Delete value local variabel in table

Hello

Need help

I want to delete values in a table.

I have no possibility to do something whith table (its in a run and canoe sequense be accesed)

I don't have that a local variable Kael'thas gives me the values in the table in this table.

How can I clear the createdby the local variable values in the table indicator (Delete Array values)?

You must connect the table all over the false case, else it will reset to an empty array whenever the case of false runs.

Tags: NI Software

Similar Questions

  • Calculate the maximum value of the sub-table when creating using a structure of case and records the shift

    I have two 1 d arrays that contain cyclical information (a bit like a sine wave).  One that contains information about the position in degrees and another that contains the couple.  I would like to calculate the value of maximum torque whenever the station is within a certain range (for example, 30 to 80 degrees).  The beaches are repeated - that is why it is cyclical.   I use the function "in the range", a structure of the case and the shift records to build a new table with the values that are included in the beach I said - that was easy part (see attached VI).  I'm struggling with a way to calculate a maximum value for each sub-table formed when the values are 'in range '.   Your help is very appreciated.

    vt92 solution worked!  I agree that there should be a simpler solution, but your to works fine.  Thank you very much.

  • Unable to delete the local printer on my system port

    Hello!

    I wanted to use printer my colleague (HP Laserjet P2015d), which is not a LAN port. But our computers are connected to a local network. That's why I created a local port on my system to access this printer. I have been using this printer for the last 15-20 days. I have Windows 7 Professional 64 bit running on my system, while my colleague has Windows XP 32-bit.
    I don't know what happened, but since yesterday, I am not able to print documents using this printer. After that I have give the document to print, check the status and it says "Error-printing" in the icon of the printer. Then, I removed the printer from Control Panel and added he returned with the same existing local port. It worked once, but the problem came back again.
    I thought the local port itself the deletion and addition of it.
    Then I tried to delete the local port by selecting this printer-printer server properties >->-> port of remove the Ports tab... But the local channel under question is not deleted. It throws a message "the requested resource is currently in use".
    Then I repeated the above procedure after stopping the service from the coil and it restarts again. But it did not work.
    So, I changed the printer driver, but the problem is not yet solved. Finally, I asked my colleague to check if the printer works by giving an impression of its system. It worked this way. I asked him then to disable sharing the printer and turn it back on. Yet, the problem was not resolved.
    I ask you to give me advice on how to solve this problem.

    Click Start

    Control Panel

    Devices and printers

    Right-click on your printer, on the left, click printer properties.

    Click on the ports

    TOU can deselect printer ports there.

    Rick

  • Show values of hash on Table

    Hi all

    I have a HashMap in my grain. I want to display the values of the hash table in a table (UI).

    I couldn't get the key and the value of the hash table.

    hashmap.png

    moduleNameVersion - is the name of my HashMap with the bean.

    The #{row.key} #{row} is not to pick up the key and the value. It is just set to null.

    Please inform me of what I would give in the value column for the key and the value of the hash table.

    Reference would be useful.

    Thank you very much

    Kind regards

    Jean-Felix.

    Hello

    You do it like this:

    -page-

    -Bean-

    Private map mapTable;

    Private Object [] keyboard macros.

    public map getMapTable() {}

    mapTable = new HashMap ();

    mapTable.put ("1", "val1");

    mapTable.put ("2", "val2");

    mapTable.put ("3", "val3");

    MapTable return;

    }

    public Object [] getMapKeys() {}

    Return getMapTable () .keySet () .toArray ();

    }

    Kind regards

    Ruben

  • How to fill the value in the nested table by using the object type


    Hi gurus

    I created an object type and able to fill the values in it, now I want to create a nested table type of this object and fill it but looks like I'm doing something wrong, see my code below.

    Code example

    CREATE or REPLACE TYPE countries_o
    AS
    OBJECT
    (
    COUNTRY_ID TANK (2 BYTES),
    COUNTRY_NAME VARCHAR2 (40 BYTE),
    REGION_ID NUMBER);
    /

    create or replace type countries_t is table of the countries_o;

    /

    CREATE OR REPLACE

    ABC of the PROCEDURE

    IS

    v_print countries_t; -: = arr_countries_t('01','Aus',1);

    BEGIN

    v_print: = countries_t('01','A',11);

    DBMS_OUTPUT. Put_line (v_print. COUNTRY_ID | v_print. COUNTRY_NAME | v_print. REGION_ID);

    END;

    /

    Error

    • Error (6.3): PL/SQL: statement ignored
    • Error (6,12): PLS-00306: wrong number or types of arguments in the call to 'COUNTRIES_T '.
    • Error (7.3): PL/SQL: statement ignored
    • Error (7.32): PLS-00302: component 'COUNTRY_ID' must be declared

    Thanks in advance

    Concerning

    Muzz

    Hi user,

    Here is another method that you can try-

    CREATE OR REPLACE

    ABC of the PROCEDURE

    IS

    v_print countries_t: = countries_t (countries_o('01','A',11));

    BEGIN

    DBMS_OUTPUT. Put_line (v_print (1).) COUNTRY_ID | v_print (1). COUNTRY_NAME | v_print (1). REGION_ID); -you're accessinf the first element of the nested table, which in turn points to the object.

    END;

    In the sections of the declaration you have assigned values to the nested table.

    Kind regards
    Maxou

  • Can I delete the local data store on esx 3.5?

    I have a client with vmware ESX 3.5 no esxi

    They have a local data store but it is formatted with a block size of 1 MB, so I can put only a 256 GB VM out there and I need to put a test VM with a larger size.

    I know that in ESXi 4 you can simply delete the local data store and create a new, but I'm not familiar with ESX 3.5, are there hidden files on the data store that the server uses?  If I search for the store there's nothing in there.

    Thank you

    Mike

    Hi Mike,.

    You can simply reformat your data store. Take a look at the following article:

    Of course, you must back up and delete any data you have on this data store before the format operation.

    Good luck!

    Concerning

    Franck

  • How to assign values to the nested table and passes as a parameter for the procedure?

    How to assign values to the nested table and passes as a parameter for the procedure?

    Here are the object and its type

    create or replace type test_object1 as an object
    (
    val1 varchar2 (50).
    val2 varchar2 (50).
    VARCHAR2 (50) val3
    );


    create or replace type test_type1 is table of the test_object1;


    create or replace type test_object2 as an object
    (
    val1 varchar2 (50).
    val2 varchar2 (50).
    VARCHAR2 (50) val3
    );


    create or replace type test_type2 is table of the test_object2;


    GRANT ALL ON test_object1 to PUBLIC;


    GRANT ALL ON test_type1 to PUBLIC;


    GRANT ALL ON test_object2 to PUBLIC;


    GRANT ALL ON test_type2 to PUBLIC;

    Here is the table object type:

    create the table test_object_tpe
    (
    sl_num NUMBER,
    Description VARCHAR2 (100),
    main_val1 test_type1,
    main_val2 test_type2
    )


    NESTED TABLE main_val1 STORE AS tot1
    NESTED TABLE main_val2 STORE AS earlier2;


    -----------------------------------------------------------------------------------------------------------

    Here is the procedure that inserts values into the nested table:

    PROCEDURE INSERT_TEST_DATA (sl_num in NUMBER,
    Description in VARCHAR2,
    p_main_val1 IN test_type1,
    p_main_val2 IN test_type2
    )
    IS
    BEGIN

    FOR rec in p_main_val1.first... p_main_val1. Last
    LOOP

    INSERT INTO xxdl.test_object_tpe
    (
    sl_num,
    Description,
    main_val1,
    main_val2
    )
    VALUES
    (
    sl_num
    description
    test_type1 (test_object1)
    p_main_val1 .val1 (CRE),
    p_main_val1 .val2 (CRE),
    p_main_val1 .val3 (rec)
    )
    )
    test_type2 (test_object2 (p_main_val2 .val1 (CRE),
    p_main_val2 .val2 (CRE),
    p_main_val2 .val3 (rec)
    )
    )

    );

    END LOOP;

    commit;

    END INSERT_TEST_DATA;

    -------------------------------------------------------------------------------------------

    Here are the block anonymoys what values attributed to the object type and pass values in the procedure:

    Set serveroutput on;

    declare

    p_sl_num NUMBER: = 1001;
    p_description VARCHAR2 (50): = 'Test Val1;

    inval1 test_type1: = test_type1();
    inval2 test_type2: = test_type2();

    Start


    inval1 (1) .val1: = "testx1";
    inval1 (1) .val2: = "testx2";
    inval1 (1) .val3: = "testx3";

    inval2 (1) .val1: = "testy1";
    inval2 (1) .val2: = "testy2";
    inval2 (1) .val3: = "testy3";

    CSI_PKG. INSERT_TEST_DATA (sl_num = > p_sl_num,)
    Description = > p_description,
    p_main_val1 = > inval1,
    p_main_val2 = > inval2
    );

    end;
    /
    Someone can correct me.

    Thank you
    Lavan

    Thanks for posting the DOF and the sample code but whenever you post provide your Oracle version 4-digit (result of SELECT * FROM V$ VERSION).
    >
    How to assign values to the nested table and passes as a parameter for the procedure?
    >
    Well you do almost everything bad that could be hurt.

    Here is the code that works to insert data into your table (the procedure is not even necessary).

    declare
p_sl_num NUMBER := 1001;
p_description VARCHAR2(50) := 'Testing Val1';
inval1 test_type1 := test_type1();
inval2 test_type2 := test_type2();
begin
inval1.extend();
inval1(1) := test_object1('testx1', 'testx2', 'testx3');
inval2.extend();
inval2(1) := test_object2('testy1', 'testy2', 'testy3');

INSERT INTO test_object_tpe
(
sl_num,
description,
main_val1,
main_val2
)
VALUES
(p_sl_num, p_description, inval1, inval2);
commit;
end;
/

    See example 5-15 making reference to an element of nested Table Chapter 5 using PL/SQL collections and records in the PL/SQL doc
    http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28370/Collections.htm#CJABEBEA

    1. you don't even have the procedure because it is a simple INSERTION in the table you can do directly (see my above code)

    inval1(1).val1 := 'testx1';

    Since you have not yet created all the elements, there is no element 1 "inval1". You need EXTEND the collection to add an element

    inval1.extend();

    And then, there is an empty element, but "inval1" is a container for objects of type 'test_object1' not for scalars as "val1", "val2", and "val3".
    If you can not do

    inval1(1).val1 := 'testx1';

    You must create an instance of 'test_object1 '.

    inval1(1) := test_object1('testx1', 'testx2', 'testx3');

    And so on for the other collection

    You don't need the procedure (as my code example shows), but once you fill in the variables correctly it will work.

  • Assign a value to a populated table cell [in BULK]

    Hi all
    I have a problem by assigning a value to a populated table to COLLECT LOOSE .
    I can reproduce the problem with this
    CREATE TABLE TEST_TABLE (
value1 NUMBER,
value2 NUMBER
);

INSERT INTO test_table VALUES(1,1);
INSERT INTO test_table VALUES(1,1);
INSERT INTO test_table VALUES(1,1);
INSERT INTO test_table VALUES(1,1);
INSERT INTO test_table VALUES(1,1);
INSERT INTO test_table VALUES(1,1);
INSERT INTO test_table VALUES(1,1);
INSERT INTO test_table VALUES(1,1);
INSERT INTO test_table VALUES(1,1);
INSERT INTO test_table VALUES(1,1);
    And it's the anonymous PL/SQL block that gives me problems:
    DECLARE
  SUBTYPE t_rec IS TEST_TABLE%ROWTYPE;
TYPE records_table IS TABLE OF t_rec;
  elist RECORDS_TABLE;
  CURSOR table_cursor IS SELECT * FROM TEST_TABLE WHERE rownum <= 20;
BEGIN
  OPEN table_cursor;
  FETCH table_cursor BULK COLLECT INTO elist;
    FOR j IN 1..elist.COUNT
    LOOP
      elist(j)(1) := elist(j)(1) +1;
    END LOOP;
  CLOSE table_cursor;
END;
    The error is
    ORA-06550: line 13, column 7:
PLS-00308: this construct is not allowed as the origin of an assignment
ORA-06550: line 13, column 7:
PL/SQL: Statement ignored
06550. 00000 -  "line %s, column %s:\n%s"
*Cause:    Usually a PL/SQL compilation error.
*Action:
    So they do not compile because of this line of code:
    enclose (j) (1): = enclose (j) (1) + 1;

    Why it does not work?

    If I try to do, works perfectly:
    DECLARE
TYPE v_num_table
IS
  TABLE OF NUMBER;
TYPE v_2_num_table
IS
  TABLE OF v_num_table;
  v_nums V_2_NUM_TABLE := V_2_NUM_TABLE();
BEGIN
  v_nums.EXTEND;
  v_nums(1) := v_num_table();
  v_nums(1).EXTEND;
  v_nums(1)(1) := 1;
  v_nums(1)(1) := v_nums(1)(1) +1;
  dbms_output.put_line(v_nums(1)(1) );
END;
    Published by: user10396517 on 2.35 2-mar-2012

    Variable "enclose" is an archival collection, so access you an individual field of an element of the given collection by specifying the domain name, not its position:

    DECLARE
  SUBTYPE t_rec IS TEST_TABLE%ROWTYPE;
  TYPE records_table IS TABLE OF t_rec;
  elist RECORDS_TABLE;
  CURSOR table_cursor IS SELECT * FROM TEST_TABLE WHERE rownum <= 20;
BEGIN
  OPEN table_cursor;
  FETCH table_cursor BULK COLLECT INTO elist;
    FOR j IN 1..elist.COUNT
    LOOP
      elist(j).value1 := elist(j).value1 + 1;
    END LOOP;
  CLOSE table_cursor;
END;

    Your second example is different because you are dealing with a collection of collections.

  • Deletion of rows in a table while the filter condition is in another table

    Hi all

    I am facing a problem of deletion of a row in a table where the condition is in the other table. To ealaborate the scenario further Let's say I have two tables T1 (the transactions table) and T2 (Master Table). I want to delete a record in the table T1 by checking conditions lies in table T2.
    I tried with the query below, but this request deletion of records in the table two.

    DELETE FROM (SELECT * high INNER JOIN T2 on T1 page TP)
    THE top. TID = TP. TID
    WHERE at the top. DEAL_SITE_ID = inputparameter1
    AND (TP. SEGMENT <>inputparameter2 OR tp.segment is not null));

    Here the record is deleted in the two tables, but I don't want to delete the data in my table master i.e table T2.

    Any help would be much appreciated. Thanks in advance.

    Kind regards
    Delphine 
    SQL> select *
  2   from the_table;

X          Y
---------- ----------
AA         a
BB         a
CC         a
AA         b
DD         b

SQL> select *
  2   from the_table_2;

X          Y
---------- ----------
AA         a
BB         a
CC         a

SQL>  delete from
  2  (
  3  select *
  4  from the_table  t1 inner join the_table_2 t2
  5  on  t1.x = t2.x
  6  and t1.y = t2.y);

3 rows deleted.

SQL> select *
  2   from the_table;

X          Y
---------- ----------
AA         b
DD         b

SQL> select *
  2   from the_table_2;

X          Y
---------- ----------
AA         a
BB         a
CC         a

  • Get unique values from an xml table

    I have an xml file and I would like to create a table of all the unique values of one of its nodes.

    The xml file is called pntxml and the node is pntxml.row.Category where the category is where I would like to create a table of all the unique values.

    I was working through this and would first create an array of all the values in the category in iterating through the xml and pushing these values in a separate table.  When I try to push each entry in a table I get an error or

    TypeError: Error #1009: cannot access a property or method of a null object reference.
    at NAPA_fla::MainTimeline/sortXml()

    var catArray:Array;

function sortXml(event:Event):void{
for (var i:int = 0; i< pntxml.row.length(); i++){
     tmpCat=pntxml.row[i].Category;
     trace(tmpCat);
        catArray.push(tmpCat);           
}
}

    Anyone has a suggestion for the best way to get at this problem?

    Thanks in advance,

    Josh

    Your catArray does not exist because you said only she, you have not created an instance of this...

    var catArray:Array = new Array();

  • Referencing of the values of the dynamic tables

    Hi you all!

    I am building a form for one of my clients. It is divided into three languages depending on who fills out the form.

    You can start of Poland then switch to English and watch that all filled. Someone else can do the same thing

    but starts of English and following pages in Polish. There is also a German part in it.

    Previously, it was a static form for each value had been spread between parts of a document

    by linking it as global.

    Now I have a dynamic PDF with dynamic arrays. I have to generate rows in the same table

    in each languages part and a person who can go to any language (part of the document).

    I enclose a small example of two subforms. Each represents the different language version. Buttons

    each of them can add rows in both tables at the same time.

    I tried to write formulas for cells to Exchange data between. In this example, this works. When I import these

    subforms in my real paper, that it stops working.

    How can I bind values between cells of these tables to use both ways, from any of them?

    Any part must copy a value of corresponding cells, both ways.

    http://strony.Aster.pl/Wystawa/www/tables_example.PDF

    Kind regards

    Sylwester Zacheja

    Hello

    There is here an example that might be of help to you: https://acrobat.com/#d=hkeDKn6SRo1FAvFUoY6Smw

    If you look at the script in the second print button, you will see how she fills in the values of the visible table to a hidden table.

    Also this example can help: https://acrobat.com/#d=z9JRAb-7bKkdBwRHM4EHGw

    Niall

  • Impossible to delete the record from the table using the form

    I have a stored procedure (function, actually) that allows an administrator to manually delete a record in a table.

    When I call my form there will be no effect. The record remains in the table.

    In both cases, I connect to the database to the same user.

    I am able to call a test function in the database which returns a field in the record, so I think I can at least communicate with and retrieve results from the database using a stored function. As soon as I approach him "select" "delete from", no luck.

    If I try to run the SQL in my form with a statement of FORMS_DDL, it seems to run smoothly when I not in the code in the debugger, but it had no effect. FORMS_SUCCESS reports TRUE if DBMS_ERROR_TEXT has the following: ORA-01403: no data found. I don't know how the DBMS_ERROR_TEXT is that FORMS_SUCCESS is not set to FALSE.

    Any ideas as to why I am unable to remove using my form but can when you call the function registered directly/manually?

    Using Oracle Forms & DB 10.0.2.0.1.

    Patrick,

    After each Insert / Update / Delete statement, you have to COMMIT . Then only it will be in select statements.

    Kind regards

    Manu.

  • Delete the row in the Table by using the report link column

    Hello

    I a report advocating the rows in a table - I would like to for users to be able to delete rows in the table by clicking on the link in the column "ID". I thought about trying to call a process by using a javascript URL (as mentioned in this thread - Re: how to call PL/SQL process when you press link column ) but I don't know how to write the process so that he knows what 'ID' to remove from the table.

    Any ideas would be greatly appreciated.

    Forrest

    Forrest:

    Follow these steps

    Create an item hidden on the page P_ID named who said
    In the column link definition set the goal URL as the URL as
    JavaScript:doDelete(#ID#);
    Add this JS ito header HTML of the page

    Create a process page ' on submit ' with the code to delete the record from the table. Subordinate this process by using a "pl/sql expression" type of condtion. Will be the expression of pl/sql

    :request='DELETE';

    Treat code

    delete from  where pk_column=:p_id; //adjust as needed 
    Add a branch that branches off to the page
    CITY
  •  
		     
    How to make a value in a temporary table, the match against another table...
     
			 Hi all.
    

    Please is - can someone provide some guidance on how to...
    

    1. take a value from a temporary table, the match against another table that contains the first values 'equivalent' value.
    2. take this exchange value, call something (using the slider or the variable?) so I can add to my API to load it into ORACLE...
    

    Apology of this sounds confusing, I hope you know everything what I want to do...
    

    Manythanks...
    

    Steven			 
    and call the API
    

    declare
   v number;
begin
   SELECT oracle_loc_code
      into v
   FROM SU_IEXP_LOCATIONS
      , SU_TEMPLOYEE_DETAILS
   WHERE chris_loc_code =location_id
   ;
   Hr_Assignment_Api.update_emp_asg_criteria (v);
end;

    		   
  •  
		     
    LOV in richeTableau resets the value after the deletion of rows from the table
     
			 
    Hello. I'm on 11g R2
    I have a table with columns in the box and a button in the toolbar that removes the lines checked
    I have build it based on the following article in her string code
    http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/index-101235.html

    When I run the "delete" button I execute the following code (taken as is article)

    public void deleteSelectedRows() {}
    create a second line, the value do not affect all lines
    used in ADF
    Set of rows duplicateRowSet = this.createRowSet ("duplicateRowSet");
    first row to avoid "the attempt to access the value of lines."
    exception line was dead.
    duplicateRowSet.first ();
    retrieve the current row of the table for after
    re-running the VO
    Line currentRow = this.getCurrentRow ();
    Boolean currentRowDeleted = false;
    get all rows that have the transoent attribute
    "MarkForDelete' set to true
    Row [] rowsToDelete =
    duplicateRowSet.getFilteredRows ("MarkedForDelete", true);
    If (rowsToDelete.length > 0) {}
    run only throizgh this code, if there is something to
    delete
    for (line rw: rowsToDelete) {}
    If the row is marked as the current in VO, ts value
    Boolean flag
    If (rw.getKey () .equals (currentRow.getKey ())) {}
    currentRowDeleted = true;
    }
    remove the line - do not yet commit
    RW. Remove();
    }
    rerun VO
    this.executeQuery ();
    reset the current line if it has not been removed
    If (! currentRowDeleted) {}
    this.setCurrentRow (currentRow);
    }
    duplicateRowSet.closeRowSet ();
    }
    }
    "MarkedForDelete" is a transient attribute used to mark the line delete
    The lines are removed very well.
    The problem is with lines that I do not delete.
    For example I LOV column. I chose the value LOV in a few lines, and after that choose to delete several lines (not the same lines where I modified the LOV) but some other lines.
    After I click "delete", the lines that I marked to remove deleted indeed, but the value of the LOV in other rows (I have not scored for delete) are disabled.
    How to preserve value LOV so it will remain also after I deleted some lines?
    P.S. I've tried autosubmit = "true" - it did not help
    			 
    It is expected because I see that you rerun the query.
    

    Once you re - run, it retrieves from the database again. Thus, your values are lost because they are not posted.
    

    I don't think that run query is necessary, try to have a programmatic part trigger on the table after you remove all of the lines.
    

    Thank you
    

    Alisson.
    		   
    •  
          
    Maybe you are looking for