Similar Questions

• Syntax error? : = SUMIF(C2:C94,"=10",H2:H94)

  I changed this equation in several different ways and may not have to work. I started by copying directly from a spreadsheet where he worked. Now that I have it on the worksheet on that I need I get syntax errors. I deleted and retyped thinking it was a problem of copy / paste, nothing works. I don't know what I'm doing wrong. This formula has always worked for me. Help, please.

  Hi katxoxo,

  In short, it seems ok to me.

  You could try to do is recreate the formula by clicking and pointing and build these terms by in the Inspector of the formula.

  Quinn

• Numbers gives an error of syntax for all equations

  I don't know what is happening, but I keep getting errors in syntax for multiple equations and no matter where I put it or how, he always gives the syntax error. Example B2 has 500 in there. Enter B3 B2x2 and it gives an error of syntax instead of 1000.  I leave numbers and re-open the file with the same results. I even opened a new worksheet, and when you enter anything except the Scriptures, I always get the syntax error. It seems that there is something wrong with the numbers himself. Can someone explain why I can't use the formulas at all. They used to work in the past, so I am confused, what can happen.

  Salvation of,

  Did you B2x2 = or = B2 * 2?

  Number change * to x, but seems not to recognize x as the multiplication operator when he entered directly.

  Kind regards

  Barry

• Why my emails sent to customers yahoo and mindspring rejected for syntax errors?

  Here is the error message:

  Delivery to the following recipient failed permanently:

      Lisa@[email protected]
  

  Technical details of permanent failure:
  Google has tried to convey your message, but it was rejected by the server for domain yahoo.com by mta7.am0.yahoodns.netrecipient. [98.138.112.37].

  The error that the other server returned was:
  501 Syntax error in parameters or arguments

  Having two ' @' characters seems quite problematic.

  What version of Thunderbird do you use? I read a different view today where there was apparently stray characters being added to the email address.

  Can you identify which parts of the address are correct, and the bits seem to have been added?

• Using Firefox under Ubuntu, I often get a Javascript error message that says error evalinSandbox: SyntaxError:syntax. How can I fix?

  It happens on most, but not all, pages I visit. After you close the error message, another pops up saying "error: syntax error." Close this window to display the initial error again and the process repeats five or six times. Finally, windows will stop popping up and I'll be able to visit the Web site, but whenever I go to a different Web page error messages again. I've updated Firefox and Ubuntu for the latest versions.

  Hello, this error message is typically caused by the social Fixer addon & can be resolved by updating to the latest version available at http://socialfixer.com/blog/category/releasenotes/

• Since the patch v17, I get syntax errors on each site, that I will. 2 windows each time. OK twice and they are gone.

  It's the 1st small window that displays ' evalInSandbox:SyntaxError: syntax error ".
  I click 'OK', then the following window appears "syntax error". I click 'ok' and it disappears until I go to another web page.

  I had the same exact errors to appear on all Web sites. I tested each extension and add on to my firefox and found that it was the application of SocialFixer (version 7.2) that was the problem. If you have installed, try to update to version 7.3 of SF. It fixed my problem, maybe he'll deal with yours!

• Notification of 'Syntax error' constant JavaScript after the upgrade to 17.0

  Almost on every page, I opened appears after notification ' error: error of syntax "JavaScript application. Even on this page where I fill in the form.
  I have to click 'OK' several times to clear.

  Same problem with the last update. In Safe Mode deleted SocialFixer. Which corrects the problem.

• Syntax of HP to convert error

  Hello

  I have a new HP first graphic calculator.  My old G 48 died on me, and decided to make the switch.  It's so different from what I am accustomed.

  First of all, this is my first HP Info:

  Software version: 2014 3 31 (6030)

  Hardware Version: has

  Version number: 1.1.0 - 46

  A function that I use a lot on my 48G was converting units.

  So I tried starting using Convert on my first HP and when I tried to convert I had a syntax error.  Looked around in forums and somewhere, he updated firmware, I did.

  Now I have 2 errors.  First of all, when I press "Convert", I get a new error: wrong number of arguments

  Then when I try to convert I get the same error of syntax.

  I think I know where the problem lies for the syntax error, when converting should put units (of) I think.  But for some reason any length that is not, for other units, he made (km2).

  I tried the feature on the virtual calculator on windows and on the virtual server an everything works, but on my physical, I always get the same 2 errors (even when the units are in (), with no result.

  Can anyone help please?

  Thank you

  Please let us know some examples of expressions that you tried, what you expected, and what has happened to the place.  ALSO please let us know how your premium is in (for example entry RPN, or CASE mode), because the first behaves very differently according to the home and CASE parameters.  The app is the active application (displayed in the title bar) can alter the behavior of premium.  When you know these things, we will be able to discern why you get syntax errors.

  If I had to bet, I'd bet a nickel that the problem is due to your first RPN mode.  If so, you must use RPN, not algebraic syntax.  Example: 5_ft, Enter, 1_in, Enter, CONVERT-> 60_in (as well as on your HP 48).  Earn a penny?

  DISCLAIMER: I do not work for HP. I'm a happy user of HP Calculator.

• Calculator HP 35s - wind power program "syntax error".

  I have concluded the following equation to wind mode ALG one program on my 35 s HP and get "Syntax Error" when RUNNING.

  Wind chill (° F) = 35.74 + 0.6215 T - 35.75(V^0.16) + 0.4275 T(V^0.16)

  The equation can be referenced at http://www.srh.noaa.gov/ssd/html/windchil.htm

  Here's my schedule:

  W001 LBL W

  W002 T OF ENTRY

  ENTRY W003 V

  W004 35.74 + 0.6215 T - 35.75(V^0.16) + 0.4275 T(V^0.16) ►W

  W005 RTN

  I'm a newbie when it comes to programming on the 35 HP s, but I entered the same equation in a TI-83 and a Casio fx - 4200P and it works very well on these calculators without error.

  I use a similar program on my 35 HP s for the calculation of dew point, and it works very well without any problems either. I've listed below for reference:

  D001 LBL D

  D002 F ENTRY

  D003 OF ENTRY R

  D004 (F - 32) x5÷ 9► C

  ► 1-(0.01xR) D005 X

  D006 C-(14.55 + 0.114xC) xX xX-((2.5+0.007xC)) ^ 3-(15.9+0.117xC) xX ^ 14► D

  D007 Dx1.8 + D 32►

  D008 RTN

  Any help on this will be greatly appreciated!

  Thank you.

  Hello

  You have to put a sign of multiplication between the 0.6215 and T, & 0.4275 and T for the W004 line looks like this:

  W004 35.74 + 0.6215xT - 35.75(V^0.16) + 0.4275xT (V ^ 0.16) ►W

  Concerning

  BartdB

• First HP Calculator: syntax error in line 23, first HP program

  Hello all, can not find this error, because I don't see anything wrong, maybe I count the lines wrong, then how count you lines in HP PPL. It's in the manual? Program to check say syntax error in line 23 program.

  Hi!, @surveying101bil:

  How are you?.

  To detect the line, HPPL, you needed to County, head, program... EXPORT ('title'), line 23.

  If you need assistance, the program, copy all lines, program, in the Forum.

• Downgrade from Windows 7 to XP. "Syntax error in the .sif file.

  Every afternoon.

  I wasn't totally sure what forum to put this in.

  My boss bought a new laptop of A11 - 11: my my line manager and asked that he be demoted to XP and put it on our network. (usually, it didn't network.)

  It's Windows 7, so I know that's not easy to downgrade.

  I changed the SATA setting in bios compatibility (IDE) and that allowed me to start running the installation CD.

  Then, I got this error;

  "There is a syntax error in the." SIF file used by Setup Online: 8971.

  Setup cannot continue. Stop or restart your computer. »

  I have this with 3 different original discs

  Looking around without decommissioning is to get rid of all the recovery partitions. So, I have that one hidden and now I have a large main drive to NTFS.

  I still get the same error. No recovery disk. Original discs and now I'm totally stumped.

  Are there any other settings in the Bios maybe I need to change?

  Anyone has an idea what I might try?

  See you soon
  Stu

  You should try to install Windows XP Home (SP2 or SP3) using SATA driver to start loading. In this case do not use the compatibility mode but AHCI mode.

  Without load the driver (F6 option at startup to install of WXP) SATA disk HARD will be not visible to Windows XP Home edition.
  Option of job search on this forum and you will find so many threads on the installation of Windows XP Home on the latest portable Win7 supported.

• About applescript syntax error

  Code:
  

  my itermExec1()

  on itermExec1()

  say application iTerm2

  Set newWindow to (create the window with the default 'yeongjun' value)

  end say

  end itermExec1

  It is this script run the ' iterm 2'. (reference. ( https://iterm2.com/applescript.html)

  Why is syntax error? Please

  Thank you

  

  I can't read the error, but you left on the keyword 'profile '.

• Syntax error line 43 of swupd.conf

  I get error messages repeated in the swupdate errorlog:

  Syntax error on line 243 library/software/Server Update/Config/swupd.conf:

  Invalid address or port

  Here's the line 243 of this file:

  To listen *: 0

  Everyone see what is the problem? This error seems not until I have reset the swupdate service by removing catalogs and downloads and restart the service.

  Thank you!

  Dean

  To listen *: 8088

• Syntax error when you use FindIndex in TestStand functions

  Hi all

  I used this function well before that was functional for me, but don't know what I'm doing poorly able to do my work.

  This is my scenario,

  I have a local variable of the table 1 d of chain bear (Locals.XXX)

  I need to get the first value of the element

  I used the below syntax

  FindIndex(Locals.XXX,1,True)

  

  Advice me what I am doing wrong

  Thanks Charlie

  I will use another method to the same requirement

  Locals.MyArray [4] instead of find indexes

  Bravo for your support!

• Component-level IP: generate and check the syntax error

  I tried to create a component for my device myRio level IP. I encountered this problem:

  File level information extraction superior synthesis. Please wait...
  
  Processing files...
  
  Vivado Simulator 2014.4
  
  Copyright 1986-1999, 2001-2014 Xilinx, Inc. All rights reserved.
  
  Running: C:/NIFPGA/programs/Vivado2014_4/patches/AR62969/vivado/bin/unwrapped/win32.o/xelab.exe xil_defaultlib.conf3B887A0FF22442ACAD7559670A4D090A-L xil_defaultlib-L unisim-L unimacro-L xilinxcorelib-L secureip-snapshot dll high - prj - clipsyn.prj
  
  Multi-threading is on. Using 6 son of a slave.
  
  Determine the order of compilation of HDL files.
  
  INFO: VHDL file analysis of [VRFC 10-163] 'C:/NIFPGA/iptemp/clip6BEF358BFCFF45AD8C68F5AB63F88A19/top.vhd' in the xil_defaultlib library
  
  INFO: [VRFC 10-307] analysis top part entity
  
  INFO: VHDL file analysis of [VRFC 10-163] 'C:/NIFPGA/iptemp/clip6BEF358BFCFF45AD8C68F5AB63F88A19/clock_div.vhd' in the xil_defaultlib library
  
  INFO: [VRFC 10-307] analysis feature clock_div
  
  INFO: VHDL file analysis of [VRFC 10-163] 'C:/NIFPGA/iptemp/clip6BEF358BFCFF45AD8C68F5AB63F88A19/pwmbuffer.vhd' in the xil_defaultlib library
  
  INFO: [VRFC 10-307] analysis feature pwmBuffer
  
  From static development
  
  Completed the static development
  
  Starting analysis of simulation data flow
  
  Filled with simulation data flow analysis
  
  Resolution for the simulation time is 1ps
  
  Compile the std.standard package
  
  Compile the ieee.std_logic_1164 package
  
  Compile the package ieee.numeric_std
  
  Compilation of behavioural architecture of the entity xil_defaultlib.clock_div [\clock_div (40000000,400000)------]
  
  Compilation of behavioural architecture of the entity xil_defaultlib.pwmBuffer [pwmbuffer_default]
  
  Compilation of behavioural architecture of the entity xil_defaultlib.top [top]
  
  GCC.exe: internal error: abandoned (collect2 program)
  
  Please submit a bug report.
  
  to get instructions.
  
  Correct the above error and check the syntax again.

  I have labview 2015 and vivado 2014.4 running on windows 8.1. Thank you in advance.

  Thank you for your response.

  I solved the problem. It is apparently caused by minGW installed with 14.4 vivado which does not work with windows 8. So, I replaced the minGW on vivado record 14.4 with the latest version of minGW.