

  ==========================================================================

  A method that works with the pilots 'old', it is a failure of session by session...

  Make sure this setting is ON / CHECKED:

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  () repeat) TouchPad settings (button) > click tapping >

  Click the shimmering blue wheel

  In "box to Disable TouchPad settings".

  CHECK "Double Tap to activate / disable the TouchPad.

  In the 'Action in the upper left'

  CHECK "Disable the TouchPad during a session.

  Close

  Ok

  
  NOTE that, if it is available on your version, you can select to "turn off the TouchPad" - that's fine, unless something goes wrong.  You could get stuck without your USB mouse AND no way to return to the setting to activate the touchpad.  I don't know if I would use this setting.

  ======================================================================================

  Next...
  Latest drivers (V16.x) have the ability to disable the TouchPad / click on the keypad with a setting on the main page 'Settings' when a USB mouse is used.  This is a very nice feature.

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  CHECK "disable the pointing device internal when the external USB pointing device is attached.

  If you want to be alerted and see a visual cue of disability >

  TICK "Animated icon in the taskbar" >

  and make sure you have your updated task bar notifications so you can see the view of the mouse.

  

  =====================================================

  I hope this helps!

• Re: Satellite Pro U500-1DK - utility to toggle the touchpad for Windows 7 64-bit

  Hello

  From laptops while with the "Touch Pad on / off Utility" to control the touchpad "start/stop" button located just above the touchpad, I accidentally uninstalled it and can't find it in the list of drivers.

  I noticed that there is a version of XP but not the version of Windows 7.

  Can someone help me?

  Kind regards
  Chris

  Hello

  Why you uninstalled this tool if you need?

  In any case, for Windows 7, you need the added value package tool. After the new installation of VAP, the pad touch power button should work fine again.

  Check this box!