Date of Condition does not, not cming point value.

Similar Questions

• Case in SQL condition does not return the values as expected

  Hello gurus of PL/SQL,.
  
  SELECT amd.brkr_nm, amd.brkr_sym, AMD.MINORITY_FLG, atdf.comm_brkr_dim_key, atdf.exec_brkr_dim_key,
  WHEN atdf.COMM_BRKR_DIM_KEY = AMD.ACCESS_METHOD_DIM_KEY - CASE THEN
  WHEN AMD BOX. MINORITY_FLG = 'Y' THEN
  CASE WHEN atdf.EXEC_BRKR_DIM_KEY = atdf.COMM_BRKR_DIM_KEY THEN 'Done' ELSE 'InDirected.
  END
  ANOTHER "NA".
  END
  ELSE ' 0'
  END
  AS Direction_Method
  Of
  alloc_tran_det_fact atdf,
  ACCESS_METHOD_DIM AMD
  
  But it returns me the 0 value in the Direction_Method field. But when I checked the values in DB then my first condition (atdf.COMM_BRKR_DIM_KEY = AMD.ACCESS_METHOD_DIM_KEY)
  second condition (AMD. MINORITY_FLG = 'Y') and third (atdf.EXEC_BRKR_DIM_KEY = atdf.COMM_BRKR_DIM_KEY) condition of all them have passed, then it should show the value as indicated, but it is shwoing the '0' value only in the Direction_Method column.
  
  Kindly help me.. .am I missing something?
  I use Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production. I can't create the test data in the database, I did not have the required privileges to make :(
  
  Kindly help me, thnanks in advance for your time and your comments
  
  Published by: user555994 on May 24, 2012 02:00

  could be a space or case (upper or lower case). Try:

  /* Formatted on 2012/05/24 16:00 (Formatter Plus v4.8.8) */
  SELECT amd.brkr_nm, amd.brkr_sym, amd.minority_flg, atdf.comm_brkr_dim_key, atdf.exec_brkr_dim_key,
         CASE
           WHEN trim(upper(atdf.comm_brkr_dim_key)) = trim(upper(amd.access_method_dim_key))
             THEN CASE
                   WHEN trim(upper(amd.minority_flg)) = 'Y'
                     THEN CASE
                           WHEN trim(upper(atdf.exec_brkr_dim_key)) = trim(upper(atdf.comm_brkr_dim_key))
                             THEN 'Directed'
                           ELSE 'InDirected'
                         END
                   ELSE 'NA'
                 END
           ELSE '0'
         END AS direction_method
    FROM alloc_tran_det_fact atdf, access_method_dim amd
  

• The date and time does not work.

  I have an iphone 5 c.

  The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

  Even after trying to change it manually, time slows down or stops.

  Everyone has problems with their date and time?

  • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
  • Restore factory settings (no backup)
  • Make an appointment at your local Apple store to have it checked.

• Vista Data Execution Prevention does not let me play tractor simulator 2013

  Vista Data Execution Prevention does not let me play tractor simulator 2013

  Moved from feedback

  Hi, Tractor1o1,

  If you choose to protect all programs, you can always turn off DEP for individual programs. If you think that a program does not run correctly when DEP is enabled, check for a compatible version of the DEP program or an update from the software publisher before you change your DEP settings.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings

  Please do not duplicate messages.  It is a violation of the Code of conduct.  See the article "Please Don't ':

  "Post questions that are identical or similar to the questions you have already posted. When someone has an answer to your question, that person will respond. »

  http://answers.Microsoft.com/en-us/page/FAQ#faqCodeConduct

  Thank you.

• When I try to burn a music disc player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source

  I have computer aGateway running Vista Home Edition and something happened with WIndows Media Player.   I have the DVD/RW internal drive and external DVD/RW as a player.  I use them mainly to copy music files and it has always worked fine until yesterday.

  When I try to burn a music disc, the player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source (such as the CD or car drive).  Worked fine Saturday and had burned discs Saturday night recognizes the two drives as data drives.

  Is it something that needs to be reset or changed?

  In WMP, please click the button burn up and make sure that the Audio CD is selected. Then try burning the CD again, they now play on a standalone CD player too.

• ODI-15005: data type "varchar" does not close in technology: file?

  Hello

  I created the interface that loads data from flat file (source) oracle (target).

  For this, I took LKM SQL FOR SQL and SQL TO ADD FILE IKM.

  Please check the source and target data types.

  

  When I am executing this interface, I get the error as

  ODI-15005: data type "varchar" does not close in technology: file.

  
  

  To resolve this error, I changed the types of flat file data.

  I went to the Manager of topology-> select technology of files-> data types: string - > orcle to the number data type.

  Even if I do not correct this error. Please help me.

  
  

  Thanks in advance,

  A.Kavya.
  

  Hello

  Can you please check what are the data types for the columns in your data target store. As you say it's a file, can you check if the data type for the two columns has the String value (and not varchar).

  Thank you

  Ajay

• Data Recovery Advisor does not work

  In our environment of RAC DB 12 c Data Recovery Advisor does not work? Why?

  The Data Recovery Advisor is only supported by ORACLE DB Single Instance!

  https://docs.Oracle.com/CD/E60665_01/db121/BRADV/rcmrepai.htm#BRADV246

• Export model data as xml does not work

  Export model data as xml does not work

  Please advice on this subject? I created a template with editable regions - index.dwt, but when I try to export the model as xml - it is greyed out. I read another thread in this forum, but I'm not clear on the second stage of the given statement. Please click on the header to see step 2 on a previous thread.

  Please notify.

  THX

  Now that you have a template file, you can create a page by using the template file. Have a look here http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7ef da.html.

  Once you have created the page, you can export as XML.

  GRAMPS

• Possible error with module GWT.xml file. The value of time compilation agent user (ie6) does not match the value of user.agent (ie8) run time

  Hi there... How can I sort this problem as this message looks back constantly on google Account... ERROR POSSIBLE WITH GWT. The value of time compilation agent MODULE XML FILE user (ie6) does not match the value of user.agent (ie8) run time

  Hello nEve Adam,.

  Thanks for the return of the response.  Below, I've added some links Google support on this issue.  I hope this helps.

  ERROR: Problem Possible with your *. GWT.XML file module. The value of compile time user.agent (opera) does not match

  http://www.Google.com/support/forum/p/blogger/thread?TID=2d6d9bd1326a07c4&hl=en

  In addition,

  Message from Web page

  http://social.technet.Microsoft.com/forums/en-us/ieitprocurrentver/thread/53194559-306a-4ffc-a614-4bac817f178d

• APEX_ITEMS does not store the value in the SESSION after the validation error

  Hello
  
  I'm build dynamically using APEX_ITEMS, but it does not keep the value when the page is submitted and the validation error occurs. Here are the following steps that I am following.
  
  When I enter SUE (more than 8 characters), SUBMIT, validation fails and the error is displayed on the page (which is fine)
  BUT it does not keep SUE value (which I got) and filled with the old value which is ABC.
  
  WHY it does not keep the value that the user entered (even as the normal Page items)
  
  Region PL\SQL

  declare
    v_value varchar2(20);
  begin
    v_value := 'ABC'; 
    htp.p(apex_item.text(7,v_value));
  end;

  Validation (function returning the error text)

  DECLARE
   v_count number;
   v_value varchar2(50);
   v_value1 number;
  BEGIN
    v_value := apex_application.g_f07(1);
    select length(v_value) into v_value1 from dual;
  
        if v_value1 > 8 then
            return 'Field must have less than 9 character';
        ELSE
           return null;
        END IF;
  END;

  You use collections if you want the State to show if, after a validation error. Unfortunately, this is the case if you do not use the normal tabular forms.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  https://Apex.Oracle.com/pls/Apex/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• The value entered does not match the value in the field

  I have a simple form on the page, a field callculates a percentage based on the values entered in 2 other fields, works very well, but then all the entries on the form generates this message "the entered value does not match the value in the field".

  Also, you can remove a tab stop of the fields?

  Just happened again.

• Drop-down list does not appear selected value

  Hello
  
  I have a problem. The output of a query results page. There are 2 fields must be updated: scholarshipID and amount. I want to update my request at a time. My dynamic drop-down list does not appear selected value. The value is there, but it does not recognize in the drop-down list. I could not find the error. My code is below, so please help...
  
  < name cfquery = "getStudentsData" datasource = "#application. DSN #">"
  Select StudentID, fname, lname, GPA, Tbl_Students.ID, ScholarshipID, rise, Tbl_StudentsScholar.ID as the SSID, AwardStatus
  of Tbl_Students, Tbl_ApplyYear, Tbl_EduBckgrnd, Tbl_StudentsScholar
  where Tbl_Students.ApplyYr = Tbl_ApplyYear.id
  and Tbl_Students.id = Tbl_EduBckgrnd.SID
  and Tbl_Students.ID = Tbl_StudentsScholar.SID
  and ApplyYear = 1
  and steps = 7
  order by studentid
  < / cfquery >
  
  < name cfquery = "getScholarship" datasource = "#application. DSN #">"
  Select AcctNum, scholarship, Tbl_Scholarships.id, Code
  of Tbl_Scholarships, Tbl_DistCode
  where Tbl_Scholarships.DistCode = Tbl_DistCode.id
  AcctNum order
  < / cfquery >
  
  < cfparam name = 'X' default '0' = >
  < cfparam name = default "CounterX" = "0" >
  
  <!--get scholarship-->
  
  < cfif getStudentsDataRet.RecordCount eq 0 >
  < class p 'paragraph' = > No Records Found < /p >
  < class p = "pageheight" > < / p >
  < class p = "pageheight" > < / p >
  < cfelse >
  
  
  < class p = "submitmessage" > records found - < cfoutput > #getStudentsDataRet.Recordcount # < / cfoutput > < / p >
  < table width = "98%" border = "1" cellpadding = "3" cellspacing = "0" style = "" border-collapse: collapse "bordercolor ="#000000"align ="center">"
  < class tr = "steptext2" bgcolor = "#999999" align = "center" >
  < td width = "10%" > Student ID < table >
  < td width = "9%" > name < table >
  < td width = "9%" > name < table >
  < td width = "5%" > GPA Cum < table >
  < td width = "5%" > account # < table >
  < td width = "5%" > < table > amount
  < td width = "20%" > account # | Dist Code | Scholarship name < table >
  < /tr >
  
  < do action = "updateAward.cfm" method = "post" name = "AwardForm" > "
  < cfoutput query = "getStudentsDataRet" >
  < cfif eq x 0 and x neq getStudentsDataRet.recordcount >
  < cfset x = 1 >
  < cfelseif x neq (getStudentsDataRet.recordcount + 1) >
  < cfset x = x + 1 >
  < / cfif >
  < class = "paragraph" tr >
  < td > #StudentID # < table >
  < td > #lname # < table >
  < td > #fname # < table >
  < td > #GPA # < table >
  
  
  < cfif AwardStatus eq 2 >
  < name cfquery = "getStudentsScholar" datasource = "#application. DSN #">"
  Select Code, Tbl_Scholarships.id, AcctNum, scholarships
  of Tbl_Scholarships, Tbl_DistCode
  where Tbl_Scholarships.DistCode = Tbl_DistCode.id
  and Tbl_Scholarships.ID = #getStudentsDataRet.ScholarshipID #.
  < / cfquery >
  < / cfif >
  < td >
  < select name = "" scholarshipID_ #X # "onChange =" showMessage_ #X #(this.options[this.selectedIndex].value) ">"
  < option value = "" > < / option >
  < cfloop query = "getScholarshipRet" >
  < option value = "" #id # "selected < cfif getStudentsDataRet.ScholarshipID eq id > < / cfif > > #AcctNum # < / option >"
  < / cfloop >
  < / select >
  < table >
  < td > < input name = "" amount_ #X # "type ="text"size ="5"< cfif amount gt 0 > value = ' #NumberFormat (amount, 99.99) # ' < / cfif > / > < table >"
  < td > < cfif AwardStatus eq 2 > #getStudentsScholar.AcctNum # | #getStudentsScholar.Code # | #getStudentsScholar.Scholarship # | #getStudentsDataRet.ScholarshipID # < / cfif > < table >
  "< input name =" "IndexID_ #x #" type = "hidden" value = "#SSID #" / >
  < /tr >
  < / cfoutput >
  < cfoutput > < input name = "CounterX" type = "hidden" value = "" #getStudentsDataRet.RecordCount # "/ > < / cfoutput >"
  < b >
  < td align = "center" colspan = "11" height = "50" valign = "middle" > < input name = "Submit" type = "submit" value = "Submit" / > < table >
  < /tr >
  < / make >
  < /table >
  < / cfif >
  

  the syntax is: getStudentsDataRet.ScholarshipID [1]

  where '1' is the line number to specify

• SUMIFS numbers for two conditions does not

  I'm trying to calculate totals based on the months using a SUMIFS, and I can't for the life of understand me

  I have income coming and based on it called the category and the date of receipt, I want to calculate totals for a given month.  Here is my table and some test values

  

  But this formula does not work to calculate revenues for January

  

  

  If I do the only condition for "Trade Mission", the formula works, but when I add the second condition to test if a date month January it does not work.  Help, please

  I don't think you can use the "MONTHS (Q1 Ledger::B2:B47).

  you will need to make the values in B2 thru B47 be month values 1-12

• Automatically set to the Date and time does not

  Date and time settings on my iPad Air set them automatically does not work? When I turn it out it will allow me to choose a city (Knoxville).

  When I turn it on with (location settings) it just turns and turns?

  Any ideas?

  Hello and welcome to Apple Support communities,

  This problem may be caused by a number of things, most often the cause is the device not being able to contact the time server. Here are the instructions from Apple supported for this problem, as well as a link to the appropriate article.

  Follow these steps, after each step:

  1. Make sure you have the latest version of iOS.
  2. Automatically turn on set in settings > general > Date & time. This will automatically put your date and time based on your time zone.
  3. Make sure that your time zone is set correctly. Tap Settings > general > Date & time > time zone.

  If you still have any questions affecting your date, time, or time zone, you can automatically disable in the settings > general > Date & time and manually set the time and time zone. Or contact your carrier.

  The option to enable the value automatically may not be available in all countries or all shells.

  If the time on your iOS device does not go after a sync with your computer, the computer may be time wrong. Check the time on your computer in system preferences > Date & time. You can select "Set date and time automatically."

  Support the Article HT203483

  Get help with the date and time on your iPhone, iPad and iPod touch - Apple Support

  Of course, if the time of your carrier server cannot connect the other option is to manually set the date and time until the carrier server are again available.

  Hope you helps out.

  Kind regards

  Peter.

• How can I get rid of a popup telling me I have a virus Zeus.  It locks my screen and try to "erase the history and data, etc." does not work.

  I need help with a popup that locks the screen of my iPadAir2.  Go to the setting and compensation history/data does not work.

  If you have deleted the historical data and Safari Web site, and nothing is resolved, the problem is on the wireless router. Check your router wireless for possible violations.