Log time GPS, position, speed

Similar Questions

• Time GPS, Position, Velocity.vi - error-1073807360 reading was held at node (arg 1) .vi property VISA set up a Serial Port (Instr)

  We receive information such as the Latitude and Longitude of a receiver Garmin GPS18xLVC via a serial port on our PC using LabView 7.1.  Successfully, I connected the GPS on the serial port and tested with HyperTerminal.  I tried reading GPS time, Position, Velocity.vi several times and still receive the following error message: error 1073807360 has occurred to the property node (arg 1) visa configure a Serial Port (Instr) .vi.  I think it has something to with the configuration of the VISA series under vi.  Any suggestions would be greatly appreciated.

  Thank you

  I understood the question, that I had with the time reading the GPS, the Position, the Velocity.vi.  The vi. "do not open" port com automatically and so I had to modify the NMEA GPS Subvi reading to first open the port (VISA open command) and then continue with other operations.  Once I did this it started to work very well.  I don't understand why this feature has been left out because it won't work without it.  I tested the code with a receiver Garmin 18xlvc and it seems to work fine.

• Time GPS

  Hello everyone,

  I work with a device which provide me time GPS,.

  as far as I know, it should be time since the beginning of the week...

  My question is:

  Is there a built in functions to display the time GPS in DD HH: mmS format or any other format?

  Thanks in advance,

  AJ

  Well, coming to the CVI world ( ) you can take a look at CVITime utility library functions: If your instrument returns a string representation of the time, you can use extract the individual components of the chain and pass them to the CVIAbsoluteTimeFromLocalCalendar () function, which returns the time in Format binary time of National Instruments.

  You can also use Windows SYSTEMTIME format and related functions.

  Finally, you can use MakeDateTime () to get a double representation of date and time.

• Microsoft made a habit of you personally call by phone and saying: you have malicious software on your computer? I have hooked up to two times more positive that it is a scam

  Microsoft made a habit of you personally call by phone and saying: you have malicious software on your computer? Whenever they asked me to go to my computer and go to the Control Panel, they will say to me then my serial number to confirm that it is legitimate, when I said I thought it was a scam, they became very angry, both times, it was a Pakistani
  I have hooked up to two times more positive that it is a scam

  Microsoft made a habit of you personally call by phone and saying: you have malicious software on your computer? Whenever they asked me to go to my computer and go to the Control Panel, they will say to me then my serial number to confirm that it is legitimate, when I said I thought it was a scam, they became very angry, both times, it was a Pakistani
  I have hooked up to two times more positive that it is a scam

  You have made the right choice.

  This is a complete scam and one that has become very common these days. Microsoft never does such calls. Don't think anything such a caller said, do nothing that he tells you to do and hang up on him immediately.

• GPS position

  Hello friends,

  How could I get a 9300 8520 device GPS position.

  Thanks in advance

  Not sure about the 9300 but the 8520 doesn't have a chip CPS, you can not use the GPS - but you can use the cell tower.  Here are some links to help.

  http://supportforums.BlackBerry.com/T5/Java-development/location-APIs-start-to-finish/Ta-p/571949

  http://supportforums.BlackBerry.com/T5/Java-development/simple-location-API/Ta-p/1145951

• Get a current GPS position in Simulator

  Hi experts,

  I am quite new to Java of BB application development.

  The current application I have devlop requires to know the current GPS position. Normally, how developers could fix this situation? Are there classes/methods, directly available for it?

  Please help with solutions.

  Best regards,

  Year s

  Yes, you can get the current Position. Example: Latitude, Longitude, Altitude etc...

  Check this URL, it had Development Guide for GPS.

  http://NA.BlackBerry.com/eng/deliverables/1125/GPS%20and%20BlackBerry%20Maps%20Development%20Guide.p...

  You can use the Simulator to test the GPS.

  Use simulate-> GPS on Simualator.

• Get the GPS Position in a specific interval

  Hi BB-Devs,

  I m developing a BB10 application where I use the GPS location Services.

  I need to update my current position in a specific interval.

  First of all:

  In the corrugation Simulator, everything works fine. My position will be refreshed every x seconds.

  Yesterday, I deployed my application with debugging token to my Z10.

  It seems the app works.     BUT:

  When I change my position, the new position will not be updated as in the Simulator :-(

  In my console log, I see that my function is called every x seconds.

  Here is a code snippet of the function that is called in the intervall:

  function setAktPosition() {
      //First test to see that the browser supports the Geolocation API
         if (navigator.geolocation !== null)
         {
            var options;
            navigator.geolocation.getCurrentPosition(setAktPositionSuccess, setAktPositionError, options);
         }
         else {
            alert("HTML5 geolocation is not supported.");
         }
  }
  
  function setAktPositionError(error)
  {
     alert("An unexpected error occurred [" + error.code + "]: " + error.message);
  }
  
  function setAktPositionSuccess(position)
  {
     //Extract information about the users current position:
     var time = position.timestamp;
     var coordinates = position.coords;
  
     //Retrieve geographic information about the GPS fix:
     ap.valueLat = coordinates.latitude;
     ap.valueLon = coordinates.longitude;
     ap.valueAlt = coordinates.altitude;
     ap.valueSpeed = coordinates.speed;
     //var acc = coordinates.accuracy;
     //var altAcc = coordinates.altitudeAccuracy;
     //var head = coordinates.heading;
     refreshMap();
  }
  

  That's how I got to call this function in a specific interval:

  aktiv = window.setInterval("setAktPosition()", intervallInSec);
  

  However - the works of the intervall-function-call - but my application still get the top position - no update of position when changing my situation :-(

  Corsica, I did this in my config.xml file:

  
     access_location_services
  
  

  My application has requested when starting fist approvals of the location. I also checked this in the settings of the device of my Z10.

  Are there problems with the GPS location services in the webworks for BB10?

  Or is it not possible to achieve?

  I will be happy if anyone has any advice for me :-)

  Thank you very much!

  Lars.

  Try changing the options to activate enableHighAccuracy

  https://developer.BlackBerry.com/HTML5/APIs/positionoptions.html

• Time Machine wireless speed

  I have an old Time Capsule style with disk 500 GB and wireless 802.11a/b/g/n spec.  [Still works very well by plug]

  I want to save my Macbook Pro retina / 500 GB of flash memory.

  Two problems:

  1. not enough storage for backups without constant delays delete older backups.

  2. wireless speed to slow down to avoid slowing down the computer during backup operations.  [Were only periodically back up via ethernet]

  My question: will be the last TC (3.0 to / 802.11 a/b/g/n/ac) improve the wireless speed sufficiently to avoid slowing down other applications during backups?   [Note: the Signal strength is no problem - strong signal throughout my house.]

  Thanks for the tips

  My question: will be the last TC (3.0 to / 802.11 a/b/g/n/ac) improve the wireless speed sufficiently to avoid slowing down other applications during backups?

  In theory, Yes. However, nobody here can make no guarantee of what exact improvements the last TC will provide you with.

  The first generation TCs had a bad reputation when it comes to power supplies. A number of them does not have less than a year... so the fact that you had yours it would be long fantastic. Apple has not released technical details (without what is provided in the Apple Support - specifications) on what real improvements have been included with each generation, except the size of the hard drive inside.

  Fortunately, Apple plans a return policy, just in case it is not meet your performance requirements.

• Extreme slowness of local area network and Time Capsule wireless speeds

  I have a time Capsule Airport Extreme 3 G with firmware version 7.7.3 I use for lan connections / wireless and backup of all apple devices that do not use the cloud. For the last month or so sometimes I ridiculously slow speed issues that cannot be remedied with any one of them that I have tried. Speed control on my i mac or wireless on any device in any location see accelerates it half of what I pay for. If I shoot a speed control to the back of the modem, everything is ok. If I shoot a speed check in a port on my machine Net Pro FVS318G safe with Airport extreme disconnected speeds are fine. But when the capsule is used the speed is slow. This happens not all the time. In fact this am that everything was fine, she just started about an hour or two there once again. And it normally clears up in a few hours on its own. It is like someone is inside my computer slows down I can't even do a backup on my i-phone when this happens.   I bought the thinking net machine that triple nat could help I'm not using the vpn option. I'm lost and open for suggestions?

  My mac i run El Cap v 10.11.4.

  Att Uverse 18 m 1 m

  Time capsule two years old.

  Check the speed of 1-6 m down issue when happening, 17-18 when well. done before also.

  Can you please describe your network topology?

• GPS position updated connected question

  Dear,

  I now try to get my current location

  According to instrucations here:

  https://developer.BlackBerry.com/Cascades/documentation/device_platform/location/retrieving.html

  and my post here

  http://supportforums.BlackBerry.com/T5/Cascades-development/GPS-issue/m-p/2483917#M27417

  I've solved the problem and the code works without error,

  But when I call

  bool positionUpdatedConnected = connect(src,
              SIGNAL(positionUpdated(const QGeoPositionInfo &)), this,
              SLOT(positionUpdated(const QGeoPositionInfo &)));
  

  I had

  positionUpdatedConnected  = false
  

  Can someone help me why this result?

  Thank you.

  Hello

  As Zmey pointed out in your other post, you must modify the declaration of your location of positionUpdated() in your GPs.h file. You must rework so that you do not need to specify the QtMobilitySubset namespace (as in your cpp file):

  private Q_SLOTS:
      // This slot is invoked whenever new location information are retrieved
      void positionUpdated(const QGeoPositionInfo &pos);
  

  To do this, put a using statement in your GPs.h file, which unfortunately is not always desirable. You could put

  using namespace QtMobilitySubset;
  

  But if you're worried about having "using" in your header file, you can limit the scope of what you need if you put

  using ::QtMobilitySubset::QGeoPositionInfo;
  

  These changes are necessary due to the nature of the connect() method. In my view, than it does not much more than the chain by comparing the quantities in SIGNAL() and SLOT() macros. The method parameters must match each other and how the methods are declared in their respective headers.

  Jim

• How to get the current GPS position of the BlackBerry emulator?

  Hello! all, I am writing a simple program to get the current coordinates of GPS (Latitude, Longitude) in BlackBerry.

  Criteria criteria=new Criteria();
          criteria.setHorizontalAccuracy(500);
          criteria.setVerticalAccuracy(500);
          LocationProvider locationProvider=LocationProvider.getInstance(criteria);
          Location location=locationProvider.getLocation(60);
          QualifiedCoordinates coordinates=location.getQualifiedCoordinates();
          System.out.println("Latitude : "+coordinates.getLatitude()+" Longitude : "+coordinates.getLongitude());
  

  But, I couldn't get the latitude and longitude. It returns 0 (zero) for the two coords.

  PLS, suggest me the solution.

  The 9000 Simulator has GPS simulation. In the "Simulation" of the Simulator menu, select "GPS". There is an already defined test site, you will need to select this place.

• BlackBerry Smartphones GPS - position On / Off

  My husband gave me a curve for Christmas - what a wonderful surprise!  I found this site tonight and have been check / update my options, but I have a question about the GPS option.  What is the advantage (or not) to transform my GPS location WE verses uses don't not the setting.  Is it a good thing?

  Thank you!

  -AKrubygal

  Basically light location allows your GPS search of satellites in BB Maps or Google Maps or any other GPS program. If you enable location off, you're basically turn off your GPS capabiilties. Personally I have to take advantage of Google Maps and geotagging the photos I take.

• Default log time

  Hello

  Can you please share up to how many days, ACS server ver 4.2 record newspapers in the local computer by default?

  Thank you

  Hello

  Go to acs > system configuration > control service > manage directory

  There is no specific time, but you can configure the options manage under directory.

  For more information, see the following link:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/SCBasic.html#wp234785

• create a spectrum of the order from scratch (i.e. get a fft-based on the position of the same time deductions in the sample data)

  Hello people,

  THAT THE QUESTION PERTAINS TO:

  I play on 2 parameters of a system based on the sampling time: Rotary position and vibration (accelerometer g increments).  I want to take a fft based on the post to create a spectrum of the amplitude-phase speed order in / s.  To do this, perform the following:

  1 integrate (and scale) g vibration signal in the / s (SVT Integration.vi)

  2 signal sampled vibration resample the same time at an angle similarly charged signal (ma-resample unevenly sampled input (linear interpolation) .vi)

  THE QUESTION:

  Order in which operations should be carried out, integrate then resample or vice versa?  I didn't order would be important, but using the same set of data, the results are radically different.

  OR ORDER ANALYSIS 2.0 TOOLSET:

  I have the NO order Analysis Toolset 2.0, but I could not find a way to get the speed profile generation live to work with signals of position encoder DAQmx (via pxi-6602) quadrature.  In addition, it seems that I have to specify all the commands I'm interested to watch, which I don't really know at this point (I want to see all available commands) so I decided to do my own fft based on the post to get a spectrum of the order.

  Any help is greatly appreciated.

  Chris

  The order is to integrate the time domain of first - creating a speed channel.  You now have a new channel of data.  In general I would put this in the same table of waveform with waves of acceleration time.

  Then re - sample your acceleration and/or your speed signals, and then you can calculate the spectrum of the order.

• Time code speed

  Hey, I'm putting in place a timer on a youtube video. The original video was recorded with fraps, I don't know if this will change anything unless it displays the video on a higher FPS.

  The format for the time code is btype:

  

  The time code itself runs FASTER the real time video, race allocate more quickly as shown in the following image:

  

  I would like to know how do the timer matches the speed of the video.

  Any help would be very welcome!

  Try your clip in a sequence of 30 frames per second.

  Interpret images if necessary.

  Then try the effect of TC (30)