Default log time

Hello

Can you please share up to how many days, ACS server ver 4.2 record newspapers in the local computer by default?

Thank you

Hello

Go to acs > system configuration > control service > manage directory

There is no specific time, but you can configure the options manage under directory.

For more information, see the following link:

http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/SCBasic.html#wp234785

Tags: Cisco Security

Similar Questions

  • This means Firefox will not entirely default until I put it by default 8 times?

    his old waterfox photo, I use it because same thing is with firefox
    http://i.stack.imgur.com/7UV6C.jpg
    This means I have the half mark by default 8 times until he became by default? If so waterfox spoil firefox for good, until windows is reinstalled, but to watrfox stuff stood at PC somewhere do PC in part take firefox as waterfox, & I mean, in part, some parts of firefox are identified as waterfox? It's just in past there weren't things like on this picture, despite the fact that it behaves also like cause of default browser he asks not the wrong default time value, I opened the Fox, he seems to be default

    Hi Sugram22, thanks for this screenshot:

    https://FUD.community.Services.support.Microsoft.com/FUD/FileDownloadHandler.ashx?FID=02949e18-99aa-4bda-a93a-868153f803ad

    If you assign Firefox to manage these types of file 8/protocols, it 'glue' or does it come undone again?

  • set the default recording time in windows sound recorder

    Looking for a way to increase the default value to the recording of the sounds found in XP home recorder.  There is no documentation that I can find to the configuration

    Hello

    In the default recorder recording time is 60 seconds. There is a solution to increase the maximum recording time. Follow the steps mentioned below:

    Step 1:
    a. utility start Sound recorder.
    b. click on save and then Sound Recorder run for 60 seconds.
    c. once the sound recorder to stop recording, click Save as on the file menu, and name the file Blank.wav.
    d. in order to increase the maximum duration of recording in sound recorder, click Insert a file in the Edit menu, and then insert the Blank.wav file saved in step 3. When you do this,
    the maximum recording time is increased by 60 seconds. You can repeat this step once for each additional minute recording that you want to add. For example, for 5 minutes
    recording time, insert the Blank.wav file five times.

    Step 2:
    To make the tape recorder automatically use the extended length of the recording time:
    a. Click Start and then click Open.
    b. double-click the programs folder.
    c. double-click the Accessories folder.
    d. double-click the multimedia file or entertainment.
    e. right - click sound recorder and then click Properties.
    f. click on the shortcut tab.
    g. in the target box, press END, press the SPACEBAR and type the location of the file Blank.wav.

    For example, if the target is 'C:\Windows\sndrec32.exe', and the location of the Blank.wav file isC:\Blank.wav, the new line in the target box is "C:\Windows\sndrec32.exe C:\Blank.wav"

    The next time that you start the tape recorder, the Blank.wav file opens automatically. After you save your new .wav file, you can click on remove after the current Position in the Edit menu for
    Remove the extra space in the file.

    NOTE: when you have finished recording and editing of your new .wav file, save the file with a new file name.

    Kind regards
    Afzal Taher-Microsoft Support.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Default picture time

    I wanted to add a batch of photos. However, the time that each image is displayed by default is 6 seconds. Rather than set the time for each of them, there is a way to set the whole lot, at a specific time, in addition to the same transition?

    Thank you

    As Ann, said in the menu:

    Edit > Preferences > General

  • Default text, Times New Roman

    10 window

    In the new animate CC (replacement Flash Pro CC), whenever I click on a text frame, the text in all of the default framework is Times New Roman. Although I put it to a built-in police again and again, it is the entire text of the unincorporated The Times New Roman version block. The original version of the embedded font is available in the system. The text is a project started in Flash Pro CC 2015. Thinking it is maybe a problem of sorting a created Flash project, I created new blocks of text in a new project Animate, same problem. I have reset the prefs in holding the alt + ctrl + shift keys at startup. This seems to be some sort of bug. Anyone seeing this too? Is there a setting some part that I missed? Insight is appreciated.

    Thank you, Jon

    Hi Jon,

    We are aware of this problem and that you're tracking internally. It seems to happen when you try to resize a text box that uses an embedded font.

    We will update as soon as we get a fix on it. As a solution for the time being, you can use the W & H IP commands to resize the text window.

    Let us know if you see this happening in any other scenario as well.

    Thank you

    Mabrouk

  • Is it possible to have visible thumbnails by default every time I open a document?

    I would like to see my thumb nails every time I open a document. ? Older versions allowed this - it makes me nuts to have to go in

    view-show/hide-navigation components-thumbnails each time I open a document. Any way to set it as default view?

    ... But you can't apply it by default to any file that you open, if that's what you mean.

  • Log time GPS, position, speed

    Hello

    I use the read time gps, position, velocity.vi and now I want to save this data in a text file or a spreadsheet. Is there a simple way to do this? I tried with write in the file of the measurement, but this handles dynamic data and no stamp string or time.

    Thank you

  • fields reset by default every time

    I know there are two ways to solve this problem, but I want the most effective.  I have a Subvi with a case inside to spill informaiton in different groups or chains.  The indicator is in the case statement.  Each case statement has an indicator and each indiciator is connected to the output of the Subvi in primary vi.

    Problem: whenever I call the Subvi it erases the data in each cluster and chain indicators.   What is an effective way to keep the indicators that are not changed deletion.


  • 4.1 WLCCA (6) - 30037, general: timer RRM no default in use (CHA)

    Hello

    I just launched WLCCA against a WLC 8.0.121.0 running

    I have the following errors:

    30037,General: Non default RRM timer in use. This is not recommended unless directed by Cisco support. Coverage Hole Interval 11a:90
    30037,General: Non default RRM timer in use. This is not recommended unless directed by Cisco support. Coverage Hole Interval 11b:90
    But what about this white paper RRM of the 1990s is the default for timer. Am I wrong? Markus

    BTW, the beta version of 4.22 is now available thanks to the correction, in case you want to test

  • Landing Page fonts in Internet Explorer default Times New Roman?

    Is anyone else noticing that the police on landing pages is failing to Times New Roman? I placed the Arial font and it works fine in Chrome and Firefox, but in IE it keeps defaulting to Times New Roman. I can change this by going to the source code of each text box and setting the font family, but it becomes monotonous. Has anyone found another solution?

    Hi Krista,

    I don't know how you are using the editor, but it seems that you can be by selecting your text and change the font size using the tools. When you do so, a tag is added to your section of text. When this is done, you select your size, but you do not specify the police. The tag that results is as follows: . Because the 'face' is not defined, default IE to the default font of the browser. So, you have a few options.

    1. When you set the size of your font in the editor, set the font as well.

    2 Add this to your CSS code snippet between the tags - font {font family: arial ;}}

    Please let me know if this solves the problem for you!

    Best,

    Brad

  • WSN NI 9792 safety 1.2: initial configuration? By default the username and password?

    Hello

    With NI WSN 1.1, using a 9792, I can click on the button set the permissions, and if none had been defined would simply ask me a new administrator password.  Now with NI WSN 1.2, when I click on the button set the permissions he takes me to the web interface of the 9792 and said "nobody is connected or you don't have permissions to view/edit users, groups, and permissions.»  When I click on the "connect" button, a box opens and asks me a username and password.  I scoured the notes version of the help files and the internet, and it seems there is NO documentation on how to set up the first name of username/password combination, or it indicates what combination of username/password default username there might be.  I also tried a brand new 9792 straight out of the box and load of 1.2 to this subject and it has the same problem.  Is there something obvious that I'm missing?  How a person initially configure security on the 9792?

    Hello, Garrett,.

    Thanks for your post!

    Looks like you're having need for information on how to find the information of your 9792 newspaper. When you use NEITHER-WSN 1.1 allowed us users to define the initial password and this is still the case for the 9791. The 9792 is a gateway OR WSN node and a target time LabVIEW Real-time. Its default log in information or lie in a (KB) Knowledge Base using LabVIEW or helping MAX. You use LabVIEW 2009 SP1 or LabVIEW 2010?

    The default name of the user and the password is the following:

    user name: admin

    password:

    KO

    By default the username and password for the newspaper in a real-time controller

    http://digital.NI.com/public.nsf/allkb/14D8257A7724BE85862577F90071B73F

    Help of LabVIEW

    Start > all programs > National Instruments > xx LabVIEW > LabVIEW help

    Then go to... Fundamentasl > working with egalitarian and target > how-to > control and configure a remote device from a Web browser

    Help MAX

    Open MAX > help > MAX Help (can also press F1 if open MAX)

    Then go to... Help MAX remote systems > LabVIEW Real-time targets Configuration > Device Configuration > logging into your system

    The help link above LabVIEW is called in 9792 under Related Documentation start guide that directs you using LabVIEW.

    NEITHER Wireless Sensor Network Getting Started Guide

    http://www.NI.com/PDF/manuals/372781c.PDF

    Is the information you were looking for? Please indicate if there is something else we can do.

    See you soon

    Corby

    WSN PES OF R & D

  • error when reading flat file of external table... "ORA-01849: time must be between 1 and 12"

    My question is - is it possible for me to fix this error at the level of external table definition? Please advice

    Here is the data file I am trying to download...

    KSEA | 08-10 - 2015-17.00.00 | 83.000000 | 32.000000 | 5.800000

    KBFI | 2015-08-06 - 15.00.00 | 78.000000 | 35.000000 | 0.000000

    KSEA | 08-10 - 2015-11.00.00 | 73.000000 | 55.000000 | 5.800000

    KSEA | 08-08 - 2015-05.00.00 | 61.000000 | 90.000000 | 5.800000

    KBFI | 2015-08-06 - 16.00.00 | 78.000000 | 36.000000 | 5.800000

    KSEA | 2015-08-07 - 18.00.00 | 82.000000 | 31.000000 | 10.400000

    KSEA | 08-10 - 2015-00.00.00 | 65.000000 | 61.000000 | 4.600000

    KBFI | 08-08 - 2015-07.00.00 | 63.000000 | 84.000000 | 4.600000

    KSEA | 08-10 - 2015-15.00.00 | 81.000000 | 34.000000 | 8.100000

    This is the external table script

    CREATE TABLE MWATCH. MWATCH. WEATHER_EXT ".

    (

    LOCATION_SAN VARCHAR2 (120 BYTE),

    DATE OF WEATHER_DATETIME,

    NUMBER (16) TEMP.

    NUMBER (16) OF MOISTURE,

    WIND_SPEED NUMBER (16)

    )

    EXTERNAL ORGANIZATION

    (TYPE ORACLE_LOADER

    THE DEFAULT DIRECTORY METERWATCH

    ACCESS SETTINGS

    (records delimited by newline

    BadFile "METERWATCH": "weather_bad" logfile 'METERWATCH': 'weather_log '.

    fields ended by ' |' missing field values are null

    (location_san, WEATHER_DATETIME char date_format DATE mask "YYYY-mm-dd - hh.mi.ss", TEMPERATURE, MOISTURE, wind_speed)

    )

    LOCATION (METERWATCH: 'weather.dat')

    )

    REJECT LIMIT UNLIMITED

    PARALLEL (DEGREE 5 1 INSTANCES)

    NOMONITORING;

    Here is the error in the weather_bad which is generated files...

    column WEATHER_DATETIME of 55 error processing in the 1st row to the /export/home/camsdocd/meterwatch/weather.dat data file
    ORA - 01849ther_log.log 55 56 error processing column WEATHER_DATETIME in the row 1 for the /export/home/camsdocd/meterwatch/weather.dat data file
    5756 ORA - 01849ther_log.log: time must be between 1 and 12
    58column WEATHER_DATETIME 57 error during treatment number 2 for the /export/home/camsdocd/meterwatch/weather.dat data file
    59ORA-58 01849: time must be between 1 and 12
    60column WEATHER_DATETIME of 59 error processing 5th for the /export/home/camsdocd/meterwatch/weather.dat data file
    61ORA-60 01849: time must be between 1 and 12
    62column WEATHER_DATETIME of 61 error treatment in line 6 to the /export/home/camsdocd/meterwatch/weather.dat data file
    63ORA-62 01849: time must be between 1 and 12
    64column WEATHER_DATETIME of 63 error treatment in row 7 for datafile /export/home/camsdocd/meterwatch/weather.dat
    65ORA-64 01849: time must be between 1 and 12
    66column WEATHER_DATETIME of 65 error treatment 9 for the /export/home/camsdocd/meterwatch/weather.dat data file online
    67: time must be between 1 and 12

    My question is - is it possible for me to fix this error at the level of external table definition? Please advice

    Yes it is possible.  Let's not your date mask.  You're masking for 12-hour format when your data is in 24-hour format.  Change the mask of your date to be "YYYY-mm-dd-hh24. MI.ss ".  Notice the change in "BOLD".

  • Get traces of the stack on a facility completely cleaned using default db

    I tested this out and can reproduce the bug on the GA business and community releases, exact same error every time:
    java.lang.NullPointerException at org.hyperic.hq.ui.action.resource.platform.inventory.NewPlatformAction.execute(NewPlatformAction.java:107) at org.hyperic.hq.ui.action.BaseRequestProcessor.processActionPerform(BaseRequestProcessor.java:63) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236) at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196) at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432) at javax.servlet.http.HttpServlet.service(HttpServlet.java:710) at javax.servlet.http.HttpServlet.service(HttpServlet.java:803) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.hyperic.hq.ui.AuthenticationFilter.doFilter(AuthenticationFilter.java:158) to org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.hyperic.hibernate.filter.SessionFilter$ 1.run(SessionFilter.java:59) at org.hyperic.hq.hibernate.SessionManager.runInSessionInternal(SessionManager.java:79) at org.hyperic.hq.hibernate.SessionManager.runInSession(SessionManager.java:68) at org.hyperic.hibernate.filter.SessionFilter.doFilter(SessionFilter.java:57) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.tuckey.web.filters.urlrewrite.RuleChain.handleRewrite(RuleChain.java:164) at org.tuckey.web.filters.urlrewrite.RuleChain.doRules(RuleChain.java:141) at org.tuckey.web.filters.urlrewrite.UrlRewriter.processRequest(UrlRewriter.java:90) at org.tuckey.web.filters.urlrewrite.UrlRewriteFilter.doFilter(UrlRewriteFilter.java:417) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.hyperic.hq.product.servlet.filter.JMXFilter.doFilter(JMXFilter.java:324) to org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175) at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182) at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844) at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.process to org.apache.tomcat.util.net.JIoEndpoint (Http11Protocol.java:583) $(JIoEndpoint.java:446) Worker.run at java.lang.Thread.run (unknown Source)

    Server.out:
    11:55:50, 951 INFO [Server] start JBoss (MX MicroKernel)...
    11:55:50, 951 INFO [Server] release ID: [Trinity] JBoss 4.2.3.GA (build: SVNTag = JBoss_4_2_3_GA date = 200807181417)
    11:55:50, 952 Dir home INFO [Server]: /home/hyperic/server-4.1.2.1-EE/hq-engine
    11:55:50, 953 INFO [Server] home URL: file:/home/hyperic/server-4.1.2.1-EE/hq-engine/
    11:55:50, 953 INFO [Server] Patch URL: null
    11:55:50, 953 INFO [Server] server name: by default
    11:55:50, 954 INFO [Server] Server Home Dir: /home/hyperic/server-4.1.2.1-EE/hq-engine/server/default
    11:55:50, 954 INFO [Server] Server Home URL: file:/home/hyperic/server-4.1.2.1-EE/hq-engine/server/default/
    11:55:50, 954 INFO [Server] Server Log Dir: /home/hyperic/server-4.1.2.1-EE/hq-engine/server/default/log
    11:55:50, 954 INFO [Server] Server Temp Dir: /home/hyperic/server-4.1.2.1-EE/hq-engine/server/default/tmp
    11:55:50, 954 INFO [Server] root deployment Filename: jboss - service.xml
    11:55:51, 397 INFO [ServerInfo] Java version: 1.5.0_12, Sun Microsystems Inc.
    11:55:51, 397 INFO [ServerInfo] Java VM: Java hotspot Server VM 1.5.0_12 - b04, Sun Microsystems Inc.
    11:55:51, 398 [ServerInfo] OS-system INFO: Linux-2.6.24 - 24-server, i386
    11:55:52, 125 INFO [Server] initialized Core system
    11:55:57, 158 INFO [Log4jService$ URLWatchTimerTask] configuration of the URL: resources: jboss - log4j.xml

    Using the jre provided server and db. I disabled the local installation of the sun jre 1.6.
    I accepted all the default values during the installation for the two editions.
    Under Ubuntu LTS Hardy

    Yes, even if you are tracking via snmp, you will always at least an agent installed and setup to communicate with the snmp devices.  It should be on any machine that can see the HQ server and snmp devices that you want to monitor.

  • Need of the event logs - can't go back before midnight

    We have VMView 3.1.3 and we are trying to see if a user has been connected to a virtual computer sometime last week.  By default, the event log only goes back to midnight today.

    Is there anyway to extend the time of the log events or in some other way, besides the journals in the Windows real events to monitor the use of the user and of connections/disconnections?

    Thanks in advance

    I haven't seen 3 very convenient server, but pretty sure it is the same for the 3 and 4.

    If the user connected through the server of the view, you should be able to see this event recorded in your login to view server logs.

    The default log level recorded all the simple events, including opening and closing session, you can enable logging more advanced, so it displays each logon in the details, but they can grow quite quickly.

    The default location for log: C:\Documents and Settings\All Users\Application Data\VMware\VDM\logs

    also these KBs might be useful: kb. VMware com/kb/1017939, Ko. VMware .com/kb/1007905

    See you soon,.

    Andr3y

  • Compose time without date and time

    Hello

    I wonder about the best way to implement a time without date column. Here's the requirement: time without date column must be combined with a date without a time column in order to generate a date with time.

    In the example below, I have a catalogue of modules of courses with a start time specified (09:00:00). I then create instances of any of these courses on a specific date (e.g., 2012/01/01). I must then show the user the composite datetime as 09:00 01/01/2012 and possibly to check the constraints on this value.

    The date without a time is not a problem, a date with TRUNC column (date) = date seems to do the job. For the time being no date, I've considered two options:

    (1) a column from date to date fixed: TRUNC (date) = "2001/01/01 ' (or other).
    (2) a column number between 0 and 86400 with the number of seconds since the start of the day.

    What would you do? Or is there a third way?
    CREATE TABLE TEST.MODULE_1
(
  MODULE_ID     NUMBER(10),
  MODULE_NAME   VARCHAR2(30 BYTE)               NOT NULL,
  MODULE_START  DATE                            NOT NULL
)
TABLESPACE USERS
PCTUSED    0
PCTFREE    10
INITRANS   1
MAXTRANS   255
STORAGE    (
            INITIAL          64K
            MINEXTENTS       1
            MAXEXTENTS       UNLIMITED
            PCTINCREASE      0
            BUFFER_POOL      DEFAULT
           )
LOGGING 
NOCOMPRESS 
NOCACHE
NOPARALLEL
MONITORING;

CREATE TABLE TEST.MODULE_2
(
  MODULE_ID     NUMBER(10),
  MODULE_NAME   VARCHAR2(30 BYTE)               NOT NULL,
  MODULE_START  NUMBER(6)                       NOT NULL
)
TABLESPACE USERS
PCTUSED    0
PCTFREE    10
INITRANS   1
MAXTRANS   255
STORAGE    (
            INITIAL          64K
            MINEXTENTS       1
            MAXEXTENTS       UNLIMITED
            PCTINCREASE      0
            BUFFER_POOL      DEFAULT
           )
LOGGING 
NOCOMPRESS 
NOCACHE
NOPARALLEL
MONITORING;

CREATE TABLE TEST.COURSE
(
  COURSE_ID    NUMBER(10),
  MODULE_ID    NUMBER(10)                       NOT NULL,
  COURSE_DATE  DATE                             NOT NULL
)
TABLESPACE USERS
PCTUSED    0
PCTFREE    10
INITRANS   1
MAXTRANS   255
STORAGE    (
            INITIAL          64K
            MINEXTENTS       1
            MAXEXTENTS       UNLIMITED
            PCTINCREASE      0
            BUFFER_POOL      DEFAULT
           )
LOGGING 
NOCOMPRESS 
NOCACHE
NOPARALLEL
MONITORING;


ALTER TABLE TEST.MODULE_1 ADD (
  CONSTRAINT CK_MODULE_START_1
 CHECK (TRUNC(module_start) = TO_DATE('2001/01/01','yyyy/mm/dd')),
  CONSTRAINT MODULE_PK
 PRIMARY KEY
 (MODULE_ID));

ALTER TABLE TEST.MODULE_2 ADD (
  CONSTRAINT CK_MODULE_START_2
 CHECK (module_start BETWEEN 0 AND 86399),
  PRIMARY KEY
 (MODULE_ID));

ALTER TABLE TEST.COURSE ADD (
  CONSTRAINT CK_COURSE_DATE
 CHECK (TRUNC(course_date) = course_date),
  CONSTRAINT COURSE_PK
 PRIMARY KEY
 (COURSE_ID));


SET DEFINE OFF;
Insert into TEST.COURSE
   (COURSE_ID, MODULE_ID, COURSE_DATE)
 Values
   (1, 1, TO_DATE('01/01/2012 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into TEST.COURSE
   (COURSE_ID, MODULE_ID, COURSE_DATE)
 Values
   (2, 1, TO_DATE('01/02/2012 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
COMMIT;

SET DEFINE OFF;
Insert into TEST.MODULE_1
   (MODULE_ID, MODULE_NAME, MODULE_START)
 Values
   (1, 'Oracle native datatypes', TO_DATE('01/01/2001 09:00:00', 'MM/DD/YYYY HH24:MI:SS'));
COMMIT;

SET DEFINE OFF;
Insert into TEST.MODULE_2
   (MODULE_ID, MODULE_NAME, MODULE_START)
 Values
   (1, 'Oracle native datatypes', 32400);
COMMIT;

    You are looking for something like this?

    create table t ( dt date, tm interval day to second)
/
insert into t values(trunc(sysdate), interval '10' minute)
/
select * from t
/

Maybe you are looking for

  • How can I remove a device access Firefox Sync rights?

    If I have a camera paired with Sync, and this device is lost or stolen, is there a way to delete all the data synchronization of the device? This concern to synchronize all the data previously sent along with future data. In the same vein, if I chang

  • Question about warranty for Satellite L300D 242

    Hi, I bought my book of neckermann.de last year and I have saled by tariffs, the last of them was October 15, 2010, was counting my monitor Hat an accident and I didn t see nothing, I want to know if Toshiba can repair with the guarantee and the numb

  • Where can I find my product key?

    find my product key

  • Help! My computer does not start

    My computer does not start. I get a message about missing files. What can I do?

  • Unity and double network interface cards

    The unit works well with 2 network cards? Tips or tricks if you use 2 network cards? They are one of the subnets differnet 2. My voicemail ports are registered in CallManager, but on a different subnet from the CallManager is on. And this isn't the M