dc7800 sff windows 7 32-bit clean install - a required CD/DVD device driver is missing.

Similar Questions

• Impossible to re - install Windows Vista. "A required CD/DVD device driver is missing." appears

  I have the same problem as a previous applicant.  My hard drive went down and I had to replace it with a new one.  Windows Vista is the operating system installed on my HP Pavilion and I try to use reinstall drive.

  The message says "A required CD/DVD device driver is missing.  If you have a driver disk, CD, DVD, or USB flash drive, please insert it now. »

  I don't have a floppy drive on this machine, so I'll have to do the installation from a USB key.

  I tried so that it points to the Installation DVD, but it was still impossible to find the required driver.

  Thank you

  Sean

  Hey Thornwill

  HP machines have some problems with the replacement of their equipment with new hard disks not hp etc. and reinstall vista

  My advice to you would be that you contact hp

  Walter, the time zone traveller

• "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. »

  When I try to install window 7 ultimate my Windows vista ultimate, the spectacle of the window the following error message "a required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. "I have the"TSSTcorp CDDVDW TS - L632H ATA Device"CD/DVD-ROM drive, and and it come preinstalled with no driver disk.  So is there a solution to the problem?

  You could try to copy the contents of the DVD to a folder on your hard drive. Then start the installation from there.

  (I've seen a post or two during the upgrade to Windows 7 64 bit of Vista 32 bit). Could just be a funky DVDROM drive problem. Copy of the files should ignore the issue.

  I hope this helps!

  Mark <> Microsoft Partner

• Windows 7 cannot install from the cd/dvd-rw LG GH22NS90 player. "the CD/DVD device driver is missing" message is presented. How can I recognize the device?

  Separated from this thread.

  I have the same problem, my Windows email me the error code (19) of register incomplete or...
  I have download the drivers from the web LG.com and he send me, devide cant find.

  I try, I try and without operation = s help to respect? THX

  Hello Hendry,

  Thanks for posting your query in Microsoft Community.

  I understand that you have any questions using the CD/DVD drive in Windows 7 computer. We will certainly help you with the same.

  I would like to know some more information on this issue to help you better.

  1. Are you able to access the other CD/DVD drive in Windows?
  2. You try to install the drivers for any device?
  3. When say "Windows send me error code (19)", you get this error message in Device Manager?

  In the meantime, please follow the below suggestion to solve the problem.

  The error code 19 occurs when data in the registry for the device and its driver were damaged.

  For more information on this error, follow the link below:

  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  () Also applies to Windows 7 as well ()

  http://TechNet.Microsoft.com/en-us/library/cc772156 (v = WS.10) .aspx

  Additional information:

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about the back upward and restore the registriesry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• WINDOWS 7 32 BIT CLEAN INSTAL

  I bought 2 copies of Windows 7 Premium 32 bit to upgrade my desktop computer PC and netbook Windows XP.

  The desktop PC is in place and work just fine but unfortunately I have badly damaged the surface of the second disk that I was going to use for the netbook.

  My question is, can I use the unused COA code supplied with the disc that I've damaged and use it with the disk used to upgrade my desktop computer to upgrade my netbook or do I have to pay for another new drive?

  You can use the product key from others with the other drive which is not scratched. It will work fine.

• I installed a new hard drive on my dell 1545, I bought preimum windows 7 64 bit and install it dosent detect the hard drive

  I broke my hard drive on my dell inspiron 1545, I bought a new 1 TB WD HDD and a new operating system windows 7 preimum 64 bit. I installed it

  He dosent see the hard drive, it says re seat the drive and it's in the rite. What should I do

  The hard drive is may be defective. Take it back to the store and get his change for a good...

• When installing: lack of Cd/DVD device driver ("A required CD/DVD drive driver is missing)

  I get this on the screen of installation with the river digital iso home installation. Workaround solutions?

  Hey everybody,

  I had this problem as well and I burned another copy of the ISO and it worked fine.

  It seems that this message could be related to a bad disk, or a bad burn.

  Try to burn the ISO again, you can try to use the Microsoft Store ISO burning tool (I used, works very well) located here:

  http://store.Microsoft.com/help/ISO-tool

  If this does not work I would recommend to put the ISO on a USB key (using the same tool ISO link above) and try installing from the USB stick.

  If you don't have a usb key that is large enough, the last step to try is to re-download the ISO and burn it again, we have seen some cases where ISO wasn't the right size and has proved to be an incomplete download / corrupt ISO.

  I hope this helps.

  PLEASE LET ME KNOW IF YOU SEE SUCCESS WITH THE ABOVE STEPS!

  If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates

  Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates.  He worked for years until now.

  How to fix?

  Thank you

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/Vista-Windows-Update-does-not-work/8385103e-4117-4b0c-B21F-27a266fdf4a9

• CAN windows 7 64 bit oem installed on the computer d4650y

  CAN windows 7 64 bit oem installed on the d4650y?

  charlesq wrote:

  CAN windows 7 64 bit oem installed on the d4650y?

  Hello

  May be it can but legally cannot because when asked this question you know the DVD is is not belong to the laptop.

  Kind regards

• I can't able to install windows 7 64 bit in a GPT partition... the drive is already formatted and now I'm on win 7 installation screen

  I can't able to install windows 7 64 bit in a GPT partition... the drive is already formatted and now I'm on win 7 installation screen

  Mehdi FranklinPackya,

  If an operating system from a disk GPT, whether it is installed or not, the extended BIOS Firmware Interface (UEFI) is not only recommended his need.

  The following links may be of some use:

  Install Windows 7 on computer based UEFI

  Windows cannot be installed to this disk. The selected disk is the GPT partition style

  All the best,

  James

• Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical

  Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...

  I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.

  Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!

  This solved my problems. Good luck with yours.

• Relocation of 7 home 64 bit by usb. Windows Setup needs a driver. message reads (a required CD/DVD drive device driver is missing).

  54i have a computer laptop m18x by Mei alineware reinstall 7 home 64 bit by usb. Windows Setup needs a driver. message reads (a required CD/DVD drive device driver is missing.) funny iam not to use a cd or a dvd. IAM using a USB flash drive. weird. If anyone can help.  Thank you wberlin

  Probably the installation media itself is corrupt. If your Alienware is preinstalled with Windows 7, then you should be able to reinstall using the recovery partition:

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  To restore the image while preserving the data files:
  Turn off your computer.1.
  Disconnect all devices connected to the computer (such as USB key, 2 printer and so forth) and remove any recently added hardware in-house. NOTE: Do not unplug the AC adapter cable.
  Turn on your ordinateur.3.
  When the Alienware logo appears, press several times to access the 4. Advanced Boot Options window. NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop; then, shut down your computer and try again.
  Select 5. Repair your computer.
  Select 6. AlienRespawn and backup emergency in the System Recovery Options menu and follow the instructions on the screen. NOTE: The restore process may take an hour or more depending on the size of the data to be restored. NOTE: For more information on AlienRespawn, see article 353560 at support.Dell.com knowledge base.

  Source:

  http://support.Dell.com/support/eDOCS/systems/M18x/en/mm/MM_en.PDF

  If the recovery partition does not work:

  Step 1: Download a copy of Windows 7:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Step 2: Perform a custom installation, see Windows 7 section of the following article how to perform a custom installation:

  How to: perform a customized Windows installation

  Step 3:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• clean install of Vista on an old drive hard ide after drive failure hard sata - oem version now get "the limited functionality" due to "unauthorized changes" had no problems for 3 years until this!

  I did a clean install of vista on an old drive hard ide after the disk sata hard down - (oem version) now get "feature limited" because of the "unauthorized modification" had no problems for 3 years until this!

  Hello

  It's a shame you don't know the exact name of the virus

  Malware can cause non-genuine messages appear

  but try this:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Iso file of windows xp can directly be installed USB on a formatted hard drive?

  Iso file of windows xp can directly be installed USB on a formatted hard drive?

  Not directly.

  There is a SMALL chance that if your hardware supports it (unfortunately never say you anything on your PC or BIOS), you can boot from a USB stick or an optical drive and install Windows XP like this.
  But it is unlikely.
  In addition, tell us what you mean by 'windows xp iso file. This is very vague, and we do not know what you are talking about.
  Finally, if you want to ask questions here, really read the answers and recognize them in some way. Here is a link to your other thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/which-software-should-i-use-to-burn-Windows-XP-ISO/ffd9ccb8-0248-4e1f-afd3-6ce14802348a

• Impossible to re - install Windows 7, dvd/cdrom drive is missing.

  Original title: ireinstalling windows 7

  I reinstalled windows 7 and it says dvd/cdrom drive is missing.  and so the download stops. I can't access what any previous OS... it's the password on the screen of the owner and I do not know the password... I've been playing with it for a week now and I am at witts end.

  Hi David,

  I suggest you to create a bootable USB and re - install Windows 7 from that.

  Download Windows 7 USB/DVD tool
  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  See the article for more information.

  "A required CD/DVD drive device driver is missing" or "needs a driver your computer media is missing" is displayed when you install Windows
  http://support.Microsoft.com/kb/2755139

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.