Debugger ATG question
Hi all.
I have problem to connect the atg eclipse debugger. His shows below the error message every time I try to put the debugger.
Unable to connect to remote VM. Connection refused.
Connection refused: connect
I m using below
ATG10
Eclipse Helios Service Release 1
Weblogic11g.
I made changes to the server location
Homepage > Summary of the servers > atg_prod
-Datg.dynamo.server.name = atg_ps1_dev - Xdebug - Xrunjdwp: transport = dt_socket, address = 8787, server = y, suspend = n
Its still does not. Any body can help me to solve this problem.
Thank you, Raymond
Can you change the
Set debugFlag = true And when you start the server, it should look like this: *************************************************** * To start WebLogic Server, use a username and *. * password assigned to an administrator-level user. For *. * server administration, using the WebLogic Server *. * the http://hostname:port\console console *. *************************************************** from weblogic with the Java version: Look for transport dt_socket address: 8747 Java version "1.6.0_29". Java (TM) SE Runtime Environment (build 1.6.0_29 - b11) Java for 64-bit Server VM (build 20, 4 - b02, mixed mode) WLS starting with line: C:\oracle\MIDDLE~1\JDK160~2\bin\java-client -Xdebug - Xnoagent - Xrunjdwp: transport = dt_socket, address = 8747, server = y, suspend =n -Djava.compiler = NONE Peace Shaik
Tags: Oracle Applications
Similar Questions
-
Interview questions ATG for 3 + experience
Hello
1. What are the important issues in the ATG for 3 + experience?
2. What are the Questions they ask in the trade
a. account management Module
b. ShoppingCart Module
Thank you
Sudharsan.s
Normally the Interview will begin with ATG Basics
Formhandler, drop, Servlet, referential Pipeline, how to create the new repository, a relationship a-a, a - many, many. types of cache and cache modes.
Then,
If you have worked on the customization:
Scenario, slot, targeting. Diff b/w and targetter scenario.
If you have worked on trade:
How to extend OOTB repositories, methods used on different pages: shopping cart page, the page of payment. IE, how to add article to the shopping cart, how to show the payment page, etc..
How to create the trade pipeline string, link.
How ATG pricing works.
Read more:
ATG Programming Guide (until the chapter of Servlet of Pipelines)
Repository guide ATG (until the chapter of the Cache)
ATG Commerce Programming Guide (till Pipeline Chains Chapter)
There are a few messages on yahoo or in some blogs. Just ATG google interview questions.
As experience grows, people will wait to know not only the names of methods, but how internally works ATG.
Kind regards
Nitin.
-
10.2 ATG with sendEmail script question
Hi all
I use ATG10.2, and I have created a registry script that sends an email, welcome as email of new records.
I have configured all the smtp properties, but the email is not send. I checked the property of the EmailEtat function in the profile, and it's valid status.
I don't have any error, and debug component scenarioManager I saw that the event is atg.dps.Register, it seems.
But I got this in my debug as:
"the individual instances 0 were found for the user object: 4604715.
Any idea?
Thanks in advance
Not sure what exactly is the problem in your environment, but just throw in some ideas... TemplateEmailSender has a property to send emails in the same thread. You can check that I think that for the events of local scenario it can be safely set to false.
Try to set dummyMode to true in SMTPEmail and check if you can see all of the markup of your email template rendered in the console ports server logs / every time e-mail action is triggered. I say this just to confirm that e-mail action is getting triggered after each event registration, so we're good up to this point. Sometimes, if you have multiple instances of ATG to connect to the same database, it is possible an instance of thugs (who might have been saved as ESG/PES) may out messages before internal event queue JMS gets it a legitimate server. So be sure that you are not running in this kind of situation.
In the ATG, when e-mail messages are sent using sender of model, an HTTP request is generated and maintained to make the JSP email template. So another area, you can watch it if any custom pipeline servlet which is originally a question because this request goes through the pipeline.
-
Hello
I encountered the following problem. When I try to use the debugger, I get the following error:
An internal error occurred during: "read the symbolic debugging information: leveltest.
java.lang.NegativeArraySizeException
The application is downloaded to the device, but it freezes on startup (with the blackberry logo) loading and then the error is displayed in the IDE.
I use the following IDE:
® For QNX Momentics IDE for BlackBerry® native SDK for Tablet OS
Version: 2.0.0
Build id: 201202171813
And Mac OS X 10.7.4. PlayBook is connected via WiFi.
Everyone has the same problem?
Thank you!
Just tried to use the debugger if USB and it worked fine
-
Question 11 ATG with target to the IAB
Hi all
I use ATG 11 and get a strange problem with BCC.
When I click on the target and Segmentation, to the ICC at home, I got this error when the page is loaded:
Container: ATG. Web.Tree.TreeException; Source: ATG.repository.RepositoryException: The RepositoryView passed to executeQuery or executeCountQuery cannot be null
at atg.web.tree.repository.RepositoryTreeDefinition.getRealRootNodes(RepositoryTreeDefinition.java:762)
at atg.web.tree.repository.RepositoryTreeDefinition.getRootNodes(RepositoryTreeDefinition.java:772)
at atg.web.tree.BucketingTreeImpl.getChildren(BucketingTreeImpl.java:212)
at atg.web.tree.TreeState.getChildren(TreeState.java:98)
at atg.webui.taglib.GetTreeChildrenTag.doStartTag(GetTreeChildrenTag.java:197)
Truncated. check the log file full stacktrace
Caused by: atg.repository.RepositoryException: the RepositoryView passed to executeQuery or executeCountQuery cannot be null
at atg.repository.rql.RqlStatement.executeQuery(RqlStatement.java:207)
at atg.web.tree.repository.RepositoryTreeDefinition.executeRootRQLQuery(RepositoryTreeDefinition.java:859)
at atg.web.tree.repository.RepositoryTreeDefinition.getRootRepositoryItemNodes(RepositoryTreeDefinition.java:801)
at atg.web.tree.repository.RepositoryTreeDefinition.getRealRootNodes(RepositoryTreeDefinition.java:754)
at atg.web.tree.repository.RepositoryTreeDefinition.getRootNodes(RepositoryTreeDefinition.java:772)
Truncated. check the log file full stacktrace
Because of this error, I can't create targets and segments of the user. We don't personalize it sees, so it is with code OOTB.
I tried to get this to the Support of Oracle, but without success.
Any suggestion?
Thanks in advance.
Hi all
I have solved my problem. It was a bad module to the MANIFESTO. MF file.
Good bye.
-
Hi all
I use version 11.0 ATG, and I'm getting a few problems when attempting to create new coupons to the IAB.
I am able to create promotions, but when click the Coupon to create a new, I get the following error:
Error Thu Jun 05 15:38:50 GRT 2014 1401993530690/atg/dynamo/servlet/sessiontracking/GenericSessionManager/4iBtTsYWaG-aExqK1Dhmxa6dU5am1yA1RO22fP1aMkrIi_CIFC7v! 1040511758! 1401993217561/ATG/télécommande/assetmanager/parcourir/service/BrowseService---Flex.Messaging.MessageException: atg.flex.service.RemoteOperationException: java.lang.NullPointerException
Error Thu Jun 05 15:38:50 GRT 2014 1401993530690/atg/dynamo/servlet/sessiontracking/GenericSessionManager/4iBtTsYWaG-aExqK1Dhmxa6dU5am1yA1RO22fP1aMkrIi_CIFC7v! 1040511758! 1401993217561/atg/remote control/assetmanager/browse/service/BrowseService
at flex.messaging.services.remoting.adapters.JavaAdapter.invoke(JavaAdapter.java:447)
Error Thu Jun 05 15:38:50 GRT 2014 1401993530690/atg/dynamo/servlet/sessiontracking/GenericSessionManager/4iBtTsYWaG-aExqK1Dhmxa6dU5am1yA1RO22fP1aMkrIi_CIFC7v! 1040511758! 1401993217561/atg/remote control/assetmanager/browse/service/BrowseService
at atg.flex.messaging.services.TransactionalJavaAdapter.invoke(TransactionalJavaAdapter.java:189)
Error Thu Jun 05 15:38:50 GRT 2014 1401993530690/atg/dynamo/servlet/sessiontracking/GenericSessionManager/4iBtTsYWaG-aExqK1Dhmxa6dU5am1yA1RO22fP1aMkrIi_CIFC7v! 1040511758! 1401993217561/atg/remote control/assetmanager/browse/service/BrowseService
at flex.messaging.services.RemotingService.serviceMessage(RemotingService.java:183)
/ ATG/Dynamo/servlet/sessiontracking/GenericSessionManager/4iBtTsYWaG-aExqK1Dhmxa6dU5am1yA1RO22fP1aMkrIi_CIFC7v! 1040511758! 1401993217561/atg/remote control/assetmanager/browse/service/BrowseService (#2)-induced:java.lang.NullPointerException
Error Thu Jun 05 15:38:50 GRT 2014 1401993530690/atg/dynamo/servlet/sessiontracking/GenericSessionManager/4iBtTsYWaG-aExqK1Dhmxa6dU5am1yA1RO22fP1aMkrIi_CIFC7v! 1040511758! 1401993217561/atg/remote control/assetmanager/browse/service/BrowseService
at atg.remote.commerce.assetmanager.PromotionsAssetFilter.getUserPromotionIds(PromotionsAssetFilter.java:346)
Error Thu Jun 05 15:38:50 GRT 2014 1401993530690/atg/dynamo/servlet/sessiontracking/GenericSessionManager/4iBtTsYWaG-aExqK1Dhmxa6dU5am1yA1RO22fP1aMkrIi_CIFC7v! 1040511758! 1401993217561/atg/remote control/assetmanager/browse/service/BrowseService
at atg.remote.commerce.assetmanager.PromotionsAssetFilter.createContextFilterQuery(PromotionsAssetFilter.java:270)
Error Thu Jun 05 15:38:50 GRT 2014 1401993530690/atg/dynamo/servlet/sessiontracking/GenericSessionManager/4iBtTsYWaG-aExqK1Dhmxa6dU5am1yA1RO22fP1aMkrIi_CIFC7v! 1040511758! 1401993217561/atg/remote control/assetmanager/browse/service/BrowseService
at atg.remote.commerce.assetmanager.PromotionsAssetFilter.getQuery(PromotionsAssetFilter.java:136)
I use an ear file unpacked, and all other BCC features work correctly.
Any idea?
Thanks in advance
Hello
The problem is resolved. We tried to simply create a promotion (not inside a coupon), and after that, the coupon tab starts working correctly again.
We do not know why this problem occurred, we know that the creation of coupons is from the ATG.
Now we can access and create coupons correctly.
Good bye.
-
ATG 11 ForgotPassword Oracle question
Hi all
I use ATG 11 and trying to send email when the user clicks the component ForgotPassword.
The email is sent, but I can't get param newPassword.
My TemplateEmailSender is configured as:
contextPathPrefix ^ = / Constants.null
fillFromTemplate = false
ForgotPasswordhandler:
templateEmailSender = / atg, userprofiling, email, TemplateEmailSender
profileTools = / atg/userprofiling/ProfileTools
templateEmailInfo = / atg/userprofiling/ForgotPasswordEmailInfo
fillFromTemplate = false
ForgotPasswordEmailInfo:
templateURL=/context/emailtemplate/forgotPasswordEmailTemplate.jsp
messageSubject = forgotten password Email
messageFrom =[email protected]
contentProcessor = / atg, userprofiling, email, HtmlContentProcessor
In my model, I try to use < dsp:valueof param = "newpassword" / >
Looking at the database, the new password is stored properly.
Any help or suggestion?
Thanks in advance
Hello Prateek G,.
Thanks for the reply.
We could finally solve the problem. It was a session problem, caused by a session of atg personalization.
Returning to our customization, it starts working again.
Thanks for any help.
-
Facets ATG 10.2 question search
Hi all
We use the version 10.2 ATG with ATG research and we get some strange problem aspects.
Sometimes we go to a category and the facets appear correctly, the label of the facet and the values to refine the search. But sometimes, in the same category, the facets does is display the label and not the display values to refine.
It occurs only in the production environment, no development.
We checked the research project to the BCC, facets and code jsp and everything is ok, because it works correctly most of the time. Also, we checked the newspaper and got no errors with the refinement of the research.
Everyone has ever known cela or has any point to help me?
Thanks in advance.
Hi all
We found a document at the center of Support of Oracle to solve this problem, Search indexing fails to Post Index customizations (Doc ID 1526494.1).
But after the follow-up document, the problem still happening.
We could see that in the component/atg/commerce/search/refinement/ProductCatalogInvalidatorService, two properties was not well-regulated: productCatalog and refinementRepository (Oracle document didn't say anything about defined these properties).
After you set these values and invoke startService, it worked correctly.
Good bye.
-
Faced with the question while with ATG Cybersource integration
Hi all
I am facing problem with address verification while integrating cybersource with ATG.
Any integration with cybersource is still work correctly.
If I used addressVerificationProcessor VerifyOrderAddresses and mention to use CyberSourceAddressVerify, I get the error associated with the below houseno. box not found
addressVerificationProcessor = / atg/commerce/payment/CyberSourceAddressVerify
Can someone help me on this please.
It's urgent. Pls let me know if need more details
TIA,
MILIN
Error log:
12:03:01, 992 INFO [ShoppingCartModifier] DEBUG 0 gifts to collect there
12:03:01, 993 INFO [ShoppingCartModifier] DEBUG add order credit card
12:03:02, 075 INFO [ShoppingCartModifier] DEBUG error form - stay on the same page.
12:03:04, 942 INFO [CyberSourceAddressVerify] DEBUG - request-
12:03:04, 946 INFO [STDOUT] ship_to_state = CA
bill_state = CA
ship_to_city = San Jose
bill_city = San Jose
bill_country = we
bill_zip = 95131
ship_to_country = we
ignore_avs =
merchant_id = mykkaushik
bill_address2 =
ics_applications = ics_dav
ship_to_zip = 95131
bill_address1 = 1, Main Street
ship_to_address2 =
client_lib_version = Sun Microsystems Inc./1.6.0_31/Windows 7/6.1/-/Java/5.0.3
ship_to_address1 = 1, Main Street
merchant_ref_number = pg460011
12:03:06, 320 INFO [CyberSourceAddressVerify] DEBUG - response -
12:03:06, 320 INFO [STDOUT] dav_rcode = 0
ics_rcode = 0
ics_rmsg = number of House/box found on the street.
request_id = 3539115850040180464524
dav_us_info = S00000
dav_us_error_info = E421
request_token = AhijLwSRf7YylSTvL7cYIJ + 1EEDyqAJGlwtJMsXXwMhEAAAA/ED@BGF7'¢
dav_rflag = DINVALIDADDRESS
ics_rflag = DINVALIDADDRESS
merchant_ref_number = pg460011
dav_rmsg = number of House/box found on the street.
12:03:06, 364 PipelineError DEBUG INFO [ShoppingCartModifier]: key = InvalidAddress; error = {pg460011 = home
12:03:06, 367 INFO [ShoppingCartModifier] DEBUG add form exception: InvalidAddress: House/box number
12:03:06, 367 DEBUG INFO [ShoppingCartModifier] origin of exception: null
12:03:06, 368 INFO [ShoppingCartModifier] DEBUG Transaction marked as Rollback - redirect to: billing
12:03:06, 369 DEBUG INFO [ShoppingCartModifier] afterSet sees currentTransaction TransactionImple < a
nStatus.ABORT_ONLY >
12:03:06, 369 INFO [ShoppingCartModifier] DEBUG afterSet validation transaction TransactionImple < ac, B
TUS. ABORT_ONLY >
12:03:06, 494 INFO [ShoppingCartModifier] DEBUG released the local write lock using id 270000There is a problem with the entry that you gave in the field: House / box
Cybersource error return:
Home/box number found on the street.could you please valid number here who is the number waiting to Cybersource service.
-
Hello
What is the minimum required version application ATG database roll up 6.
9.2.0.8 or 9.2.0.6 is ok.
Any ATG Rollup 6 application on 9i.
Concerning
ALIHi taher;
I suggest check this site: http://babudba.blogspot.com/2008/09/upgrade-oracle-from-10201-to-10204.html... its really simple and useful, one
Respect of
HELIOS -
Expect this application suggestions of comment as a bit of a novice.
-
How to access the inner workings of firefox (debugger) with mozrepl
I want to use mozrepl to:
-Open the js debugger
-switching js file
Toggle the breakpointHow to do?
Best place to ask this question is in their support mailing list: https://groups.google.com/forum/#! for... /mozlab
-
Dr Watson postmortem debugger has encountered a problem and stop windows...
"Dr. Watson postmortem debugger has encountered a problem and needs to close windows," not only tries to close windows... it freezes. This forces me to shut down or restart the computer through Task Manager.
This happens when I try to open JPEG with the default windows, program files in a specific folder. The program (in 32 XP sp3) is apparently photo and fax viewer winFX. When the debugger initiates its closure, he tries to send an error report. Within the error of the report data file specifies a "appcompat' divergence. This leads me to believe that there is a compatibility issue somewhere for this folder. (This folder contains several folders of JPEG files and a few vids).
I am able to view pictures of other files, in quicktime, Viewer , but the underlying problem remains with the default veiwer and this specific folder.
Also, I'm not sure if it is independent, but when you try to view video files, they are scrambled and the sound stutters... even with quicktime player. It's a difficult question because; Here are pictures of family and vids I am trying to display and modify.
I hope there, can someone help me diagnose the root problem and the default player of this folder. Otherwise, I changed the options files to open the JPEG files and video in quicktime. However, I prefer to fix the original problem, rather than simply "he sweep it under the rug." Plus I need to access the above JPEG file and vids, with PC crashing every time.
Thank you for your time and your consideration for reading this post and tryng to help me find a solution.
OK guys, I kind of answered my own question.
By publishing this response, I hope that I can help someone else "self-diagnose" similar problems.
I was able to right-click on the file and copy it to a USB key. Then I downloaded the folder of JPEGs and videos to another computer. I was able to open all folders and files (using Windows Media Player Quicktime) without problem. This tells me that the laptop I took the files of do have enough RAM to see to many files at once. Apparently the folder content on data 3Gigs, the laptop has only 894MB RAM.
It seems that there is a new project in the future lol, laptops. On that same note, I installed 4 GB of RAM (1 x 4) on the desktop, (the same Office I opened media files with) and made improved DRAMATICALLY (from the 256 MB x 2). This office is a dinosaur, but I'm happy to have made this update... it's a lot cheaper than the buy-in of a newer pc, and he cares about today's computing needs.
Do not forget to check with the service manual for your PC, to determine the maximum amount of RAM it can handle. Install it, or have a qualified technician to do if you do not trust your capabilities. You'll be glad you did.
I'll do the same for the laptop and report back with my progress and results. I hope that I will be able to open those multimedia files on the laptop after upgrading RAM. It would be nice to be able to modify multimedia files on the go.
Thanks to all those who read this post
-
Driver Microsoft Stop question
I have an update to my previous question. I just conducted a test - up to now, I can print a document, but after printing, I get the blue screen and I have to restart my computer. I get the error message is similar to that experienced by the user - LSensale - something about a pilot is not "less or equal to" someone knows how to solve this problem?
It can help to look at the files minidump against accidents with a debugger.
Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?
The following link has information about the use of Windows Live SkyDrive:
If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop
In addition, you do not necessarily have compress the minidump files, you can download one at a time.
-
How and which window should I use to enable jit debugger?
I need to enable jit debugger so that I can download microsoft fix Center, where the jit debugger is located, where do I go to find and what I do to activate it?
Gift of sincerely
Hello
Debugging JIT activation requires the knowledge and the application of the programming error needs active debugging. If we get the full text of the message and when you receive we can facilitate troubleshooting.You can also ask your question in the MSDN forum for better support.
Maybe you are looking for
-
An effective link or a scam?
I just got a text from AppleGB saying that my account has been locked because there were unusual attempts on my apple ID. He gave me a link to open it in www.irestore.acc4.co.uk this is authentic?
-
I have over 600 pieces of junk emails coming in on the same account. I tried to block the senders using rules in preferences, but it does not work for me. Are there any suggestions? I use OS 10.11.4. Thanks in advance,
-
I suspect that an original device connected to the modem cable... an intermediate device... and there should be a final device in a place further from the original device. I note that tech online article does talk to a wireless network using the 802.
-
Convert integer to string and show two numbers
Hello How can I convert an integer to a string? StationGlobals.MyInteger is 1. With the help of Str (StationGlobals.MyInteger) must convert to "01" instead of only 1. How is that possible? THX
-
I have visual studio 2010 with Crystal reports extension add on. Everything works perfectly in development (Win XP Sp3). When I create my Web site and try to access a report crystal on my web server (Windows 2003 R2 32 bit) I get the following erro