Definition of the UITextField control police

Similar Questions

• Satellite A665-15U 3D stereoscopic missing definition in the Nvidia Control Panel

  Hello

  I currently have a computer toshiba laptop A665-15U with an nvidia GT 330 M and an acer hd5360 projector.
  After checking on the nvidia site, GT 330 M working with 3D and my projector is also compatible with 3D.
  I also have the vision 3D Kit 2.

  The issue is that stereoscopic 3D is missing on my Nvidia Panel,
  I have contacted the customer of NVIDIA, mail service, and they said that:

  + To work in 3D display must connected to the NVIDIA graphics card. +
  + I would suggest you check with the manufacturer of the laptop if there was no output or not connected to the NVIDIA graphics card. +

  But I check on my laptot, there is only a single VGA port.

  shrieked, the screenshot of my connection:
  http://www.ZimageZ.com/zImage/screenshoot22.php

  is that what someone was the question?

  More information:
  I installed the latest nvidia driver:
  Version:
  306.97 WHQL

  I ran on 120 Hz on my projector

  I tried to remove and reinstalled the last pilot

  I tried to use only stereoscpic 3D driver on toshiba support website (does not work):
  10/06/10
  Stereoscopic 3D driver
  nVidia Windows 7-64 bit

  Hello

  To use nVidia 3D Vision, you will need to set the projector at 120 Hz
  You can do this in display properties
  Control Panel-> appearance and personalization-> display.

  In addition you must set the GPU nVidia as a default value for specific programs to use 3D on 120 Hz disaply external.

  Start-> Control Panel-> nVidia Control Panel.
  Now, expand 3D category settings and select manage 3D settings.
  In the program settings tab, select a program that needs to use the nVidia GPU (required for 3D) map

  Now select the GPU for this program.

  Here you will also find the universal installation guide of ision 3dv too
  http://www.nvidia.de/content/3DVision/docs/3DVision-universal-install-guide-aug12.PDF

• Does anyone know how to control the characteristics of police in a table with a front panel control?

  It seems that it should be simple enough.  I want that the user can adjust the characteristics of police of an array of numbers with some controls on the front panel.  I know how to do this using the drop down menus - but I want my users to do with the controls on the front panel.  I looked at the options property node and it does not resemble anything in here would help...

  Thanks for your time.

  j.

  Right-click on a digital control in the table and choose Create-> property Node-> NumericText-> police-> size.  Change to write and this allows to adjust the size on the fly.

• With the help of the police included in the tree control

  Hello

  I am trying to use embedded font to change the font family for a control tree but hopeless, I tested the police embedded with a label component and it worked well, but for the tree control, I couldn't succeed.

  Can anyone help with this, don't--what someone has any idea?

  You must embed the version "BOLD" to the police as well.

• SX20: Definition of system using the remote control password

  Hello

  Cisco SX20 Quick Set: TC6.1

  I usually know the system password is set using CLI Web.

  But I would like to know if it is possible to set the system password using the remote control.

  If so, can you guide me.

  Thanks in advance

  Hello

  the remote control you can set the menu password, system password is not remotely possible.

  You can also set using cli commnad.

  xcommand SystemUnit AdminPassword Set Password: xxxxxx

  HTH

  Kind regards

  Dharmmesh

• Set the style to null does not reset the attributes of police - Bug or feature?

  I call setStyle ("police - fx - weight:" BOLD "") with a label - the label text is in bold.
  Then I call setStyle (null) with the same label - now awaits the etiquette police returned to the definition of the CSS.
  
  But: the label does not indicate a normal font now - it's always "BOLD".
  I have to explicitly call setStyle ("police - fx - weight: normal") in order to bring it back to the normal font.
  
  Is this a bug or a feature?
  If it is a bug, so I'll post a message-Jira, but I'm still not 100% sure...
  
  My FX version is 2.2.
  
  Thanks + regards!
  Björn
  
  
  
  Code examples:

  package ztest;
  
  import javafx.application.Application;
  import javafx.event.ActionEvent;
  import javafx.event.EventHandler;
  import javafx.scene.Scene;
  import javafx.scene.SceneBuilder;
  import javafx.scene.control.Button;
  import javafx.scene.control.Label;
  import javafx.scene.layout.VBox;
  import javafx.stage.Stage;
  
  public class Test_62_FontStyle 
      extends Application
  {
      public static void main(String[] args)
      {
          launch(args);
      }
  
      boolean m_bold = false;
      VBox m_vb = new VBox();
      Label m_la = new Label("Some text to be styled.");
      Button m_bu = new Button("Change");
      
      @Override
      public void start(Stage primaryStage)
      {
          final Scene scene = SceneBuilder.create()
               .root
               (
                    m_vb
               )
               .build();
          
          m_vb.getChildren().add(m_la);
          m_vb.getChildren().add(m_bu);
          
          m_bu.addEventHandler(ActionEvent.ACTION,new EventHandler<ActionEvent>()
          {
              @Override
              public void handle(ActionEvent paramT)
              {
                  m_bold = !m_bold;
                  if (m_bold == true)
                      m_la.setStyle("-fx-font-weight: bold");
                  else
                      m_la.setStyle(null); // does not reset font!
  //                    m_la.setStyle("-fx-font-weight: normal"); // this works fine...
              }
          });
          
          primaryStage.setScene(scene);
          primaryStage.show();
      }
      
  }

  This is a known bug: setStyle (null) and setStyle("") does not cancel a previous call setStyle()

  https://JavaFX-JIRA.Kenai.com/browse/RT-25002

• Satellite Pro U400-SP2804 - Microphone is not listed in the volume control

  Hello
  I can't listen to the microphone from the speaker, because does not appear micro in the Volume control

  On the start menu< control="" panel="">< audio="" devices="">< advanced="" properties="">< volume="" control="">< properties="">

  Mixing: Conexant HD Audio output

  Volume controls:
  Volume control
  Wave
  SW
  CD

  But n - t apeear option microphone or line

  My sound card is Conexant High Definition SmartAudio 221

  I was reading, and I think the problem is: it doesn't have a key in the windows registry value, someone help me, thanks

  I did: reinstall the driver, uninstall the driver and put another card sound, change the operating system, works wth 2 sound cards, portable computer, import registry values from the other laptop. but does not solve the problem.

  My problem appears with Winodws XP 2002 SP3 and Windows Vista professional

  Hello

  The port microphone or line is not because you are looking for this audio * output parameters.
  The microphone is a device of entry so it s not who listed there.

  If you go into the volume settings > options > properties you can switch to HD Audio input.
  Now you can change the volume of the microphone! :)

  Good bye

• Using aliases for the indicators, controls, procedures and calculated channels

  Hello

  I noticed that aliases do not appear in the workspace for the controls and indicators and procedures system Explorer and see calculated. Is there a way for them to appear? I need to use aliases because I like my definition of the system to control several test systems (which have different CAN report names). Otherwise my system definition would break every time I go to another CAN the database. I thought that the inability to address limited to the configurable alias controls add on, but it seems that VeriStand natively cannot address the areas I would like to also well done right click. Any recommendations would be welcome.

  Thank you.

  You are right that you cannot use alias in a file system definition for mapping purposes. It is an area that we hope to improve in the future. The initial design of alias was to serve as a public interface for the workspace, profiles of stimulus and so on. However, it is certainly a use case valid to be used as an interface in a system definition.

  A possible solution would be to create a set of user channels that play the public role of your interface in your system definition. Always use your user channels in all procedures, calculated channels and so on. Map your CAN channels on these channels to the user. Whenever you update YOUR database, you must remap the new CAN channels to the appropriate user channel. You can also automate this activity by importing a file delimited by tabs on the mappings page. The one drawback here is that your target will take a little more time to deal with these mappings.

• Add id number to the custom control

  Revive this thread. I have to add created ID dynamically controls too.

  (1) how to add ID to the dynamically created controls

  (2) is there a method to dynamically children created list of controls in a container?

  (3) select / change the properties of the dynamic controls from outside their parent container?

  MOD EDIT: Subject changed to reflect a new topic

  Please create your own thread for your questions (next time).

  (1) the easiest way would be to add the properties you need in the definition of the element of the dynamic control
  (2) you can use the count() and at() in the container
  (3) If you have a reference to the control, for example using 2), you can access its properties.

• Disable the break control file

  Please can someone tell me how to disable the breaking control file that is attached to a data definition, it is no longer necessary for this definition of data...

  I need an option without re-creating the data definition

  Concerning

  Check this https://community.oracle.com/thread/1027694

• Retention policy for the grid control

  Hello

  One of our clients wants to change the retention policy of the Grid control to 2 years in order to check the statistics of the application of these last 2 years,

  Default purge policy is as follows:

  Raw metrics - 7 days

  An hour aggregate metrics data - 31 days

  A day aggregate metrics data - 365 days

  Having someone of you will never change these default policies to a great values?

  I'm afraid of performance issues

  Depends on what policy they want change, but I n ' tthink this will help you at all.  If they are looking for AWR data, it is not stored in MS, unless you configure CWA warehouse.   EM will be measures such as SQL response time, but it does not store the SQL query and the stats you'd see in an AWR report.   Storing so for 2 years will not help.  If you want just generic performance history, then changing strategies of purge will be fine, but you don't want to store the raw data for 2 years. Keep in mind that you will increase the size of your repository database as well.

• How to get the break control file in the xml editor

  Hi all
  
  I use oracle Apps r12 and Bi publisher 10g.
  
  I followed these steps to burst Xml reports
  
  http://apps2fusion.com/apps/21-technical/251-xmlp-concurrent-program-revisited-with-bursting.
  
  I created the definition of data and now I need to reach the break control file.
  
  If the system will generate burst control file after the creation of data definition, or to create a control file.
  
  Thanks and greetings
  Srikkanth.M

  You must create a control file and upload it.
  You can also check this blog for detailed steps http://garethroberts.blogspot.com/2008/03/bi-publisher-ebs-bursting-101.html

• What are the 'additional Control Point', 'current log tail' and RBA

  I myself messgae in the alert log file

  Incremental checkpoint up to RBA [0xe.58bfe.0], current log tail at RBA [

  In reading articles on Oracle and the Oracle documents, I have also come across these three terms much

  Incremental checkpoint
  current log tail 
  RBA

  I really want to know what they are in a short and clean definition. Lengthy discussions are devoted to "Incremental Checkpoint" in the url

  Incremental Checkpoint
  http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:19311485023372

  But I got confused.

  There are many different types of control point - the thing they have in common is that they require the database writer to write disk blocks (see the last part of this post: http://jonathanlewis.wordpress.com/2007/04/12/log-file-switch/).

  The "additional control point" is simply the name given to the event of control point which is scheduled to occur every three seconds and allows dbwr to write of disk blocks that have first changed more than a certain distance in the past.

  In this context, RBA means 'redo the address bytes' (address of block redo only sometimes) identify a location to a redo log file.
  The 'end of the newspaper' is the latest ARI redo entry written in the restore log file growth.

  In a control post additional dbwr derives a value for a Resource that represents a previous point in time and written on the disk of the data blocks that have been changed by generated redo before RBA and have not been written to disk since this change.

  Depending on the configuration of your settings file the previous RBA may be derived in a time lag, a volume of roll forward or the number of blocks of data that have to be modified for the IRA at the end of the paper (actually).

  Concerning
  Jonathan Lewis
  http://jonathanlewis.WordPress.com
  http://www.jlcomp.demon.co.UK

  Published by: Jonathan Lewis on June 27, 2011 23:15
  Improved the writing and editing of a fault.

• Problem with the fl.controls package...

  I get a very strange error with the fl.controls package. When I try to import the package it says that the package could not be found.

  Document class:

  package
  {
      import fl.controls.Button;
      import flash.display.MovieClip;
      
      public class ButtonExample extends MovieClip
      {
          private var b1:Button;      
          public function ButtonExample() {
              b1=new Button();
              addChild(b1);
          }
      }
  }
  

  Error report:

  Line 8: 1046: Type was not found or was not a compile-time constant: Button.
       private var b1:Button;      
  
  Line 10: 1180: Call to a possibly undefined method Button.
       b1=new Button();
  
  Line 3: 1172: Definition fl.controls:Button could not be found.
       import fl.controls.Button;
  
  Total ActionScript Errors: 3,  Reported Errors: 3
  

  I don't know what to do with these errors. The code seems fine to me, I checked again and again, but still can not compile with errors.

  Any help would be much appreciated.

  Thank you

  No, he can't.  the fl.controls.Button class includes code to the graphics used in the button component.  If you do not use a component button, do not import this class.

• Add 'jump 1' to the definition of the external table after...?

  I created several external new definitions from file table definitions, but when the 'production' files have been created have now a header row at the top which should be ignored for not to be taken as data.
  
  Is there a way to "Edit" the file or definition the definition of the external table to add the mention "jump 1' without having to recreate the definition file to re-import the file and then recreate the external table?
  
  I remember there is a place in the file import process that asks the number of lines to skip.
  
  Thank you very much!!
  
  -gary
  
  P.S. This is indeed an OWB 10.1.0.4 environment but I guess he would hold even to 11g as well. :-)

  Hi Gary,.
  It seems OWB10g R1 does not setting property to jump (for the creation of the external table or SQL * Loader control file).

  But for OWB10g R2 and later it is possible:
  (1) in the Properties window of the file on the general tab, change "number of lines to skip.
  (2) synchronize the corresponding external table and deploy

  Kind regards
  Oleg