Data filtering
Hellocan anyone help on this below requirment? the requirment is, there are a many (2) replication (oracle for oracle only), the particular source of tables in database with all the data of 2 regions (United Kingdom and New Zealand), replication must come from a source of first target with only the datas UK and NDDN target will be with the NZ data. simple method how we can use to achieve this, the table has the column "region_name". but when I use under the control of filter caps letter No filtering as the name of the region, only its filtering as we mentioned in the filter condition, how to filter if region name the two caps (UK) are in small letters (uk)?
TABLE CBC. ACCOUNTS, FILTER (@STRFIND (rated, 'uk') > 0);
the same tried with where clause and the filter also, clause but is not region name of replication like UK (caps), only replication of data with "uk".
advice where to mention the terms of filter extracted also aside or replicate for better performance?
Thanks in advance.
Could you try with one of the following?
TABLE CBC. ACCOUNTS, FILTER (@STRFIND (@STRUP (rated), 'UK') > 0);
or
TABLE CBC. ACCOUNTS, FILTER (@STRFIND (UPPER (rated), 'UK') > 0);
The best way to do it is to use an extract that extracts all the data. Use then the two excerpts from datapump, which filters UK data and one that filters data NZ.
Tags: Business Intelligence
Similar Questions
-
Hello, dear comrades! I am facing a problem like a novice in data acquisition: there is a test bench which consists, apart from all the rest, two displacement sensors, acquiring data from the displacement of the rotor over time. the data that I get is loud, so I had to filter it. I'm using butterworth topology of a filter and a default break break high-frequency and low startup parameters. It's a bandstop filter because I checked the signal in the frequency domain and found the noise bandwidth. a few words on the subject: there is a metallic cyllinder, I use to test the sensors. so, when I don't move the object, the sensor shows a straight line, which means that the signal that I need a frequency 0. This means that any change in the frequency domain would indicate the frequency of the noise. I discovered that it is between 4000 and 4250 apprx. but no matter how, I tried the signal would not be filtered. the fact is when I send no dynamic data (lol-orange line) to the waveform on the filter it shows ok but the signal does not change over real time. so, I built a waveform taking into account features such as t0, dt of a form of initial wave, but after that I got an even more noisy data. It might be ive been trying to solve the problem for too long, I stuck to some obvious point, but I don't have any ideas, any help would be appreciated. Thank you very much!
Here we go...
-
Application roles data filters did not work
I put filters data for the role of BIConsumer by default, but it did not work.Hello
Default administrator can access all tables/columns presentation. In other words, only users not in the administrator group can be restricted permission for this configuration. That is why the weblogic user is able to see the object limits. Try to create a new user without privilege BIAdministrator and find the table of 'Time', your setting will work for sure.
Rgds,
DpKa -
View of XMLType of relational data - filtering at the beginning
Database version:
First of all, I want to apologize for my lack of knowledge in Oracle XML DB space. :)BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production PL/SQL Release 11.2.0.2.0 - Production CORE 11.2.0.2.0 Production TNS for Solaris: Version 11.2.0.2.0 - Production NLSRTL Version 11.2.0.2.0 - Production
I have a relationship master detail, stored in relational tables. I created XMLType view based on an XSD that relationship master detail. The problem, in that I am running is that this point of view is just a simple join of two tables. In real life I need to return a subset of these two relational tables based on filtering conditions on the master and detail tables. I know that I can use functions such as XMLExist to filter the dataset according to the needs, but the problem is that Oracle built the entirety of an instance of XMLType first (hundreds of thousands of records) and make the filter after the fact.
Is there anyway to exploit an XMLType view, but effectively filter useless records in relational tables?I'm afraid, is not possible.
With XMLExists, it's going to be all or nothing. We cannot push a filter predicate in a group together like that.The only solution I can think of is to extract the necessary parts using XQuery, but this way we need to rebuild things parents every time, thus negating the purpose of the view.
I think you need a "set view" to do this, but this is perhaps not an option?
-
Data filtering of the subsidiary ledger which are loaded into the tables of BAW of EBS
Hi all
Thank you for taking the time to read this post.
Environment
Applications of Oracle's BI 7.9.6 (financial and analytical project)
Oracle E-Business Suite 11.5.10
Question
I would like to be able to filter the source EBS 11.5.10 (mainly by the operational unit) that are loaded in the BAW. I've implemented financial analytics and project analytics and to the departure I intended according to the instructions described in the documentation of Oracle Oracle BI Configuration Guide Applications for Informatica PowerCenter section 5.2.2.4 users how to specify the great book or series of books for which GL Data is extracted, but then realized that it wasn't relevant to the General Ledger and would not impact the subsidiary ledgers.
I want to filter a (large) special operational unit (org_id) whose business do not want to include in their BI reporting at this stage.
Is it possible to do easily thanks to the configuration? I don't really want to be change all workflow or deletion at the .rpd level.
I can implement security OU_ORG to limit the data that end users have visibility to display, but my goal is not to fill the BAW tables withthis data in the first place (mainly as a result of the quality of the data volumes and data) which are perform my execution Plans.
Kind regards
Gary.Gary, this can be done by a simple configuration. For the moment, this done as a customization. Basically, you need to add a filter to the mappings of extract (SDE) that you want to limit the data.
-
I have the table called EMP
can you pls help me to filter the first join_date for each descpnid join_date descpn 101 24/01/2010 ABC 101 31/01/2010 ABC 102 07/02/2010 ABC 102 14/02/2010 ABC 103 31/01/2010 XYZ 101 07/02/2010 XYZ 104 14/02/2010 XYZ
the reqd. o/p
Thanks in advance24/01/2010 ABC 31/01/2010 XYZ
Something like this maybe?
SELECT DESCPN , MIN(JOIN_DATE) AS JOIN_DATE FROM EMP GROUP BY DESCPN ORDER BY 1
-
How to get data not filtered as o/p of the low-pass filter Group
Hello
IM new to Labview and exploring it.
IM implementation of a system in which I need to use a LPF and a series of filter pass band.
The filtered o/p of the LPF is as I / p for 1 GMP...
Later, the o/p UNFILTERED 1st BPF is as I / p for 2nd GMP.
The problem im facing is: I do not see any box in treatment that gives the data filtered or unfiltered together in the time domain of the signal.
Could you please help me with this asap... desperately need your help.
Thank you
PSADAP
There is not direct the tool to do this, but there is a solution to your needs.
Say that if you use a LPF (with cutoff frequency, say 50 Hz), now to get blocked (UNFILTERED in your terminology) signal, set a HPF (with cutoff frequency of 50 Hz).
See the block diagram
-
Filtering and treatment of bridge meta data
It would be great if you could add two features:
1. Add keywords to multiple files currently if two files share the same key words, but not in order, adding new is impossible without overwriting the existing keywords
2. the location data filtering, it would be great to filter by country say, just by keyword, date or other.
Thanks, Erik
This is the Forum to ask the characteristic of a Photoshop, not the bridge.
http://forums.Adobe.com/community/bridge/bridge_feature_requests
-
Upgrade to a recent version of Thunderbird, I can't filter my search by date more.
Upgrade to a recent version of Thunderbird, I can't filter my search by date more. The date format lost slashes (' 31/12/2014'-> '31122014') and date filtering doesn't work anymore, the filter seems to be non-existent.
I right click on the Inbox folder and the search window opens as an attachment. No date filter whatsoever is applied.
It is used properly before work.
I also checked the settings/options of date format, but they seem to be properly defined exactly as before (according to the Italian standard DD/MM/YYYY).
We run windows 7 and the Italian localization of tuberculosis, the most recent version.
It's the same thing to my colleagues (we use Thunderbird in our office), and I checked that this change took place only who has auto-update function on. Once you update, you lose the ability to search by date criteria.
Hope you can have a few clues about this problem, this proves to be quite annoying because it takes a lot of previous messages in search by date.
Thanks in advance,
Walter
ItalyYou will open everything: config and check that mailnews.search_date_format has.
Mine is the default = 0 and that gives 2015-04-30 (for me)
(Tools / Option / advanced/general / config editor and search for this entry)Edit
I tried a few variations. Take a peek inside -
Filter the data to WAV butterworth - problem
Hello!!
I have LabVIEW 2013
I m new in matlab and I have the following problem:
I want to filter voice and data to WAV file with block Butterworth Filter.vi. I don't know how to load the signal with his reading file Simple.vi, I know how to get the info on file with the Info.vi file, and I know that I can display data of waveform with waveform chart/graph. But I do not know how to properly set up butterworth filter in my diet, or better said how to properly bring data on this subject. When I m try to display data filtered with waveform graph I get only flat line.
I already checked OR examples (IIR Filter Design, IIR filter using option Specs, IIF assigned and response, IIR filter design). But after that, I felt even more stupid and lost.
In fact, depends on number of channels (mono/stereo) - should I separate?
Do I have to use a loop?
Second question - how many changes I have to do when I want to have a filtering in real time with filter.vi to butterworth (for example - to obtain data from the microphone)
Thank you very much!
Hi TOM 5 times.
you set a low pass of the 1st order, so he dampens high frequencies with only 20 dB/decade. It will NOT erase anything greater than 10 Hz, it will be just wet it!
You must use an order higher for your low-pass filter to effectively cancel higher frequencies!
-
OBIEE 11 g (data-level security) session variable
Hello
Use OBIEE 11.1.1.6
I would like to apply security to the level of data for a particular column as the year.
Ex:
I have 2 users A and B.
If a user has connection I want to display the values of the year: 2006,2007,2008
If a user B connection I want to display the values of the year: 2009,2010,2011
Can u share docs or referral link pls.
Thank youHello
Go to Manage > identity > double click the required user > click the permission button > click the data filters >, select the column required.
year column here > then set the year filter = 2006,07,08.
to another user that the same follow-up steps, then set the year filter = 2009,10,11.
for example, when the user login that it cannot see the data restricted.
Please check if useful/correct.
Thank you
Laeticia
Published by: 934322 on February 22, 2013 02:52
-
ORA-01436: CONNECT loop in the user data
Hello
I have a simple bit of SQL out details on HR supervisor strings in Oracle EBS:
It will return data normally without problems - e.g. data dummy below - looks very good. The names and made up person_ids.SELECT LPAD(' ', (LEVEL - 1) * 10, ' ') || person_id level_label , LEVEL , description FROM applsys.fnd_user u , hr.per_all_assignments_f h WHERE u.employee_id = h.person_id START WITH SYSDATE BETWEEN effective_start_date AND effective_end_date AND person_id = :personid CONNECT BY PRIOR person_id = supervisor_id AND SYSDATE BETWEEN effective_start_date AND effective_end_date
However, if I try for an another person_id, for which a user receives an error in one part of the Oracle EBS, I get this error:LEVEL_LABEL LEVEL DESCRIPTION 000001 1 Person Person 1 000002 2 Harry Marry 000003 3 John Smith 000004 4 Jenna Jones 000005 4 Her Name 000006 4 His Name 000007 4 Joseph Coat 000008 4 Les Miserables 000009 3 Mister Smith 000010 3 Miss Jones 000011 3 Andrew And 000012 4 Claire So 000013 4 Hilary Hi 000014 2 Jenny Jones 000015 3 Amanda Mandy 000016 4 James Jim 000017 4 William Wonder 000018 4 Crazy Cat 000019 4 Silly Cat 000020 4 Tall Hill 000021 4 Amazing Grace 000022 3 Lovely Mountain 000023 4 Joyous Spring 000024 4 Anonymous Name 000025 4 Brian Binky
ORA-01436: CONNECT loop in the user data
I'm guessing there is a loop of supervisor happening somewhere, but I don't know how to determine where it might happen.
I was wondering if there is any way I can change the SQL code to be able to work out where the loop can be, as there are about 50 people involved in Ministry to this user and I have been through all their records and can not see a loop to look through the Oracle HR screens.
I know it's a 'big ask' to ask a vague question about some oracle SQL, so apologies for that.
Any advice much appreciated.
Thank youHello
To see loops, do something like this:
SELECT SYS_CONNECT_BY_PATH (person_id, '/') AS path FROM applsys.fnd_user u , hr.per_all_assignments_f h WHERE u.employee_id = h.person_id AND CONNECT_BY_ISCYCLE = 1 CONNECT BY NOCYCLE PRIOR person_id = supervisor_id AND SYSDATE BETWEEN effective_start_date AND effective_end_date ;
If you would care to post CREATE TABLE and instructions INSERT for some samples, so I could test it.
Note there is no START WITH clause.
If, for example, Jones is the architect of Scott, Scott is the main contractor of Adams and Adams is the architect of Jones (much to other lines is not involved in a loop), then displays 3 rows of output, such as
PATH --------------------- Jones/Scott/Adams Scott/Adams/Jones Adams/Jones/Scott
Moreover, all the same CONNECT BY queries on these tables can be a lot faster if you've made the join and date filtering in a separate subquery first:
WITH combined_data AS ( SELECT person_id, supervisor_id FROM applsys.fnd_user u , hr.per_all_assignments_f h WHERE u.employee_id = h.person_id AND SYSDATE BETWEEN effective_start_date AND effective_end_date ) SELECT SYS_CONNECT_BY_PATH (person_id, '/') AS path FROM combined_data WHERE CONNECT_BY_ISCYCLE = 1 CONNECT BY NOCYCLE PRIOR person_id = supervisor_id ;
-
I use JDeveloper 11.1.1.3.0 and I created a table (as a master / detail) and I can't seem to get the filtering of data enabled for the table captain. I have the property "Filterable" of the column set to true, but can not see the boxes of filtering above each column. However, filtering is displayed for the secondary table.
How can I get this to work? Or is not possible for a Master table having data filtering?Hi Anil,
Can u please check that your Master ViewObject has viewCriteria and also check if the criteria name mapped in the median file your ViewObject as pageDef below
++
++ One also check your master af:table this has now in your JSPX
+ filterModel = "#{bindings." EmployeesViewQuery.queryDescriptor}"queryListener =" #{bindings. " EmployeesViewQuery.processQuery}' filterVisible = 'true ' +.
Kind regards
Suganth.GPublished by: celine on 18 January 2011 09:44
Published by: celine on 18 January 2011 09:44
-
Show all dates between date range (time Dimension is left outer join)
All,
I did some research on this issue, but in all positions on date variables, date prompts and date filtering I have not seen one exactly to my question (perhaps that they are and I don't have my head around it properly yet).
My requirement of report is to allow a user to select a start date and an end of day. The report is expected to show the activity of these two days - AND display 0/null on days where there is no activity. This second part is where I am getting hung up.
The paintings in question are:
Timedim
EventFact
CustomerDim
My MDB is configured as follows:
Left outer join of Timedim EventFact
Inner join CustomerDim EventFact
If I run a report by selecting the DAYS of Timedim and an EventFact measure1 with range day 01/01/2010-31/12/2010... A record for each day and it looks perfect because of the left outer join between Timedim and CustomerDim.
But... If I add a CustomerDim field, Select TimeDim.DAY, CustomerDim.CUSTNAME, EventFact.MEASURE1, OBIEE returns only records for the days that have record EventFact.
This is due to the fact that the Timedim is always external joined in EventFact, but adding in fact CustomerDim OBIEE set up an inner join between tables that will only return data where there are data EventFact.
There is a way around it in this simple case, and that is to define the relationship between CustomerDim and EventFact as an outer join as well. This will give the desired effect (but an outer join between the two tables is not the real relationship) and I have add an extra dimension and add additional sources of logic to a single dimension in MDB it becomes complicated and messy.
Also, ive ruined with the definition of the conduct in the relationship table, etc... but he gave not the desired effect.
Has anyone ever met the need for force display all dates within a range specified with a fact table that does not have an entry for each date?
Thanks in advance.
K
Published by: user_K on April 27, 2010 11:32Hi there, the easiest way is to the LTS himself. Double-click your LTS, go to the tab with the column mappings. Make sure you have checked "show no mapped" column.
You should see your new dummy column in the list, in the central part of mapping (IE not the right) just enter 0, or launch the expression editor and enter 0 in there.
simple! -
When I open firefox, first thing, it opens but the home page does not work. So, I have to re - install. Then it's ok for the rest of the day, but only to go down again the next day. What can I do to stop what is happening? I use bt.com home page.
1 reset the settings of the Internet browser. Taking the Internet Explorer for example.
(1) allInternet ExplorerandWindowsExplorer windows that are currently open nearby. Open Internet Explorer by clicking on theStartbutton. In the search box, typeInternet Explorer, then, in the list of results, click on Internet Explorer. Click theToolsbutton, and then click Internet options.
(2) click on the tab advanced and then click Reset. Select the check box to Delete personal settingscheck if you would also like to remove browsing history, search providers, accelerators, home pages, protection against the Tracking, andActive X data filtering.
(3) in the ExplorerSettings theResetInternet, clickReset dialog box. When Internet Explorer has finished the application from the default settings, click Close, and then click OK.
(4) CloseInternet Explorer.Your changes will take effect the next time you explore openInternet.
2 home page as new bt.com is reset.
3. clear all the cokkies and browsing history.
Maybe you are looking for
-
Hello I have a desktop Pavilion Elite e9220y Home Premium; Win 7; 64-bit computer. I'm wired; but have wireless for other things (Kindle, etc..) When I open internet access in the bar of tasks and under the "wireless network connection", I see MY con
-
Qosmio x 300-remote control and the console above the keyboard do not work
Sorry for my bad English... I have a new Qosmio x 300-11 L and the problem is my remote control doesn t work. What can I make it work again? And the console above the keyboard doesn t too much work.Thanks for help Sascha
-
Error constant csc.exe 550 d NB during the shut down
Hello! Got a new Toshiba mini netbook today and here is my problem:I always get an error of csc.exe when close my completely new installed windows7.Install microsoft .net cadre4 - as always suggested - does not solve the problem.Someone here to help
-
Keyboard-PS/2 on Port Replicator III problems
Hello I have no problem using my keyboard-PS/2 on the Advanced Port Replicator III. It is properly connected. When I first initialize my Tecra S3 the keyboard just doesn't work. I then wait for WinXP to appear and restart the system - that is, the ke
-
ENVY dv7-7390el: problem with installation of a 2nd disk (SSD)
Hello everyone. I want to put a 2nd hard drive in my laptop (dv7-7390el ENVY). It's a Samsung SSD (model: 850 PRO - 512 GB of RAM). However, even if I did first initialization with USB cable because it is new, when I link the new component using its