Dell 1135N error message... Internal error - including corrupted data

Similar Questions

• have an error on my computer - Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt... local profile, what should I do please help

  have an error on my computer - Windows cannot load the locally stored profile.  Possible causes of this error include insufficient security rights or a corrupt... local profile, what should I do please help.

  Hi MelbaIsaiah,

  I suggest you to follow the steps in the article and check if it helps.

  Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP

  http://support.Microsoft.com/kb/318011

  I hope this helps.

• I can't remove avg anti virus they show me error code: 0 x 0070643 error message: internal error générale @AVGMSI_Error 1719

  I can't remove avg anti virus they show me error code: 0 x 0070643 error message: internal error générale @AVGMSI_Error 1719

  You must completely uninstall the remains, you have now or you will have to re - install AVG with a special tool. It can work with only t use this tool to remove it.

  http://www.Avg.com/ww-en/utilities

• I have an 0xC0070678 error code, I uninstalled AVG and reinstalled and now get the error message internal General. MSI engine failed to install the product. Help

  I have an 0xC0070678 error code, I uninstalled AVG and reinstalled and now get the error message internal General. MSI engine failed to install the product.  Now I have no anti virus.help please

  Hello

  It is a specific error of the AVG software. There are number of threads on the same topic on the forums of AVG.
  Reference:
  http://forums.Avg.com/us-en/AVG-free-forum-search?sec=search&Act=show&ID=0&Search=1&type=posts&user_nick=Davo1330&subthemes=1

  http://forums.Avg.com/au-en/AVG-free-forum-search?sec=search&Act=show&ID=0&Search=1&type=posts&user_nick=pcroft&subthemes=1

  See also:
  If you have problem install/uninstall/upgrade to update AVG: AVG 2011 + 9.0 + 8.x uninstall / re-install Instructions
  http://forums.Avg.com/ww-en/AVG-Free-Forum?sec=thread&Act=show&ID=110317

  I hope this helps.

• SBS 2008 WSUS broken - internal error MIcrosoft corrupted database

  Installed WSUS SBS Monitoring Script. checked the that Microsoft internal database is corrupted; need server component Technologies repair disk repair DB.  I tried WSS and WSUS repair tool - mistakes happen;  Tried to uninstall WSUS with errors; tried to manually install WSUS: internal error of Microsoft file corrupted in the log database. Uninstalled MID.  Even impossible to uninstall or repair or install WSUS installed MID, now WSUS reinstall.  Help!

  Kevin

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• The internal organisation of DIAdem data returned an error of initialization

  Hello.

  I have a laptop that is running Windows XP with installed 10.2 DIAdem.

  Main problem: tiara does not start. A few seconds after trying to run it I get a message "ERROR" box saying

  "The internal organization of DIAdem data returned an initialization error."

  Question that might be related: when I connect to the laptop there is an error message saying:

  "The DataFinder cannot start to an internal error. (122): failed to open the configuration file! C:\Documents and Settings\Settings\Application Data\...\my.datafinder< runmode:="" datafinder="" desktop="">

  The directory C:\Documents and Settings\\Local Settings does not exist on the laptop.

  My first thought was to reinstall just DIAdem. However, when I open Add/Remove Programs tiara is not in the list, so I can't uninstall it. When I just try to run the installer it says I need to uninstall the existing version first.

  No idea how I could get DIAdem working again?

  (btw this laptop is used for courses etc in our society, so I do not know how this problem occurred. Just that they have not been able to run the tiara on her for more than a year)

  Hi such,

  in your 1st post you mentioned that you couldn't find tiara in the Add/Remove Programs list.

  => Please look into this list to or . That's because NEITHER has its own entry in the Add/Remove Programs list. Here you should find DIAdem to uninstall.

  You should use MSIBlast if the 'normal' Uninstall failed for some reason. If you use MSIBlast, he could not guarantee that everything is uninstalled in the right order. MSIBlast is not updated on the dependencies between the msi files.

  You told us that the directory C:\Documents and Settings\\Local Settings exist on your laptop. If you have a proper installation of XP, it must be there. It is sometimes invisible because of your windows settings. If this is the case please change your windows settings so that you can see the folders system as well.

  If you found this file, please remove the following folder: "c:\Documents and Settings\Settings\Application Data\National Instruments\Shared\DataFinder". After that start please DIAdem - a new folder with sub folders 'config' and 'data' are created.

  If the error is-, then I have only one idea: If your laptop doesn't have hard enough to free up space to manage all temporary files that occurs during an installation - so maybe it's that this message occurs if you start the installed application. The installer itself is not warn about in each case, overloaded virtual machine, e. g. fragmented hard drive, etc.).

  Hope that some of my points would help you,

  Kind regards

  dietfons

• Windows cannot load the locally stored profile. Possible causes of this error include insufficient __security rights or a damaged local profile. If the problem persists, contact your network administrator. __

  Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a damaged local profile. If the problem persists, contact your network administrator.
  My documents are 'hidden' also

  xpconfused,
  This article explains how to solve problems with a corrupted profile. Article  After return your results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message at startup: error loading: \App Data\Roaming\pxma2.dll C\Users\ (my name). Access denied

  Hello activity (yet) on Vista 32 bit, I receive a message (at the start). Error loading: \App Data\Roaming\pxma2.dll C\Users\ (my name). Access denied. Please notify.

  Hello

  Cannot find this file on Google so you probably dodged some software malware and you should do a
  very thorough control. Message on how to remove the error message if still it y
  After the audits of malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often
  easy to detect malicious software often comes with a much harder to detect and remove the
  payload. So its best to be now too thorough than paying the high price later. Check
  with an extreme overdose point and then run the cleaning only when you are very
  that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap you start, however, you should
  also run in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• Download XPsp3 error 'file corrupted '.

  I ran "SP3: <> http://www.microsoft.com/en-us/download/details.aspx?id=24 ' Microsoft Download site and saved on PC & tried to run. In both attempts, I got an error 'file corrupted '. Is there a suggestions on how to get the update of XP?

  It is reported that security software can inhibit successful installation of SP3. See...

  http://support.microsoft.com/kb/949377?

  Rather that to disable security software, uninstall may be a better choice because some 'disables' is not fully turns off. You already have the SP3 download then try this...

  • Make sure that you have the ability to re - install the security software (re - download or find installers, find a CD etc - also, to study the procedures for this with your provider support pages)
  • Disconnect from the internet
  • Uninstall your security software
  • Install SP3
  • Re-install security software
  • To connect to the internet and do Windows updates and software updates for security

  If you can't count on the possibility of re - install a security software for a reason any then just go with the neutralization of him while applying a SP3.

  You can also read this...

  http://support.Microsoft.com/kb/950717

  Tricky

• Event ID: 7024 with error message: "the Windows Firewall service stopped with the error service specific data are invalid.

  Original title: cannot start Service Windows Firewall: Error Code 13

  Hello.

  Anyway, the Action Center has begun randomly telling me that the Windows Firewall is disabled. When I try to start or return to the default settings, it tells me that it is not able to do.

  I went to Services and Windows Firewall is set to automatic, but it is not started. I try to start it and it tells me that it is not able to do the same. The error code is 13.

  I am an administrator.

  MalwareBytes did find and delete a virus named "Disable.SecurityCenter", but after removing that I am still unable to start the Service.

  Can someone help with this problem?

  Edit: The journal ID is 7024 and description:

  "The Windows Firewall service stopped with the error service specific data are not valid... '. ».

  Hello, Connor

  You can try to perform a system restore to before that the problem started. For instructions on how to proceed, see the following ink: System Restore: frequently asked questions

  You can also try running a SFC scan to check (and repair) system corrupt/modified files. To do this, go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. In the command prompt, type the following command and press ENTER: SFC/scannow

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hearing, prelude and speed Grade CS6 all have not updated on Mac OS El Captain 10.11.3 - download error appears corrupted

  As Adobe Audition, prelude and speed Grade CS6 all has not updated on Mac OS El Captain 10.11.3 - download error appears corrupted. I tried to quit smoking the creative cloud and not luck. Is there a location for updated files I can delete? So that they will be re-installed and is more corrupt.

  Thanks in advance for the help.

  The latetest (cloud) update sometimes does not work with old programs... Try to install your updates manually

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• Errors of the data sources in WebLogic

  Description:

  I have some errors when I run the WebLogic application. Errors due to data sources. Can you suggest me a solution? Thank you.

  Journal:

  < 7 August 2014 23: 27 WEST > < opinion > < WebLogicServer > < BEA-000365 > < Server state has changed to STANDBY. >

  < 7 August 2014 23: 27 WEST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed at the START. >

  < 7 August 2014 23: 28 WEST > < error > < hats > < BEA-149205 > < failed to initialize the application "LocalSvcTblDataSource" due to the error weblogic.application.ModuleException: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: java.net.ConnectException: error connecting to server localhost on port 1527 issued the message Connection refused: connect.

  weblogic.application.ModuleException: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: java.net.ConnectException: error connecting to server localhost on port 1527 issued the message Connection refused: connect.

  at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:338)

  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:100)

  to weblogic.application.internal.flow.ModuleStateDriver$ 1.next(ModuleStateDriver.java:172)

  to weblogic.application.internal.flow.ModuleStateDriver$ 1.next(ModuleStateDriver.java:167)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  Truncated. check the log file full stacktrace

  Caused by: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: java.net.ConnectException: error connecting to server localhost on port 1527 issued the message Connection refused: connect.

  at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:349)

  at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1309)

  at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1226)

  at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:240)

  at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1566)

  Truncated. check the log file full stacktrace

  >

  < 7 August 2014 23: 28 WEST > < error > < hats > < BEA-149205 > < failed to initialize application "SDM-GOSA" due to the error weblogic.application.ModuleException: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: java.net.ConnectException: error connecting to server localhost on port 1527 issued the message Connection refused: connect.

  weblogic.application.ModuleException: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: java.net.ConnectException: error connecting to server localhost on port 1527 issued the message Connection refused: connect.

  at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:338)

  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:100)

  to weblogic.application.internal.flow.ModuleStateDriver$ 1.next(ModuleStateDriver.java:172)

  to weblogic.application.internal.flow.ModuleStateDriver$ 1.next(ModuleStateDriver.java:167)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  Truncated. check the log file full stacktrace

  Caused by: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: java.net.ConnectException: error connecting to server localhost on port 1527 issued the message Connection refused: connect.

  at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:349)

  at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1309)

  at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1226)

  at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:240)

  at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1566)

  Truncated. check the log file full stacktrace

  >

  < 7 August 2014 23: 28 WEST > < error > < hats > < BEA-149205 > < failed to initialize application "opss-audit-DBDS" due to the error weblogic.application.ModuleException: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: java.net.ConnectException: error connecting to server localhost on port 1527 issued the message Connection refused: connect.

  weblogic.application.ModuleException: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: java.net.ConnectException: error connecting to server localhost on port 1527 issued the message Connection refused: connect.

  at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:338)

  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:100)

  to weblogic.application.internal.flow.ModuleStateDriver$ 1.next(ModuleStateDriver.java:172)

  to weblogic.application.internal.flow.ModuleStateDriver$ 1.next(ModuleStateDriver.java:167)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  Truncated. check the log file full stacktrace

  Caused by: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: java.net.ConnectException: error connecting to server localhost on port 1527 issued the message Connection refused: connect.

  at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:349)

  at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1309)

  at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1226)

  at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:240)

  at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1566)

  Truncated. check the log file full stacktrace

  >

  < 7 August 2014 23: 28 WEST > < error > < hats > < BEA-149205 > < failed to initialize application "opss-audit-viewDS" due to the error weblogic.application.ModuleException: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: java.net.ConnectException: error connecting to server localhost on port 1527 issued the message Connection refused: connect.

  weblogic.application.ModuleException: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: java.net.ConnectException: error connecting to server localhost on port 1527 issued the message Connection refused: connect.

  at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:338)

  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:100)

  to weblogic.application.internal.flow.ModuleStateDriver$ 1.next(ModuleStateDriver.java:172)

  to weblogic.application.internal.flow.ModuleStateDriver$ 1.next(ModuleStateDriver.java:167)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  Truncated. check the log file full stacktrace

  Caused by: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: java.net.ConnectException: error connecting to server localhost on port 1527 issued the message Connection refused: connect.

  at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:349)

  at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1309)

  at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1226)

  at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:240)

  at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1566)

  Truncated. check the log file full stacktrace

  >

  < 7 August 2014 23: 28 WEST > < error > < hats > < BEA-149205 > < failed to initialize the application 'opss-data-source' because of the error weblogic.application.ModuleException: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: java.net.ConnectException: error connecting to server localhost on port 1527 issued the message Connection refused: connect.

  weblogic.application.ModuleException: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: java.net.ConnectException: error connecting to server localhost on port 1527 issued the message Connection refused: connect.

  at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:338)

  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:100)

  to weblogic.application.internal.flow.ModuleStateDriver$ 1.next(ModuleStateDriver.java:172)

  to weblogic.application.internal.flow.ModuleStateDriver$ 1.next(ModuleStateDriver.java:167)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  Truncated. check the log file full stacktrace

  Caused by: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: java.net.ConnectException: error connecting to server localhost on port 1527 issued the message Connection refused: connect.

  at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:349)

  at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1309)

  at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1226)

  at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:240)

  at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1566)

  Truncated. check the log file full stacktrace

  >

  Hello

  Follow these steps:

  1 stop of applications using stopweblogic.sh

  2. closing of the database

  3 judgment of the listener.

  Now,.

  1. start the listener

  2. start the database

  3. start weblogic.

  It will work I guess

  Kind regards

  Rous

• Equium P300-16 t - system error writing Configuration data

  Salvation message for the first time

  I have a Toshiba Equium P300-16 t and it has developed an error starting on the screen, it says

  System error writing Configuration data
  F1 - F2 CV - Bios settings

  When it appears that I can't get the option of recovery for work the bios settings seem to be completely in-accessible.

  This error appears just under the version number of the bios and the specifications of the RAM, just after the toshiba screen. The laptop is also a beep which I think is its length bios error code just two beeps very loud and even with a very short break inbetween

  On the page that appears after F1 (curriculum vitae) is pressed it shows just an another two options that are
  F2 - Setup F12 Multiboot Menu selection

  None of these options no matter what and the system is just idle on this screen.

  Obviously, without the bios menu there is not much I can do

  Really research help solve this problem as im not very clued up on the configurations of the system

  Oh and incase it allows... BIOS version - PhoenixBIOS 4.0 release 6.1

  Thanks in advance
  Kris

  Hi mate

  It would be interesting to know if the HARD drive is listed in the BIOS.
  Could you if you please check this?
  In the BIOS, you should see the HARD drive and HARD drive details
  If it is not visible, then that would mean that the HARD drive is faulty and therefore the operating system cannot be started.

  In this case, the HARD disk needs to be changed.

• Error: 0x8007000D: the data are incorrect on renaming a folder

  Hi, I am Nader... I have this problem recently when I come to rename a folder, it throws the error "error: 0x8007000D: these data are incorrect. Just at the moment where I click on try key it shows works. If it works, is a little annoying. Would appreciate some help here.

  NSK

  HI naderskhan,

  The problem occurs only with certain folders or all folders?

  Perform these steps and check if it solves the problem:

  Step 1:

  I suggest to create a new user account and check if it makes a difference.

  Refer to this link for help:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If it solves the problem, you can fix the damaged user profile.

  See this link:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Step 2:

  Perform a clean boot to verify if a third-party program or service is the cause of the problem.

  Refer to this article for more information:
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 of article.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• ORA-02354: Error exporting/importing data, ORA-01555: snapshot too old: rollback segment number with the name "" too small

  Hello

  I am getting below error while taking expdp backup table of BLOB.

  ORA-31693: Data Table object 'HCLM_ADMIN '. "' SCAN_UPLOADEDFILES_TEMP ' failed to load/unload and being ignored because of the error:

  ORA-02354: Error exporting/importing data

  ORA-01555: snapshot too old: rollback segment number with the name "" too small

  ORA-22924: snapshot too old

  ORA-31693: Data Table object 'HCLM_ADMIN '. "' TPA_FAXWATCHER ' failed to load/unload and being ignored because of the error:

  ORA-02354: Error exporting/importing data

  ORA-01555: snapshot too old: rollback segment number with the name "" too small

  ORA-22924: snapshot too old

  We have already set aside retention to 50000 .table structure are:

  SQL > show Cancel parameter

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  UNDO_MANAGEMENT string AUTO

  UNDO_RETENTION integer 50000

  undo_tablespace string UNDOTBS1

  SQL > alter table hclm_admin. SCAN_UPLOADEDFILES_TEMP modify lob (FILE_BLOB) (RETENTION);

  Modified table.

  SQL > select nom_de_colonne, pctversion and retention

  from dba_lobs where owner = 'HCLM_ADMIN' and table_name = "SCAN_UPLOADEDFILES_TEMP";

  COLUMN_NAME

  --------------------------------------------------------------------------------

  PCTVERSION RETENTION

  ---------- ----------

  FILE_BLOB

  50000

  SQL > alter table hclm_admin. TPA_FAXWATCHER modify lob (FILEDATA_BLOB) (RETENTION);

  Modified table.

  SQL > select column_name, pctversion and retention of dba_lobs where owner = 'HCLM_ADMIN' and table_name = "SCAN_UPLOADEDFILES_TEMP";

  Column_name PCTVERSION RETENTION

  ---------- ----------

  FILE_BLOB

  50000

  CREATE TABLE HCLM_ADMIN. TPA_FAXWATCHER

  (

  FILENAME_VAR VARCHAR2 (50 BYTE),

  DATE OF CREATED_DATE_DTE,

  FILEPATH_VAR VARCHAR2 (100 BYTE),

  DATE OF TIMESTAMP_DTE,

  FAXNO_VAR VARCHAR2 (15 BYTE),

  DEPARTMENT_VAR VARCHAR2 (50 BYTE),

  REQUESTTYPE_VAR VARCHAR2 (50 BYTE),

  TAGTO_VAR VARCHAR2 (50 BYTE),

  REMARK_VAR VARCHAR2 (1000 BYTE),

  DOCTYPE_VAR VARCHAR2 (50 BYTE),

  TAGTOVALUE_VAR VARCHAR2 (50 BYTE),

  DOCTYPE_OTHER_VAR VARCHAR2 (50 BYTE),

  HEGIC_NO_VAR VARCHAR2 (50 BYTE),

  RECORDNO_NUM NUMBER OF NON-NULL,

  FILEDATA_BLOB BLOB,

  DATE OF FAXLOCKDATE_DTE,

  NUMBER OF FAXLOCKSTATUS_VAR

  FAXLOCKBYUSER_VAR VARCHAR2 (50 BYTE)

  )

  (STORE AS) LOB (FILEDATA_BLOB)

  TABLESPACE HCLM_ALERTSVC

  ALLOW ONLINE STORAGE

  8192 CHUNK

  RETENTION

  NOCACHE

  LOGGING

  INDEX)

  TABLESPACE HCLM_ALERTSVC

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  PCTINCREASE 0

  DEFAULT USER_TABLES

  ))

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  PCTINCREASE 0

  DEFAULT USER_TABLES

  ))

  TABLESPACE HCLM_ALERTSVC

  PCTUSED 0

  PCTFREE 10

  INITRANS 1

  MAXTRANS 255

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  PCTINCREASE 0

  DEFAULT USER_TABLES

  )

  LOGGING

  NOCOMPRESS

  NOCACHE

  NOPARALLEL

  MONITORING;

  ALTER TABLE HCLM_ADMIN. (ADD) TPA_FAXWATCHER

  KEY ELEMENTARY SCHOOL

  (RECORDNO_NUM)

  USING INDEX

  TABLESPACE HCLM_ALERTSVC

  PCTFREE 10

  INITRANS 2

  MAXTRANS 255

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  PCTINCREASE 0

  ));

  CREATE TABLE HCLM_ADMIN. SCAN_UPLOADEDFILES_TEMP

  (

  NUMBER OF TEMPID_NUM

  SESSION_ID VARCHAR2 (200 BYTE),

  NUMBER OF UPLOADFILE_NUM

  NUMBER OF DOCNO_NUM

  NUMBER OF SCANJOB_NUM

  FILENAME_VAR VARCHAR2 (200 BYTE),

  FILETYPE_VAR VARCHAR2 (200 BYTE),

  FILE_BLOB BLOB,

  VARCHAR2 (200 BYTE) FLAG,

  NUMBER OF USERID_NUM

  CREATED_DATE DATE

  )

  (STORE AS) LOB (FILE_BLOB)

  TABLESPACE PHCLMDBTBS

  ALLOW ONLINE STORAGE

  8192 CHUNK

  RETENTION

  NOCACHE

  LOGGING

  INDEX)

  TABLESPACE PHCLMDBTBS

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  PCTINCREASE 0

  DEFAULT USER_TABLES

  ))

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  PCTINCREASE 0

  DEFAULT USER_TABLES

  ))

  TABLESPACE PHCLMDBTBS

  PCTUSED 0

  PCTFREE 10

  INITRANS 1

  MAXTRANS 255

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  PCTINCREASE 0

  DEFAULT USER_TABLES

  )

  LOGGING

  NOCOMPRESS

  NOCACHE

  NOPARALLEL

  MONITORING;

  Kind regards

  Hello

  First check the lob corrupt as:

  SQL > create table corrupted_lob_data (corrupted_rowid rowid);

  Table created.

  SQL > set off concat

  SQL >

  declare

  SQL > error_1555 exception;

  pragma exception_init (error_1555,-1555);

  number num.

  Start

  for cursor_lob in (select rowid r, & lob_column of table_owner. & table_with_lob) loop

  Start

  NUM: = dbms_lob.instr (. cursor_lob & lob_column, hextoraw ('889911'));

  exception

  When error_1555 then

  insert into corrupted_lob_data values (cursor_lob.r);

  commit;

  end;

  end loop;

  end;

  2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

  17.

  Enter the value of lob_column: FILE_BLOB

  Enter the table_owner value: hclm_admin

  Enter the value of table_with_lob: SCAN_UPLOADEDFILES_TEMP

  former 6: for cursor_lob in (select rowid r, & lob_column of table_owner. & table_with_lob) loop

  6 news: for cursor_lob (select rowid r, FILE_BLOB of hclm_admin loop SCAN_UPLOADEDFILES_TEMP.)

  old 8: num: = dbms_lob.instr (. cursor_lob & lob_column, hextoraw ('889911'));

  8 new: num: = dbms_lob.instr (cursor_lob. FILE_BLOB, hextoraw ('889911'));

  PL/SQL procedure successfully completed.

  SQL > select * from corrupted_lob_data;

  CORRUPTED_ROWID

  ------------------

  AAASF/AAKAABacyAAA

  To resolve this problem, we have 3 options

  (1) to restore and recover the LOB segment using physical backup.

  (2) empty LOBs affected using the UPDATE, as mentioned in the Note 787004.1statement:

  SQL > update SCAN_UPLOADEDFILES_TEMP

  Set FILE_BLOB = empty_blob()

  where rowid in (select corrupted_rowid

  of corrupted_lob_data);

  SQL > commit;

  (3) perform the export, excluding the corrupt ROWID. by adding the following to export command parameter

  Query =------"where rowid not in (\'AAASF/AAKAABacyAAA\'\) \ \" "

  Kind regards

  Alok Dwivedi