Similar Questions

• How can I force send a update saved daily report to the Group?

  We had a problem with some re3ports today and I need to return a couple of the daily reports that are automated.  How can I force send two reports after they have already been auto sent earlier (if necessary).  I'm in E9

  I had this problem before:

  Locate the saved report.

  I will usually through: assess->-> report Admin report

  If it is part of an update by e-mail, I pull up the specific agent and then return the update by e-mail by clicking on options and selecting "send the Email of Test."

  If it is not part of an update by e-mail, I isolate the report saved as reports and export data by accessing the saved report and then click Preview report saved.

  There might be an easier way to do it, but it always irritates me data in a pinch: D

  I hope this helps.

• InDesign crashes when opening a specific .indd file

  Hello

  This morning, I added some finishing touches to a little book. Then I split the file into the cover and the inside of the book. Suddenly, InDesign crashed and maintains the plant after that I open the file with the content inside. Also, it crashes in InCopy. I tried several suggested solutions on the internet as the deletion of fonts the user, start in safe mode, but none of them worked.

  I pasted the file of report here:
  Process: Adobe InDesign CC 2014 [1451] path: / AP - Pastebin.com

  Thank you

  The script here can help: community Adobe: InDesign 6 crashes when you try to open a specific document. All others are open OK.

• I need to have a Windows to FF shortcut that opens a specific site

  Is it possible to put in place a shortcut in Windows that run Firefox and open a specific Web page, bypassing the home page existing in FF?

  You will need to add a command line for the shortcut option when launching Firefox.

  Firefox.exe - url www.mozilla.com

  See command line options

• Since the launch of Teststand I want to open a specific movie file

  Hello

  When I run Testand his way by default, it starts with the default behavior: opens "Movie file 1" (see attached .jpg)

  I want to change this behavior. I want to open a specific movie file.

  The pointers will be appreciated.

  Thank you.

  Hello chimbombo,.

  A simple way to do this is to create a single batch file that launches TestStand with 'sequencefile' argument, as described in this help document:

  TestStand Help: Configuration sequence editor and the Boot Options for the User Interface

  http://zone.NI.com/reference/en-XX/help/370052K-01/tsfundamentals/infotopics/startup_opt/

  That should cause the sequence editor open and load one or more files in sequence you specify.

  Hope that helps!

• I can no longer send e-mail messages to my contacts who have accounts with sympatico, why what is happening?

  I can no longer send e-mail messages to all of my contacts who have accounts with sympatico, why is this?

  They just come back don't non-delivery, no error message?  Allother emails are very well...

  Hello

  I suggest you to check with the owner of the email account, if they receive e-mail messages from other senders that have the same domain as your.

• I get it during the installation of the first elements 13 ' the product you want to install is not a genuine Adobe software and appears to be counterfeit. Please report or contact customer support for assistance'

  I get this message when installing an upgrade of the first elements 13 ' the product you want to install is not a genuine Adobe software and appears to be counterfeit. Please report or contact customer support for assistance'

  Warning: "Adobe software real failure of Validation...". » | Windows

• PowerCLI daily report script automation

  Hope everything goes well, I just started using PowerCLI to automate some admin tasks in our virtual environment, I have a .ps1 alan daily report script renouf, I'm sure you've seen or used, but I'm trying to make it automatic and no matter what I do, I always get prompt to connect to the server you know a smart way to use a file batch or something that will run the script without user intervention?  Basically, I want to create a dashboard admin with the ability to click on an executable file or batch file and have it initialize the analysis without having to provide credentials...  Any input would be greatly appreciated.

  Chris

  Chris

  Yes you can do it.

  Create a command batch script.

  Call;

  %Path%\powershell.exe - PSConsoleFIle "Path of Vim.psc1" (usually the files\VMware\Infrastructure\vSphere program PowerCLI) "&"Path to Script.ps1"vCenterServerName.Domain.Name".

  I hope this helps

  Nathan

• Create a link that opens a specific folder

  I wonder how to create a link that opens a specific folder on your computer? I can only find "Open a file" and "Open a web link". I use Adobe Acrobat X Pro.

  You can not.

• Open a specific browser, i.e. Firefox

  I don't know if it's possible, but I would like to be able to open a specific browser and then access a URL. What I mean is if the user has a Flash site open in Internet Explorer, I need for them to click on a button and this will open the link in Firefox. Is this possible?

  Background...

  Our company uses Internet Explorer 6 as your primary browser on all employees of the PC and for technical reasons, what IE cannot be updated. The problem is that the Web App site that I want to open must be opened in a modern browser, the application does not work on an old browser such as this. Firefox is installed on every PC, for this reason, but I cannot be sure that the user opened my site in Firefox so I need to check that they use Firefox, otherwise it must be opened first. Any ideas around this issue would be most appreciated.

  Thanks for your help. That's what I did incase ultimately this issue arises again.

  {if(Flash.System.Capabilities.playerType=="plugin")}

  trace ("using FireFox");

  }

  else {if(flash.system.Capabilities.playerType=="ActiveX")

  trace ("Internet Explorer");

  }

  else {}

  trace ("No. Browser");

• Director opened with specific panel game

  Hello

  It is possible to set the default configuration of the Director?

  In other words, it's possible Director opened with specific Board play?

  If yes how?

  Thank you.

  1. first, download the presentation you want.

  2. go in
  Edit > Preferences > General...

  3. click on the Savecheck box - window Positions when leaving.

  4. master output.

  5. open Director and going back in General Preferences and uncheck the property register the Position of Windows .

  Now when you close the Director, it won't save the positions and will be used to the last saved configuration.

  Dean

• Launch Dreamweaver CS4 and open a specific site

  One of my stumbling blocks from GoLive to Dreamweaver CS4 9 is to find a way to open a specific site at launch of Dreamweaver.  GoLive has a "name.site" file that contains site specific information.  Double click that GoLive site file launches GoLive (or switches to the currently running application) and in fact the current/first site plan of the site.

  With Dreamweaver, I can click twice on a page of a site and launch Dreamweaver.  However, the active site of Dreamweaver is one that has been active at the end of the last session of Dreamweaver.

  Is there a way to launch Dreamweaver to automatically open a specific site?

  -Barney

  Is there a way to launch Dreamweaver to automatically open a specific site?

  N ° if you think it's important for your workflow, request a feature through the official form.

• Smartphones blackBerry "BOLD": cannot open attachments to emails or send emails

  I have the "BOLD" and it works very well for a month. Then, I got my Peral (an old that I dropped in the snow) to finally turn it back on and used the Fund Manager to transfer my contacts and settings of my "BOLD". Once I did that I can no longer use my "BOLD" to send emails or open attachments to emails. I get e-mails very well however. When I try to open the attachments I get the message "cannot perform more demand. Service book information not found ".

  First of all, what is the book of service? because I saw another post saying try to reset but I don't know how I could go about this.

  Secondly, any ideas on what I could do to make it work again? Is there a system restore? Or restore default settings to get rid of the changes I made when you use Desktop Manager to update my settings?

  Thanks for any help!

  Hello

  On the Blackberry will first of all for advanced options options-host routing tables-press menu key and select Register now.

  You will receive an activation message. You are now properly registered with the network.

  The next thing is to send service directories. A service book contains information that configures the interaction between smartphone BlackBerry with the BlackBerry Infrastructure. It also allows specific services for your BlackBerry device.

  In the Blackberry, use the email Setup icon and log in with your username and password and send service directories.

  The attached link has pictures to show you how. You will receive an activation e-mail for each account that you have configured on your device.

  You should now be able to send and receive emails and open attachments. Test it to make sure it works.

  If you find that you can send and receive but not to open attachments, the second link will show you how to reset

  your Blackberry attachment service.

  Thank you

  Bifocals

  Don't forget to adjust your thread.

  Put the check mark in the green box containing your answer! Thank you

  Service books

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB15402&sliceId=SAL_Pub...

  Spare part if necessary difficulty:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB04279&sliceId=SAL_Pub...

• Suddenly, I can't open links in emails!

  OK, so without changing ALL the settings I can not suddenly open links in emails sent to me, nor do I insert hyperlinks in emails, I'm composing.  I get an error message stating that "this operation has been cancelled (sic) due to restrictions in effect on this computer.  Please contact your system administrator.  I am the system administrator, and it is my laptop with no other users.  I looked in all the parameters that I can find but can't find anything that has the result needed to pull me back to the possibility of using links in the email.  Help!

  You don't mention the e-mail program, you are using, but looking into my CrystalBall © I see...
   
  You receive an error message when you click a hyperlink in Outlook
  http://support.Microsoft.com/kb/310049
   
  Microsoft Office Outlook Forums can be found here
  http://answers.Microsoft.com/en-us/Office/Forum/Outlook?tab=all     

• How can I reset my laptop to Nov.2010 - I have problems opening and send emails after January 2011

  I had problems opening and sending emails after January 2011 so I wanted to turn my back on Nov.2010

  Hello

  You cannot use the system back restore more than you have Restore Points. The only one
  Another option would be to return the system to its out of the box, as it was when
  you received. So, it would be better reset your e-mail settings and check with
  the support of your email provider.

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ============================================================

  These can help with system related issues:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =============================================================

  This is Hotmail:

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  -------------------------

  And Windows Mail

  Windows Live Mail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=15

  Windows Live Solution Center - Solutions mail - Mail Forums
  http://windowslivehelp.com/

  Windows Live Mail - mail Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=15

  I hope this helps.