Question of Save as default profile for this monitor

Similar Questions

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• Win7 always tries to connect by using the default profile for the Native WIFI

  Win7 always tries to connect by using the default profile for the Native WIFI
  I defined a new WIFI profile for my home WIFI network. I use a USB of NETGEAR WNA1100 adapter. The profile is configured to connect automatically. I also moved over the default profile for the Native WIFI. Win7 always tries to connect to the default Native WIFI profile and not the profile that I created. Also, when I restart Win7, the default profile for the native WIFI moves to the top of the Profiles list. Also, when I try to change the default Native WIFI profile to use security WPA2 - PSK (AES) instead of WEP, it allows me to make changes, but he comes back to WEP after it treats changes and attempts to connect to the network. How can I fix so that Win7 will use my profile to connect to my home WIFI network and not the Native WIFI as the default profile. Win7 still connect using the default profile of NativeWIFI despite installing a different profile in Control Panel 'Wireless Networks '. I know that I can edit this profile by default, but anyone know how tell Win7 to use a different profile than the default? I tried to change the positions of the profile so that I want to use is facing up, but no, still uses the default. If I try to remove it, it comes back.
  After removing the two profiles and adding the profile for my home network, Win7 automatically added the default profile for the return NativeWIFI. My profile is configured to automatically connect to the network using WPA2 - PSK (AES) security and the default profile for the NativeWIFI (use WEP security) is the Win7 Setup to manually connect. Also, Win7 puts the default profile for the NativeWIFI above my profile. Also, when I delete the profile by default the NativeWIFI, Win7 it always puts back and he goes over my profile. This is starting to resemble the Win7 manage wireless mechanism for allowing users to add and prioritize the profiles of school boards does not work. Here's another thing that happens: when I try to change the security for the profile default of NativeWIFI to WPA2 - PSK (AES) of WEP, Win7 allows me to make changes, but it is up to the WEP after it processes the changes and tries to connect to the network. This seems too much for me, it's a problem with Win7. If I could do this job, so I need not to set up a second profile.
  The adapter I use a NETGEAR WNA1100 works correctly and I use it without any problem. I have is with Win7 and the interface to 'manage wireless networks '. It will not honor the fact that the WIFI profile that I created for my home network must be connected to automatically I installed. He always wants to connect to the default profile NativeWIFI even if I set up my home network profile to connect automatically. I can do a manual connection for my home network without problem. It seems to me that it is a question of Win7.
  Kind regards
  QRP

  Thank you very much - Netgear seems to have finally accepted as the default network!  If all goes well it will stay like this

  MAS

• is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Hi Kenelms,

  You can follow this link & check if it helps.

  HOW to: Set up hardware profiles for laptop computers in Windows XP

  Hope the helps of information.

  Please post back and we do know.

• Change the default profile for networks not identified in the register.

  Hi, I recently installed a copy of Windows 7 Home Premium. Recently, I tried to share files on a network computer to computer without router. I ran into problems with this, however, because Windows will just recognized here a network not identified, set its profile to the public and turn off sharing. I am aware that the default profile is editable through the local security policy editor, but being on the House, I am unable to access it, so my question is this:

  Is there a way to change settings of network profile for networks unidentified somehow outside the local security policy editor? (via the registry)?

  Hi Konaa,

  1. Click Start, type Regedit

  2. find hklm:\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318}

  3. find your network card adapter and create a dword value named "* NdisDeviceType" and change the value between 0 and 1 and enable/disable network cards.

  You can also try this:

  1. the Registry Editor open, if you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  This registry path, click the (GUID) subkey that corresponds to the card network that is connected to the network.

  3. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  4. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  DhcpConnEnableBcastFlagToggle click 5.right, and then click on edit.

  6. in the value data box, type 1 and then click OK.

  7. close the registry editor.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  How to back up and restore the registry in Windows XP: http://support.microsoft.com/kb/322756

  Back up the registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry

  =================

  Find the Hello service by typing "services.msc"... START-> "search box" and Enter.

  This service is installed by Apple, if you have iTunes or adobe applications.

  ===========

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• How to create a default profile for all users of a computer under Windows 7/Vista for Firefox versions greater than 8? I would that all new users on a computer to get the same values by default, homepage, bookmarks, etc...

  I found some help on older versions of Firefox, but I can't seem to find anything for the latest versions greater than 8. There must be a way to do this for imaging large scale.

  Have you created a defaults\profile in the folder of the program Firefox (C:\Program Files\Mozilla Firefox\)?

  All files in this folder will be moved into each newly created profile folder.

  To give the prefs a default, it is best to do this via a mozilla.cfg file.

  Use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify default values.
  
  Place a local file - settings.js in the defaults\pref folder where you will also find the channel - prefs.js to specify using mozilla.cfg file.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0); // use this to disable the byte-shift
  

  See:

  • http://KB.mozillazine.org/Locking_preferences

  You can use these functions in mozilla.cfg:

  defaultPref();  // set new default value
  pref();         // set pref, but allow changes in current session
  lockPref();     // lock pref, disallow changes
  

• How to create a default profile for all users of Firefox 9.

  I run a computer lab and am looking for a way to create a default profile in Firefox 9 that allows new users. I want them to be able to launch Firefox for the first time and see my home page. I want to disable any control for default browsers, firstrun pages or all the other guests.

  The former for group policy .adm files did not work longer.

  See http://www.frontmotion.com/Firefox/howtodeploy.htm

  You can create a defaults\profile file in the Firefox program folder and place the files that it be used to create and initialize a new profile.

• Windows cannot load the users profile but you have logged on with the default profile for the system. Insufficient system resources exist to complete the requested service.

  It started just without something new being created!

  This happens when your user profile is damaged or corrupted.  To recover from this, try one of the following Microsoft KB articles:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  HTH,
  JW

• HP Laserjet P1102W: I chose the eco mode (less ink) for a print job. Now, default printer for this. How to cancel?

  I chose the eco mode (less ink) for a print job.  Since then that a default printer and some programs (for example, picasa) allow me to choose normal print mode I often forget to choose normal.  How can I definitively cancel eco or printer back to the original setting?  Printer works wirelessly.  Thank you.

  In Windows 7, click Start, devices and printers, right click on the Laserjet P1102w, select Printing Preferences.  Select the desired default values, apply, OK.

• Windows 7 crashes my profile, leaving me with the "default" profile. Even if I wipe my laptop and re-install.

  Hello

  First: I have two identical laptops purchased from Dell with the same hardware configuration - both delivered with Vista. I upgraded to W7 as soon as possible, and since then, one of the laptops does not load my profile several times.

  I use to work as a system administrator, so of course, at the beginning, I didn't much attention to the mistake thinking it was just an incident. I formatted the computer, reinstall W7 and, of course, the error occurred again - constantly even if I wiped it and re-install.

  What is happening is that the computer starts, I connect Windows crashes for the moment very loong and then all of a sudden he says "preparing your desktop". When that happens I know its load under the 'default user profile', it's 'welcome '.

  This error occurs about two to three times in about 7 days. But not all the time - it's like periods. I usually get through this by organizing the closure for 4 seconds, restart, and then, if I'm lucky, gets through my office.

  A few times that I had no chance - restart of 6 times in a row without luck somehow shows that the profile files are really damaged, and then I created a new migration profile all my old files. This process takes time - not simply copy my files but also the settings of my program.

  Last week, I deleted my user just to create a new one-8 it recharges without success.

  I looked in eventvwr.msc and found that everything begins with six fouls in a row. I don't really know what do - the error log says error but it seems not very well describe it.

  It goes like:

  1 error:

  Windows could not load the registry. This problem is often caused by insufficient security rights or insufficient memory.

  DETAIL - the process cannot access the file because it is being used by another process.
  for C:\Users\[my account] \ntuser.dat

  EVENT ID: 1508
  TIMESTAMP: 2010-12-30 10:03:46

  2nd error:

  Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a damaged local profile.

  DETAIL - the process cannot access the file because it is being used by another process.
  EVENTID: 1503
  TIMESTAMP: 2010-12-30 10:03:46

  3rd error:

  Windows has backed up this user's profile. Windows tries to use the backup profile the next time this user connects automatically.
  EVENTID: 1515
  TIMESTAMP: 2010-12-30 10:03:46

  error 4:

  Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you log out.
  EVENT ID: 1511
  TIMESTAMP: 2010-12-30 10:03:46

  error 5 (a warning):

  Windows cannot copy file C:\Users\Default\NTUSER. DAT to the C:\Users\TEMP location. [Name]. 000\NTUSER. DAT my PC. This error can be caused by network problems or insufficient security rights.

  DETAIL - the process cannot access the file because it is being used by another process.
  EVENT ID: 1509
  TIMESTAMP: 10:03:47

  error 6:

  Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  RETAIL - only part of a query ReadProcessMemory or WriteProcessMemory was completed.
  EVENTID: 1505
  TIMESTAMP: 2010-12-30 10:03:48

  I don't know what it is. I can only say that reinstall W7 does not help. And lately, after creating the new profile, W7 began to start the default new desktop computer.

  So my question is: can I fix? If its not repairable can at least save files like ntuser.dat to crush the ntuser.dat file damaged W7 start sleeping?

  On the comp: 3 GB RAM, Core Duo2. The computer is used only for navigation on the internet, written for my studies and other reports not _ none of the weird stuff and no games at all.

  p

  Software properly written (as opposed to malware, viruses, and poorly written stuff) has similarly on day 1 after installation on 30 days. So you can go ahead with your driver and software installation as fast as you want, as long as you create a new file image at strategic points and keep notes dates when you installed this component.

  Given your experience, you will need to proceed cautiously with the automatic updates. First disable them, and then put the installation in Manual Mode so that you can install in small batches, again take notes.

  If you use Acronis image to create images, then you will need only half of space compared to the native tool. And if divide you your drive and put your personal files on the D: drive then you will not lose them during a restoration of the image.

  Be sure to keep your Windows Firewall active at all times and use a router. Make an Internet connection without a router (which is a hardware firewall) request in trouble. If you use a wireless network, make sure you use a WEP or WPA or MAC address screening encoding.

• Default profile

  Hello, I'm working on the set up a small laboratory for a school and I would like some advice or suggestions. First of all, I noticed applications such as office and settings are stored in general not. BTW, I'm going to us using floating desktop non-persistent. I noticed that when I log in the variable Office some request of initials such as Microsoft office applications, etc. Office actually ask you to re-register because it detects that it is on another machine. I wonder if everyone is using view as such, and if they could give some tips or best practices. I'm also looking for a way to disconnect the user if idle for a certain period of time, and after a game fixed time if users not machines of pork. I think I could probably create a task, or something for this, any advice on what part is appreciated as well. Thank you

  I work with a fairly large deployment of VDI desktops for a school district and we have a lot of applications that need removal of the "first release" dialogues and license agreements.  Solutions for these can be different for each piece of software.  I remove the first dialogue running MS Office via Group Policy.  Get the ADM or ADMX file for your version of Office and import it into your GPOS and then use the appropriate setting to remove dialogue.  If for any reason you don't not want to use Group Policy to control these things (don't know why you wouldn't), you will still find that the registry key is associated with the policy setting and change the default profile for relative image or something.

  As for your activation problems, my advice is to just start searching the Internet.  There will be many people faced with the same question.  We use a KMS server, so it manages activation for me.  Here is a link to help you get started, which can help...

  Office 2010 were not turned on after sysprep in VDI

  For the automatic disconnection after a period of inactivity...

  I actually did this thing just now with AutoIt script.  If you are not familiar with AutoIt, I suggest you check out it.  Tasks of scripts like this is very easy.  If you get it, download it the main package of AutoIt, then also the SciTE editor and tools.  They are all available on their main website.  You can use the _Timer_GetIdleTime() to track how long the user is inactive.  I tried to find my script to give you an example, but I can't find right now.  There may be an easier way, but I just create a small script and has placed as a startup item.  It would automatically disconnect the user after reaching a certain time of inactivity as.

• Is there a default value for NC_ATTRIB_BKD_PERIOD

  I got a project and the value of NC_ATTRIB_BKD_PERIOD has been set to 10. I changed this value to 1 (I guess that's milliseconds) and the software runs much faster save about 20 seconds on a second test period formerly 60. I have used NEITHER CAN before and have never encountered this before setting and I was wondering if there is a default setting for this and if yes, what is it?

  Hi John,.

  If you look at the nican.h, you can see that the NC_ATTRIB_BKD_PERIOD is the legacy version of the NC_ATTR_PERIOD attribute.  (I say "If you look", but it is not really clear just looking at...) The NC_ATTR_PERIOD is documented as follows in the manual NI-CAN

  NC_ATTR_PERIOD (period)
  Duration specifies the rate of periodic behavior in milliseconds.
  The behavior depends on the Type of Communication as follows:
  NC_CAN_COMM_RX_BY_CALL
  Duration specifies a minimum interval between the
  transmissions. Even if ncWrite is called very often, executives
  are transmitted over the network at a rate no more period.
  Definition of period to zero disables the minimum interval timer.
  NC_CAN_COMM_RX_PERIODIC
  NC_CAN_COMM_RX_UNSOL
  Time specifies the time between subsequent transmissions.
  and must have the value greater than zero.
  NC_CAN_COMM_TX_BY_CALL
  NC_CAN_COMM_TX_PERIODIC
  NC_CAN_COMM_TX_RESP_ONLY
  Period specifies a timeout of watchdog. If an image is not received
  at least once each period, a time-out error is returned. Setting
  Period to zero disables the timer.
  NC_CAN_COMM_TX_WAVEFORM

  If the change you made will have different effects depending on your mode of transmission.  In my view, the default value is 0, but maybe it's not valid if you change the mode of transmission.

  Let me know if you need more information.  Have a great day.

• How to create your default desktop for all / some users?

  Using Vista business I want to create a desktop computer by default for all users. How can I do this?

  I have a machine that has a dozen accounts. Can I retroactively apply this desktop computer to some existing accounts?

  Thanks for thehlp

  Joe

  Discussions on the topic "Change the profile by default in Vista"
  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/62ed66ad-71cd-43C3-83c0-5303d77176b8/
  by Heather

  "How to make a standard profile w / user by default.
  http://forums.techarena.in/Vista-Help/1065679.htm
  by Darrell Gorter [MSFT]

  How to create the default profile for Vista
  http://help.Lockergnome.com/Vista/create-Vista-default-profile--ftopict15825.html
  Darell Gorter mentioned here only taken methods supported to change the default user profile:
  "How to customize the local default user profile when you prepare a
  image of Windows Vista, Windows Server 2008, Windows XP, or Windows Server 2003"
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 959753
  but when you go on the link says the Tip system is not for Vista, on Windows Vista title is missing.

  I hope I could help

• Copy the user default profile problem profile

  I am trying to copy a user profile to the default profile for all users who log on will have the same parameters as the user.
  I used the built in tool copy of profile under System Properties > advanced > settings...
  For all copies fine except some program registry keys still point to the original profile rather than the newly created on logon profile.  This seems to work without problems under XP but in Vista it fails every time.
  Is there a new way to manage default profiles, that I don't know?

  Thank you

  Kleenex82,
  Thank you for visiting the Microsoft Answers community forum.

  CopyProfile Specifies if the default user usually stored under C:\Users\Default profile is replaced with the profile of the currently logged in user. You can use this parameter to copy the settings of user profile in all user accounts created on the destination computer.

  Use the following steps to define custom user profiles:

  Connect you as the user whose profile you can customize (for example, the built-in Administrator account).

  Customize the settings of the user profile of your choice.

  Set the CopyProfile to true.

  Run the command sysprep / generalize to copy the custom default user profile user profile settings.

  All subsequent user accounts created will have the customizations that you set. For more information about Sysprep, see the Sysprep technical reference in the Kit OPK (Windows OPK) user's Guide.

  This setting does not copy the profile of the built-in Administrator, unless the built-in administrator is the currently logged-on user.

  Let us know if this was helpful, or if you need assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need a driver 64-bit windows 7 for a monitor HP 1955

  I'm stuck in 1280 X 1024

  Hi Jim,.

  HP is not specific W7 64 bit driver for this monitor.  You can use the generic Windows driver.

  See page A-2 in this Manual.

  This problem just start?  Did transfer this monitor to a new PC?