Data sheet
I am trying to use the Garage Band for audio recordings. I need to know whether it is a mono recording. I needed 16-bit and I found that it is 16-bit. It is 44.1 kHz and 96/128 kbit/s. Also, where you will find the size of the file to send?
Thank you
GarageBand can record audio on tracks or stereo Tracks, dependent mainly on the value of Mono. However, the output is always stereo (two tracks).
The number of bits depends on your settings in the Bounce window. If you select AIFF, you have the option to select 16 or 24 bits
In GarageBand sampling frequency is 44.1 kHz
You check the sample rate, bit depth and channel of a file Mode when you select in the Finder and press command + I. The information window is displayed the properties.
Hope that helps
Edgar Rothermich - LogicProGEM.com
(Author of "Graphically improved manuals")
http://DingDingMusic.com/manuals/
"I could receive some form of compensation, financial or otherwise, my recommendation or link."
Tags: iLife
Similar Questions
-
Data sheet says Camileo P10 save as .mov but the device saves as AVI.
I just rec'd a P10 as a gift for Christmas.
Looking at the specifications on the data sheet in line and also that the sources say that the P10 records video in .mov files but the unit I can only save as in the form of .avi files. However the box itself says that it records jpg images and video as avi (H.264)
And I had to search the Internet for a long time to find a safe codec file CoreAAC Audio (FF) to allow Windows Media Player read the AVI with sound.
That's happened? Why this change?
NB I found a plug technique in line which says that the camera had the .mov and .avi formats. If this is true how access us a menu that can allow us to switch between file formats?
Hello
The .mov is an abbreviation of Quicktime. QuickTime is a multimedia technology from Apple.
The .avi format is defined by Microsoft. AVI is the format most common for audio/video data on the PC it is Microsoft's answer to Apple's QuickTime technology.AVI is a very powerful architecture and newer codecs like DivX or XviD can have a quality similar or even better than DVD, AVI files.
The said user manual supported file formats are Jpg for pics and MOV videos.
It is strange why the P10 recorded in .avi...
However, it is avi and mov supports the same properties. -
Satellite P870 - Atheros gigabit NIC cannot be set to 1 GB according to technical data sheets
I just got my P870/027 and the Atheros AR8161/8165 PCI - E Gigabit Ethernet (NDIS 6.20) NIC connect controller only review of 100 MB/s and not to 1 Gbps according to laptops.
The latest driver is installed and when I try to adjust the speed via the Device Manager it only shows 1 GB only 10 MB & 100 MB. I check the BIOS, but there is no configuration to set the speed of the network card.
Is there another way to set the speed, or does not have data sheets.
Thank you
AndréHello
Found the laptop on the Australian driver page:
http://www.MyToshiba.com.au/support/computers/satellite/p870/psplba-02300s/download?OS=25Here you can download the last available LAN driver v 2.0.12.13
This version is installed on your system? -
According to technical data sheets, I found the following information:
Acer Aspire switch 11 - SW5-171-39 LB
CPU = Intel Core i3-4012Y
Storage = 128 GB SSD
Height x width x depth = 1 x 11.7 x 8.1
Weight = 3.42 lbsAcer Aspire switch 11 - SW5-171-80 KM
CPU = Intel Core i5-4202Y
Storage = 128 GB SSD + 500 GB
Height x width x depth = 0.4 x 11.7 x 7.6
Weight = 1.87 lbIs this right? The model with additional HARD drive storage has a lighter weight and more small dimmentions? Or is it a mistake?
Hello
Specification of the switch 11 (SW5-171-xxxx):
-11.73 x 7,57 x 0.42 inch pad only.
-11.73 x 8.09 x 0.98 inch pad and dock
-11.73 x 8.09 x 0.98 inch pad and dock with HARD drive
-1.87 kg with battery 3 cells, pad only
-3.42 kg with battery 3 cells, pad and dock
-3.64 kg with battery 3 cells, pad and dock with HARD drive
-
Licenses on telepresence servers table in data sheet is not not to screen?
I have deployed CUCM with driver version XC3.0.3 and vTPS (telepresence virtual server) version 4.1 (2.29).
I made a model of the Conference on the driver to use HD 720 P 30 and content sharing 720 p 5.
When I start a conference call with 2 endpoints VC I see 2 screen licenses are used, one for each endpoint.
According to table 8 'telepresence screen of the license server by call for each Type of call' in the telepresence Server data sheet
http://www.Cisco.com/c/en/us/products/collateral/conferencing/telepresen...
Such resolutions should take license screen 1/2.
Is this a bug or a configuration problem?
If I call the Conference with audio only I see that no license used at all while the table indicated 1/52 of a license to screen will be used...
You must be looking at the driver to see the actual number of resources on the server of telepresence. The GST will report the number of screens are used, but driver will report the number of licenses of screen used for each call.
See images attached to a test that I made just now with a GST which has only 3 licenses of the screen, but I'm able to connect up to 6 endpoints, each connected end point uses 1/2 a license of the screen. The Conference model I use is set up similar to yours, but it has 720 p 5 active content. Appeal of bandwidth is 1152 kbps.
-
Interactive data sheet with pictures for sharing and updating
I design an interactive card with images. (I design the form in Indesign CC. The intent of the data sheet is to keep our impeccable design while making it easy for our customers to fill out information about new products. They need to update images, is there a way in Acrobat to change images with ease and keep the image locked boxes. We do not want to jeopardise the design. Is there any other software which can be used for best results. !
The answer is no. Looks like you'd be much better of creating a web site for this using a nice WordPress theme.
-
Dear all brothers.
I want a query to retrieve the data sheets for employees, as the start_date and end_date, leave_type arguments pending these things.
Thank you in advance, I appreciate your help.Hello
Hope under query allows to obtain information on pending leaves: -.
Select Papf.employee_number 'No. Emp'
, papf.full_name "name of the Emp.
, hat.creation_date 'let applied '.
,(Select Fu.user_name from)
Apps.fnd_user fu
When user_id = hat.last_updated_by) "last approver.
, decode (hat.status, 'E', 'pending approval', 'Error', ' there 'would be', 'Deleted', 'Other') 'current state '.
, hat.item_key, 'key '.
, hats.information1 'Absence Start Date.
hats.information2 'Absence End Date'
(by selecting paat.name in apps.per_absence_attendance_types PAAT
where absence_attendance_type_id = hats.information5) Type "Absence".
, hats.information6 "without category".
hats.information9 'Status of Absence'
of apps.hr_api_transactions hat
apps.hr_api_transaction_steps hats
apps.per_all_people_f women's wear
where 1 = 1
and papf.person_id = hat.selected_person_id
and hat.transaction_id = hats.transaction_id
and hat.status = 'Y '.Thank you
Avinash -
Flash Pro CS6 - export the Sprite with EaselJS JSON Data sheet
Hello
I have imported a png sequence into Flash Pro and tried to get the new generation of spreadsheet sprite functionality to export JSON data in EaselJS format, but when I choose the option EaselJS in the drop-down menu, I only get a window function:
(function (window) {}
(} (window));
However, when I export to JSON format, I get the appropriate JSON data. Is this a known issue with the support of EaselJS in CS6, or should I do something differently? I prefer not to use Zoe, the SWF file to the usefulness of the AIR EaselJS, because the png is large enough and Zoe seems to have a cap of maximum dimension for the export of sprite sheets, I get 12 of them while Flash Pro is able to automatically detect dimensions, export a sprite sheet, which is great, I just need to generate the data EaselJS with her. Thanks in advance!
try to use a movieclip with some symbols on the timeline?
-
Download a data sheet excel using Oracle APEX 3.2
Hi all
Please help me out to download the data in the worksheet excel using oracle APEX 3.2.
Follow the steps mentioned in the link below, but even after I get a error saying no data found
http://avdeo.com/2008/05/21/uploading-Excel-sheet-using-Oracle-Application-Express-apex/
Please help me to go further.
Kind regards
SantiniHello
Try the Jarola.
-
Coupling of data sheets back on Watch
does anyone know why the data was left on the clock after that I have it not matched to my iPhone? I am trying to reset the watch manually, but I thought that should have been given automatically as soon as he was unpaired iPhone
Hello
Except when the watch is connected to the iPhone via the app shows of the disconnection, it will be unpaired from the point of view of the iPhone.
As you found, must then manually delete and reset the device via the watch settings.
More information:
Cancel the twinning of your iPhone - Apple and Apple Watch Support
-
PCI-6120 noise performance is higher than in the data sheet.
I use the PCI-6120 card in warp mode, at 1 MHz. everything works, but there seems to be a discrepancy between the measured acoustic performance (with 50 ohm or short) and performance between quotes in the datasheet, 6120/6115. Here is my comparison.
City of range AI N + Q (uV) measured N (uVrms)
+/-42 V 550 1410
+/-20 V 220 600
+/-10 V 110 280
+/-5 V 69 140
+/-2 V 31 60
+/-1 V 18 30
+/-0.5 V 10 20
+/-0.2 V 5.1 15
It seems to me that N + Q data are shifted a range of analog input as numbers are good but not on the beaches of right. For example, the range V cited 42 N + Q agrees with the V 20 measured noise range. Everyone knows this?
So what you measured here is actually the system noise, who we spec on page 4 of the specification, uncertainty about the noise, which we spec on page 3. The noise of the system for the PCI-6120 is shown below. To calculate the noise from the system of these specs, you use the following formula:
(LSBrms system noise) * (Input Range) /(2^Resolution) = Vrms system noise
Thus, for the 42V range, noise specified in LSBrms is 1.2 LSBrms. The input range is 84 (±42V is total 84 volts). The resolution is 16 bit. So:
1.2* ((84) /(2^16)) = 0.001538 V = 1 538 uV
For each of the beaches, the sound of the system is:
Range LSBS Sound system (µV) 42 1.2 1538.09 20 1.2 732.42 10 1.2 366.21 5 1.5 228,88 2 1.7 103.76 1 2 61.04 0.5 2.2 33,57 0.2 2.8 17.09 Hope that answers your question.
-
creating a data sheet music without copy music.
I have large music files in several locations. I would like to create a database excel all the songs and artists, to better manage my files. But the files are large and I don't want to make a mistake and copy the files together, I want to just copy the text data in a spreadsheet file. Any suggestions on how to open a music file and copy only the text data in a spreadsheet? Thank YOU, T McK
Hello
I suggest you check a third-party program that could help with the issue.
Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
Extreme SMART II parameter data sheet?
Hello
I recently bought a Sandisk Extreme II SSD and I would like to know if there is a sheet of SMART for this available drive somewhere parameter specification as other SSD manufacturers often provide. I'm writing a monitoring application of SSD for Linux and for best results, it would be useful for me to know what mean exactly SMART for this drive settings. Thanks in advance.
The new Sandisk dashboard software (here: http://kb.sandisk.com/app/answers/detail/a_id/15108 ) provides all the information I needed tab diagnostics SMART thanks Sandisk! Although it would be nice if this information were more readily available (IE available directly from SMART parameter / SSD firmware?):
SanDisk Extreme II (firmware: R1311)
5 / 05 - retirement block County [1 block = 4 MB]
9 / 09 - Power On hours
12 / 0c - device Power Cycle Count166 / A6 - Min W/E Cycle
167 / A7 - Min Bad Block/Die
168 / A8 - maximum wipe Cycle
169 / A9 - Total bad block171 / AB - program Fail Count
172 / AC - clear Fail Count
173 / AD - Cycle way Erase
174 / AE - unexpected loss of power County187 / BB - a reported not rectifiable errors
194 / C2 - current temperature
212 / D4 - SATA PHY error
230 / E6 - XX percentage Total p/e County. YY
232 / E8 - spare remaining blocks [%]
233 / E9 - GB Total wrote to NAND
241 / F1 - GB Total wrote
242 / F2 - Total GB read243 / F3 - []
-
Where can I get the sheet (energy consumption) for device Cisco Firesight 750, I don't have it on the site of the CISO.
Hello
Here are the details of FS750 power supply:
http://www.Cisco.com/c/en/us/TD/docs/security/firesight/541/install-GUID...
Thank you
Guillaume
-
Drop database connectable to including the file system data sheets files
I did experiments with the connectable Oracle12c to database functionality and have noticed that when I "drop database connectable to pdb1 including datafiles', I get the message that the database snap-in has been dropped." I also see that all files in the tablespace for the PDB except the SYSTEM data file have been deleted.
I want to remove the folder that has been used for the pluggable database after that the PDB fell, but cannot because the file SYSTEM data is left behind.Is it possible to delete the data file SYSTEM for a pluggable database once he fell? Or this part forever from the database of the container?
Thank you
This forum works on a Server Windows 2012.
Thanks for the Bug information. There is no error in the alert.log file, but I found a trace file with:
ORA-01265: cannot remove the D:\ETC\ETC\SYSTEM01 DATA. DBF
ORA-27056: could not delete file
OSD-04024: cannot delete the file.
S/O-error: (32 OS) the process cannot access the file because it is being used by another process.
This seems to be the same problem as described in bug 17659954, so I can follow in investigating the recommendations of bug
Thanks again
-
Hello
Y at - it all sheet capacities NSX.
I mean, like:
-How logical router or a capable edge router, like how many speed, broadband bandwidth, VM can support, best practices for each tenant, etc.?
-What device to each use of the Protocol. I mean like OSPF, it cannot make virtual link and BGP does not to "jump following auto ' for iBGP.
For the first part, you can start here:
Maybe you are looking for
-
iTunes will not see my iPhone 6 s
-
Can you help me?
-
I can start my Satellite A350D from a USB?
I tried searching but have not found an answer. Thanks for the help. John
-
I have an iPhone 6 with 9.2 running on it. When I finally upgraded, I continued request to enter my iCloud password settings. I think that I have fixed (somehow), but now my battery runs completely in 12 hours. The info on my phone says that my e-
-
Help improve llb of Labview 5.1 to 7.1
Hello guys and girls, I have a serial.llb works very well with labview 5.1, and I've updated my version of labview 7.1, when I open the Serial.llb using labview 7.1 to upgrade, open, but the removal of the program many features making it the screw wo