demonstration of vision or new database?

Similar Questions

• create the new database programmatically

  I am creating a new MS Access database you want to connect a few results for in a labview program using the toolkit of connectivity datab ase.  The examples show how link and create a new table in an existing database file, but I want to create a new database and then insert a new table inside for my results.  Any ideas?

  You have installed Access where you can create a blank MDB file?  If so, you can create an and store it as a template in your program folder.  Copy and paste when you run your routine and use table VI to create in the Toolbox to create tables to write.  It is possible to create tables in an INSERT, but you can't control the properties of the fields.  The OP in this thread is doing this thing. (http://forums.ni.com/t5/LabVIEW/Database-connectivity-toolkit/m-p/3046359#M868188)

• Cannot add new database in OEM 11 GR 2

  Hi all

  I was done db refresh a server (server1) to another server (Server 2). Once again, db refresh from server2 to server1. I've been dropped in server1 database, but did not fall in OEM. I want to configure the new database again to the server 1 but not configured even if I can't drop it is the database.

  OS: Solaris

  Oracle Version: 11 GR 2

  Please can someone help me.

  Thank you and best regards,

  SIVAKUMAR. V

  9176956667

  Not sure if I myself fully to your problem.

  It seems you have dropped your database on server1, but did not withdraw its control db objects - so you're in some kind of undefined state (EM think there is a db, which is not true).

  To remove control of db objects, see https://docs.oracle.com/cd/E18283_01/server.112/e17120/dbcontrol005.htm

• E.M.P. 11.1.2.1 repointing to the new database

  Hi all;

  Need of your advice here;

  I had a requirement for re-pointer the EPM environment to the other (new) database. I just want to share my point of view how this can be done please correct me if I'm wrong.

  (1) the relational database of the former backup

  (2) backup the \Oracle\Middleware\ file of all servers in the EMP

  (3) the registry backup

  4) clone or COPY all schemas (HFM, planning, Essbase, FDM.. etc) to the database

  Then

  (4) remove the respective environmental USER_PROJECTS folders

  5) RUN the CONFIGURATION TOOL and then provide the NEW database server and port details. Update the TNSNAMES.ora file with the new database.

  (6) repeat step 5 for all other components

  OR

  Is there a way we can change the PROPERTIES file with the Reconfiguration pointing to the new database of execution? Please notify.

  Thank you

  UB.

  Yes you must reconfigure on these servers, but it is only shared services registry which needs configuration to point to the new database, Essbase uses the information updated in reg.properties.

  Try it and see.

  See you soon

  John

• How can I create a new database without table using database configuration

  How can I create a new database without table using database configuration

  You can search for your "DBA 2 days" version oracle documentation for your version.  You should also read the manual of the concepts.  Create your own schema is pretty basic, all you have to do is to create a user.  Don't use dba or system for your own objects.

• Creation of a new database server

  Hi all

  I am new on ODI and is currently in the learning phase. I have a question about creating new data server.

  I did the below mentioned steps

  (1) created a new database server by providing the connection user name and password.

  Question 1: I gave the user name and password that the scheme I want to connect. Is this correct?

  (2) right click on the new database server and create a new physical schema. Here for the scheme and the scheme of work, I see the pattern in my database.

  Question 2: Why all the patterns is part of the schema and the schema of work drop-down list? Would it not be limited to the diagram provided in step 1.

  Thanks in advance

  Hi Matt,

  Here's a blog that I wrote a few weeks ago that should help you understand the topology: http://www.rittmanmead.com/2014/12/data-integration-tips-one-data-server/

  It will be useful.

  Kind regards

  JeromeFr

• ODI - reconfigure to new database server

  Hello

  We had to move the database from Solaris to Linux server. As a result, changed the name of the server and the old databases are stopped. Repositories of master and work have been migrated to the new database server.

  Is this enough to update odiparams, agentcreate.properties and change the connection details by connecting to ODI to update the names of servers? I also used opmn to run ODI as a windows service. version 11.1.1.6

  Kind regards

  Brig.

  No. I wouldn't do that.

  Repositories of masters and work are on the same server. I hope that the update of odiparams, of agentcreate.properties and modify connection details, by connecting to ODI ODI would point to the new database repositories.

  Kind regards

  Brig.

• Add the new database

  I have a 2 rac cluster

  rac1 server with 2 network cards

  eth0, eth1

  rac2 server with 2 network cards

  eth0, eth1

  We have completed the installation of rac cluster

  the database is rac

  Now the manager who comes to me and says

  I want you use the environment above and create another database QA

  of course I can easily create a single instance of QA Manager

  said... I want allows you to create a car QA database

  How do I do this with the same material?

  Imagine the size of the data set is 20 GB and data used are 10 GB

  the sys admin says if you want it can create discs more than necessary.

  How to use two servers to create another data base rac called QA

  I can't go to the Manager and say... BUY a material more

  What are the minimum requirements and that is the necessary steps.

  Of course I don't want detailed step by step guide

  just a preview...

  You can use dbca (Database Configuration Wizard) to create multiple databases in the same installation of RAC cluster.

  But first think how big disks (data, Redo, Arch) (grid Infra (clusterware) disc can be same for all databases) you need this new database and add these new drives for servers and ASM if you use.

  And then create a new database with dbca.

• (DBUA) New database upgrade 10.2.0.4 to 11.2.0.3 adconfig fails

  OS: OEL5x86

  DB: 11.2.0.3

  Nice day

  I am creating the environment for my new database being upgraded, but I get an error message...

  /Ora/Oracle/proddb/11.2.0/appsutil/install/PROD_mobay/adcrobj.sh and /ora/oracle/proddb/11.2.0/appsutil/install/PROD_mobay/txkcreateACL.sh

  neglected later telling me the same error ORA-12705: cannot access NLS data or invalid environment specified files.

  -from journal autoconfig-

  Profile of AutoConfig Phase

  Current profile process 1 of 1 for AppsUtil

  The execution of script in InstantiateFile:

  /Ora/Oracle/proddb/11.2.0/appsutil/install/PROD_mobay/afdbprf.sh

  script gave:

  ****************************************************

  afdbprf.sh started Thu Jan 23 12:14:45 EST 2014

  The environment settings are...

  ORACLE_HOME: /ora/oracle/proddb/11.2.0

  ORACLE_SID: PROD

  PATH : /ora/oracle/proddb/11.2.0/perl/bin:/ora/oracle/proddb/11.2.0/bin:/ora/oracle/proddb/11.2.0/perl/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:.

  Library path: /ora/oracle/proddb/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/ora/oracle/proddb/11.2.0/ctx/lib

  Executable: /ora/oracle/proddb/11.2.0/bin/sqlplus

  SQL * more: Production of liberation 11.2.0.3.0 Thu Jan 23 12:14:45 2014

  Copyright (c) 1982, 2011, Oracle.  All rights reserved.

  Enter the value 1: enter the value 2: enter the value 3: ERROR:

  ORA-12705: cannot access files of NLS data or invalid environment specified

  ERRORCODE = 1 ERRORCODE_END

  .end std out.

  .end err out.

  Any Suggestions?

  Kind regards

  Shridath.

  Please see:

  AutoConfig is a failure with status 4 to a new database with NLS environment error ORA-12705 (Doc ID 1612017.1)

  DatabaseTier Autoconfig errors ORA-12705: cannot access NLS files or invalid environment specified (Doc ID 548916.1)

  AutoConfig is a failure with status 4 to a new database with NLS environment error ORA-12705 (Doc ID 1612017.1)

  Thank you

  Hussein

• How performance measurement/reference of a new database on the new server?

  Hello

  I have two servers oracle with following (same) details:

  5.8 64-bit RHEL

  Oracle 10 g 2-10.2.0.5.8

  ASM 10 gr 2-10.2.0.5.8

  Server A: 32 GB of RAM, 8 processors @ 3 .00GHz

  Server b: 128 GB RAM, vCPUs 16 cores

  A server (physical server) already has a database of A. ServerB (VMware - Yes, my client moves all Oracle on VMware servers for some reason any) is a new installation and the new database B with exact same init params as A databas. I expdp data from database A and impdp in database B.

  According to the material, the material is better than the old server B. I made a very simple test to check if the new DB performs better than the one on the physical server. Here are the results:

  I ran a simple query to create a new table. The original table (say, table_a) contains 1.7 million lines and the size is 2.2 GB.

  create table test1

  as

  s elect * from table_a;

  It took 3:28mins on database B, it took 1:55mins only on A database. So, it seems that the new database B scene poor (apparently). Then I looked at the plan of the explain command (don't know if it means a lot, because it s a very simple query) and here's these two databases:

  A (physical server databases

  Plan
  SELECT STATEMENT ALL_ROWS Cost: 14 052 bytes: 2,161,302,003 cardinality: 16,250,391
  	1 FULL TABLE ACCESS TABLE table_a Cost: 14 052 bytes: 2,161,302,003 cardinality: 16,250,391

  Database B (virtual server)

  Plan
  SELECT STATEMENT ALL_ROWS Cost: 59 844 bytes: 2,161,302,003 cardinality: 16,250,391
  	1 FULL TABLE ACCESS TABLE table_a

  
  Cost: 59 844 bytes: 2,161,302,003 cardinality: 16,250,391

  Issues related to the:

  1. Why is the cost different? Should I "calculate statistics" on the B (virtual server) database?

  2. how to pursue the investigation and discover the reason for the difference in time?

  3. what other test can I run to make sure that I have the right database Setup?

  Don't know if it of just enough info - if not, please let me know what else I need to provide.

  The team I perform hands on this server refuses to accept it by saying that it is slower than the existing one.

  Please advise!

  Best regards

  
  

  Looks like you'd get only a few percentages of increase in performance by increasing the pga, while the downturn is probably elsewhere.  Follow Nikolay, Ed and John suggestions.  STATSPACK or AWR can also give clues to e/s, although it would be a mistake to expect them to reflect the performance of the production - but they might highlight if you have problems logwriter or something.    Don't know if I even have to mention My ISP4400: numbers of ORION

• Server with a database and an installed network agent... Add a new database

  First of all, sorry for my English.
  I have a server with Oracle 10.2.0.4, where there was already an agent of the grid control and a database. Now, we have created a new database on the same server. What I do to make this new database is displayed in the grid control?
  
  Best regards
  Vitor Jr

  Did you do the following?

  agentca -d -c "hostname1,hostname2,hostname3"
  

  Change - read your bad output... exceed the correct host names. You may need to use the full host name IE hostname1.tpn.cliente.com as in your output... Try and see.

  Published by: Freddie Essex on April 24, 2013 16:56

• Installation of VirtualCenter migration with the new database

  I have an existing installation of Virtual Center and sql server that was installed by an employee of the past. The installation needs cleaning and migration.

  So I decided to prepare a new physical server to host a new installation of VirtualCenter and another SQL Server. I installed VirtualCenter, and the database was created. But now I'm starting to think that she can't be as easy as adding ESX hosts to the installartion of Vcenter new/database and update the IP of the server for the hearbeat.

  So I have a few questions:

  (1) if I disconnect the old installation of VirtualCenter and ESX hosts, add them to the new facility, my storage adapters will remain intact?

  (2) I'll currupt one of my virtual machines on ESX host?

  If I can lose data, I'll obviously have to migrate the existing database, rather than nine.

  You can unplug and remove the hosts of their current instance of vCenter and then add the host in the new.  Don't hurt your VM.  You do not also lose connection also well to the storage fabric.

  Just keep in mind that moving to a new instance of vCenter will lose you all the performance and historical data as well as any rules DRS/HA, pools of resources, permissions, roles, etc.

• ICP-02002, create a new database connection

  I'm multiplex a new database connection in my JDEv application.
  All right, but when I try to record (with Save password verified) I get the following error and the configuration.xml file is not updated.
  June 15, 2011 15:47:46 oracle.security.jps.internal.credstore.ssp.CsfWalletManager openWallet
  ATTENTION: Portfolio based store of credentials failed. Reason for java.io.IOException: ICP-02002: could not open the wallet. Check the password.
  June 15, 2011 15:47:46 oracle.jdevimpl.db.DefaultEditor launchEditor
  WARNING: Could not save connection: cannot save the database connections: oracle.security.jps.service.credstore.CredStoreException: JPS-01050: portfolio based store of credentials failed. Reason for java.io.IOException: ICP-02002: could not open the wallet. Check the password.
  
  What is the problem?
  TKS
  Tullio

  tullio0106 wrote:
  ... fsrc/META-INF directory is in the same directory of the workspace and not in any project.

  That's right, in the workspace to the src/META-INF (not fsrc/META-INF).

  The file is binary and should not be opened/saved with any editor. Try to remove and reconfigure the connection in JDeveloper. Save the password so that it is recreated.

  Hope it works.

• How to reconnect the new database with oracle and oracle mid infrastructure

  course oracle environment;
  Database; 10gr 2 (10.2.0.1) old-SID: gtxprod host: 10.30.100.199
  new database; 10gr 2 (10.2.0.1) - SID: gtxprod2 host: 10.40.110.199
  application sever. 10.2.0.1 (oracle mid level.) and oracle infra SSO, forms, reports, portal.
  
  problem;
  I try to reconnect from the application to the new database server. I do not know how?
  
  I went to /opt/oracle/10ggtxinf/network/admin/tnsnames.ora

  # tnsnames.ora Network Configuration File: /opt/oracle/10gasr2inf/network/admin/tnsnames.ora
  # Generated by Oracle configuration tools.
  
  asdb.gtx.com =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = isdev.gtx.com)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME =asdb.gtx.com)
      )
    )
  
  
  gtxprod.gtx.com =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = gtxprod.gtx.com)(PORT = 1521))
      )
      (CONNECT_DATA =
        (SID = gtxprod)
      )
    )
  
  gtxprod2.gtx.com =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = gtxprod2.gtx.com)(PORT = 1521))
      )
      (CONNECT_DATA =
        (SID = gtxprod2)
      )
    )

  In application of the oracle infra. How Asian Bank of development of database instance can connected with the new data base gtxprod2?
  
  In Forms Server, based on a Web site, if go to Forms Server, I can see tns.ora but I can't see anything to update to the new database.
  
  you could give me information how understand this problem?
  
  Thank you very much in advance

  Hi Wen,

  As you have created a new database 'gtxprod2' so the Stanley database should be in place
  cmd--> lsnrctl status
  That you have even made changes to 10ggtxinf/network/admin/tnsnames.ora
  do the same entry in the oraclebi/network/admin/tnsname.ora file

  You can check if your new entry is rite of
  tnsping gtxprod2 (>)
  Now you ask how the application will come to know what database to point to
  Go to oracle AS
  As using your forms and reports go to oraclebi/forms/server/formsweb.cfg

  At the end of the file, there might be a few entries
  for example
  [test]
  envFile = test.env
  Form = LOGIN_ENT.fmx
  LookAndFeel = oracle
  separateFrame = true
  UserID=nrs_fd/nrs_fd@fixdep
  SplashScreen = NO
  logo = NO
  Background = No.
  color = auto
  make = yes
  Archive = frmall.jar
  archive_jini = frmall_jinit.jar, frmwebutil.jar, Jacob.jar, icons.jar
  ImageBase codebase =
  term = frmpcweb.res
  baseHTML = webutilbase.htm
  baseHTMLjinitiator = webutiljini.htm
  baseHTMLjpi = webutiljpi.htm
  WebUtilArchive = frmwebutil.jar, jacob.jar

  "userid=nrs_fd/nrs_fd@fixdep" IE (username) / (password) @tnsname
  the following entry specifies what database, the application must point to

  If your using a war file, you must create a data source and as datasource, you must specify the tnsname input

  Concerning
  Fabian

• Adding a new database on two RAC nodes

  Hi, all.
  
  We have a 11.1.0.7.0 database running on the RAC environment two nodes. We would like to create another database on the same two nodes RAC. We use RHEL 5.
  
  Please tell me an Oracle installation document that can guide me in installing. I would appreciate any advice. Thank you!

  This does not resemble the proper document for me.

  He treats
  -extend a cluster
  -adding new instances of an existing database.

  Your situation is
  -the cluster is ok and will not be extended
  -You must create a new database.

  This chapter http://cs.felk.cvut.cz/10gr2/install.102/b14203/dbcacrea.htm#sthref1084
  This scenario discusses.

  I hope this helps.

  -----------------
  Sybrand Bakker
  Senior Oracle DBA