D8 forget FTP login between sessions

Similar Questions

• Dreamweaver don't forget Remote Login and password information

  Hello
  
  For some reason, these days, Dreamweaver 8 has begun to forget the Login of Info remote (FTP) Login and password!
  
  He remembers all the rest, but when I close Dreamweaver and start it up again the Login and the password are empty again. All other sites are fine - just new that I've created.
  
  Any suggestions?
  
  Simon

  Take a look on:
  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=3491671c

  Gareth
  http://www.phploginsuite.co.UK/
  PHP Login Suite V2 - 34 server behaviors to build a complete system of connection.

• User persistent between sessions variables

  I have read in a long thread and instructive to 4 and a half years ago that even if "resume data" or "data to suspend" was sent to the LMS between sessions (to keep my Captivate user variables), if my user variables are either set to an initial value in my Captivate file, they will be reset every time at the entrance to the initial value , and the persisted value will be lost.  My question: is this still true in Captivate 9?

  I ask because if a student leaves a lesson and returned it later, a problem that might be explained by the phenomenon above, we discovered a problem with the behavior of our modules.

  It is best if you use a js file included to do so. You can create the file and put the include in the index.html file

  The "moduleReadyEvent" fires only once, to create an initVariables function to get the localStorage form of vars or initialize the localStaorage if it does not yet exist.

  In the initializeEventListeners function, add you a "CPAPI_SLIDEENTER" listener, set the storage whenever you enter a slide.

  Add a window.onunload function to set it again when the page is unloaded.

  window.addEventListener ("moduleReadyEvent", function (e)

  {

  interfaceObj = e.Data;

  eventEmitterObj = interfaceObj.getEventEmitter ();

  initVariables();

  initializeEventListeners();

  });

  function initVariables()

  {

  implement the localStorage

  }

  function initializeEventListeners()
  {
  If (interfaceObj)
  {
  If (eventEmitterObj)
  {
  eventEmitterObj.addEventListener ("CPAPI_SLIDEENTER", function (e)
  {
  call a function to set the storage here.
  });
  }
  }
  }

  Window.OnUnload = function()
  {
  call a function to set the storage here.
  }

• Peacekeeping contexts ODCI sweep between sessions

  Hello
  
  I have a problem when implementing the interface for function ODCI pipeline in Java using 11.1.0.7. I have copy and paste the example code [url http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28425/pipelined_example.htm#CHDHDHEE] from the documents, only adding an ODCITablePrepare function to take advantage of the knowledge of the columns that are covered by the request. Everything works fine the first time I run my function as you can see from the trace

  SQL>exec insert_ab10_cat;
  Entering ODCITablePrepare
  setContext key=0
  create hashtable
  setContext new key=1
  Created context with key = 0
  Marking fields accessed by query: 3 - 13 - 14 - 15 ...
  Leaving ODCITablePrepare with context = DWH.PARSEFILECAT
  
  Entering ODCITableStart with context = DWH.PARSEFILECAT
  Retrieving context with key = 0
  getContext key=0 count=1
  Calling list_files() with sysName = AB10, fileType = CAT
  Leaving ODCITableStart
  
  Entering ODCITableFetch with nrows = 1
  Retrieving context with key = 0
  getContext key=0 count=1
  Opening file /mnt/cluster/xxxxxxxxx
  Leaving ODCITableFetch with nrows = 276
  
  Entering ODCITableFetch with nrows = 32766
  Retrieving context with key = 0
  getContext key=0 count=1
  Leaving ODCITableFetch with nrows = 0
  
  Entering ODCITableClose
  Retrieving context with key = 0
  getContext key=0 count=1
  Leaving ODCITableClose
  
  PL/SQL procedure successfully completed.

  Also, things are ok, if I run the function again in the same session, given that I have does not clear the previous context. This time Oracle does not call ODCITablePrepare because the SQL query is stored in the shared area:

  SQL>exec insert_ab10_cat;
  Entering ODCITableStart with context = DWH.PARSEFILECAT
  Retrieving context with key = 0
  getContext key=0 count=1
  Calling list_files() with sysName = AB10, fileType = CAT
  Leaving ODCITableStart
  
  Entering ODCITableFetch with nrows = 1
  Retrieving context with key = 0
  getContext key=0 count=1
  Opening file /mnt/cluster/......
  Leaving ODCITableFetch with nrows = 250
  
  Entering ODCITableFetch with nrows = 32766
  Retrieving context with key = 0
  getContext key=0 count=1
  Leaving ODCITableFetch with nrows = 0
  
  Entering ODCITableClose
  Retrieving context with key = 0
  getContext key=0 count=1
  Leaving ODCITableClose
  
  PL/SQL procedure successfully completed.

  But things go wrong if I connect and once again, or if I try a new session:

  SQL>exec insert_ab10_cat;
  Entering ODCITableStart with context = DWH.PARSEFILECAT
  Retrieving context with key = 0
  getContext key=0 count=0
  Exception in thread "Root Thread" java.lang.NullPointerException
          at oracle.CartridgeServices.ContextManager.getContext(ContextManager.java:48)
          at myClass.ODCIstart(ParseFile.java:144)
          at myClass.ODCITableStart(ParseFileCAT.java:97)
  BEGIN insert_ab10_cat; END;
  
  *
  ERROR at line 1:
  ORA-29532: Java call terminated by uncaught Java exception: java.lang.NullPointerException

  Note that the accident occurred inside the ContextManager Oracle class... Hmm... Of course, everything go back to normal if I drain the shared pool. The behavior (except of course for the part of crash) is somewhat understandable, given that different sessions are not supposed to share memory, so the context that was originally created by ODCITablePrepare is not available to the other sessions, even if the index of the object that is stored by the ContextManager CartigeServices is an attribute of the object type (in this case DWH.) PARSEFILECAT) and is shared by all sessions.
  
  So what is the solution to this situation? I have the feeling that the right way to do would be to define and store all the objects that should be passed between sessions as attributes of the object type, instead of a pointer to integer unique to a ContextManager entry; However, the Java object representing the context is quite complex and I have no idea how to represent in PL/SQL, this coding by hand would be very difficult and prone to error, still less a maintenance nightmare. Does anyone know of a better way to do it?
  
  Thanks for your help,
  Chris

  Hi Chris:
  There is an inconsistency here between the docs and reality :(
  Note This article (http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10765/pipe_paral_tbl.htm#ADDCI4712):
  >
  Prepare, method

  ODCITablePrepare() is called during query compilation. It generates and saves the information to reduce the runtime of the query.

  If you do implement a ODCITablePrepare(), ODCITableStart() initializes the context whenever it is called. However, if you do not implement ODCITablePrepare(), it initializes the context of analysis, which is passed to the ODCITableStart () when the query is run, by reducing the startup time. In addition, when ODCITablePrepare() is implemented, ODCITableClose() is called only once during the query, rather than every time the table service is restarted. This offers the following advantages:

  It reduces the execution time by reducing the number of calls to ODCITableClose().

  It allows the context of scanning between the table function restarts.

  ODCITablePrepare() also provides information of projection to the table function. If you do not ODCITablePrepare() implement for the table of functions that return collections of types defined by the user (UDT), your table function must define all the attributes of the UDT of each element, because there is no way to know which attributes are used. On the other hand, selection in an ordinary table retrieves only the required columns, which is naturally faster in most cases. However, if you do not implement ODCITablePrepare(), it can build a table of positions of the attribute, record the return type information in an argument of type ODCITabFuncInfo and save this information in the analysis, as described in example 13-14. >
  But I'm sure that if you close a connection to the DB, the OJVM fade and all information stored in a hash table will disappear (remember that ContextManager.setContext (ctx); in-house is implemented by a hash table).
  My recommendation is:
  -Try to implement most of part of the pipeline in PLSQL, switch to Java implies a change in SQL in the Java context space. For example, you can implement Prepare and describe the method in PLSQL and only implemt start/extraction/close in Java.
  -If you can not retrieve information from struct in another parallel to the Java session, try to use a temporary with instance field table and stores rated context, you can use the args as the key value, this value is passed into all the functions describe, prepare, start, is therefore a good candidate to work as a key and the temporary table will work as a shared memory area stored in the LMS.
  Best regards, Marcelo.

• Active FTP problem between Checkpoint and Cisco PIX

  Hello

  I am facing a strange problem.

  Many of our customers have achieved a Checkpoint FW-1/VPN-1 4.1 SP6 (the last before NG). When they try to connect to an FTP server that is located behind a Cisco PIX firewall, they are not able to transfer data: the connection is established, the authentication to follow, but at the stage of the 'LIST' the connection 'freeze' and the user must close the FTP client.

  Users are facing this problem ONLY in Active mode: passive mode works very well. Turn passive mode FTP client isn't acceptable workaround for most of my clients.

  The problem seems to be related only to the firewall Cisco PIX and active FTP.

  Please, what is someone encountered the same problem?

  Could someone give me any help?

  Thank you in advance.

  Paolo

  Yes it is a (global) problem, even with the last checkpoint firewalls. What happens with Active FTP, it's that each command (get, list, etc.) causes another log on the client (source port) to the server on port 21. If you run netstat from the customer you can check this for yourself.

  What normally happens, with HTTP, FTP, telnet, which have are, it's that the client makes a connection to port 21, 23 etc then returns with a port source such as 1936, 1980, 3000, etc..

  Connect problem with statefull firewall is they do not allow multiple sessions control port number on a destination, as well as a source port can be bound to a destination port, in this case, 21 for FTP. I Don t see it changed, an extreme security risk any time soon, since it s, someone else might be hopping session and block this type of traffic, it's what the stateful firewall are all about and FTP servers are problably the machines more pirated on the planet.

  You´ve mentioned the workaround solution, unfortunately that s the only way, change your passive customers, I think that Unix/Linux customers have a problem with this, change your FTP server can also help, there are multiple servers that can be configured to disable Active FTP, I wouldn know exactly, I only network & firewall... maybe someone else can move on this...

• FTP login stopped working on Dreamweaver

  I connect via FTP to my server two different Mac computers, a Dreamweaver CS3 running and the other - CS5.

  One day the computer running CS3 stopped connection using the credentials. Same credentials work very well to the other computer.

  An expert from Adobe told me in the trash a bunch of preferences files and "pure software", but after I reinstalled it and restarted, Dreamweaver still not forget my serial number and the address of the FTP server to which it still does not connect. So it wasn't really a 'clean' reinstallation, was it?

  Does anyone know how to make a true 'clean install' or maybe just trash the file that contains the serial number and the connection (probably corrupt) information?

  Thanks for your help.

  Vlad

  Use a 3rd party client like Filezilla FTP, while you are working on the problem.

  FileZilla - the free FTP solution
  

  Thing to consider.  It is possible that your Mac user account is corrupted.  Try to create a new full super user with read/write permissions.

  Nancy O.

• How to keep an eye between sessions

  Firefox used to close the browser without close tabs. About an hour ago, it prompted me to leave 'Refresh' to 'speed up' my session (I had not noticed any problems). Stupidly I leave 'Refresh', now when I try to close the browser session, he insists on closing all my tabs. How can I stop this?

  Refreshing restores your browser settings to their default values. The default value for this setting is to show your home page when you start Firefox. To make Firefox show your windows and tabs from last time when it starts, follow these instructions.

• 28.0 Firefox does not save my tabs open between sessions - Mac OS x on MacBook Pro

  (I was intending to respond to another thread on this topic but Mozilla Support requires you to start a new thread to be able to register)

  Firefox starts: show my windows and tabs from last time.

  No setting change - either in the preferences or all: config - changes the behavior of Firefox to restore the tabs at previous sessions.

  Options I've seen suggested:

  • Create a new profile to test
  • To uninstall and reinstall Firefox
  • Delete the files in your profile sessionstore (?) folder

  Yes.

  I have reset default Firefox and which seems to have authorized.

• How to save tabs between sessions with Panorama.Or inTabs is it not possible?

  Panorama is good BUT have yet to find a way to SAVE groups of tabs of sesion sesion. IE, if I have two groups named tony and other tools. If I close Firefox and then start a NEW session ther doesn't seem to be a way to reopen them. Or am I be thick?
  Tony

  (PIN) App tabs and groups of tabs (Panorama) are stored in session data [1] in the sessionstore.js file [2] in the Firefox profile folder [3].

  Make sure that you do not use "Clear recent history" to clear the 'browsing history' when Firefox is closed because who wins and prevent Firefox tabs from the previous session.

  • https://support.Mozilla.com/kb/clear+recent+history
  • [1] http://kb.mozillazine.org/Session_Restore
  • [2] http://kb.mozillazine.org/sessionstore.js
  • [3] http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox

  It is also possible to use the "Show my windows and tabs from last time" parameter, which is generally a more reliable way to restore the session data.

  • Firefox/tools > Options > General > startup: "When Firefox starts": "show my windows and tabs from last time '.

  If you like CCleaner cleaning software, then make sure that the Session is disabled in the parameters of the Firefox application.

• Passing parameters between sessions in openscript.

  Hello
  
  I currently have 4 scripts (test1, test2, test3 test4 - all are web database load scripts). I have 5 script (criterion 5) calling Run method of all 4 test scripts in the test1 sequence
  test2
  test3
  test4
  using the active script feature. In the stream, 1 test result should be gone to the 2 test, then test 2 uses data from test 1 and test result 2 should go to 3 and finally test 3 to test 4. Is there anyway to control the flow of data between scripts. (Basically, I want to know if test 5 the main script, anyway to control the flow of parameters among other scripts.) Any help would be really appreciated.
  
  Thank you
  John

  Hi John,.

  You define a variable with global scope in test5. If this variable will be available in all internal scripts. So update the value of the variable by the internal script will help you to transmit data between scripts.

  Thank you and best regards,
  Rajesh

• PGA of DIVISION between sessions

  Hello
  I am forest inside the management of oracle (mainly PGA) memory get better understood on the PGA TOUR.
  With the help of:
  http://docs.Oracle.com/CD/E11882_01/server.112/e16508/memory.htm#i12483
  
  My question is how oracle divides the memory for the process (PGA)?
  Each process has get a fixed size of the PGA?
  Or the PGA divided equally between the process?
  For example if I have a PGA G 10 and that a user to connect to the DB.
  Can get up to 10G of the PGA to his operation, sql (like)?

  Hello

  Link below may be useful for you.

  http://www.DBA-Oracle.com/art_so_undocumented_pga_parameters.htm

  Kind regards
  Amit Golia

• Definitions info keep forget FTP site

  I use Dreamweaver CS 5.5-11.5 build 5366 on a Mac - 10.8.4. I have a few dozen sites in my Site Manager. Frequently these days, I have when I go to connect to my server, I get an error. It seems the definition of site has forgotten the FTP username and password, all other parameters are still there.

  I exported all the definitions of my site in the past, ensuring return to top my settings. So I can remove the broken site definition and immediately import it again. This works for some connections, or a restart Dreamweaver, and then the user name and password are forgotten again.

  I guess the preference of definiton of site got corrupted. I found this preference:

  Users > Macbook > library > Application Support > Adobe > common > 11.5 > Sites > Site prefs.

  Except, delete this file does not clear my list of Sites in the files window show Drop Down. Where else could live the definitions?

  I also deleted the

  Users > Macbook > library > Application Support > Adobe > Dreamweaver CS5.5 folder

  and

  Users > Macbook > Library > Preferences > Adobe Dreamweaver CS5.5 Pref.

  and

  Users > Macbook > Library > Preferences > com.adobe.dreamweaver - 11.5.plist

  Any other suggestions to solve this?

  brand

  This solves the problem.

  http://forums.Adobe.com/thread/645458

• Thunderbird is forget send password between messages.

  Since last week, whenever I try to send a message of second or third it does not recognize my password even though I provided the first time. Sometimes I have to enter the password several times until he finally acknowledges. I can't tell if it's a question of Thunderbird or if the problem is with Yahoo, so I start with you.

  thanx

  First tell Thunderbird to forget the saved password, then when it asks for the password next time, make sure the password is saved in the password manager.

  Details:

  Thunderbird menu: tools: Options: Security: Passwords tab click the "saved Passwords" button (see first screenshot below) and then in the new window, click on the button 'delete all '. Click on 'Close' in this window, then 'OK' in the Options window.

  When Thunderbird request you your password next time, make sure that you tick "use Password Manager to remember this password." See my second shot below.

• FTP login incorrect password/login Fail

  Hello
  I'm having problems connecting to my remote site today, the only thing that has changed is my FTP password for security reasons that he has now changed a 17 char password but now I can't connect with DW 8.0.2 If cmd then jeutiliser or another program FTP, I have no problem at all is there a limit on the length of password in DW?

  Thanks to Murray * ACE *, we found the problem, the password contained a sign ' £' and who disliked DW.

  Thanks again Murray

  Concerning
  Allan

• Favourite Add - ons disappear between sessions

  When I start my computer lately, about three of my favorite FF (ver. 33.1.1) modules are installed is no longer. It's Lazarus, X-notify and theme and size Changer.I fonts can reinstall them manually, but it becomes a pain to do. I find that when I reinstall the Add-ons seem to remember my previous settings, such as X-notify, who always has my Hotmail and password accounts when I reinstall. Please advise, thank you!

  After reading this article and all the comments, it ends with a message by Lukas (avast!, I guess) says:

  "Browser cleaning team is currently working on a fix, which will be delivered via a VPS update soon (tomorrow)."

  So, it looks very promising!