Similar Questions

• How to change the default message for the required attribute of the entity?

  Hello
  
  I use JDeveloper 11 g 11.1.1.5
  
  Is it possible to modify a commit message by default on the attribute of the required entity? I don't want to show the user something more useful than VO and the name attribute.
  
  
  Anatolii

  Hello
  You can open the respective OS.
  Open the business rules and then select the required attribute and click the Edit option and write your custom message
  on the Management window of failure on the error message section.

  Thank you
  Sumit Yadav

• BlackBerry Smartphones mini sd default location for text messages

  Is there a way to make the mini sd the default location for the texts?

  I have AT & T and about twice a day, I get a message from the system:

  "SIM CARD FULL, please delete SMS"

  Hi and welcome to the forums!

  Here are the steps to deselect the SIM card and save SMS messages on your device.

  Please note that you cannot save on press card.

  Thank you

  Bifocals

  KB13465

  SIM card is full please delete SMS messages

• Can I put a default title and send the message for sharing links from Adobe?

  When sharing links by e-mail, is it possible to save a custom object and the default Message?

  Not at the moment, but I asked the product team to consider adding it as a feature. Thanks for the suggestion.

• How to use my default format for my signature settings also

  Hi all

  Please explain how can I use my settings to default format for my signature, too.

  For Ex:

  I use times police with 12'. I want to use the same settings of my signature so police.

  Kind regards
  Siva.

  You can include html code in the Signature text formatting. An option is to learn the desired code and enter it by hand.

  However, I would suggest you start a new message and compose your signature as if you were writing an e-mail message, but save it as an HTML file. In the account settings, you can refer to this file to provide your signature.

  If you need multiple signatures, I suggest that you look at the Signature Switch addon that allows you to select a signature file when sending.

  A useful feature of Signature Switch is that it allows you to include variants of html text and the pain of your signature. In general, there is also rude to answer a message composed in plain text with a response using HTML. Your correspondent has indicated implicitly that he prefers plain text.

  GIYF: https://support.mozilla.org/en-US/kb/signatures

• Since the installation of the new version, no e-mails arrive. When you click on Get messages it says 'Get messages for anyone '. Why can't I get new messages?

  Last weekend my son updated for Thunderbird later for me but I could not new messages - as I flew over the mouse get Messages, prior to ordering, he said 'Get messages for anybody', so my son put the older version on my computer and it has worked, until I started my computer this morning and found this new version had himself installed , and now it will not be new messages and again said 'get messages for anybody. " Unfortunately my son has 120 miles away, and even if I sent him an email, copied to myself, I was unable to receive my copy or any response to my son. Can you help me please? As I am not able to receive messages, I'll have to come back to this support page. Thank you.

  Download default messages, current account, not all accounts.

  Versions updates are often blocked by anti virus programs that are waiting for their owners to approve the new safe software.

• Impossible to change my default message font in Mail :-(

  Hello

  I'm changing the default font for my Mail message. When I access mail 'Préférences', click on 'Fonts & colours' it is said that my policy of Message is set to "Helvetica 12". When I click on the "Select" button, a pop up window which me gives access to different fonts (is this font book?). I navigate to my desired police ' 12pt Gotham Book, but there is no final don't execute button? How can I say Yes use this font?

  Don't actually say you 'yes' or need to "run" anything. When you click on the family, police or the size of the columns, you will see the change reflected in "" Message fonts: "." Then you can just close the 'fonts & colours' and the 'Preferences' windows.

• Message queued, case/default message handler?

  Hello

  I started to implement the QMH design for my application model:

  • Producer
    A state machine that implements my algorithm:
    Move actuators, send commands to a camera, settings etc.
  • Consumer
    A state machine that sends low level commands to devices according to the task at hand

  But now I have a problem:

  I would constantly check and show the positions of the actuators, as a case of default/message. Positions, different measures should be taken. If I were using a structure of the event into the loop of producer, I could use his timeout feature, but in my state machine, I can't do that.

  Example in the loop of producer:

  1. State "actuator move to position"-> mobile actuator
  2. Check the position every 100 ms until the goal reached<---- this="" would="" be="" my="" default="">
  3. After that position is reached, take a picture
  4. Output

  I admit, I still have a bit of trouble differentiating between the States and transitions. Currently my status in the producer State machine loop where to send the command 'move' and the positions of the target, is called now "move to xy. It runs only once. It might be preferable to have a State "now in motion" which reads the position and going on to the next State (for example "stopped") once the target is reached?

  Any thoughts on this please?

  Thank you!

  But now I have a problem:

  I would constantly check and show the positions of the actuators, as a case of default/message. Positions, different measures should be taken. If I were using a structure of the event into the loop of producer, I could use his timeout feature, but in my state machine, I can't do that.

  Why not? You can set the dequeue time-out so that if no message is received, it goes to a case of "timeout" of your QMH which is where you can check positions etc.

• How to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012

  Hello

  I would like to know how to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012 R2.

  I released some software in my field to a distribution point and I of installation for few of them software restriction policies. But I don't want the default next message below:

  "The system administrator has set policies to prevent this installation." This installation is forbidden by system policy. Contact your system administrator. »

  Instead, I would like to set up a custom message. Please tell us how can I do same by using Group Policy, if not available, what are the alternatives that I can use.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• Change the default settings for registration and opening.

  When I'm in a file and choose "Save as", I need to find the location.  But then the very next file I do the same thing and I looking for it all over again.  Is there a way to backup a specific folder or default directory at any time.  Currently, it is by default in my office in most cases.  The same thing happens when I search for a file, open it and then go to open another file in the same folder.  This seems to be a huge waste of time and was not like that in previous versions.  Thank you for any input!

  He has no control in Vista to make the changes you want to make for Vista itself.  David has provided default values for Windows 2000 and Windows XP, but not for Vista.  I can't find them for Vista- but they are what you feel and are entered into the system without installation available control to modify the default values (and I couldn't even find a way to do it with a registry hack).  Unfortunately, he must live with what you have.

  In most other cases program, it is controlled by the program itself (and varies according to the program0.  Some of these programs have commands to adjust the default settings (again, this depends on the program).  You will have to search for the documentation of the program or visit their web site (or call them for technical assistance) for more information on each program.

  I'm sorry this isn't the answer you want to hear.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Emial blackBerry default Z30 for sharing account

  I have a job and a personal e-mail on my Z30 account. In the hub, when I select 'New message' and then click the icon for the contact information of my wife, an e-mail form opens with my personal account already selected. However, when I try to share a web page in the browser, the 'Share' screen with the touch of my wife up icon as a "Suggestion". By clicking on that icon opens an e-mail form addressed him with the link to the web page in the message, but the default e-mail account is now my business account, not my personal account.

  Is it possible to share my personal account by default for the web page from the browser?

  Kind regards

  Bob

  Never mind. I discovered that I can put the default email for all these purposes account in the settings > accounts > select the default accounts at the bottom of the screen button. Sorry for the false alarm.

• Can someone tell me the default settings for the internal speakers (Realtek HD Audio Manager) on HP G62 454TU laptop pls?

  I had problems with IE11 and Outlook, both kept gel (not answer) more and more each day.  Outlook is still difficult sign in, I have to sign at least two times and once I got to sign on 7 times.  The drafting of emails, I'd get msg "cannot connect to Outlook - try again later. IE11 is also unstable permanently "unresponsive" my sound stopped working also and I found that he lacked Realtek HD Audio Manager.  It took nearly a week trying to figure out how to reinstall.  (I am 60 years old and not informed techno) Finally, I downloaded and installed (with no help from HP) but speakers still does not.  I approached then Microsoft Help Desk who suggested that reset IE11.  I did it yesterday and now all seems ok with IE11 and Outlook but I have still no sound.   Where to find the default settings for programs that use audio ie itunes, youtube, etc?

  I have only a couple of theories left to isolate the problem, but have no idea how to go on this issue.

  1. I received a msg when I lit the notebook from HP saying storage battery was low and the battery can be replaced.  I've never used this notebook on sector so I ignored msg but with freezes and random low cut that I removed the battery which seems to solve that problem, but I wonder if firm random downs could have damaged files, software or anything.

  2. Windows updates put things here that seem to be more for Windows 8 for example. Touch screen program.   Can we update caused problems for the sound on my laptop?

  I have run virus/malware programs with no threat found.  I also installed Glary to find and fix registry problems, but still no sound.

  Can someone help me please?

  Hello

  I'm sorry for the delay in response and for the inconvenience this problem did you. According to the description of the problem, you can't access your account and receive the error message "unable to connect to Outlook - try again later.

  I suggest you check the service state on https://status.live.com

  Note: you must identify yourself on the site to find out the exact state of the server, your account may be placed on

  I also suggest you to optimize your browser and check if it helps.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/no

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Question of Save as default profile for this monitor

  Hello

  My English is bad.

  I have Windows 7-64, PC, intel AMD i5, 12 G of Ram, graphics card gpu Nvidia quadro K600, X-Rite DisplayPro, i1Profilor software calibration device vs. 1.5.4.

  Color management Panel, tab device, verified my settings for this device box, use Windows display calibration boxing verified and gry as she is meant to be etc.

  Work in my user acount everthing was fine until suddenly, when I need to use a new profile for my monitor in my session and want to set as default for this device profile by clicking on the button, I get the message "incorrect parameter". With the button Add, I add a profile already installed by windows, for example sRGB together IEC61996 - 2.1 and tryto it by default with the button "use as default profile for this device", the same message. The only way to assign a default is to delete the real profile designated as default color management system to the next on the list "by default".

  If I change to a different user on the same PC account, everything works fine for this user, but not on mine. When I click on the button "set default profile" is OK.

  I'm trying to uninstall i1profiler and X-Rite and reinstall, twice, nothing has changed.

  I tried to chat with a technician for microsoft, and he only referred me to the help on profiling and Calibration page help in microsoft. I know this page by heart and there is no response he solve my problem. He didn't know what to do!

  Any help?

  Hello curves,

  Please keep us informed about the issue.

  I understand that the account on which you are facing problem is account owner who has administrator privileges. So I suggest to create a new administrator user account and check the status.

  This is a diagnostic stage, if everything works well in the new user profile it means there is a corruption in the profile owner.

  You can also visit the below mentioned link and check if it helps.

  Change color management settings

  http://Windows.Microsoft.com/en-us/Windows7/change-color-management-settings

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Change the default ports for http and https

  Hello

  I'm trying to change the default ports for http and https

  I have a 506th PIX (which does NOT of NAT)

  I have the following: -.

  static (inside, outside) tcp 192.168.10.2 601 192.168.10.2 http netmask 255.255.255.255 0 0

  static (inside, outside) tcp 192.168.10.2 602 192.168.10.2 443 netmask 255.255.255.255 0 0

  access-list acl permit tcp any 192.168.10.2 eq 601

  access-list acl permit tcp any 192.168.10.2 eq 602

  Access-group acl in interface outside

  where 601 and 602 are the http port and https to be redirect to respectively.

  I changed the webserver accordingly

  I get the error message

  "No group of translation not found for tcp src outside:189.x.x.x/50232 dst inside:192.x.x.x/80" (trying to access port 80)

  "I also have ' fixup protocol http 601.

  I had access to the internal and external web server before attempting to change the default ports

  Any ideas where I'm wrong?

  See you soon.

  I apologise for not thinking correctly.

  the static method must be:

  static (inside, outside) tcp 192.168.10.2 80 192.168.10.2 601 netmask 255.255.255.255 0 0

  static (inside, outside) 192.168.10.2 tcp 443 192.168.10.2 602 netmask 255.255.255.255 0 0