I can start my Satellite A350D from a USB?

I tried searching but have not found an answer. Thanks for the help.

John

Hey Super,

I m not owner of the Satellite A350D, but you can check yourself:

Attach a USB bootable or stick and the power of your laptop. Press the F12 key to enter the BIOS boot menu. If your laptop computer is able to boot from USB, you can select the attached USB startup device.
If this isn't the case, you can boot the USB t.

Tags: Toshiba

Similar Questions

  • My office uses Windows 7 and my computer is running Vista 64 bit. My home computer can work with my office from a USB files?

    original title: office / Home compatibility

    My office uses Windows 7 and my computer is running Vista 64 bit.  My home computer can work with my office from a USB files?

    The game, August 5, 2010 15:24:35 + 0000, JerryPMP wrote:

    My office uses Windows 7 and my computer is running Vista 64 bit.  My home computer can work with my office from a USB files?

    Yes. There is no problem with their two different versions of
    Windows. The files contain not what anyone who still marks that
    Windows version they were created under.

    But there is a potential problem. If the files have been created with a
    another version of Office that you have, you may have
    Difficulty reading the. For example, Word 2007 and 2010 creates .docx
    files by default (unless you tell her save as .doc) and if you
    an earlier version of Word, you will not be able to open a .docx file
    unless you install the compatibility pack to
    http://Office.Microsoft.com/en-us/Word-help/open-a-Word-2007-document-in-an-earlier-version-of-Word-HA010044473.aspx

    or http://tinyurl.com/29f5scy

    Ken Blake

  • Has anyone managed to start the Switch 10 from a USB?

    I have only the option of widows Boot battery and usb is not listed as an option.

    Thank you.

    Thanks for the replies.  I tried several times to get the Switch 10 to show me the options to start without success.

    Here is my procedure: I use the laptop settings to enter recovery.  I choose the option restart.  I chose to change the settings for uefi.  I disable secure boot.  I have enable f12.  Once the machine restarts, only the windows startup option is available.

    What I am doing wrong? I can't get the machine to boot from a usb key.  It's a little disturbing, given that I created a usb backup by using the backup utility Acer.

    I have a drive ready to go with 10 windows on it, after using Rufus.  Would love to load and preview Windows 10.

    Thanks for any light you can contribute on it.

  • I can't install Windows 7 from a USB boot

    Greetings! I tried to boot Windows 7 from a Flash DRIVE to a computer with a rather lame GNU/Linux based OS called Canaima 4.0, but when I did, a screen with this text appeared:

    SYSLINUX 4.07 ESD 2013-07-25 Copyright (C) 1994-2013 h. Peter Anvin et al. No. DEFAULT or the found configuration user interface! Start: _

    The specifications of the system are:

    Intel Celeron CPU 1.46 GHz/1 MB N2805
    2 GB DDR3 RAM
    HARD DRIVE 320 GB 2.5 "SATA
    In addition, is 32-bit

    The computer is a copy of Venezuelan-Chinese of the HP EF10MI2.

    What can I do maybe? I really want to change the operating system on this computer, any solution will be greatly appreciated!

    Step 1: configure your BIOS to boot from the USB key:

    HP computers - configuration of the Boot order in the system BIOS. HP...

    Click Install now

    Accept the license agreement

    When the option is displayed to select a type of installation, click (Custom advanced)

    Click on drive Options

    Select the disc/s click on Delete

    Click new

    Click on apply

    Click OK

    Click Format, and then click next to proceed with the installation

    Learn more about the start of the player:

    How to start a laptop HP Pavilion G7 to drive USB Flash - YouTube

  • Unable to start by Satellite 5105 from recovery CD

    Family XP Edition using
    The original error was reading disc error, I used the recovery CD and the system started. I tried to use the installation disk of scan and the machine would not pass the free space controls 5% verified.
    He then gave error reading disc once again, now for about 8 hours, that he sat to erase all the data of the hard disk 1.
    I realize I could have to repalce the HDD, but just turn off the machine or y at - it some special way to leave this?
    Thank you

    Hi Lisa,

    From what you say it sounds as if your hard drive is certainly u/s, so there is no point in allowing the CHKDSK to continue further. I think that you need to replace the hard drive (or have an ASP to do for you if you prefer) and then reinstall your system from the recovery CD.

    Kind regards

  • How can I recover the files from my USB Flash drive before it will be deleted?

    My USB Flash drive has files on it from another computer and only the files that have been stored on the flash drive which cannot be recreated. How can I recover the files? The Flash Player is telling me that it must be reformatted and the files will be deleted. It's two computers I use. Help, please

    Hello

    Looks like it might be a problem with the flash player.

    Step 1: Try to use the USB stick on another computer or a different USB port.

  • You can start a Compaq Presario CQ62 215DX from a USB

    I found this cool new Linux Destro which is really useful only as a live usb. I did the live usb and went into the bios. I priority all USB devices in the name above the HD and I tried the USB in all slots, but nothing helped. Anyone know if it is possible to start this high laboratory from a usb key. Thank you for your help and your time.

    Unetbootin can be tricky. The first BackTrack USB thumbdrive, I've done has not worked. I tried a different version of Unetbootin and it worked.
    What version did you use?

    Unetbootin-Windows-563 worked for me with a Windows 7 64-bit OS.

  • Satellite A350D-113 - where can I download the older BIOS

    Any person, where can I download older version of BIOS for my satellite a350d?
    Here in dl driver toshiba there is only this "updated" version, but I need the original.

    Hello

    You won't find any older version of BIOS for this Toshiba laptop.
    You can always download the latest version of the BIOS from the page of the European driver Toshiba

    Perhaps the Toshiba ASP might help you guys should have access to older versions of BIOS

    Get in touch with local ASP and apply for assistance

  • I can't start with Satellite P10 by pressing the power button more

    I can't start my Satellite P10 by pressing the power button more.
    Sometimes, very rarely its starts when I hold the power button for a while say 10 seconds.

    I tested the power supply and a battery to my friends P10 (of the same type) and both work very well.

    So it must be a problem with the key.
    No idea what to do?

    Thanks for any help

    The best.

    Tobias

    If it s a button or a power supply electronic problem, then you can't do anything.
    In this case assistance by the technicians of laptop would be necessary.

    But the next time that you should try this option if the laptop turns on not;
    Remove the battery and unplug the AC adapter from the laptop for about 30 min.

    After this short period of time to reconnect the two parts and check if the laptop could start.

    Good luck

  • Satellite, L9W Click-Mini-B does not start from the USB flash key

    I have a mini click L9W - B.

    * What I'm trying to boot from a bootable USB key.

    I tried different sizes (1 GB to 32 GB), different manufacturers (without name and brand) different systems (for example. Linux distributions, rescue, antivirus, Acronis Rescue sticks), EFI sticks and non - EFI.
    All USB keys to start correctly on my computer desktop and even with my other laptop.

    * The Mini Windows 8.1 updated, the current version 1.70, in the BIOS BIOS are Secure Boot and TPM , which I've also tried a variety of combinations. The stick will be recognized in the start menu, the name of the USB device is displayed.
    I click on "USB", the Mini restarts, the reader is addressed (the LED flashes at the stick) is launched but not USB, but even once the HDD / SSD.

    If Windows starts, the key works fine. It matters little that, two USB ports, I use, or if the docking station is connected or not.
    If I restart Windows - settings - settings of PC - update / restore - restore - Enhanced start - use a device - try EFI USB Device, which is exactly the same thing happened.
    who can help?

    I hope that there are German support. -Hopefully, there are German-language support.
    If this isn't the case, please contact me.

    Message has been translated

    I don't know what is the problem here, but it turns out that it is certainly possible to boot from the memory stick bootable USB flash.

    Many users have been abele to boot from the memory stick USB external flash, but it is necessary to disable the secure in the BIOS boot option.
    Also if you want to install an unsupported UEFI system, the boot mode must be changed of UEFI in the CSM.

    by the way: it's English language community

  • Satellite Pro U400 - can I boot from a USB?

    I am wanting to partition the disk and I don't have a blank CD at hand...

    Surprised to discover, there is no option the BIOS to boot from devices USB 2.40.

    Please can someone confirm for me that this is not possible?

    Thank you.

    L.

    Yes, you can boot from USB FDD, primary HARD disk, optical device and network (LAN)
    Unfortunately, the USB is not supported ;(

    But if you want to create a new partition on the HARD drive you don't need to boot from a USB n.
    Are you using the Vista on your Satellite Pro U400?

    If so, you can use the Vista Disk Manager to create a new partition.
    To reduce the first partition first and then you can create a new partition using a new space on the HARD drive.

    Concerning

  • Where can I find drivers for Satellite A350D - 20G

    Hello!

    Where can I find drivers for my laptop, because it is not in the site?
    I install Windows 7 and I don't shortcut key, download driver for model A350D-20F.

    Help please.

    Hello

    > Where to find drivers for my laptop, because it is not in the site?
    The Win 7 drivers are placed on the European driver Toshiba page.
    Satellite A350D - 20G belongs to PSALME series look at the stickers at the bottom of the unit

    PS: Keys FN needs VAP (value added package) and the Flash Utility card support!
    You can choose these tools distributed for other portable devices such as L500 series.

  • Satellite A350D-20F - where can I find the first BIOS?

    Hello.

    Anyone know where to find the original BIOS for Toshiba Satellite A350D-20f and I don't mean version 1.5 Toshiba support page?

    Hello

    The first version of BIOS and all the old versions are no longer available. You can download the latest version on the Toshiba page.

    Usually new versions of BIOS solve problems then it of not possible to go back to the old version.
    Why do you want to go down there?

    Welcome them

  • Can I start 10.7.5 from USB

    My mac pro book's fault if I need to run 10.7.5 on my mini from a USB key until its fixed. I have a bootable copy on this drive and can be seen in the menu "select boot disk". However, after selection and restarting, I always get 10.5.8 internal my drive. I don't want to upgrade my mini because of compatibility with old software. My mini has 1 GB of ram and a intel dual core, is at less than 6 years.

    A Core Duo Mac Mini can boot from an external USB drive.

    Problem is that 10.6.8 is the highest OS X that your Core Duo can start or be upgraded to.

  • PhotoGallery asks for a CD, that I didn't when I open a session or perform a task. When I cancel, I get the error code 1706. How can I stop this program from trying to start?

    PhotoGallery asks for a CD, that I didn't when I open a session or perform a task. When I cancel, I get the error code 1706. How can I stop this program from trying to start?

    Hello Mark.Mac,

    Thank you for your message.  Click HERE to run the Windows Installer Cleanup utility.  Once you have run the utility of your computer restarts and the functionality test.  You can also watch in download/install Windows Live Photo Gallery HERE.  Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Why not work apps strategy LP and letter with IOS 9.3.2 Cheats?

    The scanner in various applications, attempt at analysis screenprints on my IPad 2 Air stopped working in IOS 9.3.2

  • Qosmio + hauppauge dec 3000 s or other digital receiver!

    Can I connect the decoder hauppauge dec 3000 s to a qosmio to register film digital and audio digital? the connection can create a bit of conflict the tv tuner?Someone has connected to a decoder digital (such as hauppauge or xtreme) to the qosmio and

  • Satellite L855 - 12N - keyboard problem after upgrade to Windows 10

    Greetings friends,the problem goes like this: I have a TOSHIBA satellite, L855-12N, Series notebook. After updrading to win 10, some of my keys (a, n, enter) did not work initially.If I wait for awhile, they start work later.I find that I continue to

  • Electrify: Adobe Flash Player 10.2

    I have problems with the Flash Player 11 upgrade market. I contacted Adobe and we discovered that there is an OS/firmware issue with the device. Everyone knows these issues?

  • C in XCODE build problems with VISAS / NOR

    Hello I'm developing a C program to connect with my oscilloscope Tektronix. I inherited this project from a friend (who is currently in the secret), so I can't talk to him on this subject. On my system: I'm running OS X 10.8.4, development in XCODE 4