Why the enter, ESC and delete the off key?

Similar Questions

• Key Fn of NB200 Windows 7 does not work do not with ESC and F1 to F8 keys

  I recently bought a Toshiba NB200-136 and everything worked well.

  Flash cards top/bottom of the screen to work with space, ESC and F1 to F8 keys, the rest of the function keys work without showing the cards. Lately, the cards ceased to show and I can't use the Fn + space, ESC, F1 - F8 keys (there simply no reaction), although the rest of the buttons works with the Fn and the LED lights constantly when you press the Fn.

  I have reset the flashcards, checked and changed their settings a few times and they work only if I choose 'Allow the mouse do the maps' option. Even while they do not appear when I press Fn and functions work only when I click one of the cards.

  The problem appeared after (although I don't know if immediately) situation:
  I clicked on start-> Shut down and closed the lid. When I opened the next morning, I saw an empty list of programs that do not stop (it happens quite often, but this is off the top). I clicked 'Cancel' or 'Closed Force' but it didn't work so I pressed the power button for 5 seconds to turn off the computer. I noticed the problem of the Fn after having turned it on and it does not disappear after reset.

  I think that the problem appeared before but disappeared after reboot, so I ignored it.

  I will be grateful for your help.

  All the time that you force Windows to stop instead of leave, he stopped normally (sometimes you must turn it off), you may have lost clusters of data that interfere with the correct operation of Windows. Then I suggest that you start and run scandisk and make sure that you check the box to solve the problems. The other box must not be marked if you suspect bad sectors on the hard disk and it takes a long time so I recommend you to check the box only to find and correct errors.

  Let us know if it worked and the problem is resolved.

  Good luck.

• EMERGENCY SITUATION! Please help me! Why the OFF button would not start me in the hp recovery partition?

  I bought a hp Pavilion dm4-2015dx for a little more than a week or two to Bestbuy.ca.

  When I tried to launch the recovery by pressing F11at the start this morning, the following is the display.

  Windows could not start. A recent hardware or software change might be the cause...

  file:\Boot\BCD

  Statue: 0cx0000225

  Info: an error occurred trying to read the boot configuration

  Note: I recently made a partition, I divided the C drives in A and B, I wonder if that has an effect on my computer?

  Help, please! Only, I bought the laptop for a little more than a week

  Greetings,

  If you insert the first disc in your DVD-rom and you start your computer, the screen HP press ESC until you get a menu. Select the start menu and select CD/DVD-ROM, then enter. When it tells you to press a key to boot from the CD, press a key any. This will load the recovery software. Select immediate assistance and a recovery of the system. This will install your computer as the day where you bought everything first.

  WARNING * you will lose all files and programs that you have installed and placed on your computer that you bought the device.

  Yes, this will allow you to use the F11 key again once the recovery complete. Typical HP for the device warranty is one year. We can find this information for you. If you look at your serial number label, it should give you a serial number and the identification code of the product. With this information, you should be able to trace accurate information by the auditor of warranty status if your product has a #ABA or something similar, don't forget that.

  To find your sticker:

  http://h10025.www1.HP.com/ewfrf/wc/findModel?cc=us & DLC = in & LC =

  The guarantee verification link HP is:

  http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us & DLC = in & LC = on & os = 4062 & Product = 3204464 & softwareitem = MP-74848-1 & sw_lang =

• Why change my desktop and delete my Vista files?

  Original title: Why Vista change my desktop and delete my files?  I have to do a system restore to get back everything.  How to stop the changes occur?

  These changes occur too often, and I don't know how to stop them.  A system restore works, but I'm the only person who knows enough to make one - don't know other people who use this computer on system restore.  What should I do to keep my current settings and files intact?
  Thank you.

  Hi Rhonda,

  1. What do you mean when you say that the desktop is changed and delete my files?

  2. what files are deleted?

  3. the question occurs in other accounts of users also?

  4. have you made a recent software or hardware changes to the system?

  Typically an installation of a program or a driver can cause an unexpected change to your computer or put Windows behaves in unpredictable ways. This can be corrected when you perform a system restore.

  Step 1:

  You can check if the problem occurs in safe mode.

  Start your computer in safe mode

  Step 2:

  If you are able to boot into safe mode without any problem, you can try to perform a clean boot and check if the problem occurs in normal mode.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Why the BACKSPACE key to navigate to the previous page, instead of just a rear back on what I'm typing?

  This happens all to often; I'm filling out a form online and I made a mistake and press the BACKSPACE key and then Firefox navigates back one page rather than just a return back on the text. Because of the endless amounts of frustration that I then have to re - fill in the form that I was trying to fill.
  I have disabled this feature in all: config, but is not a viable solution because it gets overwritten every time that happens an update of Firefox.

  This feature can only be got rid of completely, or have an option to turn off?

  You shouldn't lose pref settings when you update Firefox.
  In this case you have most likely a problem with your security software or other software of cleaning that restores the settings.

  You want to be sure that a pref change then you can use the user.js file to initialize this pref at each start by copying its line in the file prefs.js to it.

  • http://KB.mozillazine.org/user.js_file

• Why the sound keys on my keyboard don't always work?

  I use an Acer Aspire 5733Z-4445, and sometimes the volume control keys do not work. I don't think it's the Fn key is because the other buttons like the brightness of the screen still works. What's wrong?

  Hello

  Check if the keyboard device is enabled in the Device Manager.
  a. click Start, type Device Manager in the start search box, and click on it.
  b. click keyboard to expand the list of keyboard devices installed on the computer.
  c. determine if the keyboard is on or off.
   
  d. right-click on the name of the device keyboardand then click on turn on. If the problem persists, then follow step e.
  e. right click on the name of the device, select Properties, and then view the message in the device status field. The device status field contains either:
   
  A message that contains most troubleshooting for your specific device information.
  Or,
  A message indicating that the device is functioning properly.

  Let us know the State of the question, if the above aid.

  Thank you!

• Why the mouse keys does not work?

  I would use MouseKeys in windows to use my keyboard as a mouse, but I was not able to get the function runs.

  I am able to activate the MouseKeys without any problem, but by pressing the keys on the numeric keypad does not move the pointer of the mouse at all.

  I can see the mouse keys icon in the notification area of the taskbar of windows 7 and I am able to switch between the left and right mouse buttons using the / and - keys on the keyboard, but that's all I can do.

  Anyone have any ideas on what I can do?

  Thank you

  Jason

  Hi, thanks for your response.

  I found the solution to my problem. Keys mouse was working, but I didn't know it because my mouse speed setting is set to minimum. Although it seemed that nothing was happening when I was pressing the keys on the numeric keypad, the mouse began in fact to move, but only very slowly.

  I adjusted my settings of the mouse, and the mouse keys now work properly.

  Thanks again

  Jason

• Why the windows key does not display the start menu?

  When I press the Windows key + E it opens Windows Explorer as it should. However, pressing the button of Windows alone does not start; I have to click with the mouse on the Windows buttonrto bting start menu screen

  Hello

  -What is the number of brand and model of the computer?

  Flip your keyboard and shake gently. This will remove any buildup of debris which may prevent the keys work properly. You can also use compressed air to remove dust from hard to reach under the keys areas.

  Method 1: Check with another keyboard.

  Try a different keyboard on your computer. If it works well when you connect a different keyboard, the issue may be with the keyboard.

  Method 2: on the keyboard of the screen
  Check if the problem occurs while using the on-screen keyboard. It will help us to check if there is any problem with the keyboard.

  http://Windows.Microsoft.com/en-in/Windows7/type-without-using-the-keyboard-on-screen-keyboard

  Method 3: I suggest you to check if you are facing the same question in the new administrator account.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  For reference:

  Troubleshoot keyboard

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-keyboard-problems

  (Also applies to Windows 7)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Why the mega key Ad it is disabled with FF9?

  Why can't I access megaupload.com with FF9? He showed this "problem loading page"? I do not understand because when I use FF8, it accessible normally.

  Firefox 9.0 is a Beta version. This add-on probably didn't has not been updated yet and the developer only supports the full release of Firefox builds.

• Why the option key + function drag the mouse all of a sudden does not work for duplicate objects?

  I have no idea why it will not suddenly, but I can't duplicate objects by pressing Option and drag my mouse on the object. Always work in Illustrator.

  First, restart and see if it works again. If this is not the case, see replace your preferences

• Re: Different Windows 7 another pro product key then press the down key

  Hi all

  Why is this?
  Different product under Windows 7 pro key other then the button on the bottom of the laptop.

  I used 2 different tools to recover my product key Windows 7 Pro.
  I have reinstalled this once using a defined recovery DVDs. Using 2 or 3 discs, but I do not remember that I had to enter the key when I reinstalled.

  I used nirsoft ProduKey. Can someone there check pls?
  Mine is a 64-bit system.
  One of my friends bought a laptop with a windows system 7 at home, but the office went to black. I told her check the product key, if it is the same as the bottom of her dressing room, then maybe the seller or someone else has used its product key on another system and Microsoft has taken this key on a blacklist. I don't know, just a possibility.

  I tried to check mine, but it shows me a different key. Checked with 2 tools.

  Thank you

  + The message was edited: link has been removed - unauthorized +.

  Hello

  Laptop Toshiba computers are preinstalled with an image of Toshiba. This isn't a single Windows operating system but a pilot cotaning package, tools and additional software.
  Of my knowledge, the Toshiba preinstalled image is already activated by the factory.
  The same image is used for the entire series laptop and I think that's the reason why the product key of Windows 7 at the bottom of the device is different from the key used in the image.

• Windows 8 Beta - cannot verify the product key

  Hi all

  After you have installed Windows 8 beta last year on my laptop, I bought the upgrade to the full version of Windows 8 and received a product key by e-mail as part of the purchase or download.  Now, I'm trying to use the same disk of Windows 8 Beta to install the OS on my desktop.  After you enter the product key, I get a message saying "cannot verify the product key - check your installation media."

  Can someone explain why the beta key does not work and if I get a new key?

  Thank you

  No, you can't, but what you can do is, use the following link to download and create the installation media that you can use to upgrade other computers.

  Please note, if other computers are running versions of 32-bit or 64-bit, you will need to create a respective installation media corresponding to the architecture of the facilities running on these computers (32 or 64-bit):

  If you must reinstall Windows 8 or you want to install it on one partition and you do not have installation media, you can create it using the installer of Windows 8. To create a support, you must use a PC running Windows 8.1, Windows 8, or Windows 7, and it must have the same architecture (32 or 64-bit) than the PC you want to install Windows 8.1 on. You will also need your product key of Windows 8.

  You can usually find your product key in your online order information, in the confirmation email of your purchase, or on the DVD packaging. The product key will look something like this: XXXXX - XXXXX-XXXXX-XXXXX-XXXXX.

  Once you have your product key and you are on a PC running Windows 7, Windows 8 or 8.1 of Windows, follow these steps:

  1. Run the program installation of Windows 8 .

  2. When you are prompted to run or save the file, choose run

  3. When you are prompted to enter a product key, enter the 25-character product key, that you received when you purchased Windows 8.1.

  4. When you are prompted to install Windows 8.1, select install by creating media and then click Next.

  Select the type of media you want to use: either a Flash DRIVE or a DVD.

  To create a USB flash drive

  1. Click on a USB flash drive.

  2. Plug the USB key into a USB port on your PC.

  3. When you are prompted, select the USB key that you want to use, and then click Next.

     If you have files on the USB flash drive, it will remove them.

  To create a DVD

  1. Click on the ISO file, and then select the location where to save the ISO file.

  2. Insert a blank recordable DVD into your DVD drive.

  3. Burn the ISO of the DVD file using Windows disc Image burner, or another program DVD burning.

  Please note that you will have a unique individual license (product key) for each computer you want to upgrade.

  You can buy additional product keys to:

  http://www.Windows.com/buy

• Add TextField by pressing the return key content

  Hello

  I would like to know if there is, okay, there is certainly a way, to add TextField content to a list by pressing keyboards return button/key. So far, I use a button 'Add' but this feels kind of stupid to enter text and to confirm twice (key first, then return the Add button) to add it to the list.

  Thanks in advance

  Use the properties of your TextField. for example:

  // Default empty project template
  import bb.cascades 1.0
  
  // creates one page with a label
  Page {
      Container {
          layout: DockLayout {}
          TextField {
              id:myText
              input {
                  onSubmitted: {
                      myLabel.text = myText.text
                  }
              }
  
          }
          Label {
              id: myLabel
              text: qsTr("Hello World")
              textStyle.base: SystemDefaults.TextStyles.BigText
              verticalAlignment: VerticalAlignment.Center
              horizontalAlignment: HorizontalAlignment.Center
          }
      }
  

• control of the volume on the keyboard keys do not work with usb dac

  o/s ultimate win7, ms wired keyboard 600, usb dac.

  I finally got the volume bar work, he reacts to the keys flight + /, but the volume remains the same.

  the only way I can change the volume is with my mouse in the window of Mixer volume, which is very inconvenient.

  no idea why the flying keys do not affect usb taken?

  Thank you

  Hi Yogi46,

  ·        Have you installed the software supplied with the Microsoft keyboard keyboard?

  ·        Who is the manufacturer of the computer, and what is the model of the computer number?

  I suggest to access the link below and download the keyboard theIntelliType Pro 8.0 for Windows 7 software and install it and check it out it allows you to change the volume using the keyboard.

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=keyboard&name=anb-00001&OS=Win7_32&lang=en

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Direct path SQLLDR allows duplicates in the primary key

  I would use sqlldr path direct to charge millions of records in the table but direct way allows duplicates on the primary key constraints.
  
  inserts of duplicates
  sqlldr control deploy_ctl/deploy_ctl@dba01mdm = direct ctl_test.ctl = true
  primary key is enabled
  
  I do not understand the behavior that's why the primary key is always enabled--(logiquement il doit avoir désactivé que doublons insérés)
  
  Inserts no duplicates
  sqlldr control = ctl_test.ctl deploy_ctl/deploy_ctl@dba01mdm
  primary key is enabled
  
  Please can I know if there is any work around to use direct path with constraints of primary school in place.

  The only solution is to not use direct load, if your dataset contains records in duplicate, of the documentation:

  /*
  A record that violates a UNIQUE constraint is not rejected (the file is not available in the memory when the constraint violation is detected).
  */