Delivery of the apprentice

Similar Questions

• You have a delivery to the Ukraine?

  You have a delivery to the Ukraine? I just want to buy your products and many Ukrainians also.

  The Apple store does not deliver beyond the borders. There are many independent retailers of Apple products, and some of them may be willing to do international shipping. Be aware that coverage may not be valid in this case.

• Cannot send e-mail error delivery to the following recipient failed permanently

  I tried to send a mail-donkey for a few days now, but I receive the following message:

  Delivery to the following recipient failed permanently:

  microsofthelpdesk@Microsoft.

  Technical details of permanent failure:
  Google has tried to convey your message, but it was rejected by the server for the domain microsoft.com recipient by microsoft - com.mail.protection.. [207.46.163.138].

  The error that the other server returned was:
  550 5.4.1 [microsofthelpdesk@microsoft.]: recipient address rejected: access denied

  What really bothers me is that I've searched for a solution but I think is to wave to me.

  It would be useful that I had a detailed explanation about the error 550 5.4.1 and how to solve this problem.

  It is not a valid email address or it will not be detected.  Care to tell us what is your original problem.

• I received 12 notifications failed delivery on the emails I have not sent. How can I stop this? It has happened.

  I received 12 notifications failed delivery on the emails I have not sent.  How can I stop this?

  Hello

  Sign in to your web account and reset the password if you have not done.

  Thank you.

• Mobile site Muse in lining up properly before their delivery to the domain

  I know that this issue has been addressed in other threads, but I still have to find a solution.

  My mobile site Muse is lining up properly before their delivery to the domain, but looks fine when accessed via Business Catalyst. I used a model to do so. The site is www.wordfrog.ca

  Bad timing that I have to attend a conference this weekend and need a mobile site that is functional.

  Any suggestions? I'm not a web designer - my knowledge of Muse is very present at the end of 'beginner' things...

  Thank you!

  Melanie

  You must really delegate your domain name to the Business Catalyst site. 'Simple advance' mechanisms don't really delegate your domain to which your site is hosted. Instead, they create a site a page on the servers where you bought the domain, then they post your real site inside a frame on this one site page. "Display your site in a frame" visually approach seems to work for most, but it prevents your real site to be able to understand the characteristics of the device/browser where it is displayed and interfering with the correct behavior of your site.

  These resources should be useful:

  Publish Web sites

  Add a domain name to your site using the service DNS of BC

• Delivery of the teacher in China

  Hello

  I am currently teaching post in a school of cinema in China. I wanted to buy adobe Creative Kit of cloud with delivery of the Teachers' ideally. But it seems that Adobe membership is not available in China. Is this an ongoing issue? And is it possible to work around this problem?

  Thank you!

  Adrien

  Hi Adrien,.

  It is available on https://creative.adobe.com/plans

  Value currency HK$ to check the pricing.

  Thank you

  Atul Saini

• I have a question about the delivery of the school.  If I start paying $19.99 a few months before that I control, I keep getting this price for the rest of the year?  Or will I stuck having to pay $50.00 per month until the contract is in place?

  I have a question about the delivery of the school for creative cloud.  If I start paying $19.99 a few months before that I control, I keep getting this price for the rest of the year?  Or will I stuck having to pay $50.00 per month until the contract is in place?

  Student discounts are good for a full year, without worrying if you drop out during this period.

  Mylenium

• Re: specification for parameters of the project and the final delivery of the animations for broadcast HD

  Hi all

  I just finished reading the book of techniques of studio by mark christiansen and I have I have some doubts, maybe, someone working on similar projects can help out me, I hope!

  I live in a PAL country and I especially design and animate the graphics in AE with layers of shape, the illustrator files and psd files. I can work in a proyect for broadcast HD tv and some questions and insecurities had crawled in. I would describe who will be I guess than the workflow:

  1 - setting up the project in AE:

  

  of course, the working color space should be consistent between applications. Linearize is important, but I Don t well grasp the concept.

  (2) my master composition:

  

  Here, the choice of the frame rate should be 25/50 according to the... ? is just a choice if you work with live images of the hd cameras? apply to animations, graphics?

  And last question, which would be the preferred delivery format and the encoding of the file? I know that there is a wide choice, but if you have a set that s works for you and your customers then i´ll be useful.

  Also. If you have an article, you can recommend where there is an explanation very clear be appreciatted, it seems (to me) the deeper you digg I get more confused.

  Thanks in advance!

  You should check with the diffuser. Either they publicly publish their requirements or that they are in a contract. There is not one size fits all here. The best option for the broadcast work is to make a copy almost without loss or loss of your job as a DI (digital intermediate) and then compress the project specifications accurate diffuser using Adobe Media Encoder or another application specifically designed for video compression for delivery. The only time you ever look like an amateur is when you do not ask the specifications. I regularly get the same images different distributors in 6 different formats.

• How to get the number of delivery to the lines AR-Transaction?

  Hello
  
  We try to develop a personalized Transactions AR Invoice output (12.0.5). What our goal is to get delivery number of screen of Transactions at the level of the line. We want to offer it, because our client wants to show number of delivery at the exit of Bill...
  
  How can we make this?
  
  I'll be very grateful for any help
  
  Thanks in advance...
  
  
  Cagri

  When the order line is invoiced, delivery number is stored in the interface_line_attribute3 in the ra_customer_trx_lines_all table.

  Thank you
  Claire

• Delivery of the new laptop

  Hi I just ordered a new laptop from Dell on Thursday and it shipped from China Friday Friday, however, he has no more information followed and scheduled delivery is next week

  Nobody knows how long to leave the room of China? Because I think he's headed the first Poland and then United Kingdom?

  JordanB13

  Unfortunately, the DCF to user, is not user of Dell, you must contact Dell directly for this information.

  See if the following can help you.

  http://www.Dell.com/support/Home/UK/en/ukdhs1/products/?%7eck=MN&c=UK&l=en&s=DHS

  Bev.

• "the apprentice" crypto transform-set issues

  Greetings - I was sort of a backup person or I guess as "Apprentice" to our network administrator who has recently retired. Same story, guess who is responsible now to figure it all out.
  We have a pair of 5510 in the main office, the second is a "fail-over" the death of number 1.
  Our remote offices have 5505 s (system image file is disk0: / asa844-1 - k8.bin) which connect here on LAN-to-LAN via the Internet connection provided to this office by various Internet service providers. Mostly good, some "tunnels" or connections remain for days, or even weeks or sometimes months without any problem.
  But we have some offices of disorder where each connection fall fairly regularly or in one case, they often lose the ability to connect to the connector of the computer central address here. We have different subnets in our offices, the mainframe and email are provided by the State, or IT Enterprise/ITE Central. Some of our 'networks' uses public addresses, some private.
  Each remote office has its own network. The numbering is based on number of office accountant, not that it's really important.
  Thus each remote office will have a private 10.252.xxx.xxx plan where the first xxx film series is the office number and the last series of xxx is the range assign us, normally broke up with a 27 (255.255.255.224) mask.
  This established, a typical office will be 10.252.24.1 - 30 (10.252.24.0 network)
  I was thrown in the fire and said to our offices in problem to understand. In trying to figure out why things are what they are, I find things which surprise me. Can't put my finger on it, but it just doesn't feel good.
  A topic at a time - I find Cisco documentation that says you can assign a MAXIMUM of 6 transform sets to all that.
  HOWEVER, I find more than 6 in the list, 11 actually. I can't understand why so many and what the heck we even need more than 1 or 2 for anyway. I think it's here because updates to the os on the means of years that things seemed simply by the process of update and I think also that some has been everything simply because things have been tried - to throw in and see if it helps. I hate this.
  I want these cleaned and only the code that is required to be left - and in a way I can understand. And if that helps with our connection issues, great, but if not at least things will be easier to sort through and understand.
  This is the area in question for the purposes of this post-
  Looking at the small part of our config in a typical remote office ASA5505 I'll post below - which belongs or is necessary, and what is foreign and may or must be destroyed or deleted.
  Why 11 lines of transform-set?
  Spoke 6 max? (this quote) > after a set of transformation configuration, you assign it to a card encryption. You can assign up to six sets of the transform to a card encryption.

  ----------------------------------------------------------------------
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac (why this?)
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac.
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac.
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac.
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac.
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac.
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac.
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac.
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac.
  Crypto ipsec ikev1 transform-set ESP-DES-MD5 esp - esp-md5-hmac (10 of them besides the next)
  Crypto ipsec transform-set esp-3des esp-md5-hmac ikev1 vpnivrs (kind of sense-vpnivrs is the 'name' and serves...?)
  ivrsmap card crypto 10 corresponds to the address DESENLOG
  crypto ivrsmap 10 card game 209.111.111.666 peers (changed to protect the real address)
  ivrsmap 10 set transform-set vpnivrs ikev1 crypto card
  ivrsmap interface card crypto outside
  Crypto isakmp nat-traversal 30
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10 (why two of these lines of 'political'?)
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  lifetime 28800
  IKEv1 crypto policy 65535 (see above - this is number 2 - why two? in what do this?)
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  --------------------------------------------------------

  Some quick stats or tests.

  VRAMSASA1 # show crypto ikev1 his

  IKEv1 SAs:

  ITS enabled: 1
  Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
  Total SA IKE: 1

  1 peer IKE: 209.111.111.666
  Type: L2L role: initiator
  Generate a new key: no State: MM_ACTIVE

  I can provide any additional information can help.
  I have already corrected some problems by turning the NAT - T on offices provided Internet via a DSL modem, that the modem is apparently a NAT - external interfaces on the 5505 device s with DSL have 192.168 addresses and the MODEM has the Internet address where the provided cable modem sites have a direct public address on the external interface.  Something bothered me on these sites - and I was able to understand what and why. This example configuration above mind right now - but I don't know why.

  Just an another public employee trying to make it work properly, having to learn the hard way now...
  I apologize if this isn't the correct area to post.
  Thank you.

  You are welcome.

  Regarding your questions Suites A and B - two Yes.

  DO first - make a backup of your configuration. It is a good idea during changes of any kind. If you have doubts, backs up front and backup after. Do a comparison aside to check your work. (I use ExamDiff make comparison of less prone to human error long text files.)

  When you have preshared keys (which appear as hashes when you perform a simple "show run"), you must use the following (when recording the output of your senior year):

  term pager 0more system:running-config

  The first line will make all output scroll by at the time and the second will print configuration with pre-shared plaintext keys.

• Delivery of the order

  We have a requirement where total discount to order qualifier should consider point total + delivery + tax price.

  But currently is considering point promotion discount order total. How can we include shipping or taxes in the qualifier of total order.

  Please share your thoughts about the implementation of this scenario.

  It's what makes us to achieve

  1. replace findQualifyingOrder qualifier class method.

  2 copy shipping or taxes price info price order to object to price quote.

  3. call the super.findQualifyingOrder

  4. Once you get MatchingObject, reset shipping and tax in used to sell to the old value.

  Since pricing iteration takes more than once we always get the shipment value & tax corrrect in command price info object. The order total OOTB is the sum of the total + delivery + tax.

  So if your promotion is configured to check the total of the order as the qualifier, then promotion will apply if total + shipping + tax meets the value configured in promotion.

• I can't postpone delivery for the app menu on my HP6700 printer Scheduler.

  Please answer

  You can update the settings on your delivery within ePrint Center application.

  1. Sign in to your account ePrintCenter HP ePrintCenter .

• Cannot open /CS (ContentServer) in environment of delivery in the Webcenter Sites?

  Hello

  I installed webcenter sites 11.1.1.6 on windows 7 using single mode and delivery server environment.

  server_wcs_PRD01 - managed server application is deployed on which CS - port number 7113

  server_cas_PRD01 - managed server application is deployed on which cases - 7115 port number

  The servers are running state as both applications are also in Active state.

  But the problem is that when I type the url of the application cs it throws error as:

  403 - forbidden error

  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:

  10.4.4 403 Forbidden

  The server understood the request, but refuses to fill. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been met, it SHOULD describe the reason for the refusal in the entity. This status code is commonly used when the server does not want to reveal exactly the reason why the request was refused, or when no other response is applicable

  CASE URL correctly runs without error, the problem is that in CS

  Can someone please help why it is happening then?

  With a fresh installation of delivery that you should still be able to access Admin UI http://host: port/cs/Xcelerate/LoginPage.html (assuming that your Sites webapp was deployed with "cs" as the context root), nothing should be published. The user of the WEM/Contrib interface to http://host: port/cs/ are generally not available for delivery type installation.

  These work

  http:// host:port/cs/HelloCS

  http:// host:port/cs/CatalogManager? ftcmd = pingdb

  Login will redirect to the CAs. The 403 error comes cs or case?

  Phil

• s/w of delivery of the oracle

  HI all -
  
  We can install a Server EIS software downloaded from oracle delivery in my company windows servers? We want to use this s/w only for purpose of test and as soon as we have the feeling of s/w, we will intend to buy licenses from Oracle. My undersatnding has been, I can only use the s/w downloaded on my laptop, not in any server of the office. Is this true?
  
  Thank you!

  Vasavya,
  you gave a good answer, but not to question, he asked. You can use it on the servers of the company without any problem. It's not just settled on personal computers. As long as you don't use it in production, you're ok