DBaaS Snap Clone holds 50 GB on ZFSSA

Similar Questions

• ODI upgrade questions

  I do an upgrade of ODI 10 to 11, but had few questions

  I intend in this way please let me know if I missed something or suggest me if you have a better way

  (1) save the master and working repository (just by exporting to a location)

  (2) copy all databases that are associated with ODI.

  And by following this link

  Data Integrator Oracle 11 g - upgrade to 10g - part 4 / 11g - ODIExperts.com

  (3) I need to the same process for all environments such as DEV, QC and PROD?

  (4) and other than upgrade repositories should I upgrade update level instance as intermediary if so what is the reason?

  Please suggest me...

  Thanks in advance.

  Hi, you are welcome

  (1) actually clone means ask a DBA to clone the entire schema, which means that all the tables and the data inside. For example, let's say the name of the schema that you use for the ODI repository is ODI_MASTERREP, if you ask the DBA to be cloned, he can create another scheme called ODI_MASTERREP_BKP in the database with all the data and the objects of the ODI_MASTERREP schema. It's good because if anything happens is faster for restore and also, if you want for some reason newspapers in the old depot with you ODI 10 you can just point to the ODI_MASTERREP_BKP and you

  (2) If you have access to create patterns, you can just do what I said above no need to include a DBA in this operation. But just for backup. Another that you don't need to create what whatsoever, just follow the document migration until the end.

  (3) you make in all envs because otherwise you will not be able to deploy a version 11 scenario in a repository of version 10, all should be consistent.

  There is no way to update the client, you must download the client in the version you want and install in the same way you did before. Same thing for the agent.

  I love this blog:

  More of life than that...: ODI Series Part 1

  and I have this kind of stuff from dev (for obvious reasons)

  www.devepm.com

• What is the best practice?  Use YES or clone of binary oracle from a server used as a build server?

  I joined a new company, and the oracle DBA resident ordered a Linux server as the build server and has installed a 11g (11.2.0.4.0) and a set of 12 c (12.2.0) binaries on it.

  I was tasked to document this cloning method for new installations of Linux binaries.

  Right now, I wonder why not just download the zip file for appropriate operating system files, copy them to the new target server, start a Windows X, run YES and then patch to the newer PSU after...

  Instead, I informed by the holder oracle DBA that the binary oracle cloning and make the config. changes, create directories, setting permissions and scp'ing things, change the oraInventory, oraInst.loc, oratab, etc... is the best way to go.

  I am not convinced.  I've never worked in a company that has had the luxury of $$ to pay licenses core processors to have an installation of the oracle binary on a server only to be used for the installation of oracle on new target servers.

  Oh, and in addition, the use of dbca is discouraged so I'm rather to clone an existing dB from another server...

  Views of the benefits and drawbacks of this approach vs. YES and dbca gui tools are highly appreciated.

  Thanks in advance...

  Install the response file, silent... WTG.

• How to uninstall El Capitan and replaces it with clone of Snow Leopard?

  I had a chance terrible execution El Capitan, including in connection with CS5. It takes (literally) 10 x more time to save a .tiff file in El Capitan, than that of Snow Leopard. I suspect much too many processes running in the background, which most is probably not necessary, but I don't know that for sure. Something is not.

  I have a clone perfect my Snow Leopard former plant and wonder if that can just be installed right on El Capitan, as when we do an update of the operating system, or do I have to erase the whole score first, then install clone?

  (I know, I'll then have browser problems, but...)

  FTR: Mac Pro (early 2009, 2.66 Ghz, single image), running OS 10.11.5

  Thank you very much

  Hi CFS88,

  Thanks for joining the communities Support from Apple. I see your message you need to restore your operating system Snow Leopard of El Capitan. I'm happy to help you!

  To install Snow Leopard on your system, you will need to use a snow leopard install DVD or disc of original installation if your Mac comes with Snow Leopard originally. Once you insert the disc, press and hold the C button it restarts and restart your Mac. This will allow you to boot from the installation disc. From there, you can use disk utility to wipe your drive and reinstall OS X. Once installation is complete, you can choose your preferred option to migrate your data to your Mac using the installation wizard.

  If you use Time Machine, you can restore from a backup Time Machine with installed thus 10.6:

  macOS Sierra: return to an earlier version of Mac OS

  See you soon!

• How to clone a tab?

  How to clone a tab in Firefox 25.0.1 for Ubuntu? Can't seem to do it and there is little or no info to do so. Is a simple right-click in the opera.

  There are two possible ways to clone a tab of firefox under ubuntu:

  With the help of history:

  (1) right click on the back/forward buttons of the browser that opens to the history of the page. (You can also do the next step directly on the arrows, but if you have opened the history you can choose which page to open from history, rather than directly open the previous or the next).

  (2) press on (and continue to hold on) the CTRL and click on one of the pages of history.
  Click on one of the pages with the middle mouse button.

  (3) now, after doing one of the steps in the second point, it will open a new tab with the history of the old tab and the starting page will be the page you chose in the history.

  Wihout using history

  If you attempt to drag and drop the tab as if you were re - arrange it, keep the Ctrl key before releasing the mouse button while dragging the tab.
  This will do the same as above, except that you get to choose a place clone tab in the tab bar, and the first page of the cloned tab is the same as the original.

  Hope this has been helpful.
  Thank you.

• Disable the snap on the grid of numbers

  I have a late 2009 27 "iMac running the OS X Yosemite 10.11.3.

  I use version 3.6.1 numbers and Pages version 5.6.1

  Where can I turn off the snap on the behavior of the grid and smoothly to an object exactly where I want that he shook to the top or to the bottom of the grid?  I have not found any literature that says how to disable it.

  Any help would be appreciated.

  Thank you.

  Number, select the menu item "numbers > Preferences.

  

  Select the segment "Rulers", then uncheck all the boxes "Show Guides... »

  OR hold down the command key while dragging to temporarily turn off the guides

• Export from Palm Desktop calendar to .dba archive

  I have data for agenda 2003 to date on my Palm Desktop v6.2.  I would like to archive everything before 01/01/14 by exporting the data in an archive *.dba and then delete the data from Palm Desktop.  The export dialog says that I can choose to archive the items I selected, but does not say how to choose.  I want to select a range of dates - more precisely, 1/1/03-12/31/13.  Someone knows how to do this?

  The Export of Palm Desktop feature, you cannot selectively archive a specific range of dates of the calendar events.  There is a function of the Purge, but he will serve only to items older than a month, not a selectable date.

  One thing you could do, which requires a pocket computer, is to use an application of Pocket called Agenda 6 jointly with a freeware SD card backup utility called NVBackup for more security.  NVBackup lets you back up the entire database because there is at all times on the handheld and allows you to make backup sets so much data that your SD card will hold (max size 1 GB, regular SD card).  And agenda 6 allows you to delete data from calendar before the date.  Then...

  • Export your entire calendar on your desktop.  It would not be limited at all before 01/01/14, but it would preserve everything.
  • Buy and install DateBook 6 of www.pimlicosoftware.com (it is not freeware).
  • Download and install NVBackup.  Run NVBackup on the handheld to create a full backup on a SD card.
  • Then use Schedule 6 to remove the calendar data before 01/01/14.
  • Change the calendar (or calendar) led in Palm Desktop to handheld overrides Desktop.
  • HotSync the handheld to the desktop calendar data.  Palm Desktop calendar data should show then only events for 01/01/14 forwards, but historical data would have been preserved in the file exported as well as on the SD card and you can restore it at any time.

  I hope this helps.

• HP said I can't clone victory 8.1

  Tech tell me can I add SDS and make primary but I can't clone or retrieve OS 8.1 to new ssd dr4ive.  I need to buy 8.1 WIN to do retail.   It makes no sense to me, but I've heard two different tech supports staff.

  The DSS came with migration software so that you can clone your HARD drive?

  Please make sure that the SSD has enough space to hold all the data on the HARD drive.  If this isn't the case, you can transfer some of them on a backup disk.

  The first thing you need to do is enter the BIOS to make sure that it is set to AHCI.  This is very important because if you do this after the SSD is installed it will cause problems.  This setting allows all the special functions of the SSD is available.

  When I installed my SSD, I kept the HARD drive installed as it was when it came from the factory.  In this way he was not changed and ready for an emergency.  I used an adapter and installed the SSD drive in a 3.5 drive Bay "vacant.  Then, connected to one of the vacant SATA connectors on the motherboard.  I installed the software of migration on the HARD drive.  Once installed, you can run it.  You choose the disk HARD like the original disc and the SSD as Destination disk.  Once the disc has been cloned, I disconnected the HARD drive and started.  The SSD is started the first time.

  I don't think it would hurt anything to this give a try.  If it doesn't work, you can always purchase the full copy of 8.1 to win.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• VSM 4 snaps and vmware

  Hello. I have an environment that consists of hosts esxi 5.1, vcenter 5.5 and 4 VSM. I have a question about recovering files of catch instant equalllogic. I did it with success in cloning the snapshot and the vmdk mounted another guest vm but it seems there is a better way to do it without wasting time and space through cloning. Since I already have a component data store snap-in can't get this data bank in vcenter? It won't let me see the data store of having the same signature as the data store existing. Is there a solution for this? Also can I add the vmdk from wink to my existing guest VM without any problems? I get a warning that the guest virtual machine already has a player with the signature, and it can cause starting problems when you use the clone vmdk. Thank you.

  To recover a file, I do not use VSM recover option.   I bring the snapshot online EQL GUI.  A new analysis on a node ESXi.   Do "Add storage" and will the snapshot.   Then I use a test VM and add the VMDK this VM.   Then you can copy the files you need quickly.   I use test VM, because when you did, you have to stop the virtual machine in order to remove the VMDK of this VM.

  One of the main reasons for the VSM uses is a clone, if you book enough reserve snapshot, the snapshot might get deleted during the restore process.    The partial copy would invalidate probably your VM and the worst case, there was only one snapshot lets you down.  A clone ensures that can't happen.

  If you want to copy a VMDK together, you can do that too.  Same process as above but don't add it to a virtual computer.  Using the VI client browse to the snapshot, find the VM and the right mouse on the VMDK and make a 'copy', then you can 'stick' on the origin of the VMDK.   It is faster I think.

  Remember, make sure you have instant reserve or active Instant loan if you want to do this.

  Finally, when you are finished with the snapshot, go to EQL GUI.  Put it in offline mode.  THEN go to the VI client and rescan this node.  Configuration-> adapters for storage-> right mouse on iSCSI adapter-> Rescan.

  Kind regards

• Overview of Windows loaded on the disk hard clone

  I install the windows 10 preview on a clone of the hard drive. If some software is not working properly, what happens when I install the clone. Will be 10 updates download automatically to her windows. I have the music software, that I would not lose if updates for w10 download in the clone of windows 7. I intend to use the clone of windows 7, when I want to put into practice my instrument. Once I finished my daily practice I'll re install the drive that has the windows 10 preview. I have your opinion on this subject. I paid a lot for it and I don't know if I can recharge it. I should hold off installing the preview?

  Create a system image and a restoration, it is an option that you have:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  or

  Can I uninstall Windows 10 if I do not like it or something is wrong?

  See the following: how: go back to an earlier version of Windows from Windows 10

  Where can I get more information about the preparation of my computer safely for Windows 10 tests?

  • How to install the latest version of Windows 10
  • How to: create a Local account during out-of-box installation experience
  • How to dual boot, the latest version of Windows built with earlier versions of Windows
  • How to: build 10 tips before installing the latest version of Windows 10
  • How to configure a virtual machine using the Hyper-V technology
  • How to migrate Windows 10 Preview release: Dual Boot to install and protect the accumulated data
  • How to: Reinstall or restore your original Windows installation after reviewing previews of 10 Windows
  • How to: what to do if your currently installed version of Windows 10 expires?

  Backup your current Windows installation. Because you will make important changes on your computer, you should always back up before doing so. It is strongly recommended! See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

• CTS 1.7: Audio snap (call RTC) not heard on all sites

  After the upgrade of our endpoints of 1.6 to 1.7, we met multipoint where we added a PSTN user.

  The audio of the RTC user has not been heard at all the endpoints.

  As soon as we shared an audio presentation was OK on all sites.

  I have a nice SR with that.

  Someone else runs into the same problem?

  See you soon,.

  Martin

  Hi Martin

  BU and DALE were able to reproduce the problem.

  This is incorrect behavior:

  CSCtk61376    CFD: Endpoint MP call RTC does not sure audio component software snap-participant

  Conditions: CTS and CTMS running 1.7.0 software.  Secure Audio component software plug-in point of endpoint is added in secure multipoint call.

  Possible workarounds:

  1 - presentation-sharing is started from endpoint that has made audio snap. Or, Hold/recovery on the endpoint, which makes the audio complement will restore audio to the audio complement in all the endpoints.

  2. - do not use secure audio audio component software plug-in, if possible.

  Default is integrated in version 1.7.1

  Concerning
  Fernando

• If one already has 12 DBA OCP, so we cannot take OCA 12 DBA right? wouldn't this OCJA again go back

  If we are already 12 DBA OCP, then I heard that we are not allowed to take the OCA 12 DBA.

  Also this new certification OCJA looks like a designer certification, but this is a junior DBA certification.

  It seems that we would go back.

  Roger

  If we are already 12 DBA OCP, then I heard that we are not allowed to take the OCA 12 DBA.

  Ok.  If you were an 11g OCP (specifically an Oracle Database 11g Administrator Certified Professional) and had to take the exam 1Z0-060, then you would * also * hold the credential of administrator Certified Professional 12 c Oracle database.  You would not, however, the credentials of the Administrator Certified Associate of 12 c in Oracle database.  If you wish, you can take the exam 1Z0-062 and at that time you would hold all the three powers OCP 11g, 12g OCP and 12 c OCA.  The Oracle certification program does not prevent you to do this.  In fact, I hold all three certifications... but only because I took 1Z0-062 while it was in beta before I took the exam 1Z0-060.  I don't really see a point to come back and win the OCA 12 c, but you can if you wish.

  Also this new certification OCJA looks like a designer certification, but this is a junior DBA certification.

  OCJA certification is not part of the way s/n, so it's not really back going in this direction.  I agree that it is a certification that would normally be the target of the people who had not yet obtained their 12 c OCA, OCP.  I do not think that earn this certification in addition to the OCP 12 you would appear to be younger than you would without it.  That said, if you don't think the themes during the test are those that it would be worth your time to study - you already know or because they are the ones that you do not have and will not - use then further consideration is unnecessary.  I agree that it is a developer certification, and in fact, I have recommended a couple of days at Brandye they be moved to the section "database application development" the test of all the ads rather than the 'Oracle Database 12 c' section.

  I already started to focus on the examination in the creation of a study guide for it. In part I find interesting review because my assistant developer really needs to understand these issues better than it does currently.  I doubt that it is an isolated case. I also use in a real problem to find good sources of materials for a person to learn the information covered in this review. No manual Oracle do cover all of the content of the examination (Concepts covers a bit and the Guide SQL a bit).  I can't find good books on Amazon for people to point.

  In my opinion, it's a problem serious because a developer understand how to perform the tasks assigned to this review should be second nature. Because I can't find resources, I guess now they learn by practice or by mouth-to-a developer highest... who has probably learned by practice.  I remember some of the courses at the College, but that shouldn't be the only developers that newly hatched place can learn these skills.

• Clone tool blocks AE

  When using the tool clone in 2015 AE two things...

  (1) the video in the window of the model and the layer disappear or "blinking" and hold for a second, then disappears

  (2) the entire application freezes

  This occurs after the cloning of 10 images or so - until the AE does not resulting in a Force Quit.

  When I reopen it the project - the same thing.  Although sometimes I can even paint a picture without it freezing!

  Only since I upgraded to 2015 a few months ago.  I uninstalled and reinstalled AE 2015.

  I have the latest MacPro - 10.9.5 OSX - 32 GB of ram - graphics over-pants D700.

  Work on 1080 p 16-bit footage - Apple Pro Res codec.  I have disabled caching thinking it was a memory problem.

  I read that someone else is having exactly the same problem but on a Windows System.

  I just sent a bug report to Adobe.  Anyone else know this and have a solution?

  Heck. I was hoping that the issues you have been corrected in an update, but you are on the last already! Well, it's a good thing you have filled in a bug report. Try to work on it in 2014 CC and see if she behaves.

  As you probably know, AE CC 2015 is the first step in a major redesign of the architecture, separating the rendering engine from the user interface for the first time in the history of AE 20 + years. It is a big job and it's clearly still ongoing. It is a necessary step to improve the performance of After Effects, but it takes awhile (and versions) for them to pass through it. Thus, during this period of transition as they are the introduction of elements of the new architecture, sometimes it can be easier to use the old version to work.

  How to find and install previous Version of Adobe Apps in 2015 CC

• Where to find the IaaS __Clone_SnapshotId used on plans related clone in the vRA?

  Hi guys,.

  When you create linked clone plans IaaS that iaas will create an entity of VirtualMachineTemplateProperties with the __Clone_SnapshotId PropertyName and PropertyValue of let's say 6.

  This id is used to identify what snapshot to use for the linked clone one can be found in the database of IaaS. However: I can't say this number (6) where in vSphere.

  If the id of the snapshot in vCenter looking then it is, for example, snapshot-7380. Is there a kind of happening of mapping in vRA IaaS between vSphere snapshot ID and the ID snapshot of IaaS? How to get the instant correct ID for IaaS?

  Good so I finally tracked. It looks vRA IAAS using the id of snapshotTree for the clone-related references. If you have access to the VC:VirtualMachineSnapshot you can find the id like this:

  //snap is the provided VC:VirtualMachineSnapshot you want to use as linked clone reference
  var vm = snap.vm;
  var id = snap.id;
  function findSnap(snapTrees, snapId)
  {
    System.log("Searching SnapshotTree for id '" + snapId + "'...");
    for each(snapTree in snapTrees)
    {
    System.log("Checking snapTree '" + snapTree.id + "' with id '" + snapTree.snapshot.id + "'...");
    if(snapTree.snapshot.id == snapId)
    {
    System.log("Found matching snapshot! SnapTree id is: '" + snapTree.id + "'.")
    return snapTree.id;
    }
    else
    {
    var childSnaps = snapTree.childSnapshotList;
    if(childSnaps.length > 0)
    {
    System.log("Checking children...");
    return findSnap(childSnaps, snapId);
    }
    }
    }
    return null;
  }
  
  // Get the id like this
  var snapTreeId = findSnap(vm.snapshot.rootSnapshotList, id);
  

  Hope someone saves some time.

• How to clone of pre-production to the production database in Oracle 10g?

  I'm a newbie DBA and gave me this task to clone a primary DB environment preprodcution of Production environment. I tried Googling, but all other positions have different and confusing steps. Can someone help me get the exact steps please?

  sweetritz wrote:

  Hi EdStevens,

  I'm a newbie Oracle DBA. Yes prod server has a database running on it and I want to clone a DB of preproduction on the Prod as an extra DB server (fusion has not any data with any DB existing).

  then I would say rman DUPLICATE DATABASE is your best choice.  And it does not require the Pb of pre-production to be arrested, only that you take backups rman (Yes, online backups work as long as you have the necessary archivelog files.)