Decode the statement inside the box

Similar Questions

• How to make the State "out-of-box' again on my Satellite L653-12J

  Hello

  I have been in charge of research and following the instructions but all have failed.
  I'm selling my Toshiba Satellite computer laptop L653-12J with Windows 7 and I would like to clean the hard drive of all the data added to have it back to its out of the box state.

  Please advise me how?
  Thanks and regards,

  Kamal

  Hello Kamal

  How to install the recovery image, which you can read on follow Toshiba document -.
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  It works for you?

• How can I reset my R7000 in the State in which I out took it of the box?

  How can I reset my R7000 in the State in which I out took it of the box? Why am I asking? The latest version of the firmware has destroyed the connectivity and performance of my router. I'll have to deal with the devices that can not connect, devices that fall, extremely poor performance, etc. It's just a disaster.

  I've been with Netgear 5-6 years and had to do something last night, I have never had to do before - I had to go back to an earlier version of the firmware. Honestly, very little worked well. The previous version of the software has a few hiccups here and there, but the new version is just a nightmare.

  Now that I have applied even if an earlier version of the firmware, I can still see some of the latest options which were not there before. I have taken note that the firmware was now the prior publication, but the GUI is still the current version.

  Just to give a time frame on my Nexus 5 running 802.11ac, prior to the current version, I could peg 90Mbps +. Since the new version, the best I can do standing right next to the router is 24Mpbs +. Even after the restoration of the previous firmware, the speed is always the same.

  So, I want to return the router to the shape that when I took it out of the box, apply the previous firmware and reset up if necessary. I want to just my router back prior to the most recent release that destroyed. Once again, that the release had a few hiccups, but it was still usable.

  The 30-30-30 reset method works on most routers out there, but not on the R7000...
  The correct way to reset your R7000 at the exit of the State of the box is...

  Download the original version of Netgear R7000 Support HP http://downloadcenter.netgear.com/en/product/R7000(Firmware Version 1.0.0.96)

  Reset and flash back of any Stockfirmware on the original Stockfirmware:

  Power on the router
  Wait a few seconds
  Press Reset for 5-8 seconds max! **
  connect to 192.168.1.1
  Flash the original FW
  now that the router restarts
  Wait a few seconds
  Press Reset for 5-8 seconds max! **

  * After each reboot, the first login on StockFW screen should show something like "refresh the settings or the settings of loading.

  Now, it's as out of the Box.

  Reset and flash back to any DD - WRT FW to Stockfirmware initial:

  Power on the router
  Wait a few seconds
  Telnet to the router
  Run the commands:
  'clear the NVRAM '.
  'reboot '.
  Wait a few seconds
  connect to 192.168.1.1
  Flash the original Stockfirmware through the Administration tab (if the upgrade fails and the site is not available, try another browser such as Firefox, chrome, safari)
  now that the router restarts
  Wait a few seconds
  Press Reset for 5-8 seconds max! **

  * After each reboot, the first login on StockFW screen should show something like "refresh the settings or the settings of loading.

  Now, it's as out of the Box.

  I have reflashed several R7000 to initial Stockfirmware as the last FW with Beamforming was not stable enough after several days/weeks testing... The FW showed massive connection drops after 24 hours and only a reboot of the router fixed it (tested on 3 x R7000)

  The connection has dropped from 1300 to 66-256 after several hours...-. -.

  Now I'm waiting a new FW version with corrections of Wifi of Netgear.

• Restore the computer to the State of the box: requires media

  Original title: Bob Mueller

  I can't restore my computer out of the box state. He asks media, can someone help me?

  New computers don't usually come with a CD (recovery media), and instead they need to be your own.  If you have never made a recovery disk (or CD), you can get the support of the manufacturer of the computer.  Dell has been kind enough to me a ship by FedEx overnight, but costs Sony $ 60 for a recovery CD.  The manufacturer of your may vary.

• Limited edition of Halo 4, metal case damaged inside the box.

  I was told by Xbox support to publish on this site... even if my question is not related to all topics here...

  I pre-ordered the limited edition Halo 4 of Amazon.ca and just got yesterday. The metal game case that comes inside the box has been damaged. There are scratches and missing paint on the case, and the ink on the logo of the UNSC is stained. It is clearly unacceptable for a game for $100... it does not go through QA, looks as they took out of the garbage and just threw it into the box.

  I contacted Xbox support, and they said that they cannot replace parts such as "cross game", so I was told that my best bet was to contact Amazon. So I called Amazon, and they told me that they were sold out of Halo 4 Limited Editions and my only option was to return the game for a full refund... but that does not help me. I tired to communicate with the people that make the game (343 Industries), but they do not have these coordinates. So... my only options are simply return it for a full refund, or go on Ebay and buy another for $130 - $175. It's ridiculous, you think that with such a big like Halo game that there might be a service customer out there, but not... I just dropped over $ 100 to do this, the manufacturer could even be bothered and Xbox support just shrugs and says "Oh well..." Sorry "... as this fact it is ok.

  I have all of Halo collector's editions... Halo 2 collectors, legendary Halo 3, Halo Reach legendary, and now Halo 4 Limited... All I want is what I paid for, and after WHAT I bought, I think I won for my Stinking full face, replaced by another which should have been in the area.

  One of you have the Contact information for ANYONE that can help me find a replacement for this game box?

  Hello

  As Brian said you work with Amazon.

  =====================================================

  The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
  If you need to contact them.

  XBox - Support
  http://support.Xbox.com/en-us/pages/default.aspx

  XBox - Contact us (support)
  http://support.Xbox.com/en-us/contact-us

  XBox - Support Forums - and my XBox (top-right)
  http://forums.Xbox.com/

  Xbox technical support phone number

  • Toll-free: (800) 4MY-XBOX or (800) 469-9269

  Opening hours: 600 PM 2200 h / Pacific / daily

  International (direct line in the U.S.): 425-635-7180

  XBox LIVE - Service status
  http://support.Xbox.com/en-us/Xbox-Live-status

  Manage the XBox Live account
  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

  XBox Live Sign-in problems
  http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Toshiba satellite L755-S5170 how to recover out of the box state

  How to get out of the box state. I know that it will not be that difficult, I had products HP which makes this task easier!

  Moved to windows

  Hello

  Regarding your question, it is out of our reach and you can contact your computer manufacturer.

  Thank you.

• Restore to factory state out of the box. Can I install all updates from Microsoft using Windows update or can I install antivirus first before to connect to internet?

  Restore to factory state out of the box. Can I install all updates from Microsoft using Windows update or can I install antivirus first before to connect to internet?

  Currently Windows Vista Home Premium SP1 x 86 (no patches since 2008). Currently, it has no AV and has not been connected to the internet yet. It will be behind a router.

  I had to redo the factory already reset after be connected to the net for 20 minutes and then a bunch of programs kept crashing saying Data Execution Prevention had to close the program StackHash and BEX error when executing update for HP drivers.

  Maybe I installed Kaspersky first next time?

  What should I do?

  Thank you!

  No problem. Install the updates. You can install the anti-virus later.

  Just don't start browsing the inet by updating.

• I bought a Windows 7 Home Premium software on disk, however my product inside the box key does not work. Any help please?

  I have recently reinstalled windows 7 Home premium from the disk after deleting the existing partition.  During installation, I entered the key of product inside the box, but I get a message saying that this key cannot be used to activate wondows on this computer.
  Any help please?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I bought Lightroom 4 CD, but lack a CD-ROM in my ultrabook. Is there a download for Lightroom 4? Can I use the serial number inside the box to Lightroom 4.1?

  I bought Lightroom 4 as a CD, but lack a CD-ROM in my ultrabook. Is the download for Lightroom 4 still available? Can I use the serial number inside the box to Lightroom 4.1?

  Hello

  You can access the following link to download the Setup program for Lightroom 4.

  Adobe - Lightroom: For Windows: Adobe Photoshop Lightroom 4.4

  Thank you.

• How to set the value of the box check the plug-in in session state using a DA

  I want to click on the box (plug version) and set (Y or N) in session state without submitting the page.  Is it possible to do it in a dynamic action? or a code in the ? The HTML Form element attributes

  I tried the code proposed to

  Value of session state changes checkbox without submitting

  using AJAX, but can't make it work.

  I also tried the following code, but doesn't seem to work for checkboxes.

  <script language="JavaScript" type="text/javascript">
  function f_setItem (pItem)
  { 
  //alert('running fsetItem');
    var get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=dummy',&APP_PAGE_ID.);
    get.add(pItem,$x(pItem).value)
    gReturn = get.get();
    get = null;
  }
  </script>
  

  More modern solutions using a DA?

  Should I use an event 'onCheck' or 'onchange '?

  Thanks in advance

  PaulP

  APEX V4.2.3

  DB EA 11.2

  APEX listener V2.0.5.287.04.27

  13 blue-gray theme

  IE9.0.8112

  FF26.0

  Paul, in fact, you can use a dynamic Action.

  Say your question change event, say P1_CHECKBOX.

  So here's the clincher.

  Action: execute the PL/SQL Code

  PL/SQL code:

  Start

  null;

  end;

  Page to submit items: P1_CHECKBOX

  That's all.

  Read the help on the elements of Page to submit

  «Specify a list separated by commas of the elements of the page that will be submitted to the server and therefore available for use in your 'code PL/SQL'.»

  Kofi

• I have photoshop elements 8, but lost the sleeve on the disk.  Where can I find the redemption code?  I've looked everywhere on the box and in the literature on the inside.

  I have photoshop elements 8, but lost the sleeve on the disk.  Where can I find the redemption code?  I've looked everywhere on the box and in the literature on the inside.

  Here is an Adobe Help file on the issue: quickly find your serial number

  
  

  Moved from Photoshop General Discussion for Download, installation, setting up

• FancyBox - How can I change the position of the title to the INSIDE of the box?

  I know that this may not be the place to ask this question involves the jQuery and Fancybox, but I'm uncomfortable with the Dreamweaver Forum so thought I would ask. Earlier, I started working on this project for an artist and thought that FancyBox would be a good way to present his work. I don't know much about jQuery and Fancybox, but managed to make it work, which is not particularly difficult. That is, how can I change the position of the TITLE by default out of the BOX on the INSIDE of the box. I played with the CSS a bit, ask about these things called aid, tried to put a code of jQuery in the head section, but nothing helped.

  Here is a link to the page (forgive the look, still under development): www.watercolorsplus.com/New/babyFootprints2.html

  There are still a few errors in the tag, as can be seen here [Valid] Markup Validation of http://www.watercolorsplus.com/New/babyFootprints2.html - W3C Markup Validator

  Fix the above errors first in particular the absence of citations which surround the fancybox (x 4) as in

  a class = """"" " fancybox

  When the above errors were fixed, add the part highlighted in the constructor.

  {$(document) .ready (function ()}

  $(".fancybox").fancybox ({}

  aid: {}

  Title: {}

  type: 'inside '.

  },

  overlay: {}

  CSS: {}

  'background': 'rgba (255,255,255,0.5).

  }

  }

  }

  });

  });

• Alignment inside the box of the bug.

  I don't know if it is a bug or by design, but I've done a text box with a background layer that strecthes across the page.  The text aligns in the Middle ok, but it seems to be up to high in the box itself (not centered).  I wasted for always with this try to look right, but then, he realizes that when you look in a browser it is aligned perfectly.  So basically, that it does not properly aligned in MUSE, but works fine in the browser.  This isn't a huge deal, but given THAT MUSE is a WYSIWYG editor, I'd love to see this problem somehow.

  Here is a picture of what I'm talking about the where it says OWB holsters you can see that the text is not aligned to the Center vertically.  It looks good, but if you look at it here.

  Vertical alignment of text in a frame is surprisingly difficult to achieve reliable HTML in browsers for all the different scenarios where the text can be used in Muse. I think we will make the investment to apply it at some point, but it is not their yet.

  Adjust the positioning of text of the form does not work in the States if you use paragraph withdrawals (due to limitations about how these attributes are propagated between the States of forms). However, you can achieve the same effect by setting a left Padding value in the spacing Panel.

  

• Color inside the box of the item

  Is there a way to change the color inside the fiield of entry? This field could be date picker, list selection, text field or text box.
  
  Basically, asked me to change the color inside the box, not the box background color when it is a required field. This must be done in addition to the ' *' which indicates a required field.
  
  If it's important, I use the theme 15 and two legs level.
  
  Thank you
  Yivon

  Is there a way to change the color inside the fiield of entry?

  Yes, easy to achieve simply by setting the property color CSS to the required value. You could get the text in blue for a single item by entering style = "" color: Blue " in the attributes of elements in HTML form for the item." But you probably want to be specifying this kind of thing in the world, using a style sheet provided by the template page...

  Asked me to change the color inside the box, not the box background color when it is a required field.

  This looks much more delicate. APEX does not have anything that makes the 'required field', with respect to the generated HTML, inherently "required." There is, unfortunately, no automatically applied to the element of class "needed". It is 'necessary' because its (somewhat perverse) label there is a 'compulsory' class and there is a validation performed on presentation requiring its value is not to be null. It looks like there is not nothing output by the engine of the form which could be used as a CSS selector to style rules apply to elements, and form elements is not customizable models.

  The only "global" approach, I can see (certainly at this late hour) would be an exercise in Javascript to find labels required (not particularly trivial in itself, as the required class may be on an element that is framed by the label element, not on the label itself), get the ID of their components of the subject of the attributes to apply the desired for this item class.

  You could do this manually by entering class = "required-item" in the attributes of elements in HTML form for each item and by applying the color required in a style sheet.

• Can a checkbox State (true/false) another State (different) check box in the control?

  Hello

  I am trying to find the answer in the internet and here in the support forums, but so far without success.

  So, I was wondering is it possible to make a CheckBox control (checked/unchecked) other (different) box in the same table.

  Lets say I have a list of items to take on the assignment in the field (in separate lines) in my checklist. Some of these items will be check together so that both can work as one.

  For example - gas generator and fuel tank:

  You can check the box next to "gas tank" if you need to take only,

  But if you check 'gas generator' numbers should automatically check the "fuel tank" so I remember to take it as well to the generator.

  So, please help me with the formula if there is possibility to do so in the last app (OSX) number. Thank you.

  Hi Shkacas,

  Perhaps you might consider to penetrate your activities field trip.

  

  The elements required for each activity are in another table. You can 'hide' this table by moving (copy / paste) to another sheet. The formulas will adjust automatically.

  Formula in the Input Table C2 (and fill down)

  = IF (B2, CONCATENATE (Required::B2 elements ",", Required::C2, ",", elements Required::D2, ",", elements Required::E2),' ')

  Ignore the additional decimals in the result. These are refills for empty cells in the table of the required elements.

  Another example where insГЁrent the check boxes unchecked "" (NULL, empty)

  

  Kind regards

  Ian.