Equium P300-16 t - system error writing Configuration data

Similar Questions

• Satellite A210 - system error writing configuration data

  Hello

  Cannot start. On the start screen have the message: write data the system configuration error. Only options F1(setup defaults) and F2 (setup). This occurs after flashing the BIOS.

  Computer laptop satellite A210 model PSAFJE.
  BIOS file was: M10A200. ROM

  Its possible flash from the BIOS? Maybe isn't here document key or combination of keys?

  Any ideas?

  Arturas

  Post edited by: Arturas

  Hello

  > This happens after flashing the BIOS.

  Looks like something was wrong with the Bios flashing procedure. To reflash the bios you back base Bios and usb floppy.

• Equium P300-16 t - Windows error recovery screen

  It started with not to connect to the internet and to say that something did not launch. I looked on the forum and he said press F8 chose the first option (to fix your computer), I did.

  Then he took me to a with option 2 windows error recovery
  -Launch Startup Repair (when press screen becomes black for 1 second, then goes back to the same screen)
  -Start windown normally (when press turns the computer on and back on bringing me back to the same screen)

  Now when I turn it on charges it takes me to the windows error recovery screen. And no matter what I push on I always end there.

  Hope someone can be useful

  Hello

  Looks like something was wrong with the recovery process and now Windows may start t. Maybe something messed with the registry or a few important Windows files, so I think that the only option to get rid of it using the Toshiba recovery disc. It will wipe the entire HARD disk and restore the factory settings, normally it should work.

  Just so enter the Toshiba Recovery disk and follow the instructions on the screen. Windows will be reinstalled, and you get back to factory settings. :)

• Boot Configuration data file - knows how to solve the need advice that no one shared

  Hello

  I just got the

  Recovery: Boot Configuration data file is missing fileh \bcd

  error code 0xc000000d

  To solve that I need to get the windows disc 8 to repair the laptop, the only problem is that I don't have the disc that I just moved away from home in my own apartment for uni and don't have another computer of the rhe download files on a usb key and recover the laptop, so I thought I just buy windows 8 and install it on my computer and hopefully solve this , but it might not work because my computer came with Windows 8 installed so I could stuff something im not sure and it's just my brain fusion trying to understand this point, so if anyone has any what advice id greatly appreciate, oh and sorry if this isn't the best grammar mode spelling etc. IM on my phone and it is laggy as phones get, thanks.

  Dan G

  Hello Daniel,.

  Thanks for posting your query on Microsoft Community forum.

  According to the description you get the error Boot Configuration data (BCD). I totally agree with you that, in order, to rebuild the Boot Configuration data (BCD) we need the installation media.

  If you do not have any other computer to create the installation media, then it is best to contact the manufacturer of your computer instead to buy Windows from outside. If your computer is under warranty, they can provide you with the ERD free of charge or at minimal cost.

  If you manage to organize other computers or repair disk, try the steps below. You can try to create installation media by following the steps described in the article mentioned below.

  To create installation media Windows 8.1

  • Boot from the DVD of Windows 8.
  • Click repair your computer.
  • Click Troubleshooting , and then select Advanced Options.
  • Click on command prompt and type the following commands and press enter after each command:

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  • Restart the computer.
  • Check if the problem persists.

  Get back to us with your question was last updated. We will be more than happy to help you.

  Kind regards

• Error restoring my Equium P300-16 t

  Hello

  I wonder if anyone can help me? I'll be honest and admit, I'm not surprisingly technical interest, but I'll have a go!

  Basically, I tried to restore my factory settings on my equium p300-16 t (F8 menu path, not with a cutting-edge disc) and went halfway through reinstalling my battery!

  Now when I turn on my computer it goes straight to the menu "windows error recovery" that says "Windows is not stopped successfully. If it was because of the system does not, or if it has been closed to protect data, you might beable to recover by choosing safe mode configurations from the menu below '.

  Can I get the startup options of my laptop in safe mode, safe mode with the mode of networking, security with command prompt, or start windows normally.

  I can't start in safe mode and only get a pop up menu saying "Windows is unable to complete the installation in safe mode. To continue installing windows, restart the computer. »

  When I restart the computer and start windows normally, my computer starts to continue re installation, saying "the installation may take several minutes. Please do not break in closing the computer! ». However, I can't get beyond this menu. It is present on my screen for 5 hours now, with the loading bar.

  If anyone has any advice or can tell me what I managed to do it, I would be eternally grateful!

  1 million thanks!

  Hello Elizabeth

  I'm sorry to hear you have this problem with this great P300 notebook.
  Please don't get me wrong, but you made a big mistake. In s manuals are strictly advised not start battery power recovery procedure.

  At this point, I have two important questions:
  Can you raise your laptop computer with F8 and repair my computer option is available?
  You have created recovery DVD suite preinstalled Toshiba reminder and instructions contained in operating manuals s?

• Equium P300-16 t - error Code 0 x 490

  I have a laptop Equium P300-16 t.

  I had an attached external hard drive, 5 minutes later computer started making a loud noise and froze, it off using the top off button.
  Turned he went back on start-up repair mode ran it for about 30 minutes then indicated it could not be repaired system manufacturer or contact admin (us).

  Research on the Startup Repair diagnosis page that everything seemed to be spent out of the last thing here is what he said Word for Word

  No os found on disk file
  Code Repair: failed. Error = 0 x 490
  time taken = 14726ms

  I can't go to the login page it stops in this starting point upward.

  Help.

  Hello

  Resemble something happened with the operating system on the HARD drive.
  Eventually, the HARD disk or partition on the HARD disk is damaged.

  You are able to install the OS once more?

  Can you see the HARD drive in the BIOS?

• Equium P300-16 t winlogon.exe error - badimage

  Hello

  I encounter an error that my Equium P300-16 t starts to windows Vista.

  This is what happens...

  Winlogon.exe - BadImage
  C:\windows\system32\KBDUK. DLL is not designed to run on windows or it contains an error. Try to reinstall with original media or contacting... blah blah blah.

  It began to appear after I tried to uninstall my Norton antivirus has expired. And it seems that the result of this error is that I can not connect detect wireless networks. so no internet! the age of darkness here I come.

  I don't know who this KBDUK file is so I am worried to take it off.
  I tried to restore to before I made changes but its made no difference - I broke it.

  Any help would be much appreciated.

  Thank you

  Dave

  Hello

  Maybe this KBDUK. DLL file is a virus or has something to do with your old Nero

  If you Norton from your system you must also run the Norton removal tool that you can download from the homepage of Symantec. It removes all the files of Norton products.
  Check this box!

  If it doesn t work I would try a system restore to an earlier point. After that you can try to delete Norton again.

• Read error - SOLUTION system configuration data

  Today, I found a solution to the error of notorious boot not only on the toshiba, but some other brands also.

  The error is: System configuration data read error.
  He invites to start with 2 beeps which prevents the computer laptop Moldavian from.

  I tried everything I could to remve this message but noything helped me.
  Replace all, cmos battery, updated the bios, loader, drives, keyboard and etc.

  Today, I found a solution very simple that I want to share with you guys.
  This solution worked for me and I hope it will work for you too.

  Are you ready? :)

  Go to the Bios and change the Bios language french.

  Post here if it works for you also.

  Thanks for sharing your experience with us. But its really hard to believe that your solution would be linked to all devices such problem

  However, good to know that this small change in the BIOS has helped you to resolve the issue

• Satellite A300D-135 - BIOS - System Configuration data read error

  After starting a Satellite A300D-135 laptop computer, the following error message appears:

  
  3070M extended RAM passed
  512 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: TSSTcorp CDDVDW TS-L632H
  Fixed disk 0: TOSHIBA MK2546GSX
  Initialized the mouse
  ERROR
  System Configuration data read error

  Press to resume, installation

  After pressing F1 the machine starts Windows, very well, but the error message is quite irritating, while it comes with a loud BEEP

  I tried the following things so far (in that particular order):
  -Load BIOS default
  -Flashed the BIOS with the latest version of the BIOS (2.80) for this type of model
  -Reinstalled windows with HARD drive format

  All the these did not work.

  I saw the same message appearing on several places on the internet (on different laptops with a Phoenix BIOS in common), but so far I have not been able to find a working solution.

  It might me a hardware problem, but all devices (vga, soiund, lan, wifi, usb, hdd) seem to work perfectly under Windows, so this does not seem the question). Another solution that is mentioned in some forums, replace the battery. But because the phone keeps time correctly I don't think it's the case either.

  Any ideas?

  Kind regards
  GJ

  Hello

  The POST (power on self-test) BIOS checks and detects errors on the motherboard.
  I think it has something to do with the hardware on the motherboard problem.
  I doubt that you can solve this if update of the BIOS and the BIOS default settings didn't change that.

  What to say; I think that the technician of the ASP should run tests to check what's wrong or what cause this I think it is question of s mobo.

• I can't export the registry, I get an error writing the file., it is said, "there may be a disk error or system files" what can I do?

  I kept getting an error of my Norton internet security. When I call there suport tech, they made me do somethings, but nohong has worked. Then they wanted me to try to export the registry. When I wnt in regedit to export it.  He said that there was an error writing the file, there may be a disk or FFL system error.

  Assuming that there really may be a disk or file system error, try to perform a 'chkdsk' on your hard drive.  Use the /R if running chkdsk or check both options if you use the GUI version.

  "How to perform disk error in Windows XP check"
    <>5 http://support.Microsoft.com/kb/31526>

  Be forewarned that control the boot volume occurs at the next reboot after you set up, it runs before Windows starts perfectly, cannot be interrupted and can take more than a few hours to run according to the size of the disk and the amount of corruption, as appropriate.  Run it when you won't need your machine for awhile.

  HTH,
  JW

• Computer laptop Gateway does not load windows Vista, reads configuration data read error: System.

  OK a friend knows me to fix his laptop. Apparently what she was experiencing major problems, so he erased the disc and tried to reinstall Win Vista from disk. Will not work. I can get to where you can choose a partition to install the operating system to, and it says: Windows cannot find a system volume that meets its criteria for installation. My friend says he has just tried, form disassemble the computer an audit of all the parties to try ALL the different options during installation, as well as the options for the BIOS. Any ideas people? Here are the approximate specifications, because the owner has not been able to get the computer working for awhile:
  4 GHz, 4 GB RAM computer Gateway laptop, 2006, Phoenix TrustedCore, and a string of other interesting info that appears on the first screen of the error:

  9D.03 BIOS version

  632K RAM passed system
  3966M extended RAM passed
  1024 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: Optiarc DVD RW AD-7563 has
  Fixed disk 0: WDC WD2500BEVS-26VATO
  Initialized the mouse
  Updated System Configuration data
  ERROR
  System Configuration data read error.

  I'm not very tech savy and I'm not the owner of the PC, so I don't know all about it so go easy on me :).

  If your friend tried to reinstall Windows by using the defined gateway recovery disc (and this is the best way) and this recovery fails, the laptop has hardware problems. Disassemble laptops is a fickle business at best and while it sounds like the hardware problems started before your friend did this, it may have put the nails in the coffin of the laptop to take apart.

  At this point, you can try troubleshooting hardware or your friend can take the laptop to a competent professional (not a type of BigComputerStore/GeekSquad of the place). However, if the laptop has had hard use, your friend must remember that a cell of 4 years with major hardware problems probably won't be cost effective to repair.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot MS - MVP - Elephant Boy computers - don't panic!

• I can not install Seagate Crystal reports 6.0 Massage I got is system error configuration configuration is not complete (after 36% of installation)

  I can not install Seagate Crystal reports 6.0 Massage I got is system error configuration configuration is not complete (after 36% of installation)

  Hi elbashkateb,
   
  I suggest you to remove Seagate Crystal Reports from your computer by using the windows cleanup utility. Then download this software again and try to install in clean boot mode.
   
  Download link for the windows Cleanup utility: http://support.microsoft.com/default.aspx/kb/290301  
   
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Steps to clean boot mode:

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.

  Now, try to install the program and check.
  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  Hope this information is useful.
   
  Umesh P - Microsoft Support

• Unable to start Win8. Error: "0xc0000098. "The boot configuration data file contains no valid information for an operating system".

  Original title: Windows 8 will not start

  I have a pre installed Windows 8 pro and have therefore no disks in the system. It does not start, but I get a message from the "Windows Boot Manager" with the message "Windows couldn't boot...". «, etc, etc and told to contact the ' system administrator or computer manufacturer...» "then the information:
  File: \BCD
  Status: 0xc0000098
  Info: the boot configuration data file contains no valid information for an operating system.

  How can I get it back? Can I get a system disk or can I do?

  Hi David,

  Thank you for getting back to us with additional information.

  If you have another computer with Windows 7 or Vista installed, you can create Windows 8 DVD installation of this system. But you need to get the product key Windows 8 of the manufacturer of the computer. Please refer to this link and create a DVD of Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Hope this information is useful.

• Equium P300-16 t BSOD and black screen after the removal of GPU

  I have a Toshiba Equium P300-16 t and I was getting 90 c - 95B on realtemp so I bought a thermal paste of isopropol alcohol and yesterday that I changed the thermal past on the CPU and the GPU.

  When I booted up after that there was a long beep that lasted a few seconds and my speakers a few cracking apart from that everything was normal, but then after a few minutes my screen is odd (for example, green artifacts) and then went black.

  After awhile, I started my laptop to the top and the same thing happened with the speakers and a beep but the screen was fine. I opened realtemp and became c 65 - 70 c, then restarted because of an Avast update.

  Now, when I turn on my laptop the screen becomes either black or I get a BSOD 0x0F4. I tried to boot from a USB Win7 and repair, but the rest screen went black, so it is not a HARD drive problem as some sites say (from the BSOD error).

  BSOD is mainly a product of serious software problems or it seems due to a malfunction of the equipment.
  I guess this is NOT question related software since you don't touch software (am I right?). So I think you damaged somewhere during the disassembly of the laptop or the removal of CPU and GPU.

  I have no other way for you to control the affected parties? How?
  I guess you need a help from a technician who would be able to analyze the material for potential problems.

• Equium P300-19O does not start

  Hi all

  I have an Equium P300-19O, which I have had the problem. Now the pc doesn't even start not at all. When I turn it on, there is not even a power light and it doesn't do anything.
  Could someone of you please advice me to solve this problem and resuscitate Equium P300-19O?

  Best regards

  Taro

  > Could someone of you please advice me to solve this problem and resuscitate Equium P300-19O?
  You must understand the hat on this virtual path that nobody of can say for sure what is wrong there and we can only speculate on the potential problem.
  Who knows what's wrong there. Maybe there is a problem with electronic control gear.

  Unplug the power plug, remove the battery and leave it for a while. Try to start the laptop with AC power only.
  When you connect the AC power supply is LED on indicator system turned on?
  Is there a reaction when you press the power button / stop?