Debugging code QML

Similar Questions

• How to debug javascript/qml?

  is there a way to set breakpoints in qml/javascript and debugging code?

  Normally I can SSH to my Nokia N9 will enable developer mode.

  You should also be able to do it on the playbook:

  http://openbbnews.WordPress.com/2011/12/21/devuser-and-1000/

  And then edit files using vi (assuming that QNX vi?).

  I have yet to try this with my playbook, but I'll do that when I start the porting on BB 10 soon.

• GPU (Graphics Chip unit)-debugging codes

  When you download an update from third party (and of course out of the room) my mac showed white screen when I went to check on it.   After turn off and restart - Console showed cycle debug GPU - with a bunch of debugging codes and no way to interpret them.

  I think the screen saver may have caused the problem - to eventually try to start - at the same time my connection may have got it wrong - 2 things is going after the same resource at the same time.

  I use Opera as I'm on Snow Leopard with no way to get to the later versions of apple because they will not sell custom media commands.

  What model Mac Pro?

  What graphics card is installed?

  Maybe the graphics card has failed.

• DBG1012: Debug deployment errors, can't run debug code

  DBG1012: Debug deployment errors, can't run debug code
  
  I got this error when im trying to load the data from different database...
  
  I myself DWH database with the option "target warehouse"... n HR database with the option "data source"...
  
  I tried to load HR table to table DWH... n im already ensure that both databases have this table...
  
  n This is my debug data:
  
  Analysis of card to debug...
  Retrieving the connection of Control Center information...
  Connecting to the Control Center schematic...
  The character set of the Control Center schema checking...
  Configuration of the sources and targets...
  Card validation...
  Correlated Commit is DISABLED.
  Generate debug package...
  Deployment of debug temp tables...
  Deploying debug package...
  ***********************************************
  Messages of debug code deployment:
  LINE 16, COLUMN 10:
  PL/SQL: ORA-00942: table or view does not exist
  LINE 11, COLUMN 3:
  PL/SQL: SQL statement ignored
  End of messages of debug code deployment
  ***********************************************
  Mapping debugger error:
  oracle.wh.service.sdk.mapping.debugger.WBMappingDebuggerException: DBG1012: Debug deployment errors, can't run debug code.
  
  What should I do?
  
  THX 4 your attention...

  LINE 16, COLUMN 10:
  PL/SQL: ORA-00942: table or view does not exist

  Take the generated deployment script.
  and focus on line 16.

  Make sure table name e\whether that it hit in the database.
  If read access is provided if it is in the different database.
  Check the line number of the package body.

• Java Script debugging in QML

  Able to follow the instructions and check the attached java script debugger or at least the QDeclarativeDebugServer is assuming they are one and the same.

  However, may not know how to set a breakpoint in the code of java script from one of my qml files.

  Anyone have this working?

  Have you read what...

  http://developer.BlackBerry.com/Cascades/documentation/Getting_started/tools/debugging.html

  and debugging of Javascript enabled?

  It's just a case of double click in the white space as you would for C++, to the left for the code you want to break as a result.

  It is true that it is a small area in one click, try to get in the white end cap as close to grey that you can.

• Debugging code inside the library of the ADF

  Hello
  
  I use JDeveloper 11.1.2.1
  
  I created the library of the ADF with general code for my project.
  Is it possible to tracking within this library code ADF from a project that use this library for debugging this project?
  
  Anatolii

  Hello

  A library contains the class files, you must have the source of debug and trace.

  For more information about debugging:

  http://download.Oracle.com/docs/CD/E12839_01/Web.1111/b31974/web_testdebug.htm

  Hope this will help.

  -Prasad

• How to debug code source ADF

  Hello
  
  Please let me know how to join the code source ADF Faces to JDeveloper and how to debug?
  
  Kind regards
  Kiran

  It is available within our Oracle intranet.
  You can me ping at Oracle and I'll give you the link where to download it from.
  NB: you will get a straight answer using our internal forums or mailing lists.

  I costs nothing to your business unit, but if ever we meet, it will probably cost you a drink ;)

  You will find advice on the configuration and use of the source to debug applications in the developer's Guide to Fusion for the ADF ADF:

  [31.7.1 with Code Source ADF with the debugger - URL: http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/web_testdebug.htm#CEGFGHJC]
  31.7.2 How-to Set Up the ADF Source Library user - URL: http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/web_testdebug.htm#BABFBCED
  and
  31.7.3 How to add the ADF source library to a project - URL: http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/web_testdebug.htm#sthref2595

  Kind regards

  Didier

• Is there a way to debug code DataVisualization?

  I try to write my own rendering axis engine and find it very difficult to obtain after the calculations of the gutter.  I désarchivés the data visualization source to view it, but it's too complex for me to understand easily.  Is it possible to debug against that source, then I try to scroll the axis rendering calculations and hopefully understand how to fix my own?

  Thank you.

  If you download the stable version 4.0.0.13875, you will find the DMV source in

  frameworks/projects/datavisualization and the CFC in the frameworks/libs who

  must have debug information.

  The DMV code is now Open source with Flex 4.

• < CLOSED > USSD / Test Mode / Debug Codes

  EDITED POST - DELETED DATA

  I'm sorry, but you can't post it here. For many of these codes can brick a phone - most of this is not intended for most users.

  Do not post similar articles.

• Tokens signature and debugging code

  I worked on an application using Cascades. I signed the app and it loaded on my Z10 and it works very well. If I then delete the token of debugging on the phone, the application runs is no longer.

  I thought that the debugging tokens were only necessary to run unsigned applications.

  What should I do to get the application to run without a token of debugging on the phone?

  Start by importing a signed Release Build (file > export and then BlackBerry > Release Build)...

  Then in Explorer under BAR packages, right-click on your .bar file and choose BlackBerry tools > install

• Debugging code

  Hi all
  I need to know the best practices for writing SELECT with the DEBUG directive
  
  

  SQL> select * from v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
  PL/SQL Release 11.1.0.7.0 - Production
  CORE    11.1.0.7.0      Production
  TNS for Solaris: Version 11.1.0.7.0 - Production
  NLSRTL Version 11.1.0.7.0 - Production

  By example, for this SELECT
  

  SELECT *
    FROM USER_OBJECTS
   WHERE -- REAL CONDITION
              OBJECT_NAME LIKE '%1%'
              -- DEBUG CONDITION
              --OBJECT_NAME LIKE '%2%'
  ;

  I wrote this query:

  WITH IS_DEBUG AS (SELECT 'NO' IS_DEBUG FROM DUAL)
  SELECT *
    FROM USER_OBJECTS A, IS_DEBUG
   WHERE                                                                                                                      
         -- Real Condition
         (IS_DEBUG = 'NO' AND OBJECT_NAME LIKE '%1%') OR 
         -- Debug Condition
         (IS_DEBUG = 'YES' AND OBJECT_NAME LIKE '%2%');

  Is there a more professional approach? Something like #ifdef...
  
  Thank you all,
  
  Riccardo

  Oh,.

  It is:

  This is called conditional compile+ if you change the session before compiling your package...

  Good bye
  DPT

  SQL> ALTER SESSION SET plsql_ccflags = 'MY_DEBUG:0';
  
  Session altered.
  
  SQL>
  SQL> CREATE OR REPLACE PROCEDURE mytest IS
    2    counter  NUMBER;
    3  BEGIN
    4    DBMS_OUTPUT.put_line (   'MY_DEBUG = .'
    5                          || TO_CHAR ($$my_debug)
    6                          || '. -->');
    7  END;
    8  /
  
  Procedure created.
  
  SQL>
  SQL>    EXEC MYTEST;
  MY_DEBUG = .0. -->
  
  PL/SQL procedure successfully completed.
  
  SQL>
  SQL>    ALTER SESSION SET plsql_ccflags = 'MY_DEBUG:1';
  
  Session altered.
  
  SQL>    EXEC MYTEST;
  MY_DEBUG = .0. -->
  
  PL/SQL procedure successfully completed.
  
  SQL>
  SQL> CREATE OR REPLACE PROCEDURE mytest IS
    2    counter  NUMBER;
    3  BEGIN
    4    DBMS_OUTPUT.put_line (   'MY_DEBUG = .'
    5                          || TO_CHAR ($$my_debug)
    6                          || '. -->');
    7  END;
    8  /
  
  Procedure created.
  
  SQL>
  SQL> EXEC MYTEST;
  MY_DEBUG = .1. -->
  
  PL/SQL procedure successfully completed.
  
  SQL>
  

  Edited by: T.PD the 06.05.2011 11:25

• QML no compilation errors, but a run-time error, how to debug?

  Code QML without compiling error, but not show debug in C++ code show that qml-> hasErrors() took, but the I don't know what error cause of line. any ideas? I am looking for debug QML, but it seems only break in javascript, don't create not procedure.

  Momentics you need to open a "QNX Outlook Information System" [window-> open point of view]

  Right-click on the target and select "start SSH session".

  In this SSH session, after logging in, type ' slog2info w | grep ' 9000' '

  Look for a message on the QML problem.

• How low-level format using the code debugging?

  original title: how to low-level format using the debug code? can someone give a code

  How low-level format using the code debugging? can someone give a code

  Hi microcontrol.

  ·          What is the number and the model of the hard disk that you use?

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

  The Microsoft article below may help if you use a disk Western Digital or Seagate.

  Using DEBUG to start formatting

  http://support.Microsoft.com/kb/60089

  I hope this helps!

  Halima S - Microsoft technical support.

• Expose properties c ++ to qml

  While browsing the BB developer documentation, I came across this example. Here, I do not specifically code qml.

  Button {
              id: myButton
              text: "Increase the value"
              onClicked: {
                  myCppObject.valueChanged.connect(myButton.onCppValueChanged);
                  myCppObject.value = myCppObject.value + 1;
              }
              function onCppValueChanged(val) {                console.debug(val);
                  myButton.text = "Set value to " + (val + 1);
              }
          }
  

  First of all, in code above

  1. signal "valueChanged" accept a single parameter and here I get no notion of 'connect '.
  2. function 'onCppValueChanged' is called worthless, how the hell it is possible to pass. And also if it is possible in javascript that how the value of the 'val' becomes 21 I tried printing the value to the console is 21. Please clarify my questions ASAP

  either connect feature connects signal which is defined in CPC (valueChanged (int)) connects to our housing located in our qml (onCppValueChanged (val))

  Am I wrong?

• What is correnct how to use GroupDataModel custom inside a qml?

  Hello.

  Got this code qml

      Tab {
          title: qsTr("Friends")
          content: NavigationPane {
              Page {
                  content: ListView {
                      id: friendsView
                          dataModel: friendsModel
                      listItemComponents: [
                          ListItemComponent {
                              type: "header"
                              StandardListItem {
                                  title: friendsModel.header
                              }
                          },
                          ListItemComponent {
                              type: "item"
                              StandardListItem {
                                  title: friendsModel.first_name
                                  description: friendsModel.last_name
                              }
                          }
                      ]
                  }
                  onCreationCompleted: {
                    if (friendsModel){
                      console.log("Here is non 0 model")
  
                    }
                  }
              }
  
          }
      }
  

  And this C++ code

      FriendsApiService* friendsApi = new FriendsApiService();
      friendsApi->getFriendsList();
  
      QmlDocument *qml = QmlDocument::create("asset:///main.qml")
      .parent(this);
  
      qml->setContextProperty("friendsModel", friendsApi);
  
      AbstractPane *root = qml->createRootObject();
  
      app->setScene(root);
  

  It's interesting because I see my virtual functions in groupdatamodel (childcount() and data()), debugging messages

  but then was an error in the console: "Reference error cannot find varialable friendsModel.

  So as a result, I got 5 (cause my model data has 5 rows) empty strings in my ListView.

  In your StandardListItem you use ListItemData.first_name, not friendsModel