deformation of the text corresponds to Diamond

Similar Questions

• How to change your spacing in Adobe Reader? The text properties box all have font style, spacing, color etc, but I have found corresponding to the spacing of the characters. Help, please!

  I opened my PDF file in Adobe Reader, the properties of the text box is there, but there is no option for the spacing of the characters. Is there option initially? If so, how can I find?

  Thank you very much!

  Adobe Reader can not handle the content of a PDF page.
  Comment tools available in the contemporary current out of the drive are annotations.
  The annotations are not content of PDF pages. On the contrary, annotations exist separate from the content of the PDF page.
  While most annotations provide us with a Properties dialog box with which we can make a configuration this configuration is more limited tools to edit Acrobat text and Images or add text.
  These tools are not available in Adobe Reader.
  These tools allow the editing of the content of the page PDF (strings and characters).

  So, to accomplish what you want, you'll want to use Acrobat.

  Be well...

• Need to throw an exception after a test of text corresponding to the openscript

  Hello

  I want to check a text using text matching test and I want to throw an Exception if the text is not there. If the text is there she must either continue normally.

  I tried this test of text matching. According to this, it's getting abandoned after

  () Web.document

  "\"/web:window[@index='0 "or @title ='Oracle BI interactive dashboards - Advance Planning']/web:document[@index='0']\" ").

  .verifyText ("Check result", "export",

  Source.DisplayContent, TextPresence.PassIfPresent,

  MatchOption.Exact);

  After this way can anyone please explain me (code)

  Concerning

  Harsha

  If you give verifyText(), script not give up failure, IE. script displays a warning text not found in HTML content

  If you give assertText(), the script will stop in case of failure.

  To throw an exception when the text is not found, use try-catch as follows...

  try {}

  Web.Window ("/ web: window [@index = '0' or @title = 'Oracle BI interactive dashboards - Advance Planning']/web:document[@index='0']")

  .assertText ("Check result", "export",

  Source.DisplayContent,

  TextPresence.PassIfPresent,

  MatchOption.Exact);

  }

  catch (System.Exception e)

  {

  failure ("could not find the export text");

  }

  
  

  See you soon,.

  Dembélé M

  [email protected]

• Adding text with the text tool corresponds to the resolution of photo

  I discovered that, although the resolution of the image is of no consequence when the sizing of the images in pixel dimensions, it is always important if you decide to add information of copyright with the text tool.

  for example, I received pictures of several people, all sizes of 1024 pixels in width, but I wanted to add their names to the front of the images before putting the images in a slideshow.  I quickly discovered that, even if the images are identical pixel seen, applied names vary in size according to the resolution of the image.

  Because different brands of cameras assign a different resolution to the images taken with this camera, I needed to change the resolution of images to be all the same before I could add the names appearing in the same size.

  It was a surprise for me.

  Mary Lou

  I think we are saying the same thing.

  "Now, Type is expressed in points and points are defined as 72 points per inch for output format."

  This is the information that I needed.

  When people send me images that are all in 1024 x 768 in size in pixels (I'll stop using the word 'size') the size of the font that I choose to use appears differently on these images, depending on their output resolution.

  There is no way to avoid having to adjust the resolution of output of these images, if I want to have text added (via the text tool) that appears the same size on all images.

  Now, I can explain why this is happening.  I hope this is helpful to others reading this.

  Thank you.

  Mary Lou

• How can I replicate this TV analog warping effect on the text?

  

  I tried to use the deformation of the puppet, but the creation of additional points seems to give no natural curves "kinks" that do not correspond to the effect that I am trying to achieve.

  I also see a kind of duplicate the effect happening, with a second "blackout" that kind of fate from the top, but I'm less worried about it. I was wondering how to get this kind of deformation. Can anyone help?

  It is feasible, but needs a bit of user input.

  Stretching of the text without blocking the Rails at the top and bottom to the top is the first problem, but you can get round that with content aware scale.

  1. Fixed the text and the pixelation.
  2. Drag the rectangular selections on the bottom and at the top of the text and save the selection.  (I should probably slip a third selection around the cross bar 'B').
  3. Select all > Content Aware scale > Protect in the Options bar, and then choose the selection that you have saved.  Stretch the text.
  4. Now just bend fluidly, adjusting the brush size and pressure in function.  (I tried other options, but fluidity was the only one which does not soften the edges.)

  I would say pretty close to your original.

  

• How to change the space between folder icon and the text on the personal toolbar?

  I have some files in the personal toolbar with just a letter to indicate what they are, but on the theme that I use, the letter is too far from the record, it belongs to and partially falls under following folder icon. I don't want to increase the space between all the icons to show the full letter, as this decreases the amount of icons that you can have in the toolbar. Instead, I want to reduce the space between the file and the text belonging to him, so he is right next to him instead of 5 pixels away.

  I found various entries to change the padding and margins in userChrome.css, but it's always around the icon, I don't know where to look to close the space between the icon and the corresponding text.

  Any help would be greatly appreciated, thank you.

  Did you check the value of the left margin of the text?

  You can set if necessary negative margin values.

  #PlacesToolbarItems .toolbarbutton-text { margin-left: -2px !important; }

  Add .bookmark-item [container] If this enough for the items in the folder

  #PlacesToolbarItems .bookmark-item[container] .toolbarbutton-text { margin-left: -2px !important; }

• Change the text displayed, based on the threshold value

  Hi users of Labview,.

  I need help with display and editing text in labview.

  The text should display and change according to the following conditions:

  0 volt - "no power".

  1 volt - "controller ON".

  2 Volt - "Rotor Running"

  3 volt - "Rotor stopped".

  Based on the voltage read by the channel, the text must be displayed and modified on the same area of the front panel. For example, initially it will be 0 Volt and the text "No power" should appear as an indicator of text (and not as a warning message). He needs to change ' controller we ' when the chages of voltage from 0 to 1 volt. The canal reads the analog input voltage (range 0 - 5V).

  I'm relatively new to labview. So please give me pointers or from suggestions on how can be done. Any help is greatly appreciated.

  Thank you

  REDA

  Hello

  Thanks for the crossrulz of notes, have not used the front threshold.  For this simple example, it is "symmetrical", but I can see how the values in the table have been does not correspond to the index position that is so true useful.  Learn something every day, I could not resist, wanted to try.

  OK, here's a sample VI that puts a custom message based on the crossing of a threshold.  Home work is to study the components before asking to :-)

  The dice are the analog signal of 0 to 6.   He rounded to the whole number to provide the index number.  Power is the index number in the index table, the table being hard-coded text messages.

  Two additional indicators may be deleted, useful to see what is happening.

  And get rid of the value 0 if you want the text to match the number, he he he

  Enjoy.

  

• Can I change the text in 3D in Windows 7 to mine screensaver?

  Can I change the text in 3D Screensaver in Windows 7?

  Can I change the text in 3D Screensaver in Windows 7?

  Hi Patty,.

  Yes, you can certainly - here's how:

  1. right click on the desktop and choose "Customize".
  2. Select screen saver icon in the lower right of the box to 'change the visuals and sounds on your computer.
  3. Select '3D text' on the drop down and select "settings".
  4. from here you will have a series of options, one of them will be an option button under "Text" to choose or time "personalized text".
  5. change the "Custom" text in any text you want to display...

  (If this post was useful ("useful Vote") or response ("mark as answer") your question, please click on the corresponding button to help others find the answer more quickly.) Besides, if you feel that someone else has been useful, mark them too. Also, if you have any othercomments please let us know.)

  Hope this helps,

  Steve <> Microsoft Partner

• Get the text in the Edit field

  Hello

  In my Application, I add a check box and a label field and a field change a grid field Manager. Then this network domain manager, I add several times in Vertical field Manager. So it's looking like list of items. Now, when I checked the box five, trying to get the text of the corresponding edit field.

  This is the code for the domain network manager:

  int c[] = {screenWidth/6, (screenWidth)/3, (screenWidth)/2};
          gm = new GridFieldManager(c, Manager.VERTICAL_SCROLL);
          Logger.out("Grocery", "Here it is coming"+i);
          cbfChecked = new CustomCheckBoxField();
          cbfChecked.setChangeListener(new FieldChangeListener()
          {
              public void fieldChanged(Field field, int context)
              {
                  if(checked[i] == false)
                  {
                      checked[i] = true;
                  }
                  else if(checked[i] ==  true)
                  {
                      checked[i] = false;
                      Logger.out("Grocery", "It is UnChecked" +checked[i]);
                  }
              }
          });
          gm.add(cbfChecked);
          Logger.out("Grocery", "Adding first Label Field");
          LabelFieldCustom lfFrom = new LabelFieldCustom((String) m_vtrItems.elementAt(i),Color.BROWN,FONT_FAMILY_0_SF_AS_16,Field.FIELD_LEFT);
          gm.add(lfFrom);
          Logger.out("Grocery", "Adding second Label Field");
          efcAmount = new EditFieldCustom(Bitmap.getBitmapResource("dob_text_box.png"), 25);
          efcAmount.setMargin(new XYEdges(30, 0, 0, 0));
          gm.add(efcAmount);
          return gm;
  

  Here I add the grid domain manager several times:

  for (int i = 0;i < m_vtrItems.size();i++)
          {
  
              vfm.add(getRow(i));
              vfm.add(new SeparatorField(SeparatorField.NON_FOCUSABLE));
  
          }
  

  Here is the snapshot of my screen:

  Please help me.

  You can access the field by index (prone to errors if).
  or you could save your fields in a data structure, such as a hash table, with the checkboxfield as key to the editfield as value.
  or...

• Oracle Text corresponds to unexpected lines

  Hi people:

  I use Oracle Text in Oracle 12 c to search the text for a column that is indexed as follows:

  We will examine these lines.

  • Table X

  Text
  90-SE
  90-BA
  Hello

  I want to search the text "90-SE", then I did the following SQL query:

  SELECT TEXT, SCORE (1)

  X

  WHERE CONTAINS (TEXT, '90\ - SE', 1) > 0;

  The result is:

  Score (1)	TEXT
  5	90-SE
  5	90-BA

  I can't understand why it is corresponding to the line containing 90-BA.

  Thank you

  ytor

  I am unable to reproduce your error, but I do not know what lexer attributes and others you may have.  I don't know if you are aware that unless you set the hyphen as a printjoin it is not indexed.  Please see the demo below, noting the differences in the token_text.

  Scott@ORCL > select version banner $ v

  2.

  BANNER

  --------------------------------------------------------------------------------

  Database Oracle 12 c Enterprise Edition Release 12.1.0.2.0 - 64 bit Production

  PL/SQL Release 12.1.0.2.0 - Production

  CORE Production 12.1.0.2.0

  AMT for 64-bit Windows: Version 12.1.0.2.0 - Production

  NLSRTL Version 12.1.0.2.0 - Production

  5 selected lines.

  Scott@ORCL > create table x

  2 (text varchar2 (60))

  3.

  Table created.

  Scott@ORCL > insert all

  2 in the x values (90-SE "")

  3 in x values (90-BA "")

  values ('Hello') x 4

  5 Select * of the double

  6.

  3 lines were created.

  Scott@ORCL > create index x_text_idx on x (text)

  2 indextype is ctxsys.context

  3.

  The index is created.

  Scott@ORCL > select Dr. token_text $ x_text_idx$ I

  2.

  TOKEN_TEXT

  ----------------------------------------------------------------

  90

  BA

  Hello

  IS

  4 selected lines.

  Scott@ORCL > SCORE (1) SELECT, TEXT

  2 X

  3. WHERE CONTAINS (TEXT, '90\ - SE', 1) > 0

  4.

  SCORE (1) TEXT

  ---------- ------------------------------------------------------------

  4 90-SE

  1 selected line.

  Scott@ORCL > start

  2 ctx_ddl.create_preference ('test_lex', 'basic_lexer');

  3 ctx_ddl.set_attribute ('test_lex', 'printjoins', '-');

  4 end;

  5.

  PL/SQL procedure successfully completed.

  Scott@ORCL > drop index x_text_idx

  2.

  The index is deleted.

  Scott@ORCL > create index x_text_idx on x (text)

  2 indextype is ctxsys.context

  3 parameters ("lexer test_lex")

  4.

  The index is created.

  Scott@ORCL > select Dr. token_text $ x_text_idx$ I

  2.

  TOKEN_TEXT

  ----------------------------------------------------------------

  90-BA

  90-SE

  Hello

  3 selected lines.

  Scott@ORCL > SCORE (1) SELECT, TEXT

  2 X

  3. WHERE CONTAINS (TEXT, '90\ - SE', 1) > 0

  4.

  SCORE (1) TEXT

  ---------- ------------------------------------------------------------

  4 90-SE

  1 selected line.

• To create a text box with a colored background but the text didn't appear not

  I'm doing a map of color-coding. It's just a black and white base card, but I filled in the cities with different colors using the paint bucket tool, to show which region they belong to.

  At the bottom of the map is a list of five regional offices and the offices of the area covered by each of them. I was hoping to create a box around the text, and then fill it (the box) with the color that corresponds to that particular region.

  Using the rectangle selection tool, I call a box around the text and filled with color. The opacity is set to 100%, so the text behind it disappeared completely. If I reduce the opacity of the text appears in grey, but I want the text to stand out and to be black.

  Using the Horizontal type tool I tried to redo the text everywhere again. However, the text I typed (see the text layer name) was not appear.

  Then I went in the character window and clicked rest character, hoping that the text arise, but it still does not work. The blue fill layer covers the original text, but is there a way to keep this original text, always be black, in order to keep the blue background? Or redo the entire text again in a new layer (as I tried to do below) would make more sense?

  

  Change the blending mode of the layer of color, darker color should work well.

• change the text typed on a photo/drawing/product

  

  the step by step process?

  The pixels that form the lettering on this image are probably embedded in the image (i.e. are rasterised), so it cannot be changed. The best procedure to change the lettering would be to remove the text using say the tool clone, then creates the text once again on a separate layer, choose a font matching and color, and then use the deformation tools to resize, it warp and place it in place to replace the old text. Then save it as a JPG file for other uses, such as on a Web site.

• My requirement is, if we click on the POP UP LOV element so I want the dependent value of this item in column of the text element in a table.

  My requirement is

  If we click on the POP UP dot LOV button then I want the dependent value of this item in column of the text element in a table.

  How do I get this as a table?

  Hi Dan,.

  I have a table, in the first column is popup LOV.and second column key is text element.

  So my question is if we click contextual key lov and select employee name, then I want to show the email address of this employee in the second column of tabular presentation.

  This can be done with AJAX. Write a JavaScript function on the onchange event of popup LOV item (Employee) key and pass the number of the employee selected to your AJAX call, go get the employee email and assign it to your entry corresponding to the key LOV popup text has changed.

  As your dealing with Form (Wizard Based/APEX_ITEM Based-not specified) in a table, you take insofar as each column is the table of elements mapped to APEX_APPLICATION input. G_FXX tables and therefore to write JavaScript to locate the item to update.

  I hope this helps!

  Kind regards

  Kiran

• ATTRPARENT dimension of the text attribute to several levels of construction with a rules file

  Hello

  My first post here.

  I'm trying to create the dimension generation rule to create a dimension of the multilevel text attribute and then combine with the basic dimension.

  So far, it is difficult.

  With regard to my experience:

  -J' have a relatively basic understanding of the rules of charge both with regard to the data loads and define the updates - I find this quite confusing area and the documentation does not help that much

  -J' only started using dimensions attribute, so for me it's a new concept, but we are already quite useful in certain applications

  -J' I try to automate the process of construction of dimension attribute, and then associating attributes with the basic dimension

  I use the following documentation as a guide:

  Building size attribute and associate attributes

  http://docs.Oracle.com/CD/E12825_01/EPM.111/esb_dbag/frameset.htm?dotdimb.htm

  and / or

  Work with the attribute multi-level Dimensions

  http://docs.Oracle.com/CD/E26232_01/doc.11122/esb_dbag/frameset.htm?ch21s06s05.html

  (essentially the same source in both cases)

  The ultimate goal is to replicate one of our existing recently created attribute dimensions of a cube to another.

  I built a few versions of the required flat file and the corresponding rules file, but none worked.

  I tend to get the following validation error message:

  This field is defined as an ATTRPARENT. The following column must be a field of association attribute type.

  As I got stuck so I gave to the current actual attributes and moved on to experimenting with the sample / base cube.

  I built a flat file that is supposed to create a new dimension of text attribute named ABC with two attributes level structure:

  ABC

  A

  AA

  AB

  B

  BA

  BB

  and associate it with the dimension of the product in the following way

  200-10 AA

  200-20 AB

  200-30 BA

  200-40 BB

  The flat file looks like this:

  "AA"      "A"         "200-10"               "A"         "AA"      "200"

  "AB"      "A"         "200-20"               "A"         "AB"      "200"

  "AB"      "B"         "200-30"               "B"         "AB"      "200"

  "BB"       "B"         "200-40"               "B"         "BB"       "200"

  and the rule file has 6 matching columns with titles as follows:

  Level0, LEVEL1 ABC, ABC Level0, product ATTRPARENT0, ABC ABC0, LEVEL1 product, product

  all agree with what the documentation says.

  The first 2 columns are intended to define and create the dimension of the attribute, while the 4 next make association...

  I couldn't the above rules file to validate.

  The same validation error message appeared as previously:

  This field is defined as an ATTRPARENT. The following column must be a field of association attribute type.

  However when I tried to actually update the outline of the mistakes of dimbuild.err file has been created which gives some additional clues:

  \\ATTRPARENT column 4 must precede a numeric or datetime column attribute association

  Now... Finally the interesting part...

  Back to the documentation...
  

  I don't mind if the size of the attribute is generated and then those associated with step or in two separate steps.

  I try to do both tasks in one step only because that's what the documentation seems to suggest attributes at several levels.

  First of all I read:

  Note:

  If you work with a multilevel dimension attribute or with a dimension of the attribute of the digital type, Boolean, or date, the rules file requires an additional field. See working with Dimensions of the multilevel attribute.

  Yes, I work with a dimension of the multilevel attribute so the above statement applies (I guess) and so I'm going to see what works with several levels attribute Dimensions has to say.

  Then, I read:

  When an attribute is part of a digital multi-level, Boolean, or dimension attribute date, the source data must include columns for all generations or the size of the attribute levels.

  Fair enough... so I do what they say... my attribute dimension is at several levels, so I can assume that the statement above applies...

  So, I build my rule in accordance with the guidelines above.

  And then, as we have already mentioned, I get the error message about ATTRPARENT and when I read, it turns out that ATTRBPAREN cannot be used for numeric or date attribute dimensions !

  I'm totally confused at this point.

  What about the attribute text multi-level dimensions ?

  They are several levels but they are NOT numeric or date those!

  The documentation does not seem to tell what to do in this case...

  Anyone build something like that?

  What is the thing that I'm missing?

  What about

  I'm glad that you got to work. I tested and that is to create the dimension attribute and associate it with the rule of the load.

  You could ignore the construction size manually. Remove the attribute dimension. The rule1 go for the Dimension settings under the definition of Dimension tab. Then right-click on the product and change the properties. On the attribute tab, add 'Test' or whatever you want to call the attribute, and assign the text type. He adds the attribute and associate it with the basic dimension when it create the hierarchy. Note that the rules could actually be reversed where you create members of level 0 and then more later to create the hierarchy.  Of course you must pass the size of the attribute association to the other rule

• Need help for the button to trigger on the text caption effect

  Hello world

  I work in

  

  on a Mac (chart below)

  

  I'm very new to Captivate (only my second week), but am familiar in other Adobe programs. I'm trying to get a dynamic object that I made in a button to trigger an effect on a text caption. I scrolled the forums here and tried various things of the advanced actions for just using the drop down menus in the property inspector and nothing that I tried gives me the result I want.

  Here is a screenshot of what I'm working with.

  

  What I want to do is for the arrows for the buttons (and they are currently). When the slide appears first I don't want that image and the arrows visible. So when the user clicks on the arrow, I want the effect I chose (spiral) that will be triggered with the corresponding text.

  Looks like my property for each caption Inspector (the names are different for each)

  

  And I also tried to write a few advanced Actions that follow as well as tutorials that I found online, and nothing gives me what I want.

  When I preview the slide I can see everything on entry and then when I click the button to apply the effect. I rechecked the advanced actions and usually when I try these nothing happens at all.

  Is - it there anyway that I can get that works this way, I'm wanting. It seems that it should be simple and I'm right on it.

  The shape of buttons are all pause at this moment, it's OK.

  I just tried it out and see what you mean. The text is there from the beginning, and that shouldn't be the case. you expect it not to appear when the button is clicked. I have never used this spiral effect myself, but since you have no control over it, I mean you can't see where starts the effect at all, there is no visible path you have with the other effects of the entry. Either, you need to create a custom, effect whose path begins with text outside the scene, or a combination of an Alpha to + a standard entrance effect.

  Tried the first one with a simple left to a straight path. I edited the paths so that they all start at the same position horizontal and end at the same horizontal position. So happy with the leaders and Guides that we finally got in Captivate, they are very useful for this type of design:

  

  It's the chronology: