The touchpad scrolling does not work after upgrade to Windows 10
I used everything on my laptop Satellite uninstalled and reinstalled Windows 10.
Now, toshiba applications disappeared.
This isn't my problem.
My problem is that on my touchpad scrolling is not working.
Synaptics is gone and when I try to install a new driver (Touch Pad driver) it gives an error after installation.
Synaptics is installed accept for the uttilities mouch.
Someone can help me.
I don't know what model of laptop you have, but it turns out that not all series of phones are supported to win 10 upgrade.
In this case Win 10 drivers will not be released on such unit...
The touchpad scrolling requires additional touchpad driver...
If your device supports Synaptics touchpad, you can also use the driver for the Synaptics driver page:
But currently driver to Win 10 is not available... you can try to install and to use the Win 8.1 driver but I'm not sure if it will work properly...
XW4300 workstation has been recently updated to Windows 7 from XP pro. After the update, the system clock did not keep accurate time, then I entered the BIOS Setup and set the time here. After several hours, I rebooted, entered the BIOS configuration and noticed clock BIOS had not changed. I replaced the CMOS (CR2032) battery with three different batteries and BIOS clock does not always change.
Occasionally, Windows 7 system clock will synchronize to the BIOS clock, which creates the incorrect time in Windows. I can see these events in the system event log.
Is it possible that this problem is related to the Win 7 upgrade, or is it a problem without a report? Suggestions to control or fix the BIOS clock beyond what has been done so far? If I can't fix the BIOS clock, is it possible to prevent the synchronization of the clock in the BIOS Win 7?
Replace the jumper CLRCMOS or CLRRTC to its original position after erasing the CMOS memory and flashed the BIOS? If you do not then the time will be reset whenever you turn off the PC.
I have not found a CLRRTC jumper on the 4300. Is there a jumper to reset the password (E49), and a CMOS reset button.
However, I tried to reinstall the battery with power supply cable disconnected, and it reset the CMOS all anyway. Reset the CMOS seems to have solved the problem. BIOS clock has now begun to follow the exact time again. I rebooted several times now, and the time is now correctly.
Thank you all for your suggestions.
My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.
The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools
You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.
My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck
What does it mean exactly when you say he won t work?
You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?
At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.
I upgraded the PC host, but also virtual machines to Windows Pro 10.
TheVMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10...
Is this a known issue?
I uninstalled VMware Player, including the abolition of the configuration files.
re-installed VMware Player and it worked!
I need help, vertical and horizontal scrolling does not work after the computer wakes up to the top of falling asleep or hibernating. When I initially start the computer since the closure it works and it works again when I restart the computer. I know how to change the settings for it, like one or two fingers to scroll and it turn on or turn off, but the settings are correct and scrolling still doesn't.
My computer is a HP Pavilion dv6 (VX070AV) and only 3 days.
You have tired of the touchpad driver update? I guess you are going to have Version 220.127.116.11
Here is the link, just in case... http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-85175-1&LC=en&DLC=en&cc=us&OS=4063&product=4221638&sw_lang=
Hello, I upgraded a laptop for Windows Vista 8 and family safety works more fully.
I have updated to the 2012 essentials and I can confirm that parental control is executed. App and time restrictions still work fine, but the filtering of the web site does not work.
I have web filtering set to allow list only, with 3 sites listed - google, Wikipedia and BBC - but I can access all of the web content.
I also tried to delete the files in ProgramData/Microsoft/Windows/Parental Controls such as suggested in other posts, but it did not work.
I can also confirm that WpcMon.exe is running.
Can you advise what could be the problem?
Thank you for coming back. Please note that the parental control is now integrated in Windows 8. The use of the parental control client that is included in Windows Essentials might not work properly. As before, you upgrade using Windows Vista, you can follow the steps described in this article (click on parental controls) to move properly the configuration of the client of parental control for the parental controls feature integrated in Windows 8.
Note: Article also applies to Windows Vista.
Please report if you need help.
My microphone does not work in any software after the upgrade to windows 10. Stakeholders do not seem to work.
The device says the latest drivers are installed (Conexant SmartAudio HD). I uninstalled and reinstalled, but the microphone still does not work.
Solved it by downloading the latest drivers finally found here, not the default driver installed by windows 10 who said he was the most up to date.
My card reader SD HP Pavilion dv6 does not work after windows 8 upgrade (6 months ago). Previously, it was working fine when I was with Win 7 (which is the default OS with this laptop). I don't find the device in Device Manager (under the peripheral system or hard drives). Read the similar section in the HP forum, but it did not help as much as the device is missing in this case. Can anyone help?
Install the driver from Realtek for Windows 8 card reader.
Please post your results.
I use a computer hp laptop pavilion. My wifi button stopped working after the upgrade to Windows 8. I installed the latest drivers wifi but the wifi button does not work on wifi. Help, please
I use a hp pavilion dv6 7030ei.
I solved the problem of my wireless button not switching not wifi enabled or disabled. My laptops wifi button now works perfectly.
I have has been Manager of access devices, then selected, network adapters
-Click with the right button on intel Centrino Wireless - N 2230,
-then click on uninstall and then uninstall. Restarted my PC.
Then bang! my wireless button started working! I don't update this driver up to what Microsoft or intel acknowledges this problem caused by the wifi drivers 8 windows and provides an updated driver that is causing the problem I encountered.
Thank you all for your comments.
I can't get my card reader works after upgrade to windows 10 64-bit...
Device Manager gives me return error Code 48, tried to install different drivers, I have found for Realtek PCIE Card Reader... None of them work...
"Code 48: the software for this device has been blocked from starting because it is known to have problems with Windows.
Have you ever tried the Realtek website?
Please uninstall the driver installed before installing this, on right click Device Manager, choose uninstall, and check the box uninstall the software too.
I have the Z410 (2 years) and since the upgrade to Windows 10, the TouchPad does not work!
- I updated the driver with no luck to make it work.
- Solutions used Lenovo Center, digitised material and nothing shows a hardware or driver missing.
- In Device Manager it shows any missing material.
- Settings > devices > mouse & Touchpad... The touchpad tab shows her where this versioned (Alps Touch Pad - 8.201.1611.252)
After the upgrade of the W10, BT did not work so I updated the drivers Atheros AR3012 version 10.0.1.1
It still does not work. My phone can see the laptop on BT, but says that he cannot communicate with him.
The laptop does not tosee phone & Yes the phone is discoverable. My BT headset can not be seen now by phone.
All this worked fine with W7
My laptop is Satellite L850 (PSKDLE)
In most cases, BT does not work due to lack of BT software.
I guess you will need to install the filter for the BT driver package.
In most cases the 8 Win / filter package 8.1 Bluetooth driver should work under Win 10... Then try to install the Atheros Bluetooth driver filter package and check to see if you will be able to activate BT
After the upgrade from Windows 7 to Windows 10, internet Wifi don't work do not. Unrecognized WiFi. Seems that the driver for the wifi does not work with windows 10. Any ideas please?
It seems that the problem of driver. You should installed driver WiFi for window 10.
After the upgrade to Windows 10 Wireless does not work, even if the wireless symbol F12 shows blue. In the network settings, the wireless switch exhibits & cannot be turned on to.
This feature worked perfectly in Windows 7
Thanks for the actual name of the product from your laptop.
Let me take a look.
I will edit this thread to let you know what I found.
The Intel Centrino Advanced - N 6230 is a wifi adapter that is compatible with your book which has Windows 10 drivers available. the driver is on the following link.
You can replace yourself because it is easily accessible after removing the cover of the hard drive Bay. See page 21 of the manual at the following ADDRESS. http://h10032.www1.HP.com/CTG/manual/c02842278
I saw them on eBay for @ $20.00 USD
Maybe you are looking for
Hello I currently have a computer toshiba laptop A665-15U with an nvidia GT 330 M and an acer hd5360 projector.After checking on the nvidia site, GT 330 M working with 3D and my projector is also compatible with 3D.I also have the vision 3D Kit 2. Th
In recent days I constantly receive a 'Safari quit unexpectedly when you use the plug-in mmhk.» Click to open the application. This report will be sent to Apple. » What is the cause and how to fix it? Thank you
I can't turn on windows deffender.
I have a laptop Pro Win 7 x 64 - Home Premium upgrade - and it seems a previous user (no longer exists) set different security policies, including the length of the password, complexity, etc., that I am unable to change. I can log on as an administra
my adobe photoshop cs6 is absent from all the tools of healing spots. I'm completely lost...