Iconia W700P - need to access bluetooth keyboard during the boot UEFI or need to boot from a USB

Similar Questions

• HP Elitebook 8740w: How can remove the text / name of the company that is displayed during the boot process?

  Hello

  I bought my work laptop from my employer. During the startup of my employer's legal name is still displayed on the splash screen ' "(the screen with the HP logo).

  -J' already started back and ran the EREPLOGO. EXE utility to remove the logo (ereplogo.exe/e). The utility said that the logo has been removed;

  -in the BIOS 'view custom logo' is unchecked, so it will not use an image of the partition tools hp;

  However, during the startup the company name is still displayed on the top of the screen... :-(

  (1) how can I change this text to start or remove it completely?

  (2) what can I do to display the specifications of hardware during startup instead of this "splash screen"?

  Thanks in advance,

  SJW

  PS I have the latest BIOS (F.60 Rev.A, November 30, 2015)

  Hello

  I managed to change the line of text with the BiosConfigUtility64.exe.

  With "BiosConfigUtility64 getconfig:config.txt", you can write all the values in the bios and a text file with "BiosConfigUtility64 setconfig.config.txt", you can set all the values after you change the values you want to change. In my case, that I had to change the value of "property tag", which is the value that appears in the home screen during the boot process.

  Later, I discovered the tag 'property' can also be changed under the Security tab of the configuration of the BIOS (F10) normal... until I knew what the property tag, I associate the line of text to security so I did find the text before :-) field

  Best regards

  SJW

• The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more

  My daughter's office got fried during the last storm, even though she had a surge protector.  Obviously the power company line was bad.  The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more.  When she tries to run a system restore it gets "extended attributes are incompatible."..: thank you for your help.  Debbie

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the scan tool (SFC) System File Checker and check if it helps.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.Microsoft.com/kb/929833

  Method 2:

  Try to clean boot, and then check to see if this helps you.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 3:

  Try the steps in the following Microsoft article and check if it helps.

  Problems installing and uninstalling programs on Windows computers:

  http://support.Microsoft.com/kb/2438651

  Hope the helps of information. Please post back and we do know.

• mouse without borders do not transition to the keyboard during the passage of virtualbox for machine B

  Hello

  I have the following Setup.
  Win7 computer has
  Accommodation Virtualbox Ubuntu 12.04LTS
  Win7 machine B
  Whenever I go to Virtualbox directly to Machine B, the mouse works without any problem, but the keyboard does not transition.
  If I tap the keyboard typing rest on the Virtualbox VM commands.
  The only way to transfer is as follows.
  VM VirtualBox, mouse slide for Machine A Win7 box, click on and then go to the B machine where you will now be able to type (keyboard finally transitions).
  Note that I have observed the same behavior with other virtual machines, such as Mint and CentOS. So I don't think it's a problem related to the virtual machine.
  Finally, I used synergy before and it doesn't have the same problem. There are a few advantages to mouse without borders that is why I would use it.
  Please advise,
  Thank you
  VVhelp

  Found a solution: simply disable "Auto Capture keyboard" in the global preferences of VirtualBox.

• Access is denied during the application of group policy to Win 7 machines.

  I'm trying to change some information in a data file located in the Program files to a Windows 7 machine.  I would use my win server 2008 r2 group policy.  I tried the computer configuration > preferences > files but I still get an "access denied" error on the computer Windows 7."  In any case for this work?

  Thank you

  MRLS

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows 7.

  http://social.technet.microsoft.com/Forums/en-us/categories.

• How to disable the driver during the boot process?

  Hello

  I have uninstall a printer from my computer, but when I restart my computer during the process sometimes a back pop up windows and require a response at the prompt of the printer driver I uninstall, but this statement was not disabled or deleted.

  How can I access the startup file to change?

  Thank you

  Hi Reyes,

  Restart your computer and start pressing on the keys on your keyboard. On a computer that is configured to start to multiple operating systems, you can press on the -key when the Boot Menu appears. On the Advanced Boot Options menu, select Disable the Driver Signature Enforcement press .

  

  This will disable the drivers at startup.

  Hope the helps of information provided.

• W4 compressed, hoping that someone could tell me if I need to change the boot order to USB and how?

  Recently, I did a recovery of my tablet of W4 drive using a USB key and need to know if I should change the boot order.  If so, I also need to know how if a kind person might help.  Appreciate any help, Muriel

  During boot press and hold the power and volume button when turned off and do not release until the BIOS menu appears. Boot order will be one of the selections.

• Tecra A11 - 113 - white screen and the cursor of the mouse during the boot

  Hello

  My Toshiba Tecra A11-113 with win 7 32 bit boots with a mouse cursor and the visible white screen.
  I tried to start under different boot options. Mode, safemode, last repair job configuration
  and msdos command only... all these startup options give the same result.

  I also tried with win 7 32 bit dvd, but same result.

  I am able to access the C drive by booting with a linux key, so the data is visible.

  Can someone please give me a solution?

  Thank you

  What happens if you access the BIOS? Is menu visible on-screen BIOS?
  Turn on the unit F2 button and press.
  This should allow you to access the BIOS.

  If you will be able to access the BIOS and see everything as usual, then the screen is OK and I think there is a problem with your installation of Windows System.
  So boot from the Toshiba Recovery disk should help you solve this problem.

  You said that you already tried to boot from the Windows DVD disc is this Toshiba Recovery disk? In my opinion, you use this disk to restore the laptop to factory settings.

• Lenovo T410s and Mini Dock Plus Series 3 with 2 monitors DVI, white screen during the boot process

  Hello

  I'm having a problem with the configuration of my lenovo thinkpad T410s.

  I have connected two 19' DVI monitors for the docking station, but during the startup process, I get no output on screens.

  After loading Windows 7, the windows login screen.

  In the BIOS all the graphics preferences are being "switchable graphics", because I also use it on business trips.

  Does anyone have an idea how to solve this problem?

  Thank you!

  Michael

  
  

• Cannot access internet occasionally during the day. Having to reconnect.

  problem 169.254

  My PC is running XP and is licensed and up-to-date. I connect to Internet using ISP Orange and a Livebox router. Occasionally, maybe once a day, I can't access the Internet or e-mail. I can't repair the connection, which is to get a new IP address. While in this condition I CAN access internet through my netbook, wireless, which also works in XP. This makes me think that my router IS connected to the internet. I can re - establish an internet connection by removing power to the router and reconnect the power supply after a few seconds. However, this process is very annoying that the router then takes about 3 minutes to make an internet connection.  I found that my IP (before the reset of the router) on my desktop connected cable (that has the problem) has been 169.254.16.60. I understand that it is the beach allocated to private networks. I tried all the suggestions including reset winsock, TCP/IP reloading, loaded the latest drivers for NETWORK card and disable my firewall (Outpost). My PC is permanently set to get an IP by DHCP. It lasts for almost a year now and I think I've tried everything. I don't want to reload XP. I suspect that this has started happening after I deleted a scanning program of free registry that I had downloaded from net ther. I have just run Microsoft Safety Scanner and it has reported, no spyware, malware or viruses. My AVG virus program and is up-to-date.

  Anyone has any suggestions please. I'm not an expert by any means think (!) I understand what I'm doing!

  Mike

  It might actually be your 'firewall' (Outpost)... that is causing your problem!

  (What "adversarial"... with an integrated XP! Even if you say that it (XP) has been disabled! Not COMPLETELY allowing your router working properly, because it is "in conflict" with that, too!)

  Turn it off (Outpost)... means that the software application still in your computer and always 'in conlfict"with the XP firewall.

  In regard to the average of your software antivirus, crikey, why not OPT for the Microsoft Security Essentials?

  Yes, I did.

  It's free, as long as the OS is legitimate, and, as they say,... yours is!

  SET all SETTINGS... REMOVE, and everything is DONE (by the 'set up' scheduling)... for you.

  (By the way, it uses AS it's very own firewall (firewall Defender)... or XP.) "They are much safer to use.)

  Download it, it's ready to install, once you remove moy.

  Update as soon as you have it installed, and properly "standing upward", nothing could be easier.

  As for your router, I suggest you contact your ISP provider.

  To help RESET your router once again correctly!

  And, oh, one last thing... Stop your 'DIY '.

  ('Tinkering' would be used to do any bad problem much worse than it really is! By your own admission, you have done enough of that! Get it all right, even once, then leave well alone.)

• Unable to connect wireless Bluetooth keyboard with the iMac

  After researching for a numeric keypad for my iMac (OS X version 10.6.4), I decided to get a keypad wireless Microsoft due to many positive reviews from Mac users. I tried to connect the camera today: 1) turned on the numeric keypad) 2 Mac software came on and recognized 'Microsoft BlueTooth number Pad' 3) a password has been generated) 4 ' synchronization attempt failed"I tried several times with the same result.  I realize that I am a Mac user, but I would give it a try since the system of thought is a Microsoft product. Any help would be appreciated because I would REALLY use it!

  Hi mfranken.

  As you have is on Mac operating systems, I suggest that you contact Apple for assistance.

  http://www.Apple.com/support/osFamily/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message: cannot access Windows Installer during the installation of Java SDK

  Original title: How To Install Windows Installer?

  OK, so I came to my laptop to do a writing in Word. Later, I tried to install the Java Development Kit, but he said something, of not being able to access Windows Installer. I ignored it and went to download a registry cleaner program to try to solve, but he also said "cannot access Windows Installer". Undertook research to install across the entire hard drive and the Windows registry and I found nothing. Not even the key MSIServer was there. I went to the Services and it was not there either. I opened my journal program, and he said that Microsoft Windows Installer has been deleted from the hard drive. The newspaper program that I use is open source and theres no script that writes, deletes, or replaces all files! So all I can do now is to install again, so I went to the Microsoft Download page: Windows Installer but when I tried to download mine)

  Windows6.0 - KB942288-v2 - x 86 .msu) he said first of all, "the search for updates...". "and then"update does not apply to your system. Any help would be appreciated!
  System Specs:
  -Windows Vista Home Premium SP1 32-bit
  -Inter Core 2 Duo Processor
  -3 GB RAM
  -220 GB hard drive
  -105 GB free HDD
  -Dell Inspiron 1525 laptop

  OK people! I found the answer myself. The only thing I did was to do a system restore to the nearest date when it started to happen and after a few minutes I got the key MSIServer and everything started working again! YAY!

• I get error: access is denied during the installation of my adobe photoshop

  Original title: access denied

  Hi all! I would like to ask if what is the significance of this...? and how can I solve this problem... I encounter this when im installing my adobe photoshop and I don't know how to fix this...

  

  You should not install to that folder as it is MORE a temporary folder, it should be installed to your user name

  Why are you trying to install it there?

• Error message "Drive has not the ability to access this service" during the conversion to Word online

  With the help of Reader 10.0 used to be able to convert files without problem.

  Hi thill33,

  Old version of the player does not support the acrobat online service.

  You need to install the latest Adobe Acrobat Reader DC Acrobat Reader DC Learn & support, or you can use the online service at https://cloud.acrobat.com/exportpdf.

  Kind regards
  Nicos

• Lenovo U460 - Internet access Wifi unavailable during the upgrade to win 10 of Win 7

  Hi all

  WiFi is showing all hotspots and when I click on connect, its connected but with warining symbol to wifi toolbar icon. (without link)

  I tried to upgrade to windows 10. Everything seems smooth except wifi.

  I tried the following with the following solutions, but plop down

  1 update latest drivers wifi

  2. Device Manager uninstall, then reinstall the wifi drivers

  3 registry HKEY delete and an indicator

  4 remove any VPN software

  5. enable and disable bios

  6 Ip reset and renew

  It would be great if someone gives me the best solution.

  Thanks in advance

  Your device is not compatible with windows 10,
  There are no drivers for windows 10 of Lenovo officially.
  return to windows 7 will solve the problem.
  You can see here that there are no drivers to win 10

  http://support.Lenovo.com/GB/en/products/laptops-and-netbooks/IdeaPad-U-series-laptops/IdeaPad-U460?...