Installation of VirtualCenter migration with the new database
I have an existing installation of Virtual Center and sql server that was installed by an employee of the past. The installation needs cleaning and migration.
So I decided to prepare a new physical server to host a new installation of VirtualCenter and another SQL Server. I installed VirtualCenter, and the database was created. But now I'm starting to think that she can't be as easy as adding ESX hosts to the installartion of Vcenter new/database and update the IP of the server for the hearbeat.
So I have a few questions:
(1) if I disconnect the old installation of VirtualCenter and ESX hosts, add them to the new facility, my storage adapters will remain intact?
(2) I'll currupt one of my virtual machines on ESX host?
If I can lose data, I'll obviously have to migrate the existing database, rather than nine.
You can unplug and remove the hosts of their current instance of vCenter and then add the host in the new. Don't hurt your VM. You do not also lose connection also well to the storage fabric.
Just keep in mind that moving to a new instance of vCenter will lose you all the performance and historical data as well as any rules DRS/HA, pools of resources, permissions, roles, etc.
Tags: VMware
Similar Questions
-
Installing Vcenter new server with the new database
Hello
We currently have the virtual Center 2.5 with SQL express back-end and we are planning to upgrade to vcenter server with Oracle backend. My original plan was to start over by installing vcenter on a temporary server with Oracle and eventually return the current server vcenter and use the same Oracle server. What would be the simplest solution for this? Essentially, in the end, we need to use the current server to vcenter but move from the db to the Oracle database. Our group consists of 3 servers and only active DRS at present (HA disabled for this upgrade). Can I upgrade the current virtual Center vcenter server directly and do fresh install for the Oracle database?
Thank you
I would also install a new server vCenter thr.
After that, make a new configuration and Noor and if everything works correctly, uninstall the old und VC 2.5 check also the HA!
Good luck!
-
Dear Sir
Migrated domain users are needed to access shared folders on the network with AD username old or need to share with the new AD IDI am in a field & I'll migrate with a domain name.EX: now I'm in the field of the AAA tomorrow my domain name will change to BBB. User accounts are created in two AAA & BBB and the two domain user IDs are different.data servers are also migrating with the new domain.is it possible to access share with the old user id folder in new field or both to share the files again with the new user ID Active directory.Kind regardsChauvet J.Hello
The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
E.M.P. 11.1.2.1 repointing to the new database
Hi all;
Need of your advice here;
I had a requirement for re-pointer the EPM environment to the other (new) database. I just want to share my point of view how this can be done please correct me if I'm wrong.
(1) the relational database of the former backup
(2) backup the \Oracle\Middleware\ file of all servers in the EMP
(3) the registry backup
4) clone or COPY all schemas (HFM, planning, Essbase, FDM.. etc) to the database
Then
(4) remove the respective environmental USER_PROJECTS folders
5) RUN the CONFIGURATION TOOL and then provide the NEW database server and port details. Update the TNSNAMES.ora file with the new database.
(6) repeat step 5 for all other components
OR
Is there a way we can change the PROPERTIES file with the Reconfiguration pointing to the new database of execution? Please notify.
Thank you
UB.
Yes you must reconfigure on these servers, but it is only shared services registry which needs configuration to point to the new database, Essbase uses the information updated in reg.properties.
Try it and see.
See you soon
John
-
upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP
I plan to upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP
my PC configuration is like below:
Card mother Intel DH61WW
Processor Core I3 2100 3.1 Ghz
4 GB OF DDR3 RAM
Seagate 1 TB SATA HARD drive
OS: Microsoft Windows XP Professional SP3I run Windows 7 upgrade advisor in which some results below the incompatibilities:
Intel (r) 6 Series / C200 Series Chipset Family SMBus Controller - 1 22
Unknown Intel we have not the compatibility information about this device.
Intel 82579V Gigabit Network Connection
Unknown Intel we have not the compatibility information about this device.
Realtek High Definition Audio
Realtek unknown we have not the compatibility information about this device.Here's my conceerns:
What needs to be done to overcome the problems of incompatibility?
Do I need to download new software files compatible for windows 7 and then install
for example VLC media player, Skype, MySQL Server I am running
or currently existing files are compatible to install with Windows 7?Would I be able to upgrade to windows 7 without any problem and safely?
Could you please help me with the questions above?
Please correct me with additional suggetions that I may have missed with.
Looking forward to hear from you
Thank you
You understand that you will not be able to upgrade Windows XP to Windows 7? He will have to do a clean install.
The Council supports Windows 7, you can get the drivers here (the chipset drivers should be the first drivers you install after installing the operating system.)
John
-
Hello, I have Norton antivirus and apparently everything is installed correctly but when I click the icon on the desktop after a very short time, the message appears. I have an Acer Aspire V3 windows 8.1 - 64 bit
I am trying to solve this problem since last week. No change at all. (I uninstalled all the components of the front range of HP printers) The printer I have is HP C6250 all-in-one.
I followed all the steps in the HP website and a couple of nights, it seemed that everything was working, when I prayed me to turn on the printer, one of the color ink cartridges more than ink and I could not finish the job. With the new cartridge is already installed, I can't retrieve the set to the top of page to complete the installation.
I thank very you much.
Unless you have installed the full software from HP support features, none of the options on the cartridges of ink or HP Diagnostics will work
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=3308554
And if you bought "compatible" ink cartridges and not genuine HP that you receive msgs error cartridge like the habit of these cartridges compatible function with the HP software
-
How to reconnect the new database with oracle and oracle mid infrastructure
course oracle environment;
Database; 10gr 2 (10.2.0.1) old-SID: gtxprod host: 10.30.100.199
new database; 10gr 2 (10.2.0.1) - SID: gtxprod2 host: 10.40.110.199
application sever. 10.2.0.1 (oracle mid level.) and oracle infra SSO, forms, reports, portal.
problem;
I try to reconnect from the application to the new database server. I do not know how?
I went to /opt/oracle/10ggtxinf/network/admin/tnsnames.ora
In application of the oracle infra. How Asian Bank of development of database instance can connected with the new data base gtxprod2?# tnsnames.ora Network Configuration File: /opt/oracle/10gasr2inf/network/admin/tnsnames.ora # Generated by Oracle configuration tools. asdb.gtx.com = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = isdev.gtx.com)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME =asdb.gtx.com) ) ) gtxprod.gtx.com = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = gtxprod.gtx.com)(PORT = 1521)) ) (CONNECT_DATA = (SID = gtxprod) ) ) gtxprod2.gtx.com = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = gtxprod2.gtx.com)(PORT = 1521)) ) (CONNECT_DATA = (SID = gtxprod2) ) )
In Forms Server, based on a Web site, if go to Forms Server, I can see tns.ora but I can't see anything to update to the new database.
you could give me information how understand this problem?
Thank you very much in advanceHi Wen,
As you have created a new database 'gtxprod2' so the Stanley database should be in place
cmd--> lsnrctl status
That you have even made changes to 10ggtxinf/network/admin/tnsnames.ora
do the same entry in the oraclebi/network/admin/tnsname.ora fileYou can check if your new entry is rite of
tnsping gtxprod2 (>)
Now you ask how the application will come to know what database to point to
Go to oracle AS
As using your forms and reports go to oraclebi/forms/server/formsweb.cfgAt the end of the file, there might be a few entries
for example
[test]
envFile = test.env
Form = LOGIN_ENT.fmx
LookAndFeel = oracle
separateFrame = true
UserID=nrs_fd/nrs_fd@fixdep
SplashScreen = NO
logo = NO
Background = No.
color = auto
make = yes
Archive = frmall.jar
archive_jini = frmall_jinit.jar, frmwebutil.jar, Jacob.jar, icons.jar
ImageBase codebase =
term = frmpcweb.res
baseHTML = webutilbase.htm
baseHTMLjinitiator = webutiljini.htm
baseHTMLjpi = webutiljpi.htm
WebUtilArchive = frmwebutil.jar, jacob.jar"userid=nrs_fd/nrs_fd@fixdep" IE (username) / (password) @tnsname
the following entry specifies what database, the application must point toIf your using a war file, you must create a data source and as datasource, you must specify the tnsname input
Concerning
Fabian -
How do I add the new database to RAC 10 g 1
Hello, guys!
I'll migrage RAC 2 - nodes to a new hardware (virtual machine is), but I don't know how to do this.
Guys, please, can you me the migration steps?
I was thinking about this:
(1) I install clusterware on 2 new nodes.
(2) restore database backup rman (production system)
(3) is not sure how to register restored the database on the new cluster
Thanks in advance.
You must first reconfigure init.ora (for all instances) with the new configuration, as remote_listener local_listener, instance_number cluster_database...
After that, you must save the database and everything what you bodies
srvctl add database d
o Pei srvctl add instance d
-i - n srvctl add instance d
-i - n HTH - Antonio NAVARRO
-
Install RAC 11 GR 2 and apply the patches with the new Option of software updates YES
Anyone tried the installation with the new Option of software updates?
I'm going to install grid RAC 11 GR 2 and I intend to do the following steps:
(1) install the Oracle Grid Infrastructure 11.2.0.2 patch group
(2) make all configurations with YES
(3) create ASM disks
(4) install Oracle Database 11.2.0.2 software only
(5) apply recommended patches 11.2.0.2.2 Oracle (12311357) and 12431716. (Ref. MOS doc [756671.1 ID])
(6) create the RAC (advanced option) with DBCA database
With these steps:
Grid and ASM disks would be configured without the recommended patches, but the database will be created with applied patches.
I would not do a "Software only" install IM and then apply the patches because later I would have to manually do all the configuration steps.
If I use the Option of YES software updates to apply patches, YES makes the adjustment, and then I would set up the GRID with YES?
Quote from Oracle® Setup Guide Network Infrastructure 11 g Release 2 (11.2) for Linux - E17212 number of part-11:
'Use the feature of dynamic download and apply software upgrades of software updates as part of the installation of the Oracle database. You can also download updates separately using the downloadUpdates option and later to apply during installation by providing the location where updates. »
I could not find more detailed information on this feature in the documentation and MOS.
Thank youHello
You can download the latest updates and patches to help with option - downloadUpdates
./runInstaller -downloadUpdates
You can use this note:
* How to download the latest updates and patches using 11.2.0.2 YES [ID 1295074.1] *.
Don't miss...
* Error: INS-20704 while installation 11.2.0.2 with Option 'use downloaded software updates' [1265270.1 ID] *.
: Note ensure that the user download the updates of patches have own/correct permission to download updates to patch to MOS (My Oracle Support).
Do not use the directories/tmp/oraInstall * for the download location. New bug 9975999Documentation explaining...
4.5.1 running Oracle Universal Installer
Download of updates before Installation
http://download.Oracle.com/docs/CD/E11882_01/install.112/e16763/inst_task.htm#BABJGGJHKind regards
Levi Pereira -
Problems with the new w standby servers / db different characterset?
Currently, the existing system is incorrectly configured with bad characters, we will migrate to the new servers. can put us in place a Data Guard configuration, where the news of the day before is built with the correct character set?
Published by: PeteORA16xxx on March 29, 2011 08:31If you want to change the character set, it would be something like this:
Guess Oracle 11
Select * from nls_database_parameters;
Run the utility CSSCAN.
If TI errors because it is not installed, install it using this script: (your path may vary)
U01/app/Oracle/product/11.2.0/RDBMS/Admin/csminst. SQL
Run the utility CSSCAN
and take 1) comprehensive database
It should invite you to new and existing database character set.
After he finishs
SHUTDOWN IMMEDIATE
START TO RESTRICT
Run the csalter.plb script
U01/app/Oracle/product/11.2.0/RDBMS/Admin/csalter. PLB (once again your path may vary)
This will update the contents of the Oracle data dictionary.
After he finishs
SHUTDOWN IMMEDIATE
STARTUP
Finally, check the current character set.
Select * from nls_database_parameters where parameter = "NLS_CHARACTERSET";
If the choice I would rebuild the primary on the new server with the new character set. If you don't have this option and test often. You new servers give you the possibility to duplicate your primary current and test this situation without risk. If you make your backups on your primary now and that trashes the day before you can consider having a RMAN duplicate for standby in hand plan. If you happen to use the same directory on both servers here structure is a simple plan of RMAN duplicate:
http://www.Visi.com/~mseberg/duprman.html
I would test heavy. I never trust character sets, but to be honest, they got better. In theory, this should work and just move forward, but I've never had to do.
I hope you post your experience.
Best regards
mseberg
-
Problem with the new RPD file OBIEE 11g deployment
I'm working on a recent ' 30/09/2010' installation of OBIEE 11 g on a platform of Windows 32 - bit, with an instance of Oracle 11 for MDS database.
I created a new RPD with the new admin tool and use Enterprise Manager to deploy (upload) and activate the changes. Just to be on the safe side, I also restarted everything.
Now, "things are breaking" the service bimiddleware is showing a 'red' arrow down, bipublisher is also declining.
Any attempt to connect to the analytical application (with valid credentials) fails with an authentication error.
Looking through the log file I find this entry:
"[13026] error getting roles FMW: ' [nQSError: 46164] HTTP server returned the error 404 (not found)" to URL. ""
Can someone tell me what could go wrong?
Thank you
Richard BrooksHow about making them even then?
-
Problems with the new Macbook pro 15' maxed out
Here's a quick post about my experience so far with the new macbook pro. I just got a brand new fully maxed out in spec macbook pro 15 inch 1 to SSD 16 GB RAM AMD R9 370 m GPU (set to automatic switching is not always) and a 2.8 to 4 GHz i7. I turned on and set it up which was nice and took 2 minutes. Then experience decreased a little when I saw an EST 05:36 hours of battery life remaining to 94%. So I loaded 100% and it is still 60% of battery life announced and no program running that I literally just signed a brand new machine.
Then I tried to use the migration wizard to import a backup of my iMac 5 k so I can do everything on this clone for my laptop. After having successfully connected (he told me if my password for time machine was incorrect or not) it froze and did nothing, continue did nothing.
Then place had to call support, was a guy on the phone in 30 seconds and I unplug and restart the machine time, always that same question so I transferred to a guy with "more training". The new guy I could say knew a little more and knew that I knew how to set my password or if I walked in their properly for a bit but they all have been set for the same password just for this. I created a second admin account called "test" under his leadership, and when the migration assist froze on this account, he was surprised and proceeded to transfer me off.
I preceded to restore fully the machine into thinking that my account setup is causing trouble with the migration assistant, and it turns out that the closure of that laptop it can only continue to 'download additional components', while that connected for 30 minutes so all last night was wasted, and now I guess he's got 5 left 12 hours to download original 'things '. Keep in mind that I can download 5 GB in one hour... After he wake up this morning and ending up where I left it last night :/ he says 84 hours go, now 72 and 51 and it is not updated even once in seconds, it took 20 minutes to 84 minutes to 51, it's literally a day 2 reset extravagance or what? Just to download it I can only imagine the actual plant until I can install my programs.
The cost of the laptop was about $3600 but paid ~ $2900 after headphones were included and $250 off for delivery to students and other issues on the agenda of the process itself that is not my complaint, what happens, but sitting with a new camera and support useless just to ask me if I can use actually tomorrow at this price are unacceptable.
I would like to continue using it for a while.
You can try to reset the SMC http://support.apple.com/kb/ht3964
-
I checked with the developer of the extension sites, but they do not yet report if the extension has been tested with Firefox 6.0. 3.6-4.0 switch left me with a gap in functionality of my extensions, although the switch of 4.0 to 5.0 went smoothly. I remember that the installer for 4.0 tested my extensions for compatibility before asking me to confirm if I wanted to install. 6.0, however, says he is already downloaded and just waiting for me to restart Firefox. Mozilla seems to be getting less polite and more aggressive on updates.
When Firefox starts to install the updated version, it shows you the Add-ons that won't be Compatible with the new Firefox version that is being installed. You can cancel the Installation at this stage.
I'm not sure about this, but you can also use - Add-on Compatibility Reporter 0.8.7
Check and tell if its working.
-
Installation of operating system after the new motherboard
My venus of HP with partitioned OS reinstall. If I get a new case and motherboard, will reinstall it still work or is it exclusive like Dell / is as with their installation disks? My motherboard doesn't work with the new 700 series video cards, so I have to replace the MB if I want to use the video card on that I just spent $ 300. Thank you
My PC...
H8 1280 t w/600w PSU
Link... http://support.HP.com/us-en/document/c03189539
You are the very welcome.
The recovery disc for your model will not work on a different model motherboard.
They are only designed to run on the original motherboard with the PC came.
If you were to try using them, they will report and error and the installation will leave.
-
Satellite L655-149: recovery does not work with the new HARD drive
Satellite L655-149
PSK1JE
Windows 7 Home Premium 64-bit (factory installed)
Recovery of HARD drive on drive D (factory installed)
My old toshiba (MK5065GSX) 500 GB hard drive became too noisy and slow so I plan to replace it with the new drive hard toshiba (MK5059GSXP) 500 GB.
I created USB Flash HARD drive recovery.
When the installation is complete and Setup installs devices an error "Windows Setup couldn't configure windows to run on a hardware on this computer.I've updated the bios
I loaded by default in the bios
I changed the SATA AHCI mode to compatibility IDLEassistance in this regard will be highly appreciated
Set the BIOS to the default settings and try again.
With the installation of recovery, there is a problem: either it works or not. If this isn't the case, bad luck and the only solution for you is to order original Toshiba recovery DVD on https://backupmedia.toshiba.eu/landing.aspx
By the way: do you use that stick of recovery for the first time?
Maybe you are looking for
-
ChnListBox... of another PDM file
Hello world I would like to draw a waveform channel, given any string value x and value any channel there, I selected in a dialog box. It's pretty easy if both channels are owned by the same PDM file, as you can see in the code below (works on my com
-
Thought I had a virus - running SLOW
Running XP home. I thought I had a virus/spy/badly. Tried to open Add / Remove programs and it won't fill. Tried to start > run > regsvr32 appwiz.cpl and got the Dll RegisterServer in appwiz.cpl succeeded. Still not filling. Tried to HKEY_LOCAL_MACHI
-
How can I get my code product because the computer if I lost the label containing the code of the product, y at - it produces free software to find the code of my computer. Need help as soon as possible. TQ.
-
HP Pavilion DV6500: upgrading the BIOS on HP DV6500 w/Win7-64
HP Pavilion DV6500 Service etiquette: dv6607rs Memory: 2 GB to 4 GB upgrade Operating system: Win7 Ultimate 64-bit HD: upgrading to the new Toshiba 1 TB HDD - MQ01ABD100 OLD HD: Western Digital WD1600BEVS - 60RST0 CPU: upgrading to AMD Turion64 X 2 T
-
where can I get a copy of the dolby home theater 7 windows
where can I get a copy of Dolby home theater windows 7