Dell e7240 control vault\Audio driver Windows 8.1 missing after the deployment of the osd

Similar Questions

• Precision M4700 and IDT Audio Driver (Windows 8 x 64)

  Hello

  I have a problem with my new Dell Precision M4700 with Windows 8 x 64.

  I can not install audio driver IDT high definition. During the installation, I get the error message 'the hardware found is not supported by this package IDT', or if I try to use the manual installation, I get the message "unable to install the driver. A device is not active ".»

  I think that the audio device is disabled, but don't know where to check.

  Thanks for any help.

  OK, I found the problem.

  Now Audio work perfectly.

  The problem was related to the pilot HDAudBus (HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services------HDAudBus) which was fixed with the start (REG_DWORD) 0 x 4 (disabled). Set to 0 x 3 and rebooting, everything has been implemented.

  Thank you all.

• Upgrade Windows 8 Pro blocked after the first reboot

  I have a HP Media Center PC m7470n. When I upgraded with Windows 8 Pro disc, after the first reboot, it gets stuck on the Windows form with turning points. He's not going back to XP and when I stop and restart, he goes right back to the same screen. I tried to boot from a hard drive and CD ROM with the disc in. I also tried to do a system restore, but it still maintains just that goes back to the same screen. , I even contacted Microsoft Support and after 1 1/2 hours, I had to let go because I had to go to work and they do not have a solution for me. I am not able to go in Mode safe either. Can someone help me with this update or at least get back to XP so that I can at least use my computer? At the moment I feel that Windows 8 Pro comes to have my computer in an oversize weight.

  Hello

  Thanks for posting the question in the Microsoft Community. If I understand correctly, you can not connect to the computer. I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  I suggest you follow the steps:

  (a) starting from the DVD of Windows 8.

  (b) click on repair your computer.

  (c) click on troubleshoot.

  (d) click on Advanced options , and then click auto repair.

  (e) follow the on-screen instructions and complete the repair.

  If you are always faced with the question, please respond with more information, and we will be happy to help you.

  Thank you.

• My right click menu is missing after the use of security of Kaspersky application control settings.

  Right click menu disabled

  My right click menu is missing after the use of security of Kaspersky application control settings.

  My right click menu is missing after the use of security of Kaspersky application control settings.

  This tutorial will help?

  Context menu - enable or disable

  http://www.Vistax64.com/tutorials/140508-context-menu-enable-disable.html

  Option One is the easiest.

• Windows updates always installed after the return to a previous restore point?

  A restore point to bring victory 7professional. What will happen with the windows updates that came after the restore point?  Clicking on updates windows just always looking for updates, nothing happens. Updates are received before the restore point still installed?

  Windows update itself creates one in order to make them reversible. To resolve the issue, see updated:

  Windows 7 update problems? First read this.

  Best regards, VZ

• Impossible to install the audio driver Windows XP Home for my Satellite A110

  Hello!

  I formatted my hard drive and now I have reinstalled Windows XP on my TOSHIBA SATELLITE A110-160.
  I don't have the recovery CD, but I have downloaded all the drivers from toshiba.com.
  The thing is, when I try to install the audio driver Realtek HD, I get a message that I have loaded on my system bus driver so
  to install the Realtek HD audio driver!

  So I don't know what to do, and I can't play the audio in my laptop!

  Please, help me!

  Before you start to install a driver available, please download and review the Instructions for installations.
  You'll find order exact facilities. Please follow this wnd control facilities that everything will be OK.
  Have you installed the chipset utility first?

• Need to Conexant Audio Driver Windows XP 64-bit for satellite P300 (PSPCCE)

  Need Driver Audio Windows XP 64 for 1 year Satelite P300 (PSPCCE).

  If any body can help please!

  I instaled Windows XP Proffesional 64 bit, Service Pack 2.

  The Milkeficent provided by Toshiba (Conexant Windows XP 3.47.1.50 is not 64-bit driver!
  ) fails because it can't find the (mmdriver.inf) file in the system32 folder.

  The file exists and is not crrupted or damaged. WHY he falls down?

  I'm not sure but looks like these sound card drivers for a 64 bit of Vista and not XP 64 bit OS OS
  You have to search on external Web pages to a 64-bit XP Conexant audio driver!

• Unable to install audio driver Windows XP Home edition on friends Satellite Pro A100

  Hey guys
  One of my friends has a Satellite Pro A100 722 he had some viruses on the laptop that a local store has quoted £40 for removing viruses etc.
  When he told me that he had to pay £40, I proposed to install xp so that it can remove viruses.
  I installed my copy of xp on my 2 pc and laptop with no problems.

  After the xp installed when I try to install the realtek hd audio driver, it seems that they install but after reboot I still they yellow! in the Device Manager.
  Im very used to reinstall I do not my 4 pc every 3 months, but for whatever reason this Satellite Pro doesn't want to play ball.

  Ive been trying to install drivers for 2 days and do not want to give my friend a laptop without all the drivers installed
  Ive noticed the other toshiba user suffer from similar problems on a100 - could someone help me pls im just trying to save a friend of money as all my normal reinstalls go very well.

  But after 2 days of trying to install different drivers I want to throw out the window :)
  Thank you

  Hello

  What version of Windows XP Home edition, you have installed (SP?)?
  Which driver do you use?
  This driver is downloaded from the Toshiba support page?

• Desktop HP 7900 (graphics and Audio Driver) - Windows 8.1

  Dear all,

  Recently, I've migrated my PC (HP 7900) to Enterprise 8.1 32-bit Windows.

  My audio and video drivers do not work properly. I tried Googling with the hardware ID, but could not get the drivers.

  I paste the ID of material once more

  Graphics    PCI\VEN_8086 & DEV_2E13 & SUBSYS_3034103C & REV_03

  Audio   HDAUDIO\FUNC_01 & VEN_11D4 & DEV_184A & SUBSYS_103C3034 & REV_1002

  Can anyone help or point in the right direction?

  

  

  After installing the audio driver for Windows 7, its working now.

  Audio

  http://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45615.exe

  Graphics

  http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54816.exe

• Dual Boot Vista/WXP - cannot install audio driver Windows XP Home edition

  Hello
  I installed Vista on a P105-S9722 (it works fine) and created a second partition for installation of Windows XP Home edition. Everything is ok except that I'm unable to install the Conexant audio driver (I have a yellow exclamation point in device next to Conexant High Definition Audio Manager). Earlier I was able to install it on a simple boot WXP partition.

  Thanks a lot for your help.

  Have you tried installing the driver for Windows XP audio right?
  I found another thread that you have posted here in the forum and you not known websites where to find the correct drivers.

  I found this audio driver XP for Satellite P105-S9722

  Conexant Audio for Windows XP driver version: 3.11.0.51

• Reference Dell PERC H710P: Firmware hangs on Windows RTM 8.1 with the default driver

  My H710P Dell (with the last FW A04) PERC was working completely fine with the driver 5.2.220.64 on Windows 8, until recently, I tried installing Windows RTM 8.1 on the machine, it caused hang FW at the launch of the Windows installation:

  266	[Information, 0]	05 seconds restart	Controller ID: 0 edge revision: A01	1367
  261	[Information, 0]	05 seconds restart	Controller ID: 0 Package version 21.2.0 - 0007	1366
  141	[Information, 0]	05 seconds restart	Controller ID: 0 battery present	1365
  1	[Information, 0]	04 seconds restart	Controller ID: 0 Image version: 3.130.05 - 2086	1364
  0	[Information, 0]	04 seconds restart	Controller ID: 0 has started the initialization of the Firmware: (PCI ID 0x5b / 0x1000 / 0x1f31 / 0 x 1028)	1363
  15	[Fatal, 3]	2013-09-11 21:00:27	Controller ID: 0 Fatal firmware error of: line 1232 in... /... /RAID/1078dma.c	1362
  15	[Fatal, 3]	2013-09-11 21:00:27	Controller ID: 0 Fatal firmware error of: line 1232 in... /... /RAID/1078dma.c	1361
  15	[Fatal, 3]	2013-09-11 21:00:27	Controller ID: 0 Fatal firmware error of: driver has detected possible FW, FW to stop blocking.	1360
  389	[Information, 0]	2013-09-11, 20:57:11	Controller ID: 0 host driver is loaded and operational	1359
  44	[Information, 0]	2013-09-11 20:56:33	Controller ID: 0 time established for power: time 2013-09-11 20:56:33 34 seconds	1358

  Windows 8.1 was delivered with the version of the downloadable 6.801.5.0 driver from Dell, I also tried and committed in my opinion the FW even hanging the question.

  I'm afraid - anyone know what is happening?

  See you soon

  Chris

  Appearantly this is related to the latest driver from Dell. I've found a workaround, but it's a bit complicated:

  1 connect a USB stick which is big enough

  2. install Wndows 8.1 on the * USB drive *.

  3. start Windows, and then remove the current driver and install the previous driver for Windows Server 2012.

  4. use the 3rd party software (say that Ghost) to copy the windows from USB drive to VD on Dell PERC H710P controller.

  5. start Windows in the USB drive again and use 'bcdedit' to clean boot stuff

  in any case, I'm LSI 9361-8i, so it won't be a problem for me in the future...

• cd/dvd missing after the replacement of hard disk and windows drive

  I have a laptop Lenovo I had to replace a hard drive, and Windows 7.  I've been able to do and got going, or so I thought.  I went to use the cd/dvd drive and nothing.  Looking at the Panel control does not show a d: / at all.  Device Manager shows a drive. (I think)  He said same drive works fine on the Properties screen.

  Any ideas on how to get it working or back?  Or should I go to ebay and get an external hard drive?

  Thank you, in advance, for any help.

  PJ

  Hello

  To isolate your concern about the CD/DVD player, is there an error message you get? Have you tried other CD or DVD?

  We also try to make the troubleshooting steps below on how to use the hardware and peripheral troubleshooting tool:

  1. Press the logo Windows + R to open the run dialog box.
  2. Control type in the run dialog box, and then press ENTER.
  3. In the Search box in Control Panel, type troubleshooting and then click Troubleshooting.
  4. Under the material and audio item, click Configure a device. If you are prompted to enter a password or provide confirmation, type the password or provide confirmation.

  If your problem is not resolved, please see this link for additional troubleshooting steps.

  Keep us updated.

  Kind regards.

• Error when you try to play audio files: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer where the file is stored

  Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect.

  I hope someone can help on Win 7 64 bit, music is taken on a disk usb2 external hard... I had no problem until today when the message in the title appeared next to each track, with a little red cross.

  I already deleted database library as suggested by some of the forums, also disabled the media as a feature of Win 7, rebooted and then re-enabled it.  I also disconnected externally and restarted that as well, I'm also the same mistake with a cd in the cd drive as well.

  Can anyone help?

  Hello

  This error may occur for one of the following reasons:
  The file is currently in use. Close the file and then try again.

  You are not allowed to access the location where the file is stored.

  Follow these steps to grant all permissions in the folder where the files are stored:
  1. right click on the folder on the external drive and click Properties.
  2. in the Properties window, click on Security tab.
  3. now, click Edit , and then click Add.
  4. now, type everyone in the box and click OK.
  5. check the full control box.
  6. click on apply and then click OK.

  You can also try the mentioned below as follows:

  1. click on start.
  2. go in Control Panel.
  3. Select "SOUND".
  4. double-click on speakers.
  5. click on the tab advanced and then uncheck the enable audio enhancements.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows does not start after the start menu after installing own home premium 7 on the Dell Inspiron Duo

  I did a clean install of windows 7 Home premium 64 on my dell inspiron duo 1090, returning 8.  This laptop does not have a disk drive or an Ethernet port.  I used Installer 64 bit of this Web site and the corresponding link.  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/can-i-revert-back-to-Windows-7-from-Windows-8/f8f5aaaa-8a18-4255-a6b2-5ecd6840d7ab

  It installed perfectly fine at first.  I was unaware of the proper order of pilot facilities and went first on the network drivers.  Designed for cordless operation and then use the updates automatic/driver finder.   After going on the dell site and download the drivers of network to a flashdrive from another computer, I then unpacked and used the setup.exe.  Now, when you try to restart the computer it perpetually loop screen Dell, the only options in F2 for Setup or F12 for boot options (the only option being the hard drive boot because there is no disk drive physical and nothing mounted on a virtual disk drive).

  Any help is appreciated and ask all the details that I left out.

  Thank you-

  I intend to use this laptop for school and Windows 7 is required for course work.

  Perform the following steps:

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the DVD of Windows 7 disc or a USB flash drive that you created, and launch the installation.

  After you have entered the user name and password that you will be asked:
  "Type your Windows product key", do not enter a key.
  Also located just below the box where you enter the key is a box with a check mark
  to "Automatically activate Windows when I'm online", remove the check box and click "next".

  You now have a 30-day grace period to activate Windows.

  During the grace period, you can install your device drivers,
  run Windows updates and solve other problems or issues.
  Once you are satisfied everything is working properly, and then activate Windows.

  ====================== Device Drivers ===============================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then download to a folder on your hard drive and install all, beginning with the card mother/chipset drivers, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = Run Windows Update =.

  Install the 'Important' updates that are available.

  Make a small group (10 updates to max at a time) of the updates at a time,
  reboot if prompted and install another small group of updates and so on.
  registration of .NET Framework updates for the end.

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  J W Stuart: http://www.pagestart.com

• This copy of windows is not genuine after the replacement hard drive and recovery system

  I was running factory installed windows 7 Home premium in my laptop hp pavilion dv6 6119tx. Due to hard drive crash I replaced with new HARD drive.  Previously, I did system image backup using easeus todo backup and recovery softeware. After system recovery with the same software, this massage flasehes "this copy of windows is not genuine". I tried to enter the key of product at the back of the laptop but it says invalid.
  I ran diagnstic windows validation tool. him as a result is below.

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: invalid license
  Validation code: 50

  Code of Validation caching: 0xc004c4ab
  Windows product key: *-* - 73CQT - WMF7J-3Q6C9
  Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
  Windows product ID: 00359-OEM-8992687-00010
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {CA180260-1211-48DB-834C-4805A4594053} (1)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.111118 - 2330
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {CA180260-1211-48DB-834C-4805A4594053}1.9.0019.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-1883088055-1570218021-1659234768Hewlett-PackardHP Pavilion dv6 Notebook PCHewlett-PackardF.1B20111005000000.000000 + 0002BFD3F07018400FE40090409India Standard Time(GMT+05:30)03DELL QA09 100100Microsoft Office Enterprise 2007126DF6616C522F5867l28mQpHyGN4/v7tLnJzLV + ZnKQ = 89388-707-5082974-6591914

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800010-02-16393-7601.0000-0552012
  Installation ID: 010735456091822376148725581093255175938323439855115461
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 3Q6C9
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 1
  Trust time: 10/07/2012 10:49:07

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4AB
  Beyond: PASS
  Event timestamp: 10:7:2012 10:46
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current HWID of Hash: OAAAAAEAAQABAAIAAAAGAAAAAgABAAEA6GGaTIaqGKMieFCbUkhwn9QjphiojRKp0gzcQQzDLnM =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HP APIC INSYDE
  HPQOEM FACP SLIC-MPC
  HPET HP INSYDE
  START HP INSYDE
  MCFG HP INSYDE
  ASF!            HP INSYDE
  QA09 DELL SLIC
  SSDT HP INSYDE
  ASPT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE

  Help, please

  Code of Validation caching: 0xc004c4ab

  
  
  Windows has detected the presence of a feat of activation as evidenced by the presence of a table of slic of Dell on a HP computer.
  You need to install windows genuine.