Data mining - error on the insertion of the TREE_TERM_MINPCT_MODE value in the parameter array

Similar Questions

• When you try to copy a. DAT in Vista file, get error 0x80070057L, the parameter is incorrect

  I tried to copy a *. DAT file from a CD on my HARD drive. During the last 5 seconds, I always get the following error message:

  Error 0x80070057L the parameter is incorrect

  I am able to open the file, but can not copy. I tried on my laptop (Vista SP1) and on an another desktop running XP and get the same error.

  What causes this problem?

  Hello

  The problem occurs when you try to copy other files?

  Check if you can copy files in Mode without failure.

  Refer to this article for help:
  http://Windows.Microsoft.com/en-CA/Windows7/start-your-computer-in-safe-mode

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• No data found error in the loop of the nested table

  Hi team,

  I'm working on the example to get data in a nested loop using table, but didn't get the no data below found error

  DECLARE
  Is of TYPE numlist array of integer;
  list1 numlist: = numlist (11,22,33,44);
  BEGIN
  List1.Delete (2);
  DBMS_OUTPUT. Put_line ("is the last element" |) List1.last | | "total elementis' | List1.Count);
  List1.extend (4.3);

  
  BECAUSE me in list1.first... List1.last loop - get ANY DATA FOUND error in this line
  DBMS_OUTPUT. Put_line ('Values' | list1 (i));
  end loop;
  END;

  Could you please help me where I am wrong.

  Thank you very much.

  You get this error because the element 2 has been removed and in the loop, you are iterating over all the elements from 1 to 3.

  To avoid this, use the type of loop below:

  l_index: = names_in. FIRST;

  While (l_index IS NOT NULL)

  LOOP

  DBMS_OUTPUT. PUT_LINE

  (names_in (l_index));

  l_index: = names_in. NEXT

  (l_index);

  END LOOP;

  PL/SQL practices: Loop, first and last

• File backup failed. The error is: the parameter is incorrect. (0 x 80070057).

  I get the following error when I run "back up files" and tries to access "backup setting change" (only).

  I tried most option all found on TechNet to see disp.

  No problem running "full pc upwards."

  Log name: Application
  Source: Windows Backup
  Date: 09/11/2011 11:19:55
  Event ID: 4104
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: desktop
  Description:
  File backup failed. The error is: the parameter is incorrect. (0 x 80070057).
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      4104
      2
      0
      0 x 80000000000000
     
      21308
      Application
      Desktop
     
   
   
      The parameter is incorrect. (0 x 80070057)
      57000780E00400005B0600005C060000420ED1665C2BEE174B64529CB14610EA71000000
   
  

  Help, please

  Phillip

  Hello

  Make the SFC (System File Checker) scan and see if the problem persists.

  http://support.Microsoft.com/kb/929833

  Hope this information helps.

• code error 80070057 the parameter is incorrect

  Hello

  I have a server with Windows server 2003. I have a problem when I try to add a new user role in a portal Application COM + system applications displays the following message:

  An error caused while processing the last operation:

  error 80070057 the parameter is incorrect.

  System has been installed to update security for windows server 2003 recently. Is it possible to fix it, or maybe I need to uninstall the security updates?

  Thanks in advance,

  Kind regards

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Error code; The parameter is Incorrect

  My operating system is "Windows XP Home." I tried to print a multitude of photos using the "Photo Print Wizard." When I click the link icon in the "picture and Fax Viewer", I get the error code; The parameter is Incorrect. The wizard does not open. I noticed that the icon in the 'Control Panel' folder has changed and the name is 'File' rather than 'printers and faxes '. I made every effort to change, including to remove and reinstall my printer but nothing helped. I can't delete the file or find the root of this folder in 'windows '. It seemed to me that the path of the file has been changed due to a change of name of this file in the path. However, I can still use a printer installed by other software to print. By the way, when I reinstall any printer, I do not see the printer in this file but it always says 'File' in the 'control panel '. The shimgvw.dll file is registered correctly as I can tell. If I try to launch 'Photo and Print Wizard' from the link on the left in the "Control Panel" itself, I just get a beep for error but no error code. The wizard does not start. This wizard is a very important tool to print multiple selections at once. I havn't used in awhile, so I don't know when it is first of all changed. Any thoughts?, anyone? Is there another install name of the package in the wizard to reinstall it from Microsoft?

  THIS WILL SOLVE THE PROBLEM

  1. Click Start> run type REGSVR32 photowiz.dll click OK

  NOTE: leave a space between the two.

  FACT!

  This will re - save the "TheAssistant printing photographs"and it will work from the folder 'My pictures'.

  * However, this does not resolve the question "renaming" of the file folder in the 'Control Panel', 'printers and faxes '.   That remains a mystery, I hope I can solve.

  2. If you are unsure if you have this module, DO a SEARCH using the search tool in the "Start Menu".

  3. If the search shows nothing in the directory... (drive letter) \Windows\System32, and then search the directory(drive letter)\WINDOWS\ServicePackFiles\i386, Scroll to module; photowiz.dll and 'Copy and paste' to your windows folder directory as described above. Depends on your drive letter on which you originally installed "Windows XP". It is usually a letter'C'.

  5. If you had to 'Copy and paste' this module in your operating system folder. Then, you must re-register the above method module.

  Thank you, GARTH

   

• CreateProcess error = 87, the parameter is incorrect

  Java_home in my computer's C:\Program Files\Java\jdk1.6.0_24
  
  classpath =. ; % java_home%\lib;%java_home%\lib\tools.jar;D:\weblogicSA2011\wlserver_10.3\server\lib; E:\Jdeveloper_11114\oracle_common\modules\oracle.jps_11.1.1\jps-manifest.jar; E:\JDEVEL~3\patch_wls1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar; E:\JDEVEL~3\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar; E:\JDEVEL~3\JDK160~1\lib\tools.jar; E:\JDEVEL~3\WLSERV~1.3\server\lib\weblogic_sp.jar; E:\JDEVEL~3\WLSERV~1.3\server\lib\weblogic.jar; E:\JDEVEL~3\modules\features\weblogic. Server.modules_10.3.3.0.jar; E:\JDEVEL~3\WLSERV~1.3\server\lib\webservices.jar; E:\JDEVEL~3\modules\ORGAPA~1.1/lib/Ant-all.jar; E:\JDEVEL~3\modules\NETSFA~1.0_1/lib/Ant-contrib.jar; E:\JDEVEL~3\patch_wls1033\profiles\default\sys_manifest_classpath\webl
  
  Path=%JAVA_HOME%\Bin;%JAVA_HOME%\jre\bin; E:\JDEVEL~3\patch_wls1033\profiles\default\native; E:\JDEVEL~3\patch_jdev1111\profiles\default\native; E:\JDEVEL~3\WLSERV~1.3\server\native\win\32; E:\JDEVEL~3\WLSERV~1.3\server\bin; E:\JDEVEL~3\modules\ORGAPA~1.1\Bin; E:\JDEVEL~3\JDK160~1\jre\bin; E:\JDEVEL~3\JDK160~1\Bin; E:\JDEVEL~3\patch_wls1033\profiles\default\native; E:\JDEVEL~3\patch_jdev111; E:\JDEVEL~3\WLSERV~1.3\server\native\win\32\oci920_8;D:\Maven\apache-Maven-3.0.2\bin; C:\Windows\System32; C:\Program Files\Fichiers Network\KanKan\Codecs of Thunder; C:\app\Administrator\product\11.2.0\dbhome_1\BIN
  
  How to set the java path in Jdev 11.1.1.5?
  
  ------------------------------------------error-----------------------------------
  
  BuildFile: C:\JdevWorkspace\ANTdatasource\Project3\build.xml
  [echo] - 13-
  [echo] - 16-
  
  makeDataSource:
  
  BUILD FAILED
  java.io.IOException: cannot run program 'C:\Program Files\Java\jdk1.6.0_24\jre\bin\java.exe': error CreateProcess = 87, the parameter is incorrect
  at java.lang.ProcessBuilder.start(ProcessBuilder.java:460)
  at java.lang.Runtime.exec(Runtime.java:593)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  to org.apache.tools.ant.taskdefs.Execute$ Java13CommandLauncher.exec (Execute.java:832)
  at org.apache.tools.ant.taskdefs.Execute.launch(Execute.java:447)
  at org.apache.tools.ant.taskdefs.Execute.execute(Execute.java:461)
  at org.apache.tools.ant.taskdefs.Java.fork(Java.java:784)
  at org.apache.tools.ant.taskdefs.Java.executeJava(Java.java:211)
  at org.apache.tools.ant.taskdefs.Java.executeJava(Java.java:132)
  at org.apache.tools.ant.taskdefs.Java.execute(Java.java:105)
  at weblogic.ant.taskdefs.management.WLSTTask.execute(WLSTTask.java:115)
  at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
  at org.apache.tools.ant.Task.perform(Task.java:348)
  at org.apache.tools.ant.Target.execute(Target.java:357)
  at org.apache.tools.ant.Target.performTasks(Target.java:385)
  at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
  at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
  at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
  at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
  at org.apache.tools.ant.Main.runBuild(Main.java:758)
  at org.apache.tools.ant.Main.startAnt(Main.java:217)
  at org.apache.tools.ant.Main.start(Main.java:179)
  at org.apache.tools.ant.Main.main(Main.java:268)
  Caused by: java.io.IOException: CreateProcess = 87, the parameter is incorrect
  at java.lang.ProcessImpl.create (Native Method)
  to java.lang.ProcessImpl. < init > (ProcessImpl.java:81)
  at java.lang.ProcessImpl.start(ProcessImpl.java:30)
  at java.lang.ProcessBuilder.start(ProcessBuilder.java:453)
  ... more than 30
  
  Total time: 1 second
  
  
  
  --------------------------------------------------------------------------------
  
  <? XML version = "1.0"? >
  "< default"makeDataSource"="makeDataSource"basedir = project name =". ">
  
  < path id = "wl.classpath" >
  "< dir="E:\Jdeveloper_11115\wlserver_10.3\server\lib fileset ">
  < name = "*.jar" / >
  < / fileset >
  < fileset dir = "E:\Jdeveloper_11115\modules" >
  < name = "*.jar" / >
  < / fileset >
  
  < / path >
  < echo message = "- 13 -" / >
  < name taskdef = "wlst" classname = "weblogic.ant.taskdefs.management.WLSTTask" classpathref ="wl.classpath" > "
  < / taskdef >
  < echo message = "- 16 -" / >
  < target name = "makeDataSource" >
  < wlst debug = "false" failOnError = "true" executeScriptBeforeFile = "true" fileName = "makeDS.py" classpathref ="wl.classpath" > "
  < / wlst >
  < / target >
  < / project >
  
  
  --------------------------------------------------------------------------------
  
  Connect ("weblogic", "welcome1", "t3: / / localhost:7001" ' ")
  Edit()
  
  Print "---4"
  
  # Change these names necessary
  dsname = "TestDS.
  Server = "AdminServer.
  CD("Servers/"+Server)
  target = cmo
  CD("..) /..")
  
  startEdit()
  # Start the creation
  Print "creating JDBCSystemResource with the name ' + dsname"
  jdbcSR = create (dsname, "JDBCSystemResource")
  theJDBCResource = jdbcSR.getJDBCResource)
  theJDBCResource.setName (dsname)
  
  connectionPoolParams = theJDBCResource.getJDBCConnectionPoolParams)
  connectionPoolParams.setConnectionReserveTimeoutSeconds (25)
  connectionPoolParams.setMaxCapacity (100)
  connectionPoolParams.setTestTableName ("dual")
  
  dsParams = theJDBCResource.getJDBCDataSourceParams)
  dsParams.addJNDIName("jdbc/TestDs")
  
  driverParams = theJDBCResource.getJDBCDriverParams)
  driverParams.setUrl ("jdbc:oracle:thin:@localhost:1521:ORCL")
  driverParams.setDriverName ("oracle.jdbc.driver.OracleDriver")
  driverParams.setPassword ("welcome1")
  
  driverProperties = driverParams.getProperties)
  
  good = driverProperties.createProperty ("user")
  proper.setValue ("hr")
  
  jdbcSR.addTarget (target)
  
  Save()
  Activate (Block = "true")
  
  Print "made the configuration of the data source.

  A simple Google search shows that error 87 is usually the classpath is too long.

• Error message: the parameter is incorrect, while playing music

  I have WMP 11 for Vista, and recently it stopped working properly for the songs I have. When I go to any folder with a song or a video and try to double click on it nothing happen. then I right click on the song or the video and choose the option "Open with Windows media Player" and an error message is displayed: "/ * the queue name * / the parameter is incorrect"... what should I do about it? I am sure that the problem is with WMP because I have a few other players that work perfectly. Thanks for the attention.

  Media Player problem

  Hello

  You can view these methods:

  Method 1:

  I suggest you to see these steps:
  a. click on start.
  b. click on run.
  c. type this command regsvr32.exe. wmp.dll
  d. press on enter.
  Method 2:
  You can also check:
  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

• Date / time error on the SPA3102 after upgrade to the SW version: 5.1.7 (GW)

  After the upgrade of the software of the date and time of my SPA is taped:

  Current time: 01/01/2003 12:10:11

  and therefore can not save. I tried to change to multiple NTP IE: time.nist.gov or ntp.sipgate.net but nothing gives.

  Anu suggestions how to solve this problem?

  Make sure that the machine is on the internet or that he makes the DNS server addresses.

  You can also try to point to an IP address of the local computer to use his time.

• using dbms_metadata for retrieve data type name and the parameter of a procedure

  Hi guru,.

  is there a subprogramme in dbms_metadata which will extract that ideally the specifications of a procedure/function call

  If the my program spec is proc1 (id1 number, CRC in varchar2, id2 number)

  If I call something like

  Select * from table (dbms_metadata. < subprogramme > ("proc2"));

  It gives me

  Id1 number

  CRC in varchar2

  Id2 number

  ideas/pointers?

  Why do you need to do this?

  See S/n/ALL/$user_arguments.

• the directory path not valid lack Pathé under the parameter array

  I created the directory xyz & data also being developed under the table of privilege.
  
  But the problem is that how this path of the directory would be added through command in the table of parameters as mentioned.
  

    select *  from v$parameter where name = 'utl_file_dir';
    
    

  You put the directory path in the directory parameter.

  You have to put the directory it.

   output_file := utl_file.fopen ('XX_HRMS',v_file_name, 'W'); 
  

• Procedure to take income data set and return the result set

  Hi all
  
  I have a situation where there will be a 'standard' set of data (source_data below), and I need to get information on outcomes for certain groups of customers (client_data for example). As SQL right it would be very easy (see below) - real world problem is a bit more complicated. However, what I would do is set up a procedure so that I can pass on my data of client variables and it will spit back on a set of data that is identical to the output of the given SQL.
  
  A pointer in the right direction would be appreciated. If I could 'pass customer data' as a string that contains an SQL query, which would be even better, for example
  
  GetResults ("select client_id, min (whatever_date) from some_client_data which...", MyOutputRefCursor?)
  

  create table source_data
  (client_id integer,
  tdate date,
  amount number(6,2));
  
  create table client_data
  (client_id integer,
  critical_date date);
  
  insert into source_data values(1,to_date('20090104','yyyymmdd'),1000);
  insert into source_data values(1,to_date('20100104','yyyymmdd'),2000);
  insert into source_data values(1,to_date('20110104','yyyymmdd'),3000);
  insert into source_data values(1,to_date('20120104','yyyymmdd'),4000);
  insert into source_data values(2,to_date('20090104','yyyymmdd'),5000);
  insert into source_data values(2,to_date('20090604','yyyymmdd'),1000);
  insert into source_data values(2,to_date('20100104','yyyymmdd'),2000);
  insert into source_data values(3,to_date('20091004','yyyymmdd'),3000);
  insert into source_data values(3,to_date('20091104','yyyymmdd'),4000);
  insert into source_data values(4,to_date('20090104','yyyymmdd'),5000);
  insert into source_data values(4,to_date('20090604','yyyymmdd'),2000);
  
  insert into client_data values(1,to_date('20110104','yyyymmdd'));
  insert into client_data values(2,to_date('20090604','yyyymmdd'));
  
  
  select c.client_id,
    sum(CASE WHEN tdate < critical_date then amount else null end) used_before,
    sum(CASE WHEN tdate >= critical_date then amount else null end) used_after
  from source_data s
  inner join client_data c on s.client_id = c.client_id
  GROUP BY c.client_id;

  Thank you
  
  Jon

  Hello

  You can do this with a view. Make settings of the view a global temporary table:

  create GLOBAL TEMPORARY table client_data
  (       client_id       integer
  ,     critical_date      date
  )
  ON COMMIT PRESERVE ROWS
  ;
  

  Then, you can create a view based on your real of the table and the parameter array:

  CREATE OR REPLACE VIEW     special_clients
  AS
  select c.client_id,
    sum(CASE WHEN tdate < critical_date then amount else null end) used_before,
    sum(CASE WHEN tdate >= critical_date then amount else null end) used_after
  from source_data s
  inner join client_data c on s.client_id = c.client_id
  GROUP BY c.client_id;
  

  Because the table of parameters is a global temporary table, each session will have its own private copy of the table of parameters and therefore his own private version of the view.

• I installed creative cloud including cc in lightroom and photoshop cc, but get a ' 87 error: the parameter is incorrect "when I start one or the other.

  This error condition appears when you start these applications.  In addition, lightroom cc can't seem to handle the conversion of my lightroom catalog 5.

  Hi rich,

  Please see the links below:

  LoadLibrary failed with error 87: the parameter is incorrect (PSSC6-64, Win8.1x64, ATI driver)

  WIN8.1 and LoadLibrary failed with error 87: the p... - Logitech Forums

  Kind regards

  Sheena

• Error message: &amp; quot; The parameter is incorrect. &amp; quot;

  Whenever I go into the properties for one of my subjects, I get this error message:
  "The parameter is incorrect."
  
  If I change all the properties and click OK, it gives me the message again and does not save my changes.
  Anyone have any ideas?

  Nevermind, I found someone had the same problem. I'm done decomipling my chm file to create a new project. It worked.

• Download of CSV using Browse point (don't get no data found error)

  Hello
  
  I use procedure below to download CSV in my table.
  
  CSV is to have null values in some places ex: 1,.
  2,0.999
  3,
  4,0.696
  
  below the procedure works fine when I am downloading as CSV: 1.0
  2,0.999
  3.0
  4,0.696.
  
  My table is seen as two columns, and I get no data found error when downloading a CSV of null values.
  
  I went through import data in Excel to the database table but no use...
  
  Please help me on this.
  
  Procedure
  ===========
  

  DECLARE
  v_blob_data       BLOB;
  v_blob_len        NUMBER;
  v_position        NUMBER;
  v_raw_chunk       RAW(10000);
  v_char   CHAR(1);
  c_chunk_len  number := 1;
  v_line  VARCHAR2 (32767) := NULL;
  v_data_array  wwv_flow_global.vc_arr2;
  
  BEGIN
  
  -- Read data from wwv_flow_files
  select blob_content into v_blob_data  from wwv_flow_files
   where UPDATED_BY = (select max(UPDATED_BY) from wwv_flow_files where UPDATED_BY = :APP_USER)
  AND id = (select max(id) from wwv_flow_files where updated_by = :APP_USER);
  
  v_blob_len := dbms_lob.getlength(v_blob_data);
  v_position := 1;
   
  -- Read and convert binary to char
  WHILE ( v_position <= v_blob_len ) LOOP
   v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
   v_char :=  chr(hex_to_decimal(rawtohex(v_raw_chunk)));
   v_line := v_line || v_char;
   v_position := v_position + c_chunk_len;
  -- When a whole line is retrieved
   IF v_char = CHR(10) THEN
  -- Convert comma to : to use wwv_flow_utilities
    v_line := substr(v_line, 1, length(v_line)-2);
     v_line := REPLACE (v_line, ',', ':');
  -- Convert each column separated by : into array of data
     v_data_array := wwv_flow_utilities.STRING_to_table (v_line);
  -- Insert data into target table
     EXECUTE IMMEDIATE 'insert into table_name@Schema1 (col1,col2)
      values (:1,:2)'
      USING
        v_data_array(1),
        v_data_array(2);
        
        -- Clear out
     v_line := NULL;
    END IF;
   END LOOP;
  
  END;

  concerning
  Chauvet
  
  Published by: Chaumont on 26 September 2012 10:52
  
  Published by: Chaumont Sep 26, 2012 22:25
  
  Published by: Chaumont on 27 September 2012 01:58

  Chambers,

  You can use wwv_flow_utilities.array_element to avoid any no_data_found. The function does not raise any errors. For example, for the line which only have a value of table when you wait 2, it can be useful.

  EXECUTE IMMEDIATE 'insert into table_name@Schema1 (col1,col2)
      values (:1,:2)'
      USING
        wwv_flow_utilities.array_element(v_data_array,1),
        wwv_flow_utilities.array_element(v_data_array,2);
  

  Kind regards
  Christina