Dark area on LCD
I have a T60 2623-D6U running XP, all updates, without any problems of system.
This model has a high resolution 14 inch lcd. A month ago a dark box appeared on the sixth lower part of the screen,
starting around the middle of the water and continue on the indicator light panel. It is about three inches in height
and two inches wide. It gets no worse, but it's very annoying. Is it useful to replace the lcd screen? How
determine the exact number of part? Is it possible that it is not the lcd screen that is the problem?
I don't have any problems when you use the external monitor.
Ian
These really healthy symptoms like the control panel. Looking to replace the whole assembly or the naked sign? Watch out for signs of eBay. Many sellers list panels T42/T43 T60 panels. They have the same number of the manufacturer part but a different review. They don't work and will likely damage your motherboard. The assemblies together tend to run about $100-$120 + shipping cost on eBay, you will need to decide if it's bad enough to spend money. I have one on a machine that comes about, but it has not yet been tested. If you are interested, send me a PM and I'll check. If you want the bare Panel, there are several numbers of parts, but it is important that you confirm that the FRU on the back for a T60.
Tags: ThinkPad Notebooks
Similar Questions
-
were are my save games for dark area located
were are my save games for dark area located
were are my save games for dark area located
Hello, Al,
It would help if you named your Windows operating system
Ex: sector of data\dark Users
Users/username/Appdata/Roaming/Dark sector
-Or-
Documents\XXXXX\Dark sector
-
Colors in the photo died in dark areas
I have a photosmart 309 a premium use OSX 10.6. Recently, colors in the photo died in dark areas in the engravings. Instead of black or grey, they are greenish or bluish. The print quality diagnostic report shows no any bar of shades of gray between the other bars of color printed. Ink levels show ok. Tried to print at different levels of quality with no satisfactory results. Any ideas?
Found the problem. Printer showed black photo as cartridge with ink, but it was in fact empty. Replaced cartridge and print very well now.
-
Hello! I'm all of a sudden bright blue colors on dark areas / my shots in LR5 black any ideas what's happening?
You have the active shadow clipping warning.
-
The layer mode to make text on it the light on dark areas and vice versa?
Hello
PShop CS6 extended.
I want to make a watermark for photos and have the text weak and contrasting with background while for the length of the text I have, as she travels through darkest areas that he's lighter and when in the lighter areas, it goes darker.
Thus, the line of text could go dark light then light and then dark...
I will also then apply a bit of relief effect to it.
I can't find an option to layer to give to this 'contrast' effect of the dark.
Merlin3
Typer in white and set its blending mode to difference. When you use the move tool to move the text layer it adapts automatically to the background color
-
MCE,
Uncheck view > overprint preview.
The Normal transparent dropdown value (not darken or similar).
-
Recently I faced a problem for my RAW of NIKON D750 images after imported into Lightroom.
For example, the brightness of the RAW images I shot in the camera is completely different after imported into Lightroom.
Yes, the RAW files include more data that can be adjusted backwards in brighter in Lightroom, but it occurs the most noise to the image that I don't really like.
I just curious is my setting in camera (maybe the screen is too bright perhaps?) or it is common that viewing through the camera LCD screen is brighter than the visualization in Lightroom?
Behind closed doors (the brightness I want):
Through Lightroom:
If you want to be in non-Nikon raws software processing, turn off the ADL and leave it off. The same applies to other settings where the camera is something special for lighting or the brightness of the camera jpg.
ADL will deliberately underexpose the image, then artificially pushed the dark areas while leaving only brighter area. This more dynamic compress in the camera-jpg, but will make no-Nikon software see the true underexposed image.
-
Export light and dark Photoshop filter areas?
I want to control the size of the filter paper note (filter Photoshop > paper) and export the results of the filter with the dark areas and light areas, which produces the filter. Except the vectorization will ignore light areas and draw only the dark areas, any solution?
Thanks for the help. I approached the problem differently and called for a solution.
-
Determine the area of the Area Light vs. Dark
Here's another unusual for you. Is it possible to have Photoshop to determine if the majority of a selected area is lighter or darker color.
For example, some pictures have a pretty consistent brightness/darkness in the whole image, which means it doesn't are not all areas that are unusually dark or light. In other cases, a picture can be average luminosity in most parts of the photo with the extreme (black background) dark areas so "average" the brightness is reduced a bit in this area very dark even though most of the image is not necessarily this dark.
Is it possible to split these until an estimate of just how much of a selected area is extremely dark, how much mi-tonique and how much is extremely bright? Thank you!
dgolberg
The following c.pfaffenbichler suggestion, you could do something like this to get the pixels below 33 lum...
var hist = app.activeDocument.histogram; var count = 0; var dark = 0; for( var index = 0; index < 256; index++ ) { count = count + hist[ index ]; if( index < (33*(100/255)) ) dark = dark + hist[ index ]; } alert("Pixels in selection: " + count + "\rPixels below 33 lum: " + dark +"\rPercent below 33 lum " + ( dark/ count ) * 100 );
You can modify the if statement for the midtones or highlights or add a couple more if statements to get all three in one pass of the index.
-
How to make the substantive focus area more dark?
Hello
I have the background to concentrate more dark area when I popup a window "info" with the PopUpManager. I love the out-of-focus effect, but it would be nice if it were about 50% darker. Does anyone know how to change this?
This isn't a priority, but rather a strong preference on my part.
Thank you.
http://blog.flexexamples.com/2007/10/12/globally-setting-modal-styles-in-a-Flex-applicatio n.
-
Hello world
I have a problem with my screen. Suddenly it went dark. The LCD is ok and an external monitor works just as well. I don't know that it is not too expensive to repair.
Someone an idea how much I have to invest in a service for it?
Thnx for a response.
libby200
> The LCD screen is ok and an external monitor works just as well. I don't know that it is not too expensive to repair.
The cost depends on the defective part
It seems that this issue is not related to the question of the graphics card because the external monitor is ok.Why are you sure that the LCD is ok?
You see something on the laptop s?If so the problem may be related to FL inverter. This part is not expensive but it of difficult to replace and I think the best would be to contact a local ASP.
The authorized service partner could provide that all need information on costs and how to manage it -
Why some black areas of the images rendered as bright green?
On the site: http://bleacherreport.com/tb/bc7Yq .jpg has pants of the coach, parts of the uniform of the players and a large part of the crowd in green instead of blue dark. The picture under the title of Al Lesar is normal. Under the heading related photos also have areas of greenery in the dark blue uniform and other dark areas.
Thanks cor - El worked like a charm.
-
Help, I paid for a led and everything I seem to get is lcd?
I have a W2371D when I look in the opinion, pdf, all I get is it is a LCD? I paid for an led can someone tell me what I really? Thank you
HP W2371d 23-inch diagonal screen is a Mointor LCD with LED backlighting. Almost all TV monitors and high current definition which are advertised as "LED" are the LCD with LED backlighting. This is done to distinguish them from the previous generation of monitors and HDTVs LCD. The previous generation used CCFLS (cold cathode fluorescent lamps) for the backlight.
You got exactly what you paid for.
If you have any other questions, feel free to ask.
Please click the White Star of KUDOS to show your appreciation
-
Hello
In fact, what are the LCD models support for collaboration to be integrate to a CTS-1300?
Thank you
This applies to all models
-
Areas 'Irregular' randomly across screen, very visible when we the white background
KDL-46XBR9, Mfg Nov 2009. I notice some darker areas of spotchy throughout the image, particularly visible on white background. I bought the TV in January 1010, it is out of warranty. If someone has noticed this? I've completed all troubleshooting suggested with no luck. It is certainly a problem with Sony TV and not with other connected devices or components of the environment.
Thank you!
Thank you. I've done all the troubleshooting methods I can find on the various boards of Sony and the problem is definitely the TV itself, not a video outdoors or the power source. I submit this question to the SonyListens and even if them are VERY responsive and understanding, the best they could do was offer a 15% discount on a new TV on the Sony site. It wasn't enough difference to replace the my XBR9 with a comparable model. It's just very disappointing that I have owned this TV for only 3 years. I don't want to deviate from Sony TV, as I have always possessed, but 3 years is simply too early for a TV to be unusable. The only thing I have left to try, as I have nothing to lose, is to remove the back panel and reinstall all connections. Are there tricks or difficult to remove the back panel? Nothing to watch? I'm pretty handy, but would like some advice.
Thank you!
Maybe you are looking for
-
NB - 100 - official support of Windows7 from Toshiba?
Now, there are Windows 7 drivers only for NB - 200 provided by Toshiba. Can we look forward to the support of Windows 7 at Toshiba for our NB-100 too? Thanks for the reply.
-
HP DeskJet Ink Advantage 2135: DeskJet advantage 2135 unrecognized on ASUS CHROMEBOX-M106U
I bought ASUS CHROMEBOX-M106U at the same time and DeskJet advantage 2135, but once I have connected printer to the computer didn't work, appears a message to install "HP Print for Chrome" on the shop online and follow the instructions, but it seems
-
Name of model Player DVD in Satellite A100-192
What is the name of the exact model of satellite a100-192 dvd player?can you please check it in Device Manager?
-
Hello I just bought a g6 HP Pavilion with Windows 8 on that occasion. When I started the system for the first time, a screen that had to do with the cursor, kind of calibration it for my personal use, came, but I hit something and the page moved wit
-
Impossible to get Dell Optiplex 9010 to start using Windows 7 DVD
Hello I recently bought a new Dell Optiplex 9010 and I tried to re install the OS by partitioning the disk into two discs. Optiplex 9010 is unfortunately not booting with DVD player. I activated the boot sequence in the WOODS at DVD, USB and hard dr