Delete the Enter frame event

Similar Questions

• Delete the reconciliation Pendng events

  Hi all
  
  I ran into this problem a number of times-, where I start a task of reconciliation misconfigured. Thus, IOM potentially then creates thousands of records that eventually fail and remain in the State of the event received. Due to a number of reasons, the processing time of reconciliation can last for hours. To avoid having to wait for a work of reconciliation already know will go nowhere, my question is this-
  
  How can I remove the tasks of reconciliation who are still in the queue / have not been addressed by the IOM? I would kill rather tasks that IOM is currently reconcile than to wait around the task at hand, especially if I know that these tasks aground.
  
  So far, I know a few things-
  1. the "disable" and "stop running" checkboxes in the domain controller are useless.
  2. the events of reconciliation that lie all in the NCE table
  
  I tried to find a pattern in the accounts of the table, but have not come to conclusions. Any ideas on how to cut this?
  
  Thank you.

  Hello

  I did this long time back, but you can try this one, but please take a backup of your database, as it's direct sql query. I do not recommend until his inevitable.

  delete of the BCRS where rce_key in (select rce_key from NCE where rce_status = "Missing required data");
  Remove rcd where rce_key in (select rce_key from NCE where rce_status = "Missing required data");
  remove from rch where rce_key in (select rce_key from NCE where rce_status = "Missing required data");
  Remove CPP where rce_key in (select rce_key from NCE where rce_status = "Missing required data");
  remove the MRC where rce_key in (select rce_key from NCE where rce_status = "Missing required data");
  Remove rcd where rce_key in (select rce_key from NCE where rce_status = "Missing required data");
  Remove CPR where rce_key in (select rce_key from NCE where rce_status = "Missing required data");
  Delete of the NCE where rce_status = 'required missing data. "

  You can change your rce_status.

  Concerning
  Nitesh

• AVT Guppy 033 B device is the same image twice on the < Session Out > event: Frame made

  Sometimes the event gets the same image twice, but with an increase, correct the image of the index (see photo index 125, 126).

  We use a type AVT Guppy 033 B firewire camera to measure the distance between plants. The camera fires all 40mm the breakpoint of the NI7344 of motion control output.

  We work with the latest Labview and Vision version 8.6.1 could the firewire driver cause this problem. We use the original driver

  Microsoft XP, SP3. Should install us the driver of the TRA instead, other suggestions?

  Thanks for any help.

  

  

  Syn66,

  Looks like your code without taking into account the fact that the Images are passed by reference. It seems that you still spend the same image GetImage and then put it in your queue. Each iteration you will be overwrite the content of the image of the singular and all the elements in the queue is pointing to the same data of the image.

  If you want to structure your code like this, you'll probably want to create an image of each iteration of the loop, call GetImage use it and then put it in the queue. When you treat it and get out of the queue, you can then destroy it. You can optimize the image allocate/free sentence (which may or may not be meaningful) with a strategy of ping-pong by having a separate queue images empty and then you delete the images of this queue empty, GetImage to use and place it in your existing queue of images to process. After the treatment, instead of simply releasing them you would put them back in the empty queue.

  Hope this helps,
  Eric

• Changes in Word, when I enter a character or letter, it deletes the next character

  original title: change in Word

  I was to edit a multiple page document.  So far, if I add or change a character, he just replaced what I typed.  All of a sudden, when I enter a character or letter, it deletes the next character.  I lose words or letters.  How to get back to editing without erasing it?

  Press ENTER on your keyboard.  See http://en.wikipedia.org/wiki/Insert_keyif you happen to have Word 2007 (or 2010) see http://help.lockergnome.com/office/Insert-key-work--ftopict1003194.html or http://www.technize.com/how-to-enable-insert-key-in-microsoft-word-2007-word-2010/

• Is it OK to delete the update number 2 after the new update has been entered IE number 6 of the same program?

  to delete the update number 2 after the new update has been entered IE number 6 of the same program

  original title: he is allowed to delete the previous updates of files

  Hi Carl,

  I suggest you go through this article to Java which can be useful.

  Why should I remove old versions of Java in my system?

  Removal of previous versions of the .net Framework is based on the applications that are running on the computer.

  For applications, if you have an application based on any .NET Framework on the computer, you cannot delete it since you have need to support the application runs correctly.

  .NET framework 3.5 SP1 includes .NET Framework 2.0 SP2 and 3.0 SP2. This means that .NET Framework 2.0 and 3.0 can not be deleted because they are the sine qua non of .NET Framework 3.5 SP1. If you have any application based on .NET Framework 3.5 SP1, please do not remove .NET 2.0 SP2, 3.0 SP2 and 3.5 SP1.

  I would also not to uninstall the security updates that are important for the security of your computer.

• Delete the files for registration error in Event Viewer

  Original title: Jorge

  Hi, can I just permanently delete error recording files? they came out after that I looked at Event Viewer?  Thank you

  That's what I have records of error application form Viewer event, security audit records, system error reecords custom log error records

  Hello

  Thanks for posting in the Microsoft Community Forums.

  Microsoft Windows operating systems include an observer of events that records instances of computer about security changes, of hardware and software. Even if this maintenance assistance program handles the details constantly, you must erase it occasionally because once the capacity of the event log is full, the event viewer to stop recording. After that you have reviewed the incidents, you can save or delete. The steps below will teach you how to clear the observer of events quickly, make room for fresher newspapers of the day.

  (a) select ' Control Panel ' in the start menu.

  (b) then select "performance and Maintenance"

  (c) select "Administrative Tools"

  (d) open "Event Viewer."
  (e) highlight the journal the list Microsoft Management Console .

  (f) in the toolbar menu, select 'Action' and "clear all events" .

  (g) select 'Yes' to save the event log.

  Please post back with the result. If the problem is still not resolved, we will be happy to help you further.

• beforeSave "unable to delete the target of an active script event" error

  Hello

  Can someone get to work, the extract below?

  I can't get the beforeSave event to place an image, I get the error message "cannot delete the target of an active script event.

  The same question was asked and not answered here beforeSave "unable to delete the target of an active script event" error with a snippet of applescript.

  Thank you

  Trevor

  #targetengine placeImage
  before = function (evt) {
      var doc, placeFile, newPage;
      doc = evt.target;
      if ( !(doc instanceof Document) ) return;
      placeFile = new File (File.openDialog());
      if (!placeFile) return;
      try {
        newPage = doc.pages.add();
        placedImage = newPage.place(placeFile)[0];
      } catch (e) {
        app.eventListeners.item("onBeforeSave").isValid && app.eventListeners.item("onBeforeSave").remove();
        alert(e); //Cannot delete the target of an active script event" error
      }
  }
  
  
  function registerEventListener() {
    app.eventListeners.item("onBeforeSave").isValid && app.eventListeners.item("onBeforeSave").remove();
    app.eventListeners.add( "beforeSave", before).name = "onBeforeSave";
  }
  
  registerEventListener();
  
  

  #targetengine placeImage
  before = function (evt) {
      var doc, placeFile, temp, tempDoc;
      doc = evt.target;
      if ( !(doc instanceof Document) ) return;
      placeFile = new File (File.openDialog());
      if (!placeFile) return;
      evt.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;
      try {
        tempDoc = app.documents.add(false);
        temp = tempDoc.spreads[0];
        placedImage = temp.place(placeFile)[0];
        temp.duplicate(LocationOptions.BEFORE, doc.spreads[0]);
        tempDoc.close(SaveOptions.NO);
      } catch (e) {
        app.eventListeners.item("onBeforeSave").isValid && app.eventListeners.item("onBeforeSave").remove();
        alert(e); //Cannot delete the target of an active script event" error
      }
  }
  
  function registerEventListener() {
    app.eventListeners.item("onBeforeSave").isValid && app.eventListeners.item("onBeforeSave").remove();
    app.eventListeners.add( "beforeSave", before).name = "onBeforeSave";
  }
  
  registerEventListener();
  

  Œuvres without raising an error.

• Use the Timer event or keyboard in the same frame

  Hello

  I am trying to create a model of proof-of-concept/work for an exercise of e-Learning, that I can build and then on. 16 words are presented randomly (no times) split into frames to 1000ms each. The user can react either by pressing/touch a button or not urgent/touch the button. If they do not press/touch the button the should forward an image after 1000ms randomly framework/Word depending on (Timer event). If they decide to touch / push button (mouse event) before the auto-advance (event Timer) 1000ms, it must move immediately to the next random chassis/Word and do not wait for the rest of the 1000ms.

  I can create a feature on the first image to move randomly, use a Timer event listener or the mouse event listener. But I can't understand how to use both. In addition, while the Timer event seems to work OK on the first image, iteration on executives, the mouse always event occurs, if selected by the user, other than the first image frames.

  (An alternative would be to use one area of text on a single image, the way random words, the array of 16 words.) But that would present a similar problem to change after 1000ms or if the button is press/touch, change immediately.)

  So far, with modest skills in AS3, I could not get my brain around using these events and on the frames.

  Any help would be appreciated.

  Kind regards
  

  Then mark this answer as being correct.

  This thread is far enough from the original version so, start a new thread if you have a different problem.

• Why the enter, ESC and delete the off key?

  Hi all

  Now that I have the update on my DataGrid and I can select a line using up and down arrows on the keyboard, then I want to confirm my line selection by pressing the Enter key.

  But, my interlocutor on the DataGrid control keydown does not see the entrance, escape and delete keys. Most of the other keys is seen. I can browse the list using up and down keys (and I can see my function in the keydown listener are called).

  It only happens when I check my IDE Flash application. In debug mode, these keys are taken into account.

  My DataGrid is not editable but selectable.

  Any idea?

  Thank you for all

  You are welocme.

  .

• How can I trap FRM-40102: Record must be entered or deleted the first error

  Whenever I click the box tool button insert record (green more) I get FRM-40102: Record must be entered or deleted the first error. How to catch the trap this error?
  
  IF errnum = 40102 THEN
  Clear_All;
  create_record;
  END IF;
  
  I want to put the above code. What trigger, I need to add this code. I have the multi block shape.

  Hi Chris,
  You can use the ON-ERROR trigger at the level of the form like that...

  IF ERROR_CODE=40102 THEN
   -- Do something here...
  ELSE
    MESSAGE(ERROR_TEXT);
    MESSAGE(ERROR_TEXT);
    RAISE FORM_TRIGGER_FAILURE;
  END IF;
  

  -Clément

• Cannot delete the created dynamically symbols.

  I have a dynamically created symbol, enter a div. parent not the scene.

  using the:

  var sym.createChildSymbol = water ("water", "water_pos", 0);

  sin of the var = sym.createChildSymbol ("fishing_boat", "fishing_boat_pos", 1);

  I need 4 scenes animated but only show one at a time. It has been runnng slowly if left running for a while (which is also strange), so I'll try to load than I need.

  The symbols are creating perfectly, but for some reason any that I can't remove them whan I finished with them.

  I can remove the other symbols that were not dynamically created in the project but cannot pin new instances of symbols and delete them.

  I use the API deleteSymbol().

  I tried the right answer here, but it's Delete my screen while leaving a white BG?

  They suggest:

  You use the symbol should be deleted in as parameter for the deleteSymbol() method, as follows:

  sym.deleteSymbol ("Peak1_1");

  http://forums.Adobe.com/message/5283417#5283417

  I'm fooled!

  What I'm missing!

  Thanks for any help or suggestion.

  Johnny
  

  I found the solution of timjamarillo more on this thread: http://forums.adobe.com/message/4848076

  I took me a while to find so I'll put it here in case someone else needs it!

  .....

  It's probably a question of importance. I recommend to put all the functional code on Stage.compositionReady event, then call these functions from anywhere where you need.

  Put this code on Stage.compositionReady:

  Store your symbol

  sym.mySymbol;

  sym.createParticle = function() {}

  Pull the symbol in the library, add to the scene

  sym.mySymbol = sym.createChildSymbol ("Food_Spanner", "Stage");

  }

  sym.removeParticle = function() {}

  delete the symbol

  sym.mySymbol.deleteSymbol ();

  }

  Place this code on frame 1:

  sym.getComposition () .getStage () .createParticle ();

  Put this code on frame 15:

  sym.getComposition () .getStage () .removeParticle ();

• After you export a photo library of backup, how to delete the photos in the photo library of the system

  Hi, I use the pictures 1.2

  Each year, I export my library on a backup drive and give it the name of the given year. My next task was to remove unwanted pictures (about 10 K photos) from that same year, then keep those 'important' for me (stuff of family, work and other landscapes and al. stuff: about 2 000 pictures.) I don't remember how I used to do with iPhotos, but it seemed obvious. Now, with Photos, I see only two choices: either watch the complete list of the photos, then click on those that I don't have anymore (I do not see me scroll 12 000 photos and videos) opening of the events at the time and the option click all photos to delete (and not just remove them from the event).

  Deleting events without opening it won't because I get a message telling me (for good or bad reasons) that the photos are always going to be there. But then, imagine that I could remove the same with content pictures, I have about 300 events to remove, and they can be deleted one at a time.

  So my question is (and I already put it as a feature request to apple, just in case) how I mass delete unwanted items and their photos, or better yet, how can we keep all the photos that I like (Favorites, for example, or photos with celebrities...) and delete the rest?

  My library contains more than 200 GB on my MacBook Pro 500 GB HDD. I can't let it grow to 150 GB each year. and I guess I'm not the only one with this problem. In addition, I travel a lot in many countries with bad Internet connections, so I won't use iCloud.

  Thank you!

  How are 'export' your photo of the backup library?  You create a copy of your current photo on the backup disk library or using "file > export" to export the photos? Just to be sure, that your photos are safe.

  My next task was to remove unwanted pictures (about 10 K photos) from that same year, then keep those 'important' for me (stuff of family, work and other landscapes and al. stuff: about 2 000 pictures.) I don't remember how I used to do with iPhotos, but it seemed obvious.

  You can quickly find the photos to delete by creating a smart album with the rule "the Photo is not favorite" and "Date is in the range...". »

  File > new Smart Album:

  

  You can add a rule "keyword is not 5 stars", if you have added the side star as well.

  Then, select a range of photos in this smart album and enter the ⌘⌫ (command + delete) key combination.

  This will completely clear photos of the library.

  You can use the same combination of keys to remove the photos from iPhoto event albums in the Album section.  If you simply enter the delete key, the photo will be deleted only from the album, but remain in the library.

• Subgroup of experts can pass events to the top-level event loop?

  I'm working on a VI that may have up to 1000 controls (Yes, she really need that much).  To reduce the size of the user interface and increase the modularity of code, I partitioned design into subgroups that are loaded in tabs.

  Subgroups are responsible for:

  "VI reference to open"--> "invokes the method: Run VI '--> ' invoke the method: Insert VI»

  (Sorry, I don't know how to incorporate images here, yet)

  The upper level has some of its own controls in addition to the case of the Sub-group of experts, and it will be built on the design of producer-consumer model.  The loop of consumer manages the interaction with the hardware (write-only).  Each sub-group of experts will also have its own event loop to manage coordination of the user interface within the Sub-group of experts and also a preprocessing of data that results from the activity of the user within the Sub-group of experts.

  Here's the problem: go in the subgroup of experts, how do I pass an event up to the top-level event loop so that the hardware access request can be entered into the queue of the consumer?

  At first it seems I could solve this problem in two ways:

  (1) rather than to use an Invoke node to insert the Sub-group of experts, is it possible to connect the frame of the Sub-group of experts against a VI that is instantiated in the block diagram?   If there is, I can simply use dataflow to bring jury secondary to the upper level events.   But for now, it seems there is no way to have a subgroup of experts except by using the Invoke node.

  2) there is another way, that we have found, but this is an ugly hack. The reference to the 'Open VI' VI using, I use ' call method: control value: Get.  Gives me the value of a control in the Sub-group of experts, but there is no case of signaling, so I have to resort to polling stations, which slows down the user interface and breaks the model "Event Loop".

  Y at - it of other ideas for how to get events from the Panel under treaty to the next level?

  (of course, this isn't * all * the events we manage.)  The Sub-group of experts will actually a pre-treatment and then send only the selected events to the highest level user-defined)

  Thank you and best regards,

  J.

  I have not used the secondary method before, so I can't save what I think with real experience.

  But,

  If the Subvi who is put in a secondary control on front panel for a queue reference, I think you'd be able to do the Invoke node to set the reference queue control before calling the functioning of the VI.

  The other idea would be do not to have a reference of queue control to pass.  But use named queues and leave the Subvi in high school to create its own queue reference based on the same name that was created in the main VI.  When it ends, it could destroy its unique queue reference and not to force a destroy all and reference to the queue in the main VI would still be a queue works valid waiting for an another sub - VI at the secondary level to generate his reference to the same queue and sends the data in.

• Cannot delete the email in the account Windows Live Mail POP HP 64 - bit of Windows 7 with all updates.

  Impossible to delete the email in windows live mail account POP Windows 7 64 HP with all updates.  Have a lot of emails that I can't remove from two different computers.  Just today I discovered when arrives the cannot delete.  Today, I deleted a bunch of emails and worked on a response email when my computer suddenly reobooted to install windows updates.  After reboot, email I sent was no longer there but I had deleted emails back and I am now getting error box "Windows Live Mail" "an unknown error occurred.  Impossible to delete, move, copy, view, etc..  Almost as if email has been deleted, but it is still listed as being there in the list of messages.  Have now almost two pages of emails in the list of messages that I can't get rid of.

  original title: cannot delete email

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says Show restore points more.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  I hope this helps. Good luck.

• My method gotoAndStop (4) briefly visits framework 4 and returns to the same frame. How can I solve this problem?

  On frame 3 of my program, I created a program that allows you to choose your name (as in a game) and go to a box OK (called okBox0) and press A, save the name as name and delete the txtArray that each outfit of the individual letters (ex: _ _ _ _ _ _ _-> A B C F E D _). I haven't posted the rest of the code, because it's too long. The problem is that my method gotoAndStop (4) visits frame 4 but don't just stand there (I wrote a tracer method to see if it was made of frame 4 frame 4 (trace ("enter frame" + currentFrame)).

  Here is the code I think that gives me the penalty.

  function confirmName(evt:KeyboardEvent):void

  {

  If (okBox0.currentFrame == 2 & & evt.keyCode == Keyboard.A) //the okBox0 2nd framework gives the appearance to be highlighted

  {

  for (var k: int = 0; k < 7; k ++) //there are 7 textfields created earlier in the program.

  {

  If (txtArray [k] .text! = "") name += (txtArray [k] .text); This creates the name by adding all the letters that are not empty.

  removeChild (txtArray [k]);

  }

  stage.removeEventListener (KeyboardEvent.KEY_DOWN, moveSelector2); the rest of these removeEventListeners remove eventListeners created previously.

  stage.removeEventListener (KeyboardEvent.KEY_DOWN, chooseLetter);

  stage.removeEventListener (KeyboardEvent.KEY_DOWN, removeLetter);

  stage.removeEventListener (KeyboardEvent.KEY_DOWN, confirmName);

  gotoAndStop (4);

  }

  }

  I found an answer semi.

  I created a Boolean value called VF4 (means visited framework 4) that evaluates to true if the frame 4 has been visited. I put:

  If (VF4) gotoAndStop (4);

  in the upper part of the frame 3. I put:

  VF4 = true;

  in box 4. She'll have to do for now, thanks kglad for your help.