Satellite Pro U400-SP2804 - Microphone is not listed in the volume control

Similar Questions

• Satellite Pro U400 - audio quality is not good

  OK this problem has been plaging me for years. I have a Toshiba Satellite Pro U400 windows 8.1.

  The sound quality is terrible.
  I can remember it's bad in windows 7.

  Contextant driver is bad, and so is the generic driver windows 8.1.

  Help, please

  To be honest, I have no idea what you mean exactly by the quality is terrible.
  I've owned a notebook Satellite U400 happened and I have to say that the sound quality was quite good.

  Satellite U400 is a small portable 13.3 and the speakers have been adjusted to the dimensions of the laptop.
  The Conexant audio chip is part of the motherboard and you will not be able to replace it.

  If you want to use another sound card, you can try to use an external USB audio interface.
  I use this external sound solution for my home recording studio.

  The audio interface is connected to the USB port of the laptop s and the external speakers are initiated for the external audio interface.

  By the way: isn't Satellite U400 is the list of the supported 8.1 notebooks... Win so you won't find not all drivers Win 8.1 for this unit on the Toshiba driver website.

• Fingerprinting is on Satellite Pro U400-160 - specified database not found

  Hello

  Well, I recently bought a Toshiba Satellite Pro U400. The first day, I took my fingerprints, and all went well.
  The next day, the software reinstalled himself for some reason any... and lost of my fingerprints.
  So I went back to the software TrueSuite Access manager, but this time I had a problem!

  ' *' Error: specified database could not be found ' n ' exact error message no, something similar.*

  I got this message, so I looked in this forum. I discovered that I could reinstall the software, so I did and got the last update, but it's the same thing.

  I don't know what to do, I just installed Office 2007 since I was the computer, nothing else.

  Help, please!
  Thank you very much

  You take the recovery disc and reinstall the OS using the Toshiba disc.
  The laptop must be set to the factory settings/configuration and then you should check if the same error message again.

• Satellite Pro U400 - 13 k - can not connect on Vista - SOLUTION

  Setting of the Romanian regional components at installation time makes you unable to log into vista: Runtime LogonUI.exe error

  Model: Satellite Pro u400 - 13 k.

  No problem:

  Installation of vista start preinstalled, idir a u400 - 13 k,.
  When prompt change to Romanian locale

  Result: after completing the installation of vista program, LogonUI.exe crashes with Microsoft C++ Runtime exception dialog box.

  _Solution: _

  * Restart in mode safe then burn collection amovible.*
  * Restrat configuration then do not change the regional settings *.

  Hope this helps other customers until it is resolved.

  * For Toshiba QA Team *: I spent almost 4 hours to work around your untested product. Please at least fix this bug for other clients, as the time is important to everyone. I guess this can be linked to the logon request is not properly located or crush fingerprints.

  Kind regards.
  sandi_ro.

  US Forum: http://laptopforums.toshiba.com/tshb/board/message?board.id=brd_SatPro&message.id=180

  Hi Sandi

  Thanks for this solution.
  This could be useful for all users who are looking for such a solution here in the forum.

  Greetings

• Satellite Pro M70 - WLAN adapter is not listed in Device Manager

  Hello!

  I just formatted my drive and reinstalled Windows xp and now I can't turn on the wifi. The light is on and the switch is on but it does not work.

  I downloaded all wlan drivers but nothing has worked. In the Device Manager I also can't find any WLAN card. In device manager there is an icon * devices * with a qustion-mark and he said * network control *.
  This is the WLAN card.

  Until I reinstalled Windows it worked fine so the problem is not mechanical.

  Help, please. my laptop satellite pro m70, don't model no psm76e/00e005g3

  Hello

  If the normal LAN card is already recognized correctly need wireless network card, then you should try to install the WIRELESS driver from the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, the local network card device can be activated with the hardware switch on the computer laptop and FN + F8.
  Check it!

  Good bye

• Satellite Pro L450D - 12 X is not booting from the windows startup screen

  Hello, my laptop Satellite Pro L450D-12 X has been set up on and after awhile, window repair system popped up.
  After a long time he closed and restarted, but it does not start at the windows logo screen. It just stops after the splash screen and the screen goes black.

  Please can someone help?

  Hello

  Looks like the system is corrupted
  Try HARD drive recovery

  Turn on the device, press F8 and choose fix my computer.
  Now choose the recovery of HARD drive in the list of available options.
  This should set the camera back to the factory settings

  But this procedure works only if the HARD drive is OK.
  If the HARD disk is not OK, it will not work

• Satellite Pro A300-15 t does not restart on the current after BIOS update

  Hello

  There is something wrong with my Satellite Pro A300-15 t. I made an update of the BIOS of toshiba recently with the latest Web site and it installed successfully. But after the installation, I noticed that my laptop does not restart when it is connected to the power adapter. It restarts and works perfectly when its power on the battery.

  After restart or start-up the laptop (on battery), it will be well when the adapter is connected.

  But, when I reboot when the adapter is connected, after his stop, just power light turns on for a second or two and gets off automatically. And not even the laptop starts manually by pressing the power button (LCD is turned off when the power light comes on for 2 seconds) when the adapter remains connected.

  So what I do is to pull the plug on the adapter, then start the computer manually by pressing the power button and reconnect the plug of the adapter to the laptop starts. It works well this way. Rest everything works perfectly.

  And this problem started after the update of the BIOS. Now, I don't know how to remedy the situation I don't know if there was a bug in the last update of the bios.

  Details of the update from: http://gulf.computers.toshiba-europe.com/innovation/download_bios.jsp?service=AE

  30/07/08
  Update the BIOS
  This Bios update adds functionality to your system.
  Satellite Pro A300 Toshiba of 3, 60 - WIN

  So please help me to solve the problem.

  Thank you best regards &,.
  Manjit M.

  Hello

  Try to update the BIOS again
  In addition, access the BIOS settings and set the default parameters. Save it and try again.

  Good bye

• USB microphone is not listed in the Audio of first drop down hardware

  Hi all.

  First of all, I would be grateful very gladly any idea here because I'm totally stuck with this tent to record a voice on the track.

  The title is pretty self-explanatory. I work on Mac OS X and first Pro CS5 and I would like to record an audio track, but the USB microphone is not displayed. I have already read several forum discussions and followed the steps, but this problem has not yet been mentioned.

  That's what I did several times without success:

  1 - Connect the USB cable and check that MacOS recognizes. It works very well.

  2 - in Premiere Pro mark taken as a track record. Error message because no input device has been declared.

  3 - premiere Pro > > Preferences > > Audio-Hardware-> no microphones on the menu drop down.

  4 - Open audio and Midi and I add all microphones to Premiere Pro (Line-In, built-in and USB device).

  5-return to step 3: reopen the project > > Preferences > > Audio-Hardware-> Line-In and integrated appears, but not yet of micro USB.

  I was able to record with the built-in microphone, but I don't know what is happening to the USB one. In fact, if I go back to step 4 and open the audio and Midi, boxes that I had checked once reappear unchecked.

  I don't understand what is happening. Thank you in advanced for your help.

  I'm a PC guy, but if I had your problem I would try to turn off the microphone integrated and entry at the level of the BONE, so that the only possible option for the operating system and applications of line would be the USB microphone.

  I use a Logitech USB headset and Pr CS6 has no difficulty to recognize or record with her.

  Jeff

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• Satellite A100 CD/DVD drive is not listed in the BIOS or Device Manager

  1. the original drive does not work. After inserting a disc shines the light of the drive and it runs - but nothing else.
  A little investigation shows no optical drive listed in the BIOS or Device Manager (naturally).

  2. perhaps I would reinsert the disc, but I can't find any instructions on internet about this disc removal/replacement.
  Or in the operating manual.

  Can someone direct me to these instructions?

  Thank you very much

  S manual is not the same thing as maintenance manuals. Please note that this is not the same and the exact description on laptop procedure disassembly is only authorized service.

  Anyway, as far as I know the optical disk drive is fixed with a screw and it can be removed from the underside. The screw is placed near the cover of exact memory on the optical drive. Not on side cooling event, but on the other side.

  Be careful because everything you do is at your own risk.

• HP Pavilion dv7-3170ez: volume indicator not showing when the volume control

  Hello

  I own a Pavilion dv7-3170ez and when I change the volume using the slider button in the volume on top of the keyboard, the volume is adjusted accordingly, but no volume indicator appears on the display.

  Previously, when you adjust the volume, a speaker icon with a cursor jumped in the middle of the screen showing the current volume level.

  I use Windows 7 Home Premium and Windows Update and HP update shows that I have the latest version of the software. Also, I have the latest version of the BIOS installed.

  Note: the touch buttons on top (volume, speaker and enable wireless, etc) stopped working a few days after the disappearance of the sound meter, I have fixed that by connecting battery power and disconnectiong for awhile. However, the indicator is still not displayed. Don't know if this is related (I guess not).

  Thank you

  The Volume OSD is a HP MediaSmart Menu function. He has to load at startup. To do this, go to msconfig and make sure that it is enabled under the Startup tab...

  If she is not there, you can download it here... ftp://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48552.exe

• Satellite Pro U400 - remove password BIOS PSU41E, cannot find the rider

  Hello, I need urgent help, I'll try to find the jumper to reset my BIOS password, as I forgot, I've been on many sites but could not find a diagram of my Board of Directors - U400 INTEL motherboard A000029990

  Please can someone help.

  Serial number: 68061144W

  Thank you

  Chris

  Hello Chris

  You know very well that the BIOS password is characteristic of very important security so we cannot discuss about this in the public forum. At least, you can't wait can we discuss this topic on the forum of Toshiba.

  BIOS password is important for many laptop owners who want to protect their laptops and stored data. This explanation here can be abused and each laptop stolen with protection of the BIOS can be unlocked.

  Toshiba provider in your country can help you with this.

• Satellite Pro U200: VGA output works not properly when the AC adapter / CC has been connected

  Hello

  I have a problem with vga output. When I'm working on the battery and connect my laptop to external monitor is ok, but when I connect adapter then start waving also bluetooth and wlan is not working properly. In other cases when I disconnect laptop battery and connect the AC adapter it works correctly.

  Thanks in advance

  Hello

  Can you please describe more precisely what is happening here? Does not properly is a rather general statement.

• touchpad not working not properly and the volume control is not displayed

  I have a HP Pavilion g6, and just recently, I noticed my 2 finger scroll stopped working. In order to use it, I have to go and open the "Synaptics Touchpad" whenever I start. Once I open and close my scroll is working again. Is it possible to keep on? Also, when I adjust the volume, no display on the middle of the screen there is more to show how high or low I'm adjusting! These things just stopped working it a month ago and I have no idea why!

  Hello

  About the touchpad, start by downloading the latest installer Synaptics driver on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59727.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  When windows has reloaded, you may now need to configure the options require you for the touchpad - open windows control panel, open the mouse, select the tab settings of the ClickPad, then click the button settings ClickPad.

  With regard to the on-screen display, download and reinstall the following.

  HP utility screen.

  Kind regards

  DP - K

• Satellite Pro U400-18 s faulty motherboard

  My friend Satellite Pro U400-18 s will not start.
  Pass the initial Toshiba screen, I had to check it out for the PC tech guy, and they could not get pass this screen as well. However, they confirmed that the hard drive has been authorized. They suggest that the motherboard is broken?
  Can anyone help? And where can I get a replacement from? I have no recovery disks, like most of the GUY's, I have not read the instructions.

  Any help would be really appreciated

  Who are these guys from tech PC? Maybe Toshiba service provider?

  To get the new motherboard will be problematic, so I recommend you contact the nearest authorized Toshiba and ask for help. They can order the new Board of Directors for you.