.d1c__... _ 0. __. could not open the _ _ _ .doc files

Similar Questions

• Could not open the dialog box of .msi files saying find a program to open the file type

  In time, I used msi files to install many programs. But I know longer really since then, msi files could not open. Now, I can't open the msi installer, which I had used to install programs. When I click on the msi file, it displays a dialog box saying find a program to open the file type.

  Hello

  1. Were there some recent changes to the computer before the show?

  Method 1: I suggest you unregister and re - register the windows setup program and check if that helps you. To do this, please follow the steps below:

  Unregister and register the Windows Setup program again

  (a) click Start, click run and then type cmd in the dialog box, and then click command prompt.

  (b) at the command prompt, type the following and press ENTER after each line:

  MSIExec /Unregister

  MSIExec/regserver

  Method 2: When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program.

  http://support.Microsoft.com/kb/950505/

  Method 3: Change default programs using Set Program Access and computer defaults:
  http://Windows.Microsoft.com/en-us/Windows7/change-default-programs-using-set-program-access-and-computer-defaults

  Changing the programs Windows uses by default: http://windows.microsoft.com/en-US/windows7/Change-which-programs-Windows-uses-by-default

  Hope this information is useful.

• Could not open the InDesign-missing plugin message file

  Hello

  I have CS5 on my machine. I was sent a CS5 to work on through a file transfer. I can't open it. I get a message window that says Missing plug-in: SharedContent.InDesignPlugin the "SU16_66" document... INDD"uses one or more plug-ins that are not currently available on your system. You want to open anyway. When I click on Yes it doesn't let me open the file. It gives me this message. I tried to re - move it 3 times. This is a test for a possible job, I need to get this open!

  

  It can sometimes work if CS5 was already on the computer when you upgraded to El Capitan. If it works for you, more power to you.

  It does work for the majority of users. It almost never works if you install CS5 on El Capitan.

• Could not open the new mk3 canon RAW files or old files mk1

  I have imac os 10.6 also photoshop cs8 (?) 2003 and cannot open RAW old or new files. Tried to download 6.7 camera raw but got message 'not applicable to you' what continues?

  Lightroom4 installation help?

  I think you talking about CS, which is version 8.  which only supports Camera RAW 2. #.  What you could do is to use the closure of the activation for CS2 server and older and install CS2

  https://helpx.Adobe.com/Creative-Suite/KB/Creative-Suite-2-activation-end-life.html

  However, it will still raise only your version of Camera RAW for 3. #.  We have no indication as to what your from the camera RAW files.  1DMK3? 1DsMK3? 5DMK3?  We'll bet it's the 5DMK3.  The table below tells us you need 6.7 which not is not compatible with your version of Photoshop, but you mentioned Lightroom 4 and which would open 5-3 files.

  Devices supported by Adobe Camera Raw

  

  So you should use the free DNG Converter

  https://helpx.Adobe.com/Photoshop/digital-negative.html

  The original 5 d need ACR 3.3, so you would be able to process files from this camera directly _if_ you install CS2.

  Good luck

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• Satellite U405 - S2833 Fingerprint error: could not open the sensor

  Hello, I am very new to the forums so I apologize in advance if I don't give all the necessary accurate information in this thread.

  I have a Toshiba U405-S2833 and it came with the TrueSuite Access Fingerprint Software.

  I downloaded an update a few days ago, but I don't remember if it's for Vista or Toshiba. Since then, my fingerprints were all removed from the system, and when I try re - save, I get this error message "error: could not open the sensor" I can't find the material to fix the sensor manually without going through the TrueSuite software.

  Any help would be greatly appreciated.
  Thanks in advance

  I am also having the same problem.

  My boss uses a Satellite U405-2628 fingerprinting and with the sensor TrueSuite Access Manager. It worked fine, then I updated windows and it has stopped working. I was on the updates and noticed an update of TrueSuite and thought that maybe that was messed up things.

  Then there were other issues that went past me locked out of the machine (anti-virus and loss of relationship with the field... also my fault). So I decided to wipe the machine and install fresh Vista.

  I installed everything but the TrueSuite software still not able to open the sensor. After hitting my head on it, I decided enough was enough and I restored it using Toshiba recovery disks.

  It took a few hours and here I am logged in as administrator and the TrueSuite software still cannot open the sensor. I don't know what I can do, since it is to return to the factory settings.

  As the above poster said, HELP!

  Thank you.

  ... a little later...

  Well, I managed to do work, and this can be useful for some people out there since I found no easy answers. I can't guarantee anything, and it's really complicated... so here go us.

  First, I downloaded the latest update from Toshiba (util_fingerprint_27460A.exe) and nothing has worked.
  Then I uninstalled the sensor since (click right, uninstalled) Device Manager to uninstall the driver as well (it should invite you to do so)
  Then, still in the Device Manager, I scanned for new hardware and it came with my sensor. I said to look for drivers and when he could not find, I think it gave me an option for windows search for an answer... or something like that. He came back with a link to Authentec (www.authentec.com/win7update/w7wbf32.exe, I think). So I downloaded that and installed. He rose through the device under "Biometric devices" then before... I think it's under the "Personall security device" or something like that. But alas, still no luck. So I uninstalled all the device from the Device Manager (taking care of uninstalling the driver as well) and of the TrueSuite software. Then came the break I was looking for.

  Online research I came across this page... http://members.driverguide.com/driver/detail.php?action=download&driverid=1194755. I had the chance before to DriverGuide.com so I thought what the heck. It is a driver of HP for the same sensor and it is dated 2006. So I downloaded and installed. Still nothing...

  Disgusted, I thought, well let's try to install util_fingerprint_27460A.exe on top of that. So I did, restarted and I couldn't believe my eyes when he said to connect and register fingerprints not seriously. And so I did. I hope this helps people, I don't really know how the sensor I so messed up, but I'm glad it worked.

  Yet one thing... and this may be important. When I took TrueSuite first after doing all this, he told me that the storage of fingerprints was full... or something in that sense. So I clicked the button remove all traces of fingers button and it I would like to register my fingerprints. I'm starting to wonder if that was all I had to do in the first place... Guess I'll never know.

  Good luck.

  Post edited by: rewind22x

• Satellite U300 PSU3DA: error: could not open the file attribute execution of concept maps

  I have a PSU3DA-U300 which I changed from Vista to XP.
  This is because my main computer use will be for navigation (boat) and I was told that most navigation programs will work better with XP. I have almost nothing on my laptop so far, and the system already seems to be slow and freezing too often.

  My question is now on the program of concept maps which I just installed and which does not open. He repeats to me "Eorror: could not open the file attribute.

  What does that mean? I uninstall and reinstall the program, and he comes back with this message.
  I had a glance at the Device Manager, and the only thing that seems incorrect is the PCI memory controller.
  I did a bit of research on this and it seems that this driver is not required for XP? Is this true?

  Would this be a cause of C-Maps program does not?

  Thanks in advance.

  > I did a bit of research on this and it seems that this driver is not required for XP? Is this true?
  Where did you read this info?
  I put t know if the driver is not required, but you get all the drivers on the Toshiba site.

  For your problem with concept maps, I think that it is best to contact you that support the conceptual maps. Here, this is a forum for Toshiba laptops.

• Could not open the file sml nokia

  Could not open the file sml nokia

  Hello

  The operating system that you are running on your computer?

  You must identify a program to open the file. Associate the fily type with a program, and check if it helps.

  Refer to this article for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

• Could not open the page to update windows with the error 80072efe

  Could not open the page to update windows with the error 80072efe

  0x80072EFE - ERROR_INTERNET_CONNECTION_ABORTED - the connection with the server has been terminated.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot send e-mail in Outlook Express. Message "could not open the message from the Outbox folder. 0x800420C8 error number.

  Cannot send e-mail in Outlook Express. Message "could not open the message from the Outbox folder. Account email Sympatico Server SMTPHM.sympatico.ca Protocol SMTP Port 25 secure (SSL) Yes, error number0x800420C8

  original title: 0x800420C8 error NUMBER

  Never seen a port 25, who wanted to use SSL, but by checking, Sympatico's apparently.

  1. This account has already worked? Is it simply to start?
  2. What is the exact verbatim error message? Otherwise, copy & paste it into a response.
  3. Have you tried to send a message and the message stuck in the Outbox?

• Windows Mail & Windows Live Mail does not start, could not open the message store

  Windows Mail & Windows Live Mail will not start. In both cases, I get an error message "Windows Mail could not be started. The application could not open the windows mail message store. Your Windows Mail mailbox data is currently used by another program, such as a virus scanner. Close the program or wait so he could complete its operation, then open Windows Mail again. (0x800C0155, 2). Waiting and turning off antivirus program do not solve the problem. For Windows Mail, I also have the message (Windows Mail could not be started because MSDE.) "DLL cannot be initialized). This message is not displayed for Windows Live.

  Hello

  1. did you of recent changes to the system before the show?

  I suggest you to follow the methods mentioned below and check if it helps.

  Method 1: Troubleshoot Windows Mail

  Follow the link below and troubleshoot Windows Mail and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Method 2:

  (a) open the windows Explorer.

  (b) make a right click on the user C: folder, click Properties.

  (c) uncheck the 'read only' option, and remember that there is no blue rear field in the box.

  (d) apply to all subfolders.

  (e) let run its course.

  Method 3:

   

  EDITING REGISTRY WARNING:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  (a) go to Start, type regedit in the search box.

  (b) expand this registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows Mail.

  (c) right-click and choose export to back it up.

  (d) then make sure that Windows Mail is closed and right click on the key again and choose Remove.

  (e) then try to start Windows mail.

   

  Also, I suggest you to send your application in the Windows Live Solution Center for better support.
  http://windowslivehelp.com/solutions.aspx?ProductID=15

  It will be useful.

• I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I'm probably not explaining my problem fairly - well, I scanned something in - I used Nuance Paperport.  I have it attached to an email and sent to six people - including myself.  I always open the attached file to make sure that the computer has sent the right thing.  When I tried to open the attachment I got the message "cannot open the file - I have already sent you."  I think that Norton Security got rid of the file I need.  I think I will contact them.  I tried to contact Nuance - but alas, my warranty has expired, so no help there unless I want to pay for it.  If I can't have the problem solved through Norton, I will contact you again.  Thank you very much for taking the time to try to help me.  Have a great Thanksgiving action!

  ================================================
  Your explanation was nice... that was my answer that failed.

  I was hoping that you would simply copy the scan of your temporary
  Internet files folder and paste it on your desktop. Then you might
  evaluate what is the problem. I thought that trying to open
  with such a long way email could be a problem. And also... it's possible
  be a file association problem. And it could be a matter of file size.

  I understand that you care why the attachment to the email
  failure and I think you need to find what is the problem with the scan
  before fastening will be successful.

• Windows Live Mail could not be started. The application could not open the Windows Live Mail message store error code: 0x800C0155

  Origianl title: windows live does not open

  My Windows Live Mail has recently stopped working, by double-clicking on the desktop icon top of page does not open the program, appears it the "Windows Live Mail" logo and then a message saying:-"Windows Live Mail could not be started. The application could not open the Windows Live Mail message store. Your Windows Live Mail mailbox is currently being used by another program, such as a virus scanner. close the program or wait so he could complete its operation, then open Windows Live Mail again. (0x800C0155).

  I tried to reinstall WLM, restore my computer, remove anti virus protection. Nothing works

  Help, please!

  Hi B Clinton,

  For a more specialized on issue of Windows Live Mail help, send your query on the Windows Live Forum.

  Windows Live Forum -http://windowslivehelp.com/

• Could not open the photos sent to my Hot mail account?

  Could not open the photos sent to my Hot mail account?

  Hi Dean,

   

  Hi Dean,

  1. what happens when you try to open the attachments?

  2 are you facing this problem with any particular email?

  3 are you facing this problem all other sites?

  4. what anti-virus software is installed on your computer?

  I suggest you to follow the steps and check if it helps.

  Method 1: Check if the security level is set to medium in Internet Explorer 9.

  Change Internet Explorer security settings

  Method 2: Optimize your internet Explorer and check to see if it helps.

  How to optimize Internet Explorer

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Note: This link applies to Internet Explorer 9.

  If you encounter this problem only with Windows Live Hotmail, please visit the link below to find a community that will provide the best support.

  http://windowslivehelp.com/product.aspx?ProductID=1

• Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.

  Loading of the Internet

  Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.  The site requested is either not available or cannot be found.  "Please try again later ' this happens for all sites, I try to download from... Please help.

  Hello

  To work around this problem, follow these steps:

  1. start Internet Explorer.
  2. on the view menu, click Internet Options.
  3. on the Advanced tab, clear the do not save encrypted pages on the
  disk check box.
  4. go to the page where you received the error.
  5. right click on the file link, click on save target under, select one
  destination and then click Save.
  Good luck!