Data store said in warning but cannot see what is wrong

Similar Questions

• Have Win 7, but cannot see what others can on their Win 7 PC.

  Cold installation that worries me.  I have no program illeagal, but however less, I fear I've lost something, which cannot yet identify.

  I have pictures on 2 websites and I seem to be the only person who can't see the images.  Happen them to be transferred by the person of his MAC, but I do not understand why it would affect onlyh me.

  Thoughts?  (Windows 7 SP 1)

  Hi Karenkee,
  First of all, I went to this page and see everything very well.
  Exactly what are the error messages you get from your browser?
  Was there nothing added/removed before this happened?
  b Eddie

• External hard drive is recognized but cannot see the content

  My external hard drive PX1393E - 2 32 is identified as removable media, if I connect it with my laptop. But there is no possibility of access. Size is shown as '0' and you can't see the content.

  I work with Windows Vista Home Premium SP 1. I tried to use the hard drive with a second computer (also Vista): same problem. If I connect the hard drive with a laptop that works with XP, I can see and use all my data.

  Drivers and the operating system are the last level.

  Does anyone know a solution?

  (I ask forgiveness because of my bad English.)

  Hello

  You can see the size of the HARD disk in disk management?

  Normally the external HARD drive should also work on Vista if it works properly on your XP computer.
  You use different cables? Maybe you should try other on Vista laptop.

  In addition, I would recommend formatting the HARD drive again. It's maybe something s wrong with the structure of the partition.

• CD/RW drive plays CD and play files of data on CD and DVD but cannot write or save any media.

  My CD/RW drive cannot write, but it plays CD, what I can do to solve the problem?

  Hi elize123,

  1. don't you make changes before the show?

  Try these steps and check the result.
  Step 1: Start the IMAPI CD-Burning COM Service and check the result.
  a. Click Start, click Run, type services.msc and click ok.
  b. in the list of services, double-click IMAPI CD-Burning COM Service.
  c. change the startup type to automatic, and then click Start.
  d. click on apply and then click ok.
  e. restart the computer and check if the problem persists.

  Step 2: Check the registry entries.
  a. see the CD-R or CD-RW drive is not recognized as a recordable device
  b. follow the steps in the article, and then restart the computer.
  c. check to see if the problem persists.

  Important: Modifying the registry incorrectly or remove will cause serious damage to the computer. It is recommended to back up the registry before you edit it.
  See How to back up and restore the registry in Windows

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can connect via the VPN, but cannot see the files

  I can connect via VPN to my company network, but the files do not arise under Vista. I have no problem to see them on my old Windows PC, so this is a specific problem of Vista. On my old system, just click on computer and it shows me my company on the network's records. No Vista - cannot find anywhere, even if I am connected via VPN. Where are they?

  Hello

  Since it is the network of the company, there is no way to know hwo security is configured, unless you are a computer scientist in society.

  Not "mess up" your computer, first talking to the person in charge of VPN connections.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Exporting data, export to the file but cannot save

  Hi all,
  
  I have a user goes into basic shapes, exports data to form itself. Gets the exported data, but not the dialog to save the file or open it.
  
  As a matter of fact when the exporter stands... a browser window opens, then disappears within 1-2 seconds.
  
  But if you press the 'Ctrl' key continuous export and we get the file save or open the box.
  
  Originally, what is this place?
  
  
  
  Not tried.
  
  I thought that this problem has been awarded for pop up blocker. But the pop blocker has been disabled by using Internet Explorer.
  
  Other steps to study?
  
  Any help would be greatly appreciated.

  Please see the following threads:

  Export option in menu Apps does not work under Windows-XP OS
  Export option in menu Apps does not work under Windows-XP OS

  Export form data to Excel the FILE using file > EXPORT
  Re: Export form data to Excel file > EXPORT

  Export of data
  Exporting data...

• PC can ping but cannot see themselves in my network places

  I have a network with several client computers running Windows XP with a network disk server. They could see themselves in my network places and access to shared content until we changed Internet provider. Since this moment PC is not mutually exclusive in My Network places.

  I have searched for the solution, including Microsoft Answers and tried many solutions for this or similar problem but have failed in this case.

  That's what I've tried so far.

  I checked the properties of the network adapter and the following features are enabled: Client for Microsoft Networks, file sharing and print.

  All PCs have the Windows Firewall and 'File and Print sharing' is in expectations, which means that the ports 135 139 are open and in addition, it means that the computer browser service is activated automatically.

  I tried the two NetBIOS Over TCP/IP and the default options (settings use NetBIOS on the DHCP server).

  On the PC, there are shared content with read and write permissions.

  It implies that all PCs are in the same workgroup.

  What should I do next to get that this corrected? Or what should review again?

  Thank you in advance.

  I have just one more question. Why is it important to have ports 137-139 are open on the router if it is a local traffic (Layer 2)?

  That is a good question.  Everything worked fine until the router has been changed, you are not double natting and all machines are getting the router DHCP addresses (no static address on any of the workstations) so we can pretty much eliminate the errors of subnetting or navigation on subnets as a possible cause.  The only thing that has changed is the router, nothing has changed on the desktop, so I can't believe that the router is blocking NetBIOS local, I don't know where the problem would be a lie.  If you still have the old router connect machines in it and see if things are working properly.  But you're right, you wouldn't open the NetBIOS ports to the external network, I just think that something in the router is blocking NetBIOS.

  With regard to the Master Browser, General guidelines:

  • Make sure that all the machines are on the same subnet and same (correct) subnet mask.  NetBIOS can navigate across subnets without additional hardware or without a WINS server.  If all the machines are on the same subnet, but if the subnet mask is not properly configured the master browser may not work correctly.   These steps here are not usually a problem when all the machines are configured to obtain their IP addresses automatically and you have a router handling DHCP, if you assign static addresses do not neglect this important notice.
  • Select which machine will act as a preferred master browser and who can act as potential explorers, ensure that any machine not chosen to act as one of the above does not participate in the elections "browser."  Assigns the functions of master browser favorite to a machine that is always and usually always on, functions of "Potential Browser", a machine which is also usually under tension, a machine that can take charge if the favorite computer is not enabled.  DISABLE the master browser on all other machines, a machine is rarely turned on is a bad candidate for duties of master browser and can just cause of 'browser war '.

  Disabling the computer browser service will indeed prevent a machine to participate in the elections of browser and become a master browser, but the proper way to disable the master browser is by defining the IsDomainMaster 'False' value and the MaintainServerList value to 'No' to the key HKLM\SYSTEM\CurrentControlSet\services\Browser\Parameters.

  On the preferred Master browser set the IsDomainMaster value 'True' and the 'Yes' MaintainServerList to.  On the potential browser set the IsDomainMaster 'False' value and worth MaintainServerList on 'Auto '.  Unless the computer is configured as the preferred master browser, the value of the IsDomainMaster entry still has the value False or No .

  But then, everything worked fine before the change in router, it stopped working after the new router was introduced into the network, so I don't see how the master browser settings have changed, everything seems to be pointing the router again.  Have you looked at the event journal relevant errors?

  I think that the ISP routers are fine for limited use, but otherwise I don't really like the networks handling small office/work, I always prefer to have ones own router and placing the ISP router mode bridge, this way he usually is the least disruption possible to the network job when dealing with questions of the ISP.

  John

• Photos is no longer visible in the library Module, but cannot see/work on them in the develop module.

  It began in LR5 and continues now that I upgraded to Lightroom CC 2015. In the library, I do not show all of the photos even if file names are there. The photo area is grayed out. I can see the image in the develop module. It started when I imported some JPEG files, but now it's this way for all the photos. Any ideas on how to solve this problem?

  I restarted the MacBookPro OS X 10.10.3, optimized catalog and no change.

  Thank you

  David

  Were you able to get it repaired with Adobe technology? Normally the removal

  Previews should take care of this problem, except when the catalog

  itself also has a few problems. If you launch Lightroom while you keep the

  option key, you get a dialog box where you can choose to test the integrity of

  your catalog file itself.

  Saturday, May 9, 2015 at 16:34, aubreym29054076, [email protected]>

• Flash Player download, but cannot see the content.

  I tried to install Flash Player for three days. I went through every step of the support that has been listed and I still don't see any content. Started with installation, did not work. then uninstall and reinstall didn't work. Upgrade browser, did not. The settings for Internet Explorer, has failed. Checked the Admin Access, did not work. Search the registry (described in support for adobe), nothing wrong. I also have Norton Internet Utilities and I went in the settings of the firewall and allowed all the active x and flash content, still nothing.
  
  Please, please, please, help!

  SubInACL has worked very well, but you must follow through with all the steps that Darren makes sure that you do not run the fix without going through the conditions. Kudos to Adobe for taking the time to call from CA to PA and solving a problem of Microsoft! If several pages of support companies were like that, there will be many more happy users. Listen to what Darren has to say, he knows what he's talking about. Well well, once again, thanks to Adobe and flash happy design!

• Got the Trojan.Zbot before the antivirus kicks. All previous emails show they are there but cannot see the content. They can be restored?

  All old emails show they are there, but there is no content when you try to open them.

  right click on the folder, select Properties, and then on the button repair. A new index will be generated which can fix the issue or do the empty emails disappear because they are no longer available to be indexed.

  BTW look in your anti virus program for files quarantined with names like Inbox

• I rented a movie from iTunes on my computer, but cannot see on Apple TV

  I have Apple TV, the most recent version. I was doing a search for a movie on the computer, I found that I could rent it on Apple's iTunes. So I rented it on the computer, and it downloaded on the computer, I'm assuming that in iTunes under "rented". I went to my Apple TV to see it, thinking that it is now classified as a rental on my account. No luck. I see no way to make it visible on my Apple TV. Can someone tell me please how to access my Apple TV rental?

  Thank you

  Michael

  You must use home sharing (and access to the title of the app to computers) or AirPlay for broadcast on the ATV. It's not a purchase, it is not available in the cloud.

• Media Player plays but cannot see the video. How can I solve this problem?

  Audio is fine, but there is no video.

  Install this

  http://www.filehippo.com/download_klite_codec_pack/

• The key and the shortcuts work but cannot see the display on the monitor

  the function keys

  As soon as you turn on press F8 repeatadly, eventually the safe mode options menu should appear, select Security with networking, it doesn't then continue successfully (ie the screen visible)?

  This problem occurred after you update or install something? If so, disconnect any connected device and see if you can use the system restore for a period prior to the problem.

• I downloaded 2 cards of my cameras in the same folder in LR 4 but cannot see the photos to a map

  The subject says it all.

  When Lightroom has completed the import process, is to show that images of this previous import. In the library module, colonne column left, open the 'Files' section and select the folder you imported to. Then you should see all of the images that were imported.

• I imported Favorites to internet explorer, but cannot see that little first bookmarks in the list of Internet Explorer that does not scroll down.

  Firefox v 15.0.1

  Problem solved - thanks!