definition of my time before I go to my screensaver.

Similar Questions

• When I download firefox and bring it up it flashes 5 or 6 times before going to the home page

  get a file off several times to go to other locations on my desk, for example, my photo file. When I try to put firefox back up it flashes 5, 6, or even 7 times before moving my home page. It is of is there, but it is annoying and should not happen.

  even if I do an output file I had too many things open. a friend fixed it for me. Thanks anyway.

• How can I change the amount of time before a call to voicemail

  How can I change the amount of time before a call to voicemail?

  -alex-

  You will need to contact your carrier and see if they can change. There is no setting on the phone, only the owner can modify it, if they can. Not all carriers cannot change, and even if they can, it's a very short period. This has to do with the configuration of the call. At least you know that it's all the time and not the number of ringtones.

• How to get the phone to ring several times before the voicemail picks up

  Is there a setting to let the phone ring several times before the voicemail picks up

  This option will be controlled by your wireless operator. Contact them to determine whether it is possible to change the response time of voicemail.

• the screen is black at startup, I have to turn off many times before the lites screen upward

  screen is dark at the start until I have to turn off several times before the lites screen upward.

  [Moved from comments]

  Hi Ken,

  It would be more useful if you answer these questions.

  1 Windows operating system you are using?

  2. What is the brand and model of the computer?

  3. were there any hardware or software changes on the computer?

  If you use Windows 7, then follow the article provided to fix black screen at startup issue.

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

  Thanks vikrant I used scannow and it fixed my problem of registry. I have windows 7. Click Start type command RT. Click on the cmd icon, click on run as administrator, black screen should appear. type sfc/scannow press ENTER.

• When we look something up on the internet, I'm always redirected 4to7 times before I get the page I'm after. What is a virous and how do I get rid of him?

  When I try to go on the internet, after you type in a subject, I get the usual list of items to the choice. But when I try to select one of them, I redirected sometimes up to 8 times before iget the page I want. I redirected pages yellow and many other sites that have nothing to do with what I am looking upward. If it is avirous how can I get rid of him.

  When I try to go on the internet, after you type in a subject, I get the usual list of items to the choice. But when I try to select one of them, I redirected sometimes up to 8 times before iget the page I want. I redirected pages yellow and many other sites that have nothing to do with what I am looking upward. If it is avirous how can I get rid of him.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Go off & on several times before the monitor turns on. Comp seems to start OK but the problem is with the screen.

  Original title: XP start help please...

  ... are to be turned off & on several times before monitor lights. Comp seems to start OK but the problem is with the screen. Do I have to make a boot disk & if so - HOW?

  Hello

  ·         What is the brand and model of the computer?

  ·         You get the error message?

  ·         Did you check the connection of the cable to the monitor?

  ·         Have you tried to update to the latest graphics card and motherboard chipset drivers?

  First, try to connect your monitor to a well known PC, maybe the old laptop that you use now. If the monitor works, the problem is with the video card in your PC. If the monitor does not light, the monitor. It is usually cheaper to buy a new monitor that in order to be an old repaired, unless the monitor is still under warranty.

  Try connecting a monitor well known to your PC. If the monitor works, your old monitor is fried and needs to be replaced.

  If your monitor works when connected to another PC, the problem could be your video card. First, and then you turn on your PC, the power and cooling case fans run they. If they do not, it could be the power supply.

  Then, open the computer case. Before you do anything inside, unplug the power supply.

  IMPORTANT! Touch any metal part of the computer case to connect to the PC. A single static spark can destroy computer circuits.

  If the video card is the type of card that plugs into a slot on the motherboard, remove the screws or attached at the top of the card, remove the card, to manipulate the card by the edges to avoid disturbing the circuits on the card, carefully and re - install the card. Sometimes simply reinstalling the card corrects the problem.

  If this does not work, replace the video card with a card of similar type. Perhaps now is the right time for an update of video card.

  If the video card is integrated into the motherboard, you can install a new card in one of the PCI slots on the motherboard. When the PC starts for the first time, go into the bios and disable the onboard video.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

• After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally? What other steps should I take in Mode safe?

  After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

  Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

  I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

  I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

  XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

  Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

  After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

  Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

  I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

  I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

  XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

  Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

  System Restore IS NOT the way to remove malware. The reason why you do not see the effects of the malware in safe mode is probably due to the fact that the process for most malware does not load in safe mode, and therefore not active.

  Restart the computer in Safe Mode with network. Click HERE. Download Malwarebytes. Update Malwarebytes and perform a full scan.  Choose to quarantine found nothing. Once completed click HERE and download Superantispyware Portable. Run a full scan quarantined found anything yet. Restart your computer in normal mode and perform a quick scan with Malwarebytes.

• How to change the time before my computer goes to sleep when I type?

  Help

  Hello

  See the guide below on setting the time "Sleep".

  http://thecustomizewindows.com/2011/01/change-the-time-before-your-PC-goes-to-standby-in-Windows-7/

  You may also need to adjust the time before the screen saver of the cuts - if you do, see the following topics.

  Open windows control panel, open personalization, click on the link of the screensaver on the bottom right and in the next window, adjust the time of "Wait" to a more acceptable figure – also, if you don't want to log-in after the screensaver, Remove the tick from the box "in»the logon screen curriculum vitae  Click on apply, then Ok to save the settings.

  Kind regards

  DP - K

• By turning on my computer, the screen is black__I and in turn put off tension several times before will__boot uo__

  Turning on my computer the screen is black
  I turn then turn off many times before, it will be
  Start

  Hello

  Since when are you facing this problem?

  Try the following steps:

  Step 1: Update the drivers for your graphics card.

  Follow these steps to update the drivers for your graphics card:
  a. clickStart, click run, and type devmgmt.msc.
  b. in the list of devices, double-click graphics card.
  c. right-click on the device driver.
  d. click on update driver to open the Hardware Update Wizard. Follow the instructions in the wizard.

  Refer to this article for help:
  http://support.Microsoft.com/kb/283658

  Step 2: Start the computer in safe mode.

  Refer to this article for more information on how to start the computer in safe mode:
  http://support.Microsoft.com/kb/315222

  Step 3: If you can start with success on the desktop in safe mode, then perform a clean boot to verify if a third asks the origin of the problem.

  Refer to this article for more information on the clean boot:
  http://support.Microsoft.com/kb/316434

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dial a number through rings PSTN three times before moving on to compose through the line

  Dial a number through rings PSTN three times before moving on to dial by phone line.
  I would like to Setup so that when I dial a local number through the phone line, but when I dial long distance call going VoIP.
  In our city to the Canada, we make a local call using the area code. e.g. xxx-xxx-xxxx
  Long distance is preceded by a 1 e.g. 1 xxx xxx-xxxx
  The numbering plan defined in 1 line numbering Plan: is (250xxxxxxx<:@gw0>| 1xxxxxxxxxx.)

  How can I make the SPA3102 immediately start dialing the local number without the three three apparently redundant rings?

  
  

• power on/off my PC 5 or 6 times before it will start up... need to help...

  Recently, I can switch my PC 5 or more times before she will be up... start it is plugged into an outlet so the problem is not related to the battery...

  Hello

  ·         Since when are you facing this problem?

  ·         Remember to make changes on your computer before the show?

  ·         What is the brand and model of your computer?

  Method 1:

  Try following the steps in the article provided below and check if it helps:

  Why my computer won't turn on or off quickly?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-wont-my-computer-turn-on-or-off-quickly

  Method 2:

  Also try to update the BIOS and check if that helps:

  OS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Method 3:

  Also try following the steps outlined in the article below:

  Solve power problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  Hope this helps

• at the start, computer turn on and off several times before finally starting

  Product: Hp Pavilion M9177C-B

  OS: Vista Edition Home Premium

  Approximately 2 weeks, when you start the computer by pressing the Start button, blue starting light turns on, then turns off maybe 6 + times before it turns finally for good and then I can hear the hard drives being accuated.  I fear that one of those moments that she not turn for good. So, I took the computer on at all times and just close the devices.

  Hello slodave,

  As you hear hard drives or anything on the spot for a while, it seems that the problem may be due to your diet.

  You can look at the power Panel there should be a light on the subject. See if it shows that it begins well before the computer actually turns on (so it comes at the time 6 + it is turn on/off).

  If the food will then replace just to continue normal operation.

• Increase the idle time before my screen saver is activated

  While I'm on the line, after 5 minutes of inactivity, while displaying a site etc, my screen saver is activated, making me use my mouse to go back to the page I was veiwing previously.  How can I increase the amount of time before the screen saver is turned on in windows 7.

  Thank you!!!

  Go to control panel and click on appearance and personalization.

  Under customization you will see a link to "Change screen saver", click on that and a configuration window should appear.

  There, you'll be able to set the time interval so that the screen saver is used.

  MVP - Windows desktop experience

• How to set the amount of time before the screen turns off during the slow activity

  Adjust the idle time before the screen saver stops

  Right click on the desktop | Customize | Screen saver | Change the power settings.