Hi guys. How can I remove database with file init lost? I just want to recreate the database (with recovery or restoration of the process)
1. I can't start because I do not have init. 2. I can't delete the database because I can't start. 3. I can't recreate database using dbca as the same name somewhere is:)
Published by: America on January 18, 2009 12:03
When you run "dbca" you can select "delete the database" and find the old name of the database? If find... You can select and delete... dbca will ask... But you and click on remove in any case.
We check if our backups are valid or not. So it gave me a new server and backups/archives to a 2 TB database I need to restore/recovery. I followed steps below.
(1) copied the prod parameter file to test.
(2) make the necessary changes in the init file.
db_file_name_convert, etc..
(3) start db in nomount mode.
(4) restore the backup control file
Restore controlfile to ' / oraback/ARCH/prod/backup_controlfiles/c-250795000-20141030-01';
(5) mount the database.
(6) created under the rman script and executed.
Run {}
Catalogue start with ' / oraback/RMAN/test "noprompt.
Catalogue start with ' / oraback/ARCH/test "noprompt.
allocate channel C1 device type disk;
allocate channel C2 device type disk;
allocated channel C3 device type disk;
allocate channel C4 device type disk;
allocate channel C5 device type disk;
allocate channel C6 device type disk;
allocate channel C7 device type disk;
allocate channel C8 device type disk;
@rename_datafiles.lst
@rename_logfiles.lst
until the SNA 144390584718.
restore the database;
switch datafile;
recover the database
}
Questions-
-Restore completed successfully, but I found that few archives are missing.
-I pulled from database to recover until cancel using backup controlfile; There is a below error
ORA-01152: 1 no file has been restored from a sufficiently old backup
ORA-01110: data file 1: ' / u02/oradata/testsystem01.dbf'
-Then tried to restore the archive of available backup archive and few of archives have been restored.
i.e. of sequence between 759529 and 759552.
And then I pulled the database until cancel using backup controlfile recovery and I got errors below.
SQL > restore database using backup controlfile until cancel;
ORA-00279: change 144185396330 September at 26/10/2014 to 08:14:01
After you create the database, it is automatically saved with the listener. I am not registered the database with listener then how it registers itself automatically with the listener. How a registry database that is automatically saved.
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on December 29, 2011 16:03:09
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=dog1050) (PORT = 1521))) STATUS of the LISTENER ------------------------ Alias LISTENER Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production Start date December 29, 2011 16:01:07 Uptime 0 days 0 h 2 min 1 sec Draw level off Security ON: OS Local Authentication SNMP OFF Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file The listener log file /U01/app/Oracle/diag/tnslsnr/dog1050/listener/alert/log.XML Summary of endpoints listening... (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=dog1050) (PORT = 1521))) Summary of services... Service 'db11g' has 1 instance (s). "Db11g", State LOAN, has 1 operation for this service... Service 'db11gXDB' has 1 instance (s). "Db11g", State LOAN, has 1 operation for this service... The command completed successfully
Thank you Knani K
> By default, the PMON process stores information about service with his local listening on the local address by default TCP/IP port 1521 >
Please read more http://docs.oracle.com/cd/E11882_01/network.112/e10836/listenercfg.htm#CHDCCHIC.
When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please use widows xp
Hello
Have you tried to Hibernate for ever in the power settings option?
To resolve this problem, you can follow the steps below.
(a) click and start
(b) type power Option in the start search bar.
(c) now select click Change plan for the current plan of the selected power.
(d) now click on advanced power settings.
(e) scroll down and click on the sign more next to sleep.
(f) now click on allow the eve hybrid and turn it off.
(g) click on the option put into hibernation after and set it to never.
Could you please provide steps or relevant link to remove the Oracle database in the Windows platform?
Oracle - 11.2.0.3.0
OS - Windows 2003 32-bit
Kind regards
Bala
In fact, I wouldn't use these steps. The main reason is that the DROP DATABASE command will not remove this annoying service. Instead, I would check the database is running, and then use the DBCA Wizard to delete the database. Not only this delete the database for you, it will be also make you the Windows registry (and therefore service) are supported properly.
Can someone tell me please how to enter Oracle Database Vault with a database from command line without using DBCA.
The doc oracle E23090-10 provides only through the DBCA Wizard. I'm having some trouble with my software x - manager, so I cannot use the DBCA Wizard and seeks to enter the vault of the database with the database by command line.
Oracle database Vault is already enabled through 'chopt enable lbac' and 'chopt enable dv. Now all I do is register with the databases on the server.
Thank you
Hi DK2010, actually I found my answer in the metalink Doc ID 803948.1
I have to run the dbca in silent mode and at the end of this doc, it's exactly what I need.
"
DBCA-silent - configureDatabase
sourceDB-
[- sysDBAUserName
-sysDBAPassword ]
-addDBOption DV, WHO
-dvUserName
-dvUserPassword
-dvAccountManagerName
-dvAccountManagerPassword
"
Now, the keystone of the database is registered with the database.
I need to create a database with the character US8PC437 (platform Linux Redhat 5.4 64-bit, database version 11.2.0.3), but this character set do not appear when I create the database with the database assistant (DBCA).
Any help will be apreciated.
Best regards
Antonio Serrano
Published by: albrotar on March 6, 2012 09:14
While AL32UTF8 is certainly recommended for the Oracle database character set, use only, if your application provider has confirmed that their application will work with a set of characters to multibyte database.
To create a database US8PC437 (it is rarely a choice, in fact) with DBCA 11.2, select the "character sets" tab, once shown, then select the option 'Choose from the list of character sets' and uncheck 'Show recommended only character sets '. This will add US8PC437 to the "Database character set" drop-down list. Select "US8PC437" from the list and continue the process of creation.
But first, contact your provider and ask a compatible Unicode version of your application.
Does anyone know who is the chosen database when just to connect with 'sqlplus user/user' (without the @DEV01 or @DEV01_local)?
Any help will be appreciated!
Rgds
Jan
When you connect to the local database that is connected to the server01, you need only specify the sid in the environment, in this case, Oracle tnsnames file to connect, actually uses, it uses any of the listener. It uses what is called a connection needed. It is purely a side connection server, and as long as the sid is located in the environment resolves to a database running on that server, you will be get connected.
When you connect using the @connect_descriptor, like you second case, then Oracle will use the configured naming, including tnsnames, methods to solve the 'real' database In this case, the auditor is required to create the connection to the database.
Hello everyone, my requirement is to delte the database when we uninstall the application, I did a quick search in the forum, did not meet any results, hope that someone would be comup with an answer to my question.
Help of any kind is welcome!
A Y
Hi avi_yach,
The files are not deleted on uninstall.
You can try and set up a CodeModuleListener or add an application which will remove your files once your original application has been uninstall.
We have a RAC 11 GR 2 to 4 knots on EXADATA machine system. While we strive to connect with easy connect method as
sqlplus system $ / password@node1-vip:1521 / ORCL
It will correctly connect to the database. But while we use IP SCAN:
sqlplus system $ / password@node-scan:1521 / ORCL
It returns, ORA-12514: TNS does not currently of service requested in connect descriptor.
However, the local settings and remote listener with correct values and nslookup return correct results. Please, advice on that.
Kind regards
Ali
Local settings and remote listener were correct, that the listener SCAN was not record instances were. As a result, we removed and again fix the SCAN with grid services and then save instances with SCAN. So, it worked. Thanks to you two!
I have a problem with a database of oracle 11g XE on windows server 2003, the database is in production, it is open, is operating normally.
The database has no backup configured before, so I put the database archiving mode and tried to backup using rman utility, but it show me some errors.
First of all, it showed me:
ORA-19501: error in reading file... SYSAUX. DBF
ORA-27070: async read/write failed
OSD-04016: error queuing an asynchronous i/o request.
And when I passed the dbv on the SYSAUX file utility. DBF showed the fatal error.
So, I switched CHKDSK utility on windows to repair the disc of the error. After that, run utility dbv and he passed and showed me the corrupt on SYSAUX blocks. DBF
Then, came to rman and ran:
RMAN > validate the logical database checking;
State of the file marked corrupt blocks examined empty blocks high YVERT
Finally I try to rerun rman and he shows me the error:
ORA-19566: exceeded the limit of 0 blocks corrupt file C:\ORACLEXE\APP\ORACLE\ORADATA\XE\SYSAUX. DBF
How can I do backup with rman? Maybe I can by pass the corrupt block?
I'll be grateful for any help you can provide.
=)
It would be better if you try to find the reason of corruption and try to recover the corrupt blocks. A block corrupted in the backup would really not must use. But if you're ready to take backup, you can ask RMAN to ignore corrupt blocks and move forward.
on my machine Windows 7 with Oracle Client installed 12.0.1.0, I'm trying to create a database link to a database server, which runs on Oracle Standard Edition1 11.2.0.2.
When I connect to sqlplus on the client with "sqlplus/nolog" and type the command:
SQL > create SID of the database link
connect to the user identified by passwd
using "tnsnames.ora connection."
I have a SP2-0640: not connected. OK, it is clear, because I use sqlplus with option/nolog. But client-side normally I have no database, where I can connect. So I think, there is no user, or?
The database to which I want to connect is located in tnsnames.ora.
Generally: Is it possible to use the Oracle Client to create a database link? Maybe there's another way to do this?
A big thank you and best regards,
David
You don't seem to understand the concept of a database link.
A database link connects two databases. Not a client and a database.
You need to link up in a data source to a target database.
The only thing you need is a client of sqlplus in sqlplus client, you need to connect to the source database.
If you can't connect to the source database, you must present the statement to someone.
Hello gurus, I have a problem with RMAN, I'm trying to 'Cloning' an Oracle Instance with RMAN database and I have several errors, but I checkk all Forums and documentation I have 2 servers in 10.2.1 in Solaris and other in 10.2.4 on Linux And I'm running in my 1Mode of the server as follows: RMAN target connection. connection Assistant sys/manager@TESTDB10_SITE2.world run { allocate auxiliary channels ch1 type disk; the value of newname for datafile 1 to ' / u02/oradata/EVTM/system/system01.dbf'; the value of newname for datafile 2 to ' / u02/oradata/EVTM/system/undotbs01.dbf'; the value of newname for datafile 3 to ' / u02/oradata/EVTM/system/sysaux01.dbf'; the value of newname for datafile 4 to ' / u01/oradata/EVTM/data/users01.dbf'; the value of newname for datafile 5 to ' / u01/oradata/EVTM/data/tbs_tpaper_data_01.dbf'; the value of newname for datafile 6 to ' / u03/oradata/EVTM/index/tbs_tpaper_idx.dbf'; the value of newname for datafile 8 to ' / u01/oradata/EVTM/data/users02.dbf'; the value of newname for datafile 7 to ' / u01/oradata/EVTM/data/perfstat_01.dbf'; the value of newname for datafile 9 to ' / u01/oradata/EVTM/data/tbs_evtm_quest01.dbf'; the value of newname for tempfile 1 to ' / u02/oradata/EVTM/system/temp01.dbf'; duplicate target database to EVTM PFILE = ' / u01/app/oracle/product/10.2/dbs/initEVTM.ora' nofilenamecheck LOGFILE Group 1 ('/ u01/oradata/EVTM/rdo/redo1m1.log',) ' / u01/oradata/EVTM/rdo/redo1m2.log', U01/oradata/EVTM/RDO/redo1m3.log') SIZE the 51200 K,. Group 2 ('/ u01/oradata/EVTM/rdo/redo2m1.log',) ' / u01/oradata/EVTM/rdo/redo2m2.log', U01/oradata/EVTM/RDO/redo2m3.log') SIZE the 51200 K,. Group 3 ('/ u01/oradata/EVTM/rdo/redo3m1.log',) ' / u01/oradata/EVTM/rdo/redo3m2.log', U01/oradata/EVTM/RDO/redo3m3.log') SIZE the 51200 K; }
and I get the error:
channel ch1: reading of the backup/backup/ORA_BACKUP_EVTM/EVTM_291020091029_full_3aksvk4q_1_1 element ORA-19870: error reading backup total/backup/ORA_BACKUP_EVTM/EVTM_291020091029_full_3aksvk4q_1_1 ORA-19505: impossible to identify the file ' / backup/ORA_BACKUP_EVTM/EVTM_291020091029_full_3aksvk4q_1_1. ORA-27037: unable to get file status Linux-x86_64 error: 2: no such file or directory Additional information: 3 switch to the previous backup
output channel: ch1 RMAN-00571: =========================================================== RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =. RMAN-00571: =========================================================== RMAN-03002: failure of Db in dual at 2009-10-29 16:08:29 RMAN-03015: an error has occurred in the script stored memory Script RMAN-06026: some targets not found - abandonment of restoration RMAN-06023: no backup or copy of file 9 found to restore RMAN-06023: no backup or copy of datafile 8 found to restore RMAN-06023: no backup or copy of 7 found to restore
Question? Is it possible to duplicate/clone of Soalris in Linux? :-)))))
Is it possible to duplicate/clone of Soalris in Linux? :-)))))
You can not use the command DUPLICATE between platforms (see duplicate restrictions in the documentation). It is possible to perform a cross-platform via RMAN transport. This process is also explained in the documentation.
Werner
You have an additional complication, patch levels are different. Perhaps datapump here is a better solution - depending on the size of the database.
And I hope that Solaris on x 86-64 (no SPARC), otherwise the next complication.
I recently bought myself a black nylon band and a band Pink for my wife. Its pink and clings in the perfectly, mine broke at once to the glide above but now just around - genius claimed it was 'normal', but after reading this article on the Apple sit
When I launch Firefox 30, my favorite bar is empty. I have to deselect in view > toolbars, and select new it and they appear.Also, my refresh button at the far right of the address bar has disappeared and all I see is a magnifying glass.Another quest
I have not found the option scan using wireless since last week. There is only one option for printing. I have been using this printer on the analysis in half a year. However, if I change USB mode, the analysis option will be displayed. The USB mode
I have a Sandisk Sansa clip plus 8 GB. Recently, I switched from windows to Ubuntu, and even if the player is filled with music, the (MSC mode) folder is empty on the computer! I guess that's because I used windows/windows media player and MTP mode.