dead Bluetooth keyboard keys

Similar Questions

• Foreigners attacked 3 of my 4 yesterday (not only a problem of Bluetooth) keyboard

  Three of my Apple keyboard (A1242-2 and 1-A1314 Bluetooth stopped working at the same time, leaving a very old work M2452 (USB).

  .

  Try a pram reset, (5 times) produces no double chime, just a normal restart smoothly.

  .

  The Bluetooth keyboard is dead. I tried new batteries, using the displayed codes, but it is not even at all.  Tried 10 times. (I used a procedure that works until today to remove keyboard preferences and configuration panels, then find the keyboard... but now it does not. Exchanged all USB ports for devices (keyboard and a trackball), but it doesn't seem to be a problem USB "stall".

  .

  I trashed "com.apple.Bluetooth.plist" and rebooted w/usb alone.  Not good

  .

  I have read many workarounds for the problem of Bluetooth solutions and they usually work after trying slightly different variants. But it is troubling.

  .

  Anyone have any ideas on what happened?

  .

  Thanks a lot for some advice.

  .

  -GG

  You have another Mac or an iPad or any PC with Bluetooth, you can try with?

• Bluetooth keyboard

  When you use the Sony Bluetooth keyboard with my tablet, keying is often interrupted by the built-in keyboard of the tablet to appear on the screen. This causes the typing to stall and/or letters repeats. It seems to happen about every minute or so and the results by typing mail very uneven and entry. Anyone else notice this? How can I disable the on-screen keyboard using Bluetooth?

  Hi all
  Thank you for your messages.
  If this is your first time here, welcome to the Forums of Discussion of user.
  As Dan has said above, we tested the keyboard and are not double posting.
  We suggest you to support so a technician can help with your settings to resolve the conflict causing repetition.
  http://tablet.sel.Sony.com/1/1/SGPT111U... actSupport

• Iconia W700P - need to access bluetooth keyboard during the boot UEFI or need to boot from a USB

  Solved a problem, now face two other:

  The W700P will now boot from a DVD recovery Acronis TI, but to select the restore function (then the specific restore backup), it requires an entry for a keyboard. The Bluetooth keyboard supplied with the W700P does not work during the boot sequence. I prefer not to go out and buy a USB keyboard, but it is perhaps the only option.

  Or-

  The W700P boot from a USB key can stick? I read that this is impossible, but in looking at the Acer store, that's all they offer as recovery media for the W700P. I made a bootable USB key, when I bought the computer first, but I can't seem to start. All I get is repeated boot Acer screens, maybe he's trying different options in the boot order. I tried to change the order, put a password for boot and secure boot off, but I still have the same question.

  Any ideas?

  Solved once and for the moment! I now have a USB hub, USB, USB and DVD USB mouse keyboard (powered externally). Throw all these things on the machine, I was able to boot into the Acronis Recovery DVD, go to the menu and reinstall a previous backup of Windows 8.1.

• Can I install Win XP costs with booting from CD bluetooth keyboard? No problem installing connectivity?

  I have a bluetooth (Logitech MX 5000) keyboard and a mouse bluetooth also.

  Can I boot from the XP CD and completely install fresh XP without any keyboard / mouse of disconnection.

  I m wondering how bluetooth will work if XP is install new files?

  And I want to install by booting from the CD only?

  Maryse Agarwal

  I think that you did not understand the problem.  Some bluetooth keyboard/mouse games include

  a bluetooth adapter that is aware of this problem and start eMule a wired USB device

  until the operating system recognizes (and probably Initializes) as a bluetooth adapter.  As a result,.

  during a clean installation of Windows XP, the keyboard works in the environment of pre-seed.

  (Possibly with help from the BIOS itself that can be done "supported inherited" to do the)

  "USB keyboard" watch compatible all the way back to BACK!)

  In any case, once that installation gets pretty far along some more advanced to load drivers

  the BT adapter leaves its compatibility mode and the keyboard stops working.  Alas, it's good

  before the point where you can create connections to BT.  It's to the point where Windows

  The installation program ask you locale, time zone, a * license key * etc.

  I have not found a way around using another keyboard at this point.  Another mouse is also

  practical but not strictly necessary.  (You can do it using and .)

  Hope this clears some things up.

  -Jam

• Logitech bluetooth keyboard K480 pair with my Windows 7 computer

  * Original title: Logitech bluetooth keyboard K480

  I have a Logitech bluetooth K480 keyboard won't pair with my computer Windows 7, the devices to show but it does not work with the key board.

  Joe

  Hey Joe,

  Thanks for posting your query in Microsoft Community.

  It can happen because of the conflict of device driver if Windows update tries to install the updated driver for a device that has an updated driver.

  • What is the brand and model of your computer?

  While you reply us with the above information, you can try the following solutions and check if this solves the problem.

  Method 1: Run the corner hardware store and check if it detects problems.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2: Try to remove and then reinstall the keyboard.

  First, connect a wired keyboard or mouse to your computer. So, if you have Bluetooth wireless technology installed on your computer, follow these steps:

  a. click the Start button, select Control Panel, click hardware and soundand then click on Bluetooth

  Devices.

  b. Select the keyboard or mouse that does not work, and then click Remove.

  c. click Add, press the reset button on the bottom of the keyboard or mouse, check the box my device is set up and ready to be found and then click Next.

  d. If the apparatus does not, repeat the previous step. When the device is found, select it, and then click Next.

  e. If you have tried this step several times, and your computer still cannot find the device, check that the device has fresh batteries.

  f. If the device is a keyboard, exchange of security with the keyboard keys. If the device is a mouse, click don't use a passkey. Follow the remaining instructions in the wizard.

  See also: compatible devices with Bluetooth problems

  Hope that the information provided is useful. If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• Bluetooth mouse lag when Bluetooth keyboard is connected

  Hello

  I recently bought a Lenovo Thinkpad with windows 8, and I noticed a really annoying problem. I have a Bluetooth mouse and a bluetooth keyboard and my keyboard works fine, but when my Bluetooth keyboard is connected, my Bluetooth mouse is REALLY bad. If the keyboard is off then the mouse works great, only it messes up if the two are connected at the same time.

  I have seen several discussions on the Bluetooth mouse problems when playing games or transfer of data, but mine does all the time if I have my keyboard connected at the same time.

  Is there anything I can do to fix this?

  Troubleshooting Wireless and Bluetooth® questions Check and reset power check the (rechargeable) batteries

  Try to charge the unit. It can take an hour or more to fully charge your device. See the documentation provided with the device.

  Notes

  • The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.
  • Some rechargeable batteries may need to be replaced. For more information on batteries, see the documentation provided with the device.

  Check the batteries (non-rechargeable)

  1. Make sure that you have installed the correct type of batteries in the device. For more information on batteries, see the documentation provided with the device.
  2. Replace all batteries with new batteries.

  Note

  The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.

  Reset the power of the device

  1. If your device is equipped with a power switch, turn off the unit.
  2. If your device is equipped with removable batteries, remove the batteries and reinstall them. Make sure that they are correctly positioned.
  3. If your device is equipped with a power switch, turn on the device.

  Look for the software updates Check for Windows updates

  1. Click Start, click all programs, and then click Windows Update.
  2. Download and install the updates and priority updates custom, especially those related to the material.

  See the Readme file

  • See the Readme file for more information last minute product.

  Check the USB connection between the computer and the transceiver unplug and reconnect the transceiver.

  1. Disconnect the wireless transmitter/receiver and then plug it back.
  2. If the wireless transmitter/receiver is plugged into a USB hub, disconnect the hub, and then plug it in again.

  Plug the transceiver wireless to another port on the same computer.

  • If you have several USB ports, plug the transceiver wireless on a USB port different on the same computer.
  • If the wireless transmitter/receiver is plugged into a USB hub:
    1. Plug the hub on an another USB port on the same computer.
    2. Make sure that you use a powered hub that is appropriate for the powerful high USB devices.
    3. Try to plug the transceiver wireless directly into a USB port on the computer.

  Refresh the wireless connection all other devices connect wirelessly to Microsoft.

  1. Press the button on the wireless transmitter/receiver.
  2. Press the button connection on the underside of the unit.

  Optimize the signal check the placement of the wireless device.

  The wireless transmitter/receiver and the device must be correctly. Try the following solutions:

  • Place the device wireless closer to the wireless transmitter/receiver.
  • If you have a mouse and a keyboard, and they are both wireless, place them equidistant from the transceiver.
  • Turn the transceiver on the side or upside down.

  Some objects not wireless and wireless may cause interference with your wireless phone. To avoid interference from the transceiver, avoid using your device near objects such as:

  • Wireless network devices
  • Cell phones and wireless drill
  • Remote controlled toys
  • Microwave ovens
  • Cables parallel to the wireless transceiver cables
  • Metal surfaces in contact with the unit
  • Other transceivers and wireless pointing devices

  Setting up a Bluetooth device

  You can use the following information to help you resolve a problem with your device (keyboard or mouse) Bluetooth wireless.

  Check the connection between your computer and the transceiver Bluetooth

  • Make sure that Bluetooth is on.

    If you connect your device with an internal Bluetooth connection, make sure that wireless connections are active. Many laptops have a switch, a key or keyboard shortcut that enables wireless connections.

  • Turn on Bluetooth on your computer if your mouse does not have its own transceiver. If your mouse does not have its own transceiver, your desktop, laptop or laptop must have a two-way radio built into the computer, or you must use a non-Microsoft external transceiver. How the mouse will connect to the computer by Bluetooth, and how to turn on Bluetooth, varies depending on how it is implemented on the computer. You may need to contact the computer manufacturer or the manufacturer of the Bluetooth transmitter/receiver to find out how to activate Bluetooth on the computer and how to add a device to it.

  Refresh the connection Wireless to your Bluetooth device

  • Pair your Bluetooth device to your computer.
  • Re-establish a connection without wire if your computer does not detect a device compatible Bluetooth Microsoft if you try to use a Microsoft wireless keyboard compatible Bluetooth or mouse and the input device does not work, it is possible that your computer does not detect the device. To resolve this problem on a Windows computer, restore the link wirelessly with the computer. For more information, see the article of the Support Microsoft 811798 to http://support.microsoft.com/kb/811798

  Solve a connection failure when the installation software can connect to a Bluetooth Microsoft compatible device

  During installation, if the installer is unable to connect to the device via a Bluetooth connection, you must change the transmitter/receiver to use a Bluetooth mode managed by hardware.

  For more information, see the article of the Support Microsoft 953694 to http://support.microsoft.com/kb/953694

  Establish a Bluetooth connection when a device does not respond

  If the Bluetooth connection cannot be established, you may need to remove the device is unresponsive system and then add it again.

  1. Click Start, click all programs, and then click Windows Update.
  2. If the Bluetooth device is not responding is listed, select it and then click Remove.
  3. Click Start, click principally made programs, click the Microsoft mouse, and then click connect Bluetooth mouse.
  4. Follow the instructions in the wizard to connect to your device.

  Why is there a delay before a Bluetooth mouse answer after it has been idle

  To extend the battery life, Bluetooth devices go into hibernation after 8-10 minutes of inactivity. It may take several seconds for the Bluetooth mouse to reconnect when you resume using it after this period of hibernation. Thus, you may notice a delay between the time that you use the mouse and the response on the screen.

  Use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter

  Bluetooth wireless technology allows you to connect several devices to your computer. You may be able to use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, but this connectivity is not always supported by Microsoft.

  For more information on the use of other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, see the documentation provided with the device.

  For new devices, download the latest version of the software from the Web page of software downloading material.

  Connection of the keyboard of laptop Wedge for a tablet PC

  By default, the keyboard pairs Bluetooth Mobile from the hold with most tablet PC through safe simple pairing (SSP) with an authentication key. Some tablets, however, may not support SSP with an authentication key.
  In order to pair your keyboard hold such a Tablet Mobile successfully, use the following alternative pairing mode.

  Associate your keyboard by SSP without a password

  1. Hold down the Fn key as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on top of the keyboard flashes green and Red alternately. This means that your keyboard is detectable in your tablet in 6 minutes.
  2. On your Tablet PC, on the Start menu, select Control Paneland in category view, find the material and audio.
  3. Select Add a device.
  4. When the keyboard is listed, select it and follow the instructions to pair your keyboard Wedge with your tablet with success.

  Note
  If you want to associate your keyboard with a tablet or another computer that takes in charge the SSP with an authentication key, hold down the Connect button only.

  A keyboard or a Bluetooth mouse fails to reconnect after being left idle

  After you have used is not the keyboard or your Bluetooth mouse for a while, you may not be able to use the device again without rebooting the system or by turning your Bluetooth radio and turn it on again.

  For more information, see the article of the Support Microsoft 2758967 to http://support.microsoft.com/kb/2758967

• Palm Bluetooth keyboard

  Hello

  I have a driver problem with the Palm Bluetooth keyboard 3245WW running the 1.1.0.8 pilot on a Centro. After about 15 minutes of use, the keyboard will start connection loss every 3 min. After that 4-5 will reconnect the simple keyboard will not work. When in an application, I can use the top and to the bottom of the keys, but the right/left keys do not work. When these questions start to happen I have to do a soft reset to get it to work again. Then after the soft rest 2 I have to reinstall the driver for the keyboard. Needless to say I went back to the keyboard Ira that has always worked. Anyone has an ideas would be great.

  -Tim-

  OK, I unloaded everything, the unit did not charge anything except the keyboard driver. The only application that I used was Notepad. I do not have the blocking or the loss of function keys, but after 15 minutes, no use, I had to redo a reconnection. And as before, after a few reconnects I had to do a soft reset.

  Message relates to: Centro (unlocked GSM)

• Reinstall Mac OS with bluetooth keyboard

  Can I reinstall MacOS on Imac 27 even if I only got a bluetooth keyboard?

  Yes.

  Barry

• iOS 10 Bluetooth keyboard button publish?

  -That someone knows the problem of the Home Bluetooth keyboard button in iOS 10?

  If you pair a new keyboard Bluetooth, the Home button on the keyboard works very well at the moment. However, if you unplug the keyboard, lock screen of iOS, then reconnect the Bluetooth keyboard. The button of the BT keyboard can only to wake up the screen. She can no longer trigger the Siri.

  I tested the keyboards and the next button, they all have the same problem! The same scenario works very well in iOS 9 or earlier versions.

  Logitech K760

  Logitech K811

  Foldable keyboard Microsoft Universal (model 1695)

  IOS Satechi BT Home Button

  All third party material made suggestions of mine an assumption - at best.

  Barry

• IPad bluetooth keyboard

  After installing IOS 10, my bluetooth keyboard keeps losing connection?

  Make sure that you use a compatible Bluetooth keyboard > Keyboard wireless Apple Magic Keyboard compatibility with iOS - Apple Support devices

  Configure and use third-party Bluetooth - Apple Support Accessories

• on screen keyboard disappear connected bluetooth keyboard

  I have connected a bluetooth keyboard, however, the screen keyboard on will not disappear.  Does anyone know how to remove?  I tried to erase the spotlight search and it does not work.  I rebooted and reconnected the unit without success.

  Try unpairing the BT keyboard and matching it back.

  Configure and use third-party Bluetooth - Apple Support Accessories

• Dungeon of virtual keyboard to appear when you use bluetooth keyboard

  I use a surface 3 pro with a keyboard bluetooth as the main method of entry. The recent Firefox update keeps popping up a virtual keyboard of the system on each input field. This is a nice feature to have while no external keyboard is connected. However, it is extremely inconvenient if you have a connected bluetooth keyboard.

  Please would you consider to provide a toggle button to turn this feature off or just to test if a bluetooth keyboard is connected before appearing the virtual keyboard?

  Thank you.

  Hi, if you want to disable this feature, please enter about: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named ui.osk.enabled. Double-click it and change its value to false.

• After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and are not working properly.

  After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and do not work properly (I already tried several keyboards and is not Firefox or Chrome). This behavior is exacerbated in Illustrator CC, but also affect all programs and even my office. It drives me crazy, does anyone know how I can fix this problem?

  Mi IMac is a 27-inch, late 2013, 3.4 GHz Intel Core i5, and use a Wacom Intuos Pro.

  Could possibly be interfering with the entry Wacom drivers.

  Start safe mode and see if there are still have the problem there. Safe mode is slow and some things do not work, but it prevents some third-party boot loading software. If your keyboard works properly in Mode without fail, this would imply that some third-party software is causing the problem. If so, check the updates.

  It also takes more time to start because the BONE is clean some system caches that can also help.

  Try safe mode if your Mac does not end commissioning - Apple Support

• I have a MacBook Pro.  Is there a way to implement a rarely used keyboard key that - WHENEVER - it is pressed the computer will insert the string, predetermined character at the cursor position?

  I have a MacBook Pro.  Is there a way to implement a rarely used keyboard key that - WHENEVER - it is pressed the computer will insert the string, predetermined character at the cursor position?

  Yes. You can add in system preferences > keyboard > text.