Ddenly pix reboots

Similar Questions

• Just got a new Pixi, updated to 1.3.5 update and now I can't download apps

  Hello!

  I just bought a Pixi yesterday and downloaded a few apps (Facebook, Flixster) and everything was OK.  I noticed Facebook saying that I had to update to WebOS, so I did.

  After the installation of WebOS, I can't download apps.  I followed the palm offers fixes and none of them helped.

  I rebooted my phone a few times (both by choosing reboot and turning off and on again), put in my credit card information and checked for if sure I have a spare bedroom (say 7 GB of free...) and I can't download apps.

  I tried the free and paid apps.  Download including Pandora, enjoy Sudoku, crossword, Accuweather and GoodFood... and none of them.

  I get no error message at all.  I click on the download button, it displays "Download" and then it switches back on a Download"" button.  He will ask me if I agree the application using location services, too... but nothing will download.

  I looked through the forums and couldn't find something relevant?  It seems most of downloads problems producing some sort of error.  Here, I get nothing.  And before the 1.3.5 update, I was able to download apps very well.

  Any ideas?

  Just came across other people having this problem with the pixi. Seems to be related to the pixi only. And it was the people who had no installed 3rd party settings. This solves the problem for all who have tried so far. Run webos doctor found at the link below. Follow the directions. You must back up all files stored on the USB of the Pixi drive. Music, you took pictures, files, etc. Also, be sure to run the backup application in the Launcher to a current backup before wipe everything with the webos doctor. I would like to know if it works for you.

  http://www.Palm.com/us/support/downloads/pre/RecoveryTool/webosdoctor_dl_pixi_sprint_en.html

  Message edited by tagz on 31/12/2009 21:32

• Pixi sleep problem

  We are testing on the Pixi and I noticed a problem of sleep with the device.  Intermittently, when the screen goes to sleep and you press power once button to activate back on nothing happens.  Then if you press and hold the power button on the unit complete again.  The screen does not return until the phone is rebooted.  We have already replaced the unit once on this issue and happens with the second device.

  Any ideas on how to solve this problem would be appreciated.

  Thank you.

  Go to the Sprint store and let them know that you need to put in a spacer.  While you're there, I recommend you have them test the battery to make sure it's working properly.

• Connectivity random Cisco Pix 501

  Hello. I'm having some trouble with my CISCO PIX 501 Setup.

  A few months I started having random disconnects on my network (from inside to outside). The machines can ping the DC or the Pix, but impossible to surf the internet. The only way to make them go outside is a reboot of Pix.

  My configuration is:

  -----------

  See the ACE - pix config (config) #.
  : Saved
  : Written by enable_15 at 09:23:07.033 UTC Tuesday, June 3, 2014
  6.3 (3) version PIX
  interface ethernet0 car
  interface ethernet1 100full
  ethernet0 nameif outside security0
  nameif ethernet1 inside the security100
  activate 8Ry34retyt7RR564 encrypted password
  2fvbbfgdI.2KUOU encrypted passwd
  hostname as pix
  domain as.local
  fixup protocol dns-length maximum 512
  fixup protocol esp-ike
  fixup protocol ftp 21
  fixup protocol h323 h225 1720
  fixup protocol h323 ras 1718-1719
  fixup protocol http 80
  fixup protocol pptp 1723
  fixup protocol rsh 514
  fixup protocol rtsp 554
  fixup protocol sip 5060
  fixup protocol sip udp 5060
  fixup protocol 2000 skinny
  fixup protocol smtp 25
  fixup protocol sqlnet 1521
  fixup protocol tftp 69
  names of
  access-list acl_out permit icmp any one
  ip access list acl_out permit a whole
  access-list acl_out permit tcp any one
  Allow Access-list outside_access_in esp a whole
  outside_access_in list access permit udp any eq isakmp everything
  outside_access_in list of access permit udp any eq 1701 all
  outside_access_in list of access permit udp any eq 4500 all
  outside_access_in ip access list allow a whole
  pager lines 24
  Outside 1500 MTU
  Within 1500 MTU
  outside 10.10.10.2 IP address 255.255.255.0
  IP address inside 192.168.100.1 255.255.255.0
  alarm action IP verification of information
  alarm action attack IP audit
  history of PDM activate
  ARP timeout 14400
  Global 1 10.10.10.8 - 10.10.10.254 (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
  Access-group outside_access_in in interface outside
  access to the interface inside group acl_out
  Route outside 0.0.0.0 0.0.0.0 10.10.10.1 0
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
  Timeout, uauth 0:05:00 absolute
  GANYMEDE + Protocol Ganymede + AAA-server
  RADIUS Protocol RADIUS AAA server
  AAA-server local LOCAL Protocol
  Enable http server
  http 192.168.10.2 255.255.255.255 inside
  http 192.168.10.101 255.255.255.255 inside
  http 192.168.100.2 255.255.255.255 inside
  No snmp server location
  No snmp Server contact
  SNMP-Server Community public
  No trap to activate snmp Server
  enable floodguard
  Permitted connection ipsec sysopt
  ISAKMP nat-traversal 20
  Telnet timeout 5
  SSH 192.168.10.101 255.255.255.255 inside
  SSH timeout 60
  Console timeout 0
  dhcpd dns 8.8.8.8 8.8.4.4
  dhcpd lease 3600
  dhcpd ping_timeout 750
  dhcpd outside auto_config
  Terminal width 80
  Cryptochecksum:7f9bda5e534eaeb1328ab08a3c4d28a
  ------------

  Do you have any advice? I don't get what's wrong with my setup.

  My DC is 192.168.100.2 and the network mask is 255.255.255.0

  The network configuration is configured to set the IP of the gateway to 192.168.100.1 (i.e. the PIX 501).

  I have about 50 + peers on the internal network.

  Any help is apprecciate.

  Hello

  You have a license for 50 users +?

  After the release of - Show version

  RES

  Paul

• PIX 515 - deleting static routes

  We all have a few static routes that we change the IP addresses on. We emit static (inside, outside) order No., but seems we have to reboot the pix after the change is made so that it can use the new static IP route to the external interface. Y at - it a command that does it, so we do not have to restart the pix?

  clear xlate

• On PIX 501 6.3 intermittent Internet access (5)

  Hello

  I have a problem of access to the Internet from the local network behind a PIX 501. It worked for months, but suddenly, I discovered that Internet access is intermittent. Internet access works for about 10-15 minutes and then goes down. When I reboot the firewall or disable ARP Internet works again. I turn on debugging with 'debug arp' and I get an error message "arp-in: Dropping request outside the unsolicited nonadjacent ROUTEOUTSIDE 0002.cf69.50cf for 82.x.137.x 0000.0000.0000»

  Any ideas on what could be the problem?

  Thank you for your help.

  Kind regards.

  Hello, Couple of things to check.

  You have ICMP permitted on the external interface of the PIX. If so, can ask you someone to ping from the internet to the external IP address.

  When they ping, can you unplug the external interface and see if they receive a response in return.

  If so, then there is a problem with the access provider. They could give your IP address to another person.

  If this isn't the issue, then you open a TAC case and resolve this problem.

  See you soon,.

  Gilbert

  The rate of this post, if that helps.

• Card crypto controls lock-up PIX 525

  Does anyone know why my PIX 525 crashes when I apply my a cryptomap both command line? I first apply the following ACL. But when I try to apply the first line of cryptomap my PIX locks and I have to restart... Any help would be greatly appreciated >

  permit access ip xx.xx.0.0 255.192.0.0 list XXXXXtunnel xx.xx.18.0 255.255.255.0

  access-list allowed sheep xx.xx.0.0 xx.xx.xx.0 255.255.255.0 xx.xx.0.0 ip

  allowed to access-list acl-inner ip xx.xx.0.0 xx.xx.0.0 xx.xx.xx.0 xx.xx.xx.0

  xxx_map 157 ipsec-isakmp crypto map

  card crypto xxx_map 157 correspondence address xxx-tunnel

  card crypto xxx_map 157 counterpart set xx.4.xx.xx

  card crypto xxx_map 157 transform-set xxx_set

  Hello

  I came across this problem when there are other entries already exist under the same crypto map, and are already applied to an interface.

  I found that by denying first crypto map interface command, change the config and re - apply the interface command then it will work very well.

  So...

  (1) no xxx_map interface card crypto outside

  (2) place the lines of crypto map configuration

  (3) interface xxx_map crypto map out

  Of course, you will lose the existing tunnels if some already set up but then this happens if you reboot anyway!

  It may be useful

• Pix 501 license limits and how to say

  I sent a PIX-501-BUN-K9, which is limited to 10 users. I recently sent another PC. I can't browse the internet unless I reboot the pix. Is this an indication that I need to update the license?

  What commands can I run on the pix to check or validate that I reached the limit license?

  You can enter:

  SH ver

  or

  SH - activation key

  This will display your license that is installed on your PIX. Next to "To inside hosts", you will see how many user licenses are available. You can upgrade by purchasing a license from 10 to 50 users (PIX-501-SW-10-50 =) for about $240, or 10 to unlimited (PIX-501-SW-10-UL =) for about $370.

  To find out how many are currently in use, you can enter "sho xlate count" which will set out how current translations are used.

  Please rate if this can help.

• PIX 525 6.3 (1) worm. & static IP problems

  I have problems, change a static IP address of internal IP addresses.

  The original statement looked like this,

  static (DMZ, external) xxx.xxx.46.3 192.168.1.2 mask subnet 255.255.255.255 0 0

  When I change the external ip address to point to another internal IP address.

  static (DMZ, external) xxx.xxx.46.3 192.168.1.3 netmask 255.255.255.255 0 0

  the new address is listed, but the external IP still points to the old internal address. I can't fix the problem until I reboot the PIX.

  Is this some kind of a cache problem.

  Martin,

  You have a chance to implent the logical interface (virtual interface)?

  As you can see, 6.2 (2) pix does not support virtual interface; However, 6.3 (1) don't. To answer your question, after you have done the configuration, you must use

  clear xlate command to clear all the translations. I hope this would help you.

• PIX 515E failover recover

  I have two PIX 515E firewall v7.01 configured in a failover scenario.

  The two units were operating without problem. Primary worked very well and the configuration changes have been transferred to secondary school.

  By TAC support, the only thing needed to test the failover was to issue a command to 'reload' in the primary and the secondary, take on main. Then, "active failover" question on the once rebooted device it was up in the secondary role.

  Failover to the secondary unit worked without problem, it is a smooth transition to the secondary unit.

  The problem came in that the original primary unit is stuck in a loop when you try to reload with what looks like now configuration errors. It will not properly start upward.

  Is not a valid procedure to test the failover?

  It seems that in the real world, this could actually happen that failover should work?

  Among what is shown:

  Config ERROR: invalid journal / level keyword specified; level must be emergencies (0) - debugging (7)

  Config error - acl_in list extended access permit tcp any newspaper SMTP host 208.13.32.36 eq

  Out of config line 359, "access-list acl_in exten...". »

  Config sync error: Suite not command could be executed in standby mode

  Platform

  acl_in list access permit tcp any host 208.13.32.36 eq smtp log inactive

  Use BREAK or ESC to interrupt boot.ridge/vlan/modify flash): m

  e inactivea VLAN

  REPLICATION OF CONFIGURATION OF ACTIVE TOWARDS THE RESCUE UNIT IS INCOMPLETE,

  Reading of 115200 bytes of the image of the flash.

  TO AVOID THE EVE OF TAKING OVER AS ACTIVE WITH A PARTIAL CONFIGURATION UNIT, THE EMERGENCY UNIT WILL NOW RESTART *.

  You're not going to like this answer.

  It seems that commands typed in and abstract by cisco in the configuration are not valid when copied/pasted in or when the firewall is rebooted or receives an active firewall configuration.

  I don't know exactly what you did, but here's what I did to reproduce your problem:

  I typed in the command:

  acl_in list access permit tcp any host 208.13.32.36 eq smtp interval 300 inactive information newspaper

  Given that "interval 300 ft newspaper is the default, it is actually saved in the running-config like:"

  acl_in list access permit tcp any host 208.13.32.36 eq smtp log inactive

  It's * not * a command invalid (the word "journal" following address must be a logging level), if you try to kick it. When you restarted the firewall, he tried to shoot the active configuration of the device (because it is now pending), received this line and since he can't run it (because it is not a valid command), it keeps restarting itself so that it cannot take over and be the active firewall.

  Best way to do is to hold this line (and other lines like him) outside the firewall active now - the line is marked "inactive" in any case, this should not affect you. The other way would be to change that line to something by default (the recording level change may be easier). In this way when the primary/secondary itself restarts again, the order received will have a valid log level (or if you take the lines out, they will not be a problem) and will allow the rest of the configuration process.

  You can also report to cisco as a bug, if they are not combing these forums already.

  -Jason

  This rate if this can help.

• Delay PIX?

  Hello

  I wonder if there is a way to configure a PIX to wait 5 or 10 minutes before start once there is power going into it. A client I work with has a random breakdowns (at night) and when that happens, the firewall back upward before the cable modem is fully upward that screws the DHCP process--essentially the cable modem must be entirely first then when people come into the office in the morning, they have no internet until the firewall is rebooted. Both the firewall and the cable modem are on an inverter, but I guess that failures are longer than the life of the battery in the ups. Any ideas?

  Thank you!

  don't know if its possible to do what you want to do... But perhaps, affecting the maximum value in the retry option dhcp may solve your problem.

  IP address dhcp retry setroute 48

• PIX 515 pix704.bin pix721.bin update...

  Hello

  I was able to get to the 7.04 6.3 upgrade successfully. I loaded the version 7.21 with the boot system command and made a wr mem. When I reboot I still get up to 7.04... can someone help here?

  TIA,

  Gary

  Gary,

  For after the "show bootvar", you have the pix configured to

  1 load the code of 7.0 (4) if it is available in flash or

  2. load the code 7.2 (1) if 7.0 (4) is not available.

  You get the error message below "ERROR: unable to set this URL, it has already been set." Remove the first instance before adding this one"because the pix is already a" boot system flash: / pix721.bin "set.

  Given the question, I "think" that your configuration on the pix has the lines below. Please correct me if I'm wrong. The order of configuration lines are very important when the pix attempts and load the image.

  Flash: / pix704.bin starting system

  Flash: / pix721.bin starting system

  If the above configuration is true, then the pix will try to load first 7.0 (4) and if 7.0 (4) is not available, the pix will charge 7.2 (1)

  If you want the pix to load 7.2 (1) first, you will need to

  1. Remove "boot system flash: / pix704.bin" by not doing a "no boot system flash: / pix704.bin.

  2 then do a 'sh run"and make sure it is stated as a boot that is" boot system flash: / pix721.bin.

  3 then add the command "" boot system flash: / pix704.bin.

  4. now make a race of show and make sure that the initialization statement looks like this in your configuration. The order of statements is very important.

  Flash: / pix721.bin starting system

  Flash: / pix704.bin starting system

  5. make a "wr mem".

  6 reload the pix and the pix then try to load first 7.2 (1).

  This should solve your problem. If this isn't the case, please report the error you receive and we will try and solve the problem.

  I hope it helps.

  Kind regards

  Arul

• PIX 515E, 7.2 (1), restarts randomly several times per day

  Hello

  We have a PIX 515E race 7.2 (1) that reboots randomly. It has happened 4 times this morning and has been for several days.

  There is no significant syslog messages prior to the restart of the box. Monitoring CPU and memory usage shows nothing ununusual.

  No failover and without VPN. Pretty basic config, a flow low traffic.

  I've attached the crashinfo file - I looked through and it is meaningless to me.

  Someone at - it an idea?

  see you soon

  Chris

  The inspect esmtp is causing your ASA crashing. See: CSCse41795

  HTH pls note

• Downgrade PIX v701

  Hi, I know that is neither right, am I on v701 with 32 MB of memory, and PIX is now in a reboot loop.

  I can get to analyze mode, knowledge the downgrade from monitor mode. Or how I could get out of the loop. If I get to the command line I can downgrade

  Best regards

  RP

  Save the pix on the cisco site as if you upgrade the license to 3. (use the serial number to see the version)

  They will send you the activation key. (hope you have a cco account)

  Then use the command of activation key to enter the key.

  If you remember the old key when the pix ran 6.3 (x), you can enter it.

• Firewall PIX to connect to router - link light not on

  I'm trying to connect the PIX501 firewall to our router (router PortMaster) to test the external connection but light not on port 0.

  I used the crossover cable (also try normal cable), also to reboot the router. After the reboot, the light becomes on for a very short time (10 or 20 seconds) and then turned off and never more.

  Anyone know what happened? Any suggestions are welcome.

  See you soon

  Are the PIX or router interfaces to close? If this isn't the case, which are then they fixed on duplex speed? If it has a value of 10, the other 100, they won't come to the top.

  If they do not resolve, try another device on each port (501 and router) to check the status.