Decompile the files created in Authorware

Similar Questions

• What format are the files created by the scanner deskjet 4625?

  I want to buy the Deskjet 4625 CZ284C. but I'm not in the specification of what is the format of the files created by the scanner.

  I need the files in. JPG format and the option so that it takes. PDF format...

  need a quick answer, thanks, Zvika

  Hello

  You can scan to PDF and text can be added to documents, JPG and TIF for images/photos. Please see the following book:

  http://h10032.www1.HP.com/CTG/manual/c03345663.PDF

  Kind regards.

• Where are the files created in Microsoft Visual C++ 2005 Setup logs?

  Hello

  Where are the installation saves the files created in Microsoft Visual C++ 2005? I checked the temporary directory and couldn't find the logs for Microsoft Visual C++ 2008.

  Thank you!

  Hi EugeneWhitlock,

  The installation files of all installed programs stored in the C:\Program Files location.

  I would also recommend to post your question in the MSDN forum:

  http://social.msdn.Microsoft.com/forums/da-DK/vcgeneral/threads

  Hope the helps of information.

• I accidentally loaded a .iso file on my PC and can not get rid of it. When I try to delete the file it says that the file is opened by the system. Also the file created 3 virtual drives like E:, F: and G: __Please let me know how I can remove this .iso

  I accidentally loaded a .iso file on my PC and can not get rid of it.  When I try to delete the file it says that the file is opened by the system.  Also the file created 3 virtual drives like E:, F: and G:
  Please let me know how I can remove this .iso file.

  Try Safe Mode. Repeatedly press the F8 key as the computer starts getting the menu diagnosis. Use the arrow key to select Mode without failure. MS - MVP - Elephant Boy computers - don't panic!

• I have 9, 1 pages in PDF files that are accessible and the need to combine them into 1 PDF file.  I tried adding, adding and the combine process of PDF files. The file created does not take my changes. The file created is partially accessible, but I have

  I have 9, 1 pages in PDF files that are accessible and the need to combine them into 1 PDF file.  I tried adding, adding and the combine process of PDF files. The file created does not take my changes. The file created is partially accessible, but I have to re - the problems that I had fixed in the unique files. I need suggestions on what else can be done, if any. Using Acrobat pro XI.

  By habit, I tend to combine PDF files in the Page pane by right-clicking thumbnails then 'Insert of Pages'-> 'From File'. For me, this preserves the tags of these two documents, although the tags may have to be moved to the correct location (if I remember correctly the tags for inserted pages are put at the end of the tag structure, regardless of where the pages are inserted), if I put the tags in the document to insert into a container as a Section tag It makes the process easier. Travel set of tags in the right place is the only re-fixing that I remember having to do. What behavior you encounter?

  a 'C' student

• All of a sudden Outlook Express cannot find the files created by the method of attachment.

  Outlook Express cannot find the newly created files to attach. The files are there in My Documents and Outlook Express can still see all the old files, but each new file for the last month is not seen and cannot be attached. I even typed in the name of the file and it says can not find the file of the same name. I send you the files now through 'Send it' a service online, but complicated to use another program. I checked the 'views' and they seem ok. Help, please!

  It is a long shot, but try it in a new identity.

  File | Identity | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

  How to create and use identities in Outlook Express
  http://support.Microsoft.com/?kbid=209169

  Bruce Hagen ~ MS - MVP [Mail]

• Copy the files created after a certain date

  How can I copy files that were created after a certain date?

  Thank you

  Hello

  Start - computer or Windows Explorer, you can navigate to a specific folder, then right-click on
  name (or) control position - MORE - Date created column - OK - the box, and then click the Date
  Created column that will align the content of the folder by date ascending or descending as you wish
  (click again to change the order). Then you can click on the 1st file in a sequence and hold SHIFT key and
  Click on the last file in the sequence you want - this will highlight the sequence - then right-click -.
  where in the region of high-lighted and the COPY - navigate to where you want to copy and then right-click
  on paste. To copy a group of files not in a sequence, hold down the CTRL key and click on the ones you want
  COPY that will highlight the files - right-click anywhere in the region high-lit - and then COPY
  Navigate to where you want to copy and click straight on and PASTE.

  --------------------------------

  You can search for files created after a certain date.

  Tips for finding files
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-finding-files

  How to use advanced search in Vista Options
  http://www.Vistax64.com/tutorials/75451-advanced-search.html

  ----------------------------------------------------------

  Win Key F opens advanced search

  Searching in Windows Vista, part 1
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-1-secrets-of-the-search-box

  Part 2
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-2-Start-menu-and-control-panel-search-tips

  Part 3
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-3-using-advanced-search-for-those-hard-to-find-files

  I hope this helps.

  Rob Brown - MS MVP: Bike - Mark Twain said it right.

• I can't open the files created by Microsoft Works. I have windows 7 Professional installed and xp

  I have files dating back to 1994, that were created by using Microsoft Works.  I was able to convert all the older spread sheet files on my old computer that was not recently.  Microsoft XP was installed with Microsoft Office 2007, on my old computer.  I saved the original files, but cannot open them on my new computer, which also contains Microsoft Office 2010.  Are there programs of conversion which converts files more ancient works in Word and XLR 2010 formats?

  See http://www.microsoft.com/en-gb/download/details.aspx?id=12 and http://www.microsoft.com/en-gb/download/details.aspx?id=7264.

  Also, the last point of http://www.computerhope.com/download/updates.htm, but does not work with Office 2000.

  OpenOffice http://www.openoffice.org/ and/or LibreOffice http://www.libreoffice.org/ may be able to open and convert the files. Try an older version if the versions cannot open files.

• the name of the file created in variable

  using oracle 11.2.0.3.0

  I have a procedure that creates a CSV on my server. It works perfectly. My question is how to get the file name once the file has been created, and put it into a variable in the same procedure.

  create or replace

  PROCEDURE 'CSV_GEN' AS

  v_wK varchar2 (30);

  BEGIN

  RUN IMMEDIATELY "ALTER SESSION SET NLS_DATE_FORMAT =" YYYY-MM-DD HH: MI: SS AM "';"

  SELECT

  Replace(PERIOD_NAME, ' ', '_') IN v_wK

  OF TIME_WEEK_V

  WHERE SYSDATE-7 BETWEEN PERIOD_START AND PERIOD_END and rownum = 1;

  GEN_CSV_FILE

  (

  "SELECT * FROM WEEKLY_V',

  "my_FILES."

  "MY_DOCS" |  '_' || v_wK | '. CSV'

  );

  -so now I have created the file, and it has a name. How can I get this name in a variable, here.

  EXCEPTION

  WHILE OTHERS THEN

  LOG_ERROR();

  COMMIT;

  LIFT;

  END;

  Thanks for any help.

  Hello

  Is that what you want?

  PROCEDURE 'CSV_GEN' AS
  v_wK varchar2 (30);
      name varchar2 (50);                          -* ADDED *.
  BEGIN
  RUN IMMEDIATELY "ALTER SESSION SET NLS_DATE_FORMAT =" YYYY-MM-DD HH: MI: SS AM "';"

  SELECT
  Replace(PERIOD_NAME, ' ', '_') IN v_wK
  OF TIME_WEEK_V
  WHERE SYSDATE-7 BETWEEN PERIOD_START AND PERIOD_END and rownum = 1;
   
    filename: = "MY_DOCS" |  '_' || v_wK | '. CSV';    -* ADDED *.

  GEN_CSV_FILE
  (
  "SELECT * FROM WEEKLY_V',
  "my_FILES."
  the file name-* CHANGED *.
   );

  EXCEPTION
  WHILE OTHERS THEN
  LOG_ERROR();
  COMMIT;
  LIFT;
  END;

• Print in the file creates files that I can not open

  I feel in a file, and the file suffix is 'pdn' not 'pdf '. Then, I'm unable to open the file, an error message.

  In addition, when I create the PDF file on the Adobe Web site, about 50% of the time the original layout of the elements of text and image are scrambled around on the pdf version.

  Help!

  I pay every month for a service that was 50% functional!

  Thank you Sara for your entry. I found the function "save as pdf" and

  which works great!

• Download the file created from BLOB (as opposed to open in the browser)

  Hello, everyone.

  This project is really pushing me to become familiar with many functions, that I have never worked with before.

  The question this time:

  If I have a database table that contains the files (and these may be, PDF, TXT, DOC, XLS, or PPT) and want to allow a user to download and save a particular file (as opposed to opening the file in the browser), how can I get it?

  If the file exists on the server, which would be quite simple.  But if it is created on the fly via BLOB data?

  V/r,

  ^_^

  Yes, assuming that the BLOB is in the right binary format.  Like this:

• Open the file created on Mac crashes on Windows

  Same version of first CC and it is a very small project.

  Closer to you, I do open was important as a new project, but when I tried to open the timeline, the accident occurs. I copied the files on usb, HDD external and then copied on my local disk. I deleted all the files in cache and then received the "Missing Renderer" message, but it still crashes. It's something in the timeline panel. But what? I can take the same file to a MAC and open it without problem.

  Hi Brucel,

  Same version of first CC and it is a very small project.

  Closer to you, I do open was important as a new project, but when I tried to open the timeline, the accident occurs. I copied the files on usb, HDD external and then copied on my local disk. I deleted all the files in cache and then received the "Missing Renderer" message, but it still crashes. It's something in the timeline panel. But what? I can take the same file to a MAC and open it without problem.

  Import this file into a new Premiere Pro project.

  But before you open the calendar, please change video renderer only in software mode.

  Click file > project settings > General and change of video rendering "Software Only Mode" and delete previews

  Thank you

  Ilyes Singh

• Location of the file created by the APEXExport utility

  Greetings,
  
  I did experiments with the APEXExport utility in a Unix environment. I work for export and it creates the SQL export file in the current working directory. What I want to do, it's the SQL file that is created in one directory other than the current one.
  
  The directory where the export utility is here:
  

  /u01/apex402/apex/utilities

  With this as my current directory I have run this command, and all works well.
  

  java oracle/apex/APEXExport -db candy.us.oracle.com:1521:ORCL -user scott -password tiger -applicationid 31500

  If I move to another directory and run a command like this, it does not work.
  

  java /u01/apex402/apex/utilities/oracle/apex/APEXExport -db candy.us.oracle.com:1521:ORCL -user scott -password tiger -applicationid 31500

  Any help would be greatly appreciated.
  
  Thank you
  
  Larry

  Hello Larry,.

  the problem is the namespace Java. To find the class, it must be in the appropriate directory. You can move or copy the oracle to any other location directory and use the same call here. I did something different, as I don't like to copy things: I created a jar file and added to my classpath. To do this on your machine, run the following commands

  cd /u01/apex402/apex/utilities
  jar cf APEXExport.jar oracle/
  export CLASSPATH=$CLASSPATH:/u01/apex402/apex/utilities/APEXExport.jar
  

  Of course, you can move or copy APEXExport.jar to a different directory, for example / usr/local/lib + and include this directory in your CLASSPATH.
  From this moment, you can call

  java oracle.apex.APEXExport -db candy.us.oracle.com:1521:ORCL -user scott -password tiger -applicationid 31500
  

  of any directory.

  -Udo

• The file created from web page margins

  Acrobat X Pro

  When this version of Acrobat creates a file for conversion of a web page, the margins are all false--they are too close to the edge of the page - and there seems to be no way to set preferences for what should be the margins, or the size of the page.

  I've used Acrobat since version 4 and don't remember not thios going on before.  This is particularly annoying when you try to mount a collection of pages more than a webpage, as the Append function ignores the margins for the previous pages.  I have to print every page in my browser PDF format, save each individual file and then merge them into a single file.

  In creating a PDF from Web Page dialog, click the settings button. Click the Layout tab. You can change the margins and the size of the page here.

• Photoshop CS5 crashes when you open the file/create files

  I can load CS5 and its fine. I then go open or create a file and it just hangs.

  Can someone help me please

  I really need photoshop for my photography

  See you soon

  Lunty

  Photoshop uses OpenGL to some things that are not so you turn it off, but most of the time Photoshop works perfectly.  You will miss things include:

  • ALT-right click and drag the mouse to change the size of Brush/hardness show you a preview of your brush size/toughness, just an overview.
  • Good zoom and pan.
  • Some of the extended edition 3D features.
  • Some improvements in performance on the screen.

  Adobe has done a great job to do almost all work Photoshop well without OpenGL, but I encourage you to visit the following site and download the latest video drivers for your card.  We can clear up all the problems of Photoshop and, possibly, others you don't know that you still have.

  http://www.AMD.com/us/pages/AMDHomePage.aspx (note the "Download drivers" section at the top right).

  -Christmas