Data flow of user profile of IOM to your process

Similar Questions

• filling of form of process after update user profile

  Hi gurus,
  
  I try to create connector to provide a custom resourse, I have a create, revoke turn off custom particular to this resourse user
  but I am facing challenges in the update in the form of courses,
  Let me explain in detail, I used prefill lthe detail as process thread adapter, the adapter user profile update are triggered to update user information in custom resourse, they are processing the form card, but form of process is not be filled with the new values, if I change my mapping to retrieve the data of defination user then it wil work but process form the old data will ,
  
  is that I need to write java code to update the process shape? changes flow to the target resource. ?
  and prepopulate the fire dnt adapters when we update the user's profile?
  
  the pointers will be of great help
  thanx
  VM
  
  Edited by: VM02 on February 1st, 2010 14:57

  You have created the first name change task in the process of definition of this resource. Here, you mentioned that your work has been triggered.
  So that means that when you see the resources of this user profile, then you can see the change of name the task.

  Am I wrong?

  Sorry I did not notice a thing. You're talking about pre fill adapter. So when you create the first task name change in the process of definition of this resource, then you need a PROCESS TASK ADAPTER not PRE FILL for this.

  Your adapter process task copy value of definition to your process by the user.

  Simply create adapter with a variable and a single variable defined logical task.

  Attach it to your job of changing name and map with user definition var > name and adapter return the value in the name of the shape of course.

• Start the computer to a temporary user profile

  Original title: computer start in temporary files

  Trying to create another user account, in a way I think that file/s have been corrupt.  Now, the computer opens using temporary files and not as owner as a user.  Any ideas how to put this right?

  Hello

  If I understand correctly you have corruption of user profile on your computer, and this problem has been noticed to the creation of a new user account. Is this correct?

  Please provide information for a better understanding of the issue.

  1. are you able to boot to the desktop / your user account?

  2. What is the exact error message / code?

  3 what to you say that the computer starts in the temporary files?

  Please elaborate on the issue.

  Please post the requested information for a better understanding and to receive specific troubleshooting steps.

  Also see the following KB articles to help solve the problem.

  If you are able to boot to your desktop, and then follow the troubleshooting steps below. If you are facing publishes try it from Windows Xp in Safe Mode , and then continue troubleshooting.

  1. How to recover damaged Windows XP user profile

  2 How to copy data from a user profile damaged to a new profile in Windows XP

  Hope this helps

• Difficult to copy the local user profile

  I created a user on my PC account, because I hear that a limited account is better for security. I tried to copy my user profile on administrator account to the new account, but it fails every time with an que...userdata\index.dat error message cannot be copied into the new profile folder because access is denied.

  I even tried this by becoming owners of the folder target in safe mode with the administrator account on the base. Nothing worked for me. Any help would be greatly appreciated.

  Instead of trying to copy file-by-file - use the files & Settings Transfer Wizard (F.A.S.T.) to export the profile, and then import the profile.

  Or better yet...

  How to copy data from a user profile damaged to a new profile in Windows XP (Ignore the word "corrupt")

  or

  Copy user profiles in Windows XP

• pntools Setup error / component of virtual user profiles

  Hello

  I try to install pntools on a windows 2008 r2 server. I need to do this because I want to silo an application server.

  http://documents.quest.com/DOC28931 "before a Session host can participate in a silo, the virtual user profiles component must be installed on the server."

  And if I'm not mistaken this tool is part of the pntools?

  desktop experience is installed...

  but when pntools installing, I get an error:

  Error 1923.Services Quest Reminal Support Services (Services of Terminal Quest Helper Service) Service could not be installed. Make sure you have sufficient privileges to install system services

  Help!

  Hello Sander,

  VWorkspace PNtools cannot be installed on a Windows Terminal Server or RDSH server is not a supported configuration. You can install only on a VDI or Windows Server PNtools without the active role RDSH.

  The Terminal Server vWorkspace / role of RD session host installs the components required for virtual user profiles. The correct installation process would be:

  1. install Windows 2008 R2

  2. Add the role of the Desktop Session host remotely

  3. install the Terminal Server vWorkspace / RD Session host role (and other required roles)

  4. use the vWorkspace Console to configure user profiles virtual as required.

  Kind regards

  David

• How to upgrade the value of attaibute IOM user profile to process form data

  Hi Experts,

  In our environment, we have deployed IOM with connector SAP ER for the reconciliation of trust. HRMS contains more than 4000 active employees of which many user attribute i.e. EmailID are not updated.

  We performed reconciliation trust and IOM to all employees of 4000 user profile was created in IOM without emailid.

  We used reconciled target against AD and exchange account and all the ID obtained related.

  given that some of the employee record is not emailID, those receive notification by email.

  Can someone help me please how can I in bulk to update all the emailID user form for the AD/exchange process data.

  Kind regards

  David

  Hello

  Its very common requirement and it happens in all production environments.

  You must write a planner personalized who to read email ID of form for the AD/exchange process data and update to IOM profile.

  Also note: during this operation, just disable/remove the entry looking like USR_EMAIL change Email trigger etc. You will avoid the trigger unwanted operations. Once your event is over, you can re - map once again.

  HTH,

  ~ J

• How to upgrade the IOM user profile fields after the reconciliation of target user AD

  Hello

  I have a problem of set-aside. When I'm changing the values of the attributes of the user in Active Directory and then I run Active Directory target user Recon, AD in IOM account attributes are updated only but I would like to update the attributes in the IOM user profile too. Please, how can I do?

  Thank you.

  Milan

  You can create a personalized card which is your AD attributes flow into the user profile and add it as a response to the task 'receipt of update of reconciliation. "

  Use the UserManager api to update the user's profile.

• We use mandatory profiles in our Organization. So after that I updated to firefox, users will see "Hooray!" Your Firefox is up to date. "after each login!

  Since we use mandatory profiles for all users, after firefox gets updated the user is obliged to see a "Hooray!" Your Firefox is up to date. "every time the log message and start the browser.
  It is not easy or possible to update user profiles whenever firefox gets updated. Elsewhere lately, very often. Where in the world to server-side turn off this annoying message? Or at least how do I manually change the preferences file stored in the folder of mandatory profile to disable this annoying message?

  Try to set the pref browser.startup.homepage_override.mstone to ignore a mozilla.cfg file.

  • http://KB.mozillazine.org/browser.startup.homepage_override.mstone

  Place a local file - settings.js in the defaults\pref folder where you will also find the channel - prefs.js to specify using mozilla.cfg file.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0); // use this to disable the byte-shift
  

  See:

  • http://KB.mozillazine.org/Locking_preferences

  You can use these functions in mozilla.cfg:

  defaultPref();  // set new default value
  pref();         // set pref, but allow changes in current session
  lockPref();     // lock pref, disallow changes
  

• Error when copying data from a damaged to a new profile in Windows XP user profile

  Hello

  I think my user profile may be corrupted so I'm trying to create a new profile and copy the Ntuser files anywhere in the new profile by following the instructions in the Article ID: 811151.

  I created two new Admin accounts loged on my old account and connected to one of the new admin accounts.

  When I navigate to C : \Documents and Settings\ Old_Username  there are only two of the three files listed, NTUSER. DAT and Ntuser.dat.LOG, and both are slightly dimmed. When I copy these files and go in C : \Documents and Settings\ New_Username  I get an error saying "cannot copy NTUSER: it is used by another person or program." Close all programs that might be using the file and try again. »

  My home screen tells me that only the new admin account someone connected and when I go into the Task Manager there is no process running with my where ancien_nom_utilisateur, the entire SYSTEM and the new admin account?

  So, what I'm doing wrong, how to fix this and have is my Ntuser.ini file?

  Thank you very much...

  
  

  http://support.Microsoft.com/kb/811151

  Excerpt from the article below (note that it says "except the following files")...

  Press on and hold down the CTRL key while you click each file and subfolder in this folder, except the following files:

  • Ntuser.dat
  • Ntuser.dat.log
  • Ntuser.ini

  If I helped you overcome the "used" problem, you'd probably end the corruption of the copy!

• It is a group policy setting that allows Silverlight store data for a roaming profile user limited account?

  We have customers that use our Silverlight application. Application off because errors that the software is not able to store data about user roaming profile folder. So far, developers have a setting which allows the application to be listened to, but that makes it real slow. We try to get out of that. So my question is there a group policy setting they are system administrator can setup to allow Silverlight to store data for a roaming profile user limited account? Maybe allow data to be written locally only to the specific folder that requires Silverlight?

  Thank you!
  Carlos.

  Hi Carlos,

  ·         Are these computers on the domain?

  If the computers are on the field then I suggest you to ask your question on the Microsoft TechNet Forums.

  Windows XP IT Pro category

  If this isn't the case, you can post your question on the forums of Microsoft SilverLight.

• Mobile data turn power switch on the second user profile

  Hello
  I just put a second user profile on my Xperia z3 compact for my girlfriend, she's going to borrow the phone for a few weeks, but I can't find an option to enable mobile data using his profile.
  If I turn my profile and then go to hers, she'll have mobile data, but I wanted to be able to control it without having to change.
  There is no option to choose the NPP or mobile data turn on slide it towards the bottom of the configuration menus (the pencil icon) on his profile.
  I'm running the stock android 5.1.1 Xperia.
  Anyone know if this is possible and how? Thank you.

  can't find it on the user guide, https://support.sonymobile.com/global-en/xperiaz2/userguide/Multiple-user-accounts/

  I guess that's not possible. ?

• IOM 9 - How can I disable the user profile change email?

  I disabled the approval process for user profile change (subordinate tasks in this process task), but whenever a user edits their own profile, they always get an email from [email protected] with "Edit profile application received.
  
  I can't know what process is sending this e-mail. Someone at - it indexes?
  
  Thank you

  Change the defintion of e-mail not to include an e-mail address to send from. Or rename the definition of e-mail. It could be a setting in the configuration of the system as well.

  -Kevin

• Data flow of the User Interface general problem (LabVIEW 2012)

  I have problems reading & checking to a tab group user input (see the "Test settings" tab in the attached example).

  Essentially, I need to define and test many parameters.

  In the example, I need to create a bitmask of four switches to selection. Only the system works a treat, but in the context of

  the Panel tabs switches are never 'reached '. I tried to put some time structure around the switches (which works ex vivo

  See attached 'channelselect.vi') but the switches are never reached when I'm not in the code. Basically, I don't want

  Leave the pane until all parameters have been set and verifyied.

  I tried business structures (per group), structures plate Structures (group picture by picture), event (change nutton event)

  I expect the same problems with the other parameter sets. I need to change - set - check, in an order any.

  Understand that the "adjustment" mechanism is linked to a sub-vi/class method where the parameter is tested, defined and verified.

  It is a long-term approach to the fundamental question "How would you have it out"? I don't know that it is a misunderstanding of basic

  my part of the dataflow paradigm. I'm not looking for anyone to do my work for me, but I want to understand how this

  Works I can get on with my day.

  Thanks in advance for any help that you can present.

  You can still have the tab control.  It is just useless to do all your processing when the user changes the tab.  You can do event on the button presses as well.  Treat the VI as a whole VI, not different tabs that you have to manage.

• Historical report of user profile makes me last modified only value

  Hi all

  I installed and configured Oracle BI Publisher to view the IOM reports and I on the publication of the historic report of the user profile.

  This report makes me last value only. When I changed the value of 'Mobile', the report is like this:

  Filter criteria
  Date range of changes of	Wednesday, April 9, 2014 01:14
  Date range of changes to	Friday, April 11, 2014 01:14

  The user information
  ID: TEST. [email protected]	Organization: NetSec
  First username: Test	Employee status: Assets
  Last username: USERFORM	Employee type: EMP
  Manager User ID:	Identity creation Date: Friday, October 25, 2013 09:46 Casablanca
  Manager-name:
  Manager last name:

  The user information
  #	Profile setting	Value	From the date of the	Time from	Update by
  1	Connection Users.Updated	XELSYSADM

  Thursday, April 10, 2014 13:15

  Thursday, April 10, 2014 13:15

  System administrator

  2

  Mobile

  0908123456

  Thursday, April 10, 2014 13:15

  Thursday, April 10, 2014 13:15

  System administrator

  3

  Date of Users.Update

  2014-04-10 15:14:48 + 0200

  Thursday, April 10, 2014 13:15

  Thursday, April 10, 2014 13:15

  System administrator

  4

  Connection Users.Created

  XELSYSADM

  Thursday, April 10, 2014 13:15

  Thursday, April 10, 2014 13:15

  System administrator

  When I changed to another value, for example number I get the following report. (the mobile phone number information is missing)

  Filter criteria
  Date range of changes of	Wednesday, April 9, 2014 01:14
  Date range of changes to	Friday, April 11, 2014 01:26

  The user information
  ID: TEST. [email protected]	Organization: NetSec
  First username: Test	Employee status: Assets
  Last username: USERFORM	Employee type: EMP
  Manager User ID:

  Identity creation Date: Friday, October 25, 2013 09:46 Casablanca

  Manager-name:

  Manager last name:

  The user information
  #	Profile setting	Value	From the date of the	Time from	Update by
  1	Connection Users.Created	XELSYSADM	Thursday, April 10, 2014 13:29 Casablanca	Thursday, April 10, 2014 13:29	System administrator
  2	Date of Users.Update	2014-04-10 15:28:53 + 0200	Thursday, April 10, 2014 13:29 Casablanca	Thursday, April 10, 2014 13:29	System administrator
  3	Connection Users.Updated	XELSYSADM	Thursday, April 10, 2014 13:29 Casablanca	Thursday, April 10, 2014 13:29	System administrator
  4	Employee number	5678	Thursday, April 10, 2014 13:29 Casablanca	Thursday, April 10, 2014 13:29	System administrator

  Please, can someone tell me, how do I get all the users from a specific range of dates changes? Why I see the last change only?

  FYI: I use default IOM reports of IOM 11.1.2.2. Located in my env: /opt/oracle/Middleware/Oracle_IDM1/server/reports/oim_product_BIP11gReports_11_1_2_2_0.zip

  Thank you

  Milan

  The changes are classified according to the activity of update.  If you're updating 1 field at the same time, you will have a new section for each because they get the same verification key.  If you're updating 10 fields in a single click, you will get 10 updates to field in this verification key.  It is a grouping of changes like that.  If you just want to see all the changes, you have to modify your sql, or create a new report and not group them according to audit key.

  -Kevin

• Custom attributes not visible user on the user profile in OIM 11 g

  Hello
  
  As I have created a custom attribute in OIM11g. I'm not able to view the attribute after that I have the Fund a user to IOM.
  Please help me to solve my problem.
  
  Thank you
  Srikanth

  It's a very basic thing. Just trying to create a permission policy , and you know how to do it. For your reference, I am also paste the excerpt from Metalink Article

  After the creation of the UDF, please follow the steps below to make the visible UDF for editing by the user admin:
  1. navigate to create a new 'authorization Policy' as below:
  a. login to the user interface and click Administration
  b. at the top left, you'll see the authorization policy tab
  c. now, click on create a permission policy
  2. Please use the information to create the following permission policy
  a. name: policy of the UDF
  (b) name of the entity: user management
  c. Permissionsc. Permissions:
  i. edit user profile
  User profile of view II.
  Please ensure that the UDF is selected in the attributes of these permissions.
  d. data constraints: all users
  e. policy assignment: all users
  3. create a user called "useradmin" and add the below 2 roles: "."
  a. all users (this is default)
  b. identity user administrators (this will provide administrative support to this user tab so that it can administer other users)
  4. create another end user called "testuser1" people the necessary fields.
  5. now connect as "useradmin.
  6. search a user called "testuser1" and open the user.