Data problems many fusion - cliché registration

Similar Questions

• Suspend data problems

  First of all - I am very new to SCORM, LMS, or something of the sort.  I know very, very little about it.

  We sent our module to the client in order to implement in their LMS - everything was perfectly fine, except that we received a complaint concerning our suspend data and the way in which the progression of the user is followed.  Essentially, he has not followed or follow-up in a strange way.

  Basically, all we need to ensure the follow-up is the progression of the user in the slides so that we a) they all the b) back to the module slides and continue viewing, if they interrupt their viewing of the course.

  There are quiz questions, but the answers do not need to be followed.

  My questions would be a) we filled the SCORM manifest & other options e-Leaning according to the wishes of the customer, and requiring their LMS, my assumption would be that progress and follow-up would be processed without any additional customization from us, which is a false assumption? (b) I noticed that two of our quiz questions were always reporting a quiz, they shouldn't be, we re - publish and test again, but it will be at least a day before having your comments, I wonder - could cause this issue alone suspends data problems?

  Any comment is appreciated-

  Been awhile. My apologies if this is too late or problems are solved.

  For the first part, which suspend_data customer "would see". It's a strange request, as most users have no idea what suspend_data is much less how it should look really! I suspect that you mean the results during the recovery of the lesson, it's not what you expect... and if that's the case, what is the precise, unexpected result?

  As replied, a blade be 'full' it must play along, so if you have, say, audio in there but don't expect not for audio to play through, slide out to the end, is not 'complete '...

  Quiz was being classified... How? If you Quiz slides in there, I don't think you can force them to not be classified (although maybe you can, I've never tried). If this isn't the case, Quiz slips, and they are made by hand, as you of COURSE questionnaires it is not marked to report interactions? Best way to check is which to choose

  Project > advanced interaction

  and see if one of these interactions have 'Track Score' active.

  If you can get nothing to report for the 'quiz' but can not get the slide completions to report correctly, so my suggestion is your ' c)' option. A button marked at the end that says something like "Click here to complete the lesson" often works best. A scored interaction, statement of completion and score to 100%...with as an interaction of caterpillars, they should get 100% by clicking this button. Who can also offer a way for suspend_data solve... rumors have that including caterpillars interaction can help you with questions...

  HTH!
  Erik

• How to record data (problem on registration of data in excel)

  
  
  

• out of space on a data store, have great cliché to commit

  Through a series of automated tasks and bad luck, here's where I'm stuck.  looking for advice on the best way to fix it.

  ESXi server with the local data store

  A server (Blackberry server, not quite important and have a good backup, worst case I could rebuild without too much pain)

  • Slim 30 GB put in service

  Server B (Production and Production Exchange server file server):

  • 2 virtual drives

  • Drive hard 1: 80 GB thin provisioned

  • Hard drive: 500 GB 2 thick put into service

  • There is somehow a snapshot on this disk which is 196GB (which has a few things needed for this topic)

  • VSphere client does not show that there is a snapshot, but the navigation data store, it's there

  I am running very low on space (30GB free) on the data store.  I have a 1 TB NAS device (it is the NFS case) but it's mostly full with other backups of VMs whose only good backup from Server B that I would prefer not wipe.

  This snapshot will commit with what little free space?  If so, how given that vsphere client shows that there is no snapshot?

  Looking for pros for a good solution/order issues in.  I am of course headed out of town for a week and I hope the 30 GB I have free will last while I went, but will keep you informed along the way.

  In my opinion, there should not be any need a lot of additional disk space for deleting a snapshot on a thick disc put into service. To remove the snapshot, create another cliché on the virtual machine, and then open the Snapshot Manager and select "clear all". This will engage all snapshots on the basic disk, no matter whether they are displayed in the Snapshot Manager. Due to the size of the deletion my take several hours (depending on your speed of storage)

  With one snapshot, you have, it's no problem, but if there were several snapshots, you need to be careful, depending on the version/version of ESX (i) installed. Make sure you don't miss disk space during the validation process of the snapshot, because for example many changes to a thin provisioned VM. To be on save her side, you should do the deletion either while the virtual machine is not used much or - even better - while the virtual machine is turned off.

  André

• Problems with Fusion 3.1

  I am a long time user of Vmware workstation and server on PC.  I bought the Fusion to my new Mac and restored a PC I replaced it.  Two problems:

  1. the virtual machine reports an Intel gig NIC that the virtual machine has no driver (even after installing the Vmware Tools).  I need to download a driver from Intel and put it on a disc?  This seems very complicated - why no driver integrated?

  2. I have no way to see the files that make up the virtual machine.  All of them seem to be wrapped in a single file on my file system.  So I can't access the .vmx file or holds an see why is the file from more than twice as large as the data.  Is it possible to edit this file or married?

  Thank you for your time,

  G.

  Hello

  Welcome to the VMware community forums.

  1. the virtual machine reports an Intel gig NIC that the virtual machine has no driver (even after installing the Vmware Tools).  I need to download a driver from Intel and put it on a disc?  This seems very complicated - why no driver integrated?

  It's a little weird, what OS are you trying to install? Just about any recent OS that I am aware of gate drivers for the e1000 card intel.

  You try to run an OS preinstalled OEM version? If so, you are aware that you are most likely break the EULA that comes with the operating system?

  The NETWORK adapter that is used is determined by the type of guest OS you selected. VMware Tools comes with drivers (e.g. VMware vmxnet on earlier versions of windows), but not for the e1000. You can set the type of NETWORK used manually in the vmx file.

  2. I have no way to see the files that make up the virtual machine.  All of them seem to be wrapped in a single file on my file system.  So I can't access the .vmx file or holds an see why is the file from more than twice as large as the data.  Is it possible to edit this file or married?

  The file extension .vmwarevm on the folder that make up your VM's OS X show it in a single file. Actually, it still is a folder and referred to as a bundle. You can open it in the Finder by selecting 'Show contents of the file' from the context menu.

  --
  Wil
  _____________________________________________________
  VI Toolkit & scripts wiki at http://www.vi-toolkit.com

  Writer to the blog www.planetvm.net

  Twitter: @wilva

• Live data / problem with the permissions of files

  Just try an old version of Dreamweaver MX 2004. I use my service for server/test remotely webhosting server functions. It is running PHP 4.3.10 and MySQL 3.23.58. I was able to set up the database connection and test - retrieve a recordset with no problems. By following the tutorial, I found that visualized wouldn't work, he just gave me a warning about file permissions be wrong. It turns out that when Dreamweaver creates a temporary file of the work-in-progress to upload to the remote server, the file is created on the server with owner = rw, group = rw, r = world, which explains why it does not-group must be set to group = r. The file is created on the fly and then immediately deleted by Dreamweaver so it is impossible to manually set permissions on the server and probably pretty useless too.
  
  I tried just to save the file and the preview in the browser that forces again to be uploaded to the remote server. The first time, it resulted the browser offering a download of the file box instead to run the page. The reason is - again - that Dreamweaver updates downloaded file permissions to include the Group = rw. If I manually set permission for the group the r = group that it works very well.
  
  It turns out that Dreamweaver always puts the permissions of files on the downloads of files (checked php and html) on the remote server / tests to include the Group = rw. Once I have it placed manually on the remote server / tests to the Group = r for a php file, everything's fine and later additions of the same file do not change it again.
  
  I checked with the Web hosting company and their second line reported back that the default file permission they put on downloaded files includes group = are so DW that causes the problem of definition of group = rw first. I was confirmed using WS - FTP to download the same (renamed) file in the same directory target and the set of permissions were owner = rw, group = r, world = r.
  
  Then
  
  Can someone tell me please how to change permissions that DW sets on the files written on a remote server, because I spent countless hours on it without success. Go looking at other posts in this forum, it could be that other users hit the same kind of problem with DW8

  Specifically, Dreamweaver supports the ability to use a remote server for testing purposes. It seems reasonable to test the site locally using the real remote environment in which it must be applied if the site is not already online.

  It turns out that the problem for me is related to what the remote server and tests of server connection configured to use SFTP. This caused the files created on the remote server to have RW set for the group that has been causing all the problems. When the value to use FTP standard, is very well - prepare file permissions properly when downloading and data online works as expected.

  Another SFTP side effect was that the site FTP log contained the Interline - am added to many of them whenever the remote server has been consulted but no text. On the configuration of the connection to standard FTP log fills up with messages as expected.

• iTunes with cellular data problems

  iTunes is not online when I travel, the cell data box is checked in the settings, but still it says I am offline, some answers anyone?

  Hi Noreple,

  Looks like you have your cellular data settings allows iTunes to use your data, but it continues to tell you that you are not connected. I would start by first quit iTunes and apps settings:

  Force an app to close the iOS

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset

  If the problem persists, I would then reset your network settings:

  Go to settings > general > reset, and then choose an option:

  ...

  • Reset network settings: When you reset the network settings, the previously used networks and VPN settings that have not been installed with a configuration profile are deleted. (To remove the VPN settings installed by a configuration profile, go to settings > general > profile, select the profile, and then tap on delete.) This removes also other parameters or the accounts provided by the profile). Wi - Fi is turned off and then on again, disconnect from any network you're on. The Wi - Fi settings and "Ask to join networks" are lit.

  • ...

  From: reset iPhone

  CLOS

• Restoring data problems blackBerry smartphones

  I have problems with the restoration of data on my Blackberry Curve 8330. I am running BB DM 5.0.0.11 and on my v4.5.0.160 of the device.

  I have a backup file recorded since the time that I am trying to restore my contact list and my list of messages of. I'll list my procedure below to get the error message:

  Open the Desktop Manager, type password device, click Backup and restore, click Advanced, click on the file-> open, select the file and open it and I get a message that says "Error - data was not recognized by the office."

  Recently I reinstalled windows to fix my slow computer, I reinstalled DM on Blackberry.com website. And it won't let me open the file.

  Does anyone have advice on this? Thank you!

  You're right, that's exactly the same problem. I'm surprised I missed this thread, I've combed over here for an hour! To keep an eye, thank you!

• Problem of fusion Lightroom cc 2015.2.1 picture

  I upgraded my old CC of Lightroom for the new CC 2015.2.1.  I'm on an IMac Intel Core I7, 8 GB 1600 Mhz DDR3 and NVIDIA GeForce GTX 680MX 2048 MB.

  I had no problem before making a HDR or photo Panoramo merges. Since the update, photo fusion no longer works and I always get the following message is displayed:

  "unknown error occurred".

  Did he have the same problem? Where you able to identify and solve the problem?

  Thank you

  Thank you very much for the tip. Although the 'photomerge working collapsed with 2015 1.1for me. I unchecked "Use graphics processor" and it worked again. I guess I'll use it as a work around until the next update.

• Problem to activate my registration

  I try to activate my registration for Adobe Photoshop CS3 on the Internet but it keeps telling me that there is no connection.

  I enter the correct serial number, how to get around this problem.

  Thanks for any help.

  I don't know if it will work, as it is said CS5.5 and later versions, but you can try:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

• Analysis of JPEG data problem?

  Why I get the error "Could not complete your request because of a problem with JPEG data analysis" when I try to open the photo files in the elements (7,0) editor? I was able to open these files in Photoshop, a few weeks ago and now I get an error. This happens to a lot of my files. How can I fix it? Please help me!

  I found a solution, however, only for MAC users:

  Step 1: Download the image to your "downloads" folder

  Step 2: Open your "Photos" on your Mac program.  (I currently run OS El Capitan)

  Step 3: Go to your 'File' menu and scroll down to "import".

  Step 4: When the window opens, go to your folder that you have saved your photo in "downloads".  Click on the name of your photo.

  Step 5: After the opening of your photo, return to the 'File' menu, but this time click 'Export '.  It will have an arrow that goes to the right and click on "export 1 Photo... »

  Step 6: When the window opens, click on the "file type" JPEG to TIFF.

  Step 7: After you change the type of file, go down to the right of the window and click "export."

  Step 8: Click on the location you want to save the file, and then click New at the bottom right on "export".

  The file appears in the folder you selected.  I opened the files with success in different versions of Photoshop (2014 and later versions).

• Games problem VMware fusion 5.02

  This only happened on 5

  hardware: macbook pro 15 mid 2012 retina

  OS: MAC mountain lion 10.8.2

  Audio-visual system: window7 & 8

  game: Street fighter iv arcade edition

  everything was OK in 5.0 any for win7 or win8,.

  After the upgrade to 5.02, I can connect on the menu of the game except for the matches. VMware display an ERROR has occurred.

  There have been some problems reported with the 5.0.2 update and I recommend going back to the previous version your used before upgrade to 5.0.2.  You can download previous versions of VMware and then uninstall/reinstall Web Site.

  Use the following link: Download VMware Fusion

  Then click the watch download button and it will default to the last (5.0.2 now) but now select 5.0.1 or 5.0.0 in the Version drop-down list box.

  Also note that VMware Fusion of uninstalling/reinstalling does not remove your VMS and not counting the download time, it should take less than 5 minutes to uninstall/reinstall VMware Fusion itself.  More don't forget to uninstall/reinstall (not repair install)

  VMware Tools after downgrade of VMware Fusion.

• Using inputRangeSlider for Dates problem

  Hello

  I use 11g JDeveloper (11.1.1.6)

  I followed Duncan Mills blog: https://blogs.Oracle.com/Groundside/entry/using_inputnumberslider_for_dates

  I did everything the blog said successfully and with the help of Frank Nimphius and Timo Hahn.

  But now I am facing a problem in the RangeSlider when I move the cursor at the beginning of the RangeSlider it comes up with an error of

  -Error: The number is outside the valid range.

  The number must be between 1.357016358764E12 and 1.384491556713E12.

  I did the getters and setters as follows

      public void setDateRangeSliderEndDate(long dateRangeSliderEndDate) {
          this.dateRangeSliderEndDate = dateRangeSliderEndDate;
      }
  
      public long getDateRangeSliderEndDate() {
          
          Calendar rightNow = Calendar.getInstance();
          long timeInMil = rightNow.getTimeInMillis();
          return timeInMil;
      }
  
      public void setDateRangeSliderStartDate(long dateRangeSliderStartDate) {
          this.dateRangeSliderStartDate = dateRangeSliderStartDate;
      }
  
      public long getDateRangeSliderStartDate() {
          
          Calendar prevYear = Calendar.getInstance();
          prevYear.set(Integer.parseInt("2013"), Calendar.JANUARY, 01);
          //prevYear.add(Calendar.YEAR, -1);
          long timeInMil = prevYear.getTimeInMillis();
          return timeInMil;
      }
  
      public void setDateRangeSlider30DayIncrement(long dateRangeSlider30DayIncrement) {
          this.dateRangeSlider30DayIncrement = dateRangeSlider30DayIncrement;
      }
  
      public long getDateRangeSlider30DayIncrement() {
          long dayInMil = 30*24*60*60*1000;
          return dayInMil;
      }
  
      public void setDateRangeSlider1DayIncrement(long dateRangeSlider1DayIncrement) {
          this.dateRangeSlider1DayIncrement = dateRangeSlider1DayIncrement;
      }
  
      public long getDateRangeSlider1DayIncrement() {
          long dayInMil = 24*60*60*1000;
          return dayInMil;
      }
  

  When I move the cursor between the two, or at the end, and even to load I get no error,

  Its only when I take the cursor to the beginning of the cursor of the range which is 01/01/2013 I get the above error in the number outside the range valid

  I also debug code to know that since the beginning, it gives the start date value 1357024983415

  So why in particular it raise an error when I move the cursor to point to the 01/01/2013

  Help, please

  Kind regards

  Benson

  Hello

  Solved the problem by replacing

  public long getDateRangeSliderStartDate() {  
  
          Calendar prevYear = Calendar.getInstance();
          prevYear.set(Integer.parseInt("2013"), Calendar.JANUARY, 01);
          //prevYear.add(Calendar.YEAR, -1);
          long timeInMil = prevYear.getTimeInMillis();
          return timeInMil;
      }
  

  with

      public long getDateRangeSliderStartDate() {
  
          long timeInMil = 1356978600000L;
          return timeInMil;
      }
  

  As she was giving the error of

  I spent the StartDate in this timeInMil long mode = 1356978600000L;

  Thank you

  Kind regards

  Benson

• Unione dati, problemi importazione

  Ciao,.

  STO importando una series di dati da files .csv gia in altre occasioni come ho fatto senza some problema.

  Unfortunately questa volta visualizzo correctly the anteprima, my importzione short qualcosa che seems più che altro bug...

  Tutti i dati appaiono ripetuti randomicamente e in ordine errato.

  Qualcuno ha some suggestions?

  E may successo a qualcun'altro?

  Grazie

  Andrea

  The overview of multiple discs has been buggy for several versions now.

  The only workaround is to copy your fields into a new document, and then generate the merger without preview. (Or, if you need to preview in the new document, CANCEL after preview and then reopen the dialog box to merge.)

• Problem with fusion Lighten/Darken

  I'll have a problem with the lighten and darken modes in fusion CS6. Once I have merge the layer it gets these weird bands. It is fine until I have merge layers together or export. See photos:
  I have tried different combinations of pictures and have reset the settings of Photoshop. I never have this issue before.

  Thank you
  Benjamin

  

  

  Figured out there is a problem with the lens profile corrections in Lightroom and Camera Raw. Specifically, distortion correction.

  Banding in Photoshop when you use mix mode to lighten or darken and cab & or Lr

  Chromosomal marking when using corrections profile in Camera Raw and Lightroom

  Benjamin