Delete the "Uninstall" in Windows, without performing the automatic Windows Update. ?

Similar Questions

• How to block the automatic Flash updates?

  How to block the automatic Flash updates?  Blocking possible updates in the registry? If Yes, then how?

  These questions are in reference to a work environment where Flash updates will be deployed by SCCM.

  Please see the section 'Update' chapter 4 'Administration' in our administrator's guide - http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html

• How can I delete the history of updates to Vista?

  Please tell us how to remove the history of Vista Home Premium updates. There is no box "Delete" anywhere on the screen "updates to see the.

  Why would you want to delete the update history?

  That being said, delete C:\Windows\C:\Windows\SoftwareDistribution <=this> & a restart must take care of it. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• What happens if I delete the old security updates?

  What harm is there in the removal of the old security updates?

  Not a good idea.  Your computer would be vulnerable to security issues that these updates set, making it easier for hackers to take control of your computer, identity theft, etc. Boulder computer Maven
  Most Microsoft Valuable Professional

• How to uninstall a windows update

  Windows LIve Essentials update was installed today but it altered the option of emailing page/photos using WindowsLive Mail IE7. The update was not found on the list of INSTALLATION updates... so I can not DELETE IT?

  If I delete the entire Windows Live Essentials I can download the original version of the WLE... without the last update that is causing me problems. ?

  Is there a support direct Tech option for this problem?

  Thank you

  CORRECET RESPONSE IS:

  GO to RESTORE MY SYSTEM and select a RESTORE POINT right before

  the update has been newly installed.

  Apparently, a MS UPDATE creates a RESTORE POINT when it

  installs the update. By restoring my system to the point before

  the "update" of the installed software has been removed and my system

  no longer has the problems caused by the WLE update.

  This response was published in a different thread... but it works

• Get the error Code 'WindowsUpdate_8E5E03FB' 'WindowsUpdates_dt000' when you try to download recommended update using the automatic settings 'updates '.

  I just noticed today, pronouncing the 'permission' to Windows to download and install, it is recommended to update it tries to download the update, hit 11% downloaded and then shows the dialog window "update failed", asking me to "Try Again", etc. etc. I googled the error exactly as stated above, and it takes to me an article 'A' answer the Question which recommends a bunch of steps that I have not the first clue of what they mean, or what they will do. I used the option "Microsoft Fix It" after a search, in an attempt to reset the Windows Update settings, but I don't know if it's working or not, although clearly it did nothing to help in the installation of this download. By examining the log of the updates installed, I am able to receive and install other updates, however, it is with a update I see several attempts in the last days to install, and each of them ended in failure.

  When we look at the site of Question answer, other than to check to ensure the update is, indeed, the Automatic value, that it is in accordance with the instructions given that's where I get lost. The following suggestion is something to do with the "C:\windows\system32\catroot" folder, I've never even heard of, and am more than a little reluctant to go messing around with this stuff. Can any that illuminate what he done, or point me in a direction to a response that is written in 'English' for those of us without much experience of computer programming? Live is support available for all what is the cause? Any suggestions much appreciated!

  See you soon!

  Ken, "Medic95."

  See if KB970430 will install after you uninstall IOBit Security 360 & reboot. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Media Player 12 is uninstalled by Windows Update?

  I am setting up a new computer running Windows 7 Edition Home Premium.  I went to the Windows Update site and concluded there are 37 updates available for download.  While Windows Update is running, the Media Player application was completely uninstalled with the shortcut on the desktop.  When I search for programs and files for the 'media', only the Media Center is located.  That's happened?  Can someone provide a link I can use to download and reinstall Media Player 12?

  Hello Mutt-man,

  Do you have update installed?

  You can check the updates installed in the history of the update.
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Windows media player may have been disabled. I suggest you try the steps and check them off below.

  1. close all programs.
  2. click on the Start button and then click Control Panel.
  3. under programs, click on uninstall a program.
  4. in the pane tasks, click on turn Windows features on or off.
  5. in the windows features list, click the plus sign next to multimedia functions.
  6. under multimedia functions clear the check box next to Windows Media Player.
  7. you receive a warning message in a pop-up window. Click Yes.
  8. now restart the computer and then go to Windows features turn on or off features. Place a check for Windows Media Player. You receive a warning message in a pop-up window. Click Yes.
  9. restart your computer.

  For more information, visit the links below:
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/what-happens-if-i-turn-off-media-features
  http://Windows.Microsoft.com/en-us/Windows7/what-happens-if-I-turn-off-Windows-Media-Player
   
  Hope this information is useful.
   
  Umesh P - Microsoft Support

• Quicken uninstalled after Windows Update

  After running Windows Update and install the updates, I discovered that Quicken software I had installed and used on my PC has been uninstalled.

  My OS is Windows Vista Premium
  After installing updates with Windows Update I couldn't see Quicken to control panel > programs
  The Quicken desktop icon disappeared
  Quicken has been removed from the start menu
  My Quicken data and some (but not all) of the program (x 86) files \Quicken files were still intact

  I installed 15 updated 11/1 and 17 updates 31/10. Many have been associated with MS Office, but a few were related to Windows Vista.

  Is this behavior (Programs uninstall) a bug in Windows Update?

  I would like to avoid that from happening. Any suggestions on how to prevent?

  Hi sshostek,

  Welcome to the Microsoft Answers community.

  This behavior is not a bug in Windows Update.

  Download Quicken manually and install it.

  To avoid this kind of behavior try to install the updates in clean boot mode.

  Follow the steps to enter boot mode:

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the Load Startup items check box.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. try to update your computer now.

  http://support.microsoft.com/kb/331796 . In addition, refer to the section on how to restore your computer to a Normal startup mode

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Delete the automatic backup files in Windows Vista Home Edition!

  Hello

  I bought a new HP Pavilion pc six months back... I have the disk hard of 320 GB (hitachi)... what I have copy on my hard drive, everything becomes backup without my knowledge...
  my space on the hard disk is dripping... for example: I have a lot of movies on my hard drive for about 50 GB, but I lost about 100 GB that means backup took place...
  now I want to delete these backup files to free up my disc drive... pls help... I don't know where the backup files are get stored... pls help...
  regarding...
  Karthikeyan devalla.

  Karthikeyan Devalla,
  Here are the instructions to remove some of the restore points using disk cleanup.  Your system is configured to record everything automatically on your computer at periodic points so if you need to restore your system files will be there.  But sometimes, you get more restore points that you want or need and he can eat a lot of disk space.  Here's how to control this.

  You can use Disk Cleanup to remove points of restoration and the free space on the hard disk on your computer.

  Disk removes the cleanup all but the last restore point on your computer. In some editions of Windows Vista, restore points can include previous versions of files. Previous versions are also deleted.
   
  1. open Disk Cleanup by clicking the Start button, tap all programs, accessories, click System Tools, and then click Disk Cleanup.
   
  2. in the Disk Cleanup Options dialog box, click files from all users on this computer.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  3. If prompted, select the drive you want to clean, and then click OK.
   
  4. click the other Options tab.
   
  5. under System Restore and shadow copies, click Clean up, and then, in the confirmation dialog box, click on delete.
   
  6. If you want to continue using disk cleanup for other drives on your computer, click the Disk Cleanup tab. To quit Disk Cleanup, click Cancel.
   
  Let us know if this was helpful, or if you need more information.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WiFi connection on c4580 fails after the automatic vista update windows.

  Hello

  There is a month my c4580 perfectly work on WiFi stoped working

  the reson seem to be updated auto matic windows, if I do a system restore the functions of the printer again, but a few days later, the connection went after an auto matic update

  to remedy this, I tried the following

  Following the recommendations of HP

  removed the Hp software and then try to install the drivers again after the download from their website form HP

  tried to install all updates firmware of HP

  tried to install without Firewall (bullguard)

  installed the latest firmware on my Linksys wifi router

  But still no luck

  the printer works perfectly on USB, but if I try to put it on wifi with the installation software stops

  It goes well until after I give my network key, and then it opens the network and communicates for a wile

  the last audit it does is trieng to connect to an IP address, then it stops telling me to fix the connection with the printer

  and the hp software is not responding so I have to restart my computer...

  I have no idea of what I can try again

  Help!

  Thank you

  Niels

  If you have the original CD, it get a L3 uninstall program and run that.  It will remove completely from your software.

  Reinstall the software from hp.com.

• I want to DELETE the plugin Google Update 1.3.21.153. Isnsn can't then delete all button!

  I use Firefox 19.0.After install the Google earth plugin, I have noticed that she also installed Google update plugin.
  So after uninstalling the plugin Google earth, I expected to uninstall Google update plugin too.
  But it didn't happen, and it is not any button Delete button.only enable /disable.
  It is unacceptable... major security risk.

  the plugin file named npGoogleUpdate3.dll is usually located in C:\Users\ < username > \AppData\Local\Google\Update\ < versionnumber >. You can remove it manually to get out of the list of plugins installed in firefox.

  Please address your complaint about these ubiquitous tactics to google. I remember the google update is also quietly registered as program Autostart as a scheduled task in Task Scheduler when you install any software of google...

• Cannot delete the automatically created Thumbs.db

  Original title: Thumbs.db

  Dear Sir/Madam

  Last week in my windows mobile 8 began creating Thumbs.db files. I can't delete these files as I have used options falder to Horde or do not show them but it still the same. I used disk cleanup, but still I get no results of these options. Please someone give me a solution for this problem.

  Thank you

  Edith

  See also http://www.nextofwindows.com/what-is-thumbs-db-files-and-how-to-disable-and-remove-them/

• Error code 646 when installing the automatic/important updates for Windows Vista (with Service Pack 2)

  Recently, I received 646 error code when you try to install the important/automatic updates to Windows Vista. What patches are there for this issue? What risks are there to do not overcome this problem?

  rivercitylady,
  Usually with the code 646 error, if you download the update and install it manually that will fix the problem.
  Go to the Microsoft Download Center and search for the number of the update has failed.  Download on your PC, then run it from there. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible to UN-delete the AAMEE packages updates?

  Hello

  After creating a Creative Suite CS5.5/6 package with JEAN (updates removed in the options), is possible to UN-delete updates once the package is deployed on the machines by editing a file .plist or similar (Mac in this case)?

  Thank you very much!

  Hello

  Yes it is possible. I don't know why you created packages with updates off, I guess it is suitable at the time, is the reason why I raise this question. With the help of the Enterprise IT tool RUM (Remote Update Manager) you can continue to keep the updates turned off so the customer is not manually try to bring back but rather does that when you send a command to the customers. The order will be issued to clients through a part like SCCM, Casper, Alteris 3rd deployment tool. In this way, they are installed as administrator and only on your designated point. It might not be attractive, but I wanted to make you aware of it. The enterprise deployment guide will give you more information about the required overide file to change the update options and RUM are in Adobe Labs http://labs-staging.macromedia.com/technologies/aameetools/

  See you soon

  Karl

• my pc deleted after that recent windows update (September 8, 2011)

  Im running a pc using windows xp pro (if I'm not wrong) and this is my work pc so I really need your urgent assistance.

  My problem is that yesterday after completing my work I left it open and when I tried to close it later that evening, I saw there is an automatic update waiting to be installed. So as usual, I have chosen to stop after update install & let it do its work. The next day, when I turn on the pc all seems ok, but after the window logo download page I have to wait for about 1/2 hour before the appearance of my newspaper in the console. After entering my password the console disappear and nothing on the screen. The only thing that's on the screen is my wallpaper. There is no taskbar, no start menu, no desktop items, nothing. I can access the Task Manager by pressing ctrl + alt + del, but same thing, it took me like ages before it appears, and I realized that there is no explorer.exe running. When I tried to run explorer.exe this message "Windows cannot access the specified device, path or file. May not be the appropriate permissions for access you to them.

  I tried rto run chkdsk via the cmd prompt and it detected there is a problem with the file system and ask me to run chkdsk /f. But I can only perform after a reboot, as it is said there are program using the volume. Yet once it would take me ages to wait for reboot start (I did it using Task Manager) at startup windows run the chkdsk command it t wen smoothly as there is no problem, but still the same problem happen where I have to wait an hour before the appearance of the console connection and after connection nothing is there.

  I suspect it might occur due to the new update that microsoft will invite me to install. I don't know what update, now I just ask to install before shutting down. I don't know if it's a virus or something, but currently I am using trend micro internet security titanium & ad-aware and on my final analysis there is nothing major execpt for some cookies. Can someone guide me if I could go back to my pc or uninstall the updated windows install for me? If I am not mistaken my pc ever point backup restore & never all together. I can't afford to re - format or reinstall windows because all my file work & work related email (outlook) are in the pc.

  Help, please!

  Hey James,.

  Thanks for the suggestion earlier, but none of these work for me. Ultimately I have back to the top of my old hdd to plunge into another pc, backup all data and reformat the entire hard drive.
  Anyway thanks for the help & appreciate your response.

• How to activate the automatic driver updates?

  Original title: update the drivers for hardware devices

  When install automatic updates, I get a message that 'Driver updates turned off' How do I turn on?

  Hello

   
  What is the operating system installed on the computer? Click the link below for help on this.
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running
   
  Enable/disable driver updated invite, it is essential to know what material make the device with the message driver.
   
  To receive updates on autopilot (for Windows 7), include these links:

   

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

   

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Updated a hardware driver that is not working properly

  For vista: http://windows.microsoft.com/en-US/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly