Deploy the Web service client application

Similar Questions

• Deploy the web service on ARM processor

  Is it possible to deploy a web service on an ARM processor with LabVIEW ARM module?  If this is not the case, a web server for an ARM processor has been done in before LabVIEW?  Is there an example of code out there?  Thank you.

  skryger,

  From LabVIEW for ARM 2009, there is no way pre-constructed to deploy a web service on an ARM processor.  (The only options in accordance with the specifications of construction are Application, Source Distribution and the Zip file.)  Of course, who does not eliminate the possibility of building one yourself.  Maybe someone from the community can develop more if this was done.

  Kevin S.

  Technical sales engineer

  National Instruments

• deploy the web service to xp embedded

  Hi all

  I struggle to run a web service on an xp embedded system. The web service works very well in my LV 2011 development environment and I have created an installer for my main application it is the lvws file is included as described in web services FAQ:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7747#toc12

  After the installation on the target computer, I can't access the web service. Also if you call localhost:3580, then I get an access error.

  But in the System Control Panel administrative tools, I can see that the server system OR like many Web server OR Web applications are started.

  For further investigation, I added the 'Distributed System Manager' to my Installer. With this tool, I see that all my web services deployed on my development system, but on the XP embedded system with TEN target is listed.

  I installed my application for a professional reference XP system to exclude that the problem is caused by embedded XP. But the behavior is exactly the same. So far, I tested only local so that settings security like firewalls and ports system should pose no problems. But to be sure I have disabled the firewall without success... I can't access the Web service. I have often found the suggestions in the forum to check if the web service is enabled. But I am not already and then access to http://localhost:3580.

  Any ideas?

  Thank you!

  This help document is somewhat outdated.

  You see 2 different problems: 1) you can not display the Configuration utility and do not install Web using localhost:3580 2) your web service monitoring.

  For the first number-->

  You probably did not understand the "Interface Web NI 2011 infrastructure" in your Setup program.  The doc to help you mentioned does not tell you to do, because it is not necessary for your web service works. However, if you want to change one of the settings of your web server after the installation, you will need this extra setup program.

  For the second question-->

  You probably didn't get your Spec to build Web services as a source file in your Setup program.  The help doc says to put your LVWS file as your installation source, but this is not correct. You must include the technical article to build real web service as a source file (not the web service create out of spec files, like LVWS).

  Let me know if any of these will help you.

  -Jared

• How to deploy the web service PAPI

  I am new to OBPM.
  I use BPM studio 10.3 to create processes.
  I set the preferences of the engine "from PAPI web services." This works.
  But I do not know how to deploy them to web services PAPI since the BPM web service console shows that no service is deployed.
  
  Please tell me how to deploy BPM processes.
  
  Thank you very much
  
  Published by: YE on March 27, 2009 09:58

  To expose processes that Webservice, please follow the steps below.
  Just click on process--> select process Webservice then it will open a new window, and then specify the name of the corresponding input parameter Web service method.

  Then build the application and test the service by clicking on the icon LaunchDeployedWebServiceswebapp in Eclipse, it will open the new window, it contains information about Web service, URL endpoint to access the WSDL Style HTTP WS, WS-Security authentication basic authentication.

  Thank you best regards &,.
  M.Kumaraswamy.

• Errors of auditor of host name in the web service client

  We have a Web service consumer who runs in WebLogic, and we receive a host name error check whenever the consumer trying to communicate with the external Web service. The error occurs because the subject of the certificate is for a host name that is different from the URL that uses the consumer.
  
  A possible solution is to write a custom hostname Verifier, but we would prefer not to do so. Can mitigate this error if we import the external Web service certificate is added to the WebLogic truststore?
  
  Thank you

  NO, it can't be mitigated...

  Import the certificate into the trust store means that you trust the certificate, but if the CN of the certificate does not match the hostname... we must disable hostname checking / write a custom host name auditor...

• jDeveloper WebService package installed, but the Web Service features are not available in the application wizard

  Hello

  I installed jDeveloper (Studio Edition Version 12.1.3.0.0) and also I installed some packages, for example the Web Service package. But when I create a new application project / I can't select for example of Web Service Client / Proxy and others. See photo:

  

  Do you know why? How can I make available?

  
  THX!

  Milan

  OK, I found it

  I created an application (Custom Java) with the empty project, and then I was able to add the web service client project (right click on the 'project' and select 'of the Gallery"). The same window appears as in my first post, but all features are available

  

  Thank you!

  Milan

• JDeveloper Web Service Client/Proxy basic authentication

  Hi, I recently migrated a 10g Web Service to a Web Service that uses authentication of database 11g.
  
  Then I generated the proxy/client by using the WSDL for my consumer application in JDeveloper 11 g. However, I can't find all the functions that will allow me to set the user name and password to access the web service.
  
  For example, in 10g Client, I had simply to this:
  
  myPort = new SoapHttpPortClient();
  myPort.setUsername ("username");
  myPort.setPassword ("password");
  
  I don't know how to do the same thing in the Web Service client generated in 11g.
  
  Thanks in advance.

  Hello

  See the beginning of this blog entry: http://biemond.blogspot.de/2009/04/jax-ws-web-service-proxy-client-and.html

  Frank

  BTW. : I used Google

• Problem with creating Web Service Client using Oracle JDeveloper

  Hi all
  
  I am trying to create a Web Service Client using Oracle JDeveloper. The property of the compiler of the project I updated JRE 1.4
  
  When I run the web service client, he gives me a lot of errors saying:
  ' Error (32.2): annotations are not supported in - source 1.4'
  
  I wonder why JDeveloper uses annotations even after that I set the compiler property to 1.4
  
  I'm following this link to create the Web service client:
  http://www.Oracle.com/technetwork/developer-tools/forms/WebServices-forms-11g-094111.html
  
  Any help in this regard would be greatly appreciated.
  
  Thank you
  Scott.

  Scott, when you run the proxy Web service in JDeveloper, you will see a bunch of jars listed in the classpath in the Journal JDeveloper window.
  All of these classes must be in the classpath of your server when the class is deployed there.
  Note that by default, I don't think they are going to be included in the JAR that you build for the proxy when you deploy.

• How to create a generic method that calls the Web Service

  Hi I have a question how to create the Web Service client. In design mode, I can't specify static URLs? WSDL and process.
  
  I found the briliant method in library of apache cxf.
  
  for example
  
  DCF JaxWsDynamicClientFactory = JaxWsDynamicClientFactory.newInstance ();
  Customer customer = dcf.createClient ("http://soabpm-vm:8001 / soa-infra/services/default/MailSender/mailsender_client_ep?") WSDL");
  
  Object [] results;
  try {}
  Results = clientA.invoke (QName new ("http://xmlns.oracle.com/SynchDSBpel20/MailSender/MailSender", "process"), '@', 'body', 'subject');
  } catch (Exception e) {}
  
  
  In my case, I should create a method with params (URL? WSDL, URI, name of operation, param1, praram2, param3)
  
  
  Y at - it something like CXF in the ADF library?

  If your question has been answered, can you please mark as answer?
  THX
  Antonis

• How to get the IP address of the calling client to the web service built in Jdeveloper 11.1.1.7 application?

  I built an application of web service in Jdeveloper 11.1.1.7 to be used by other clients. Just the General steps as follows (Server web service Application is generated--> deployed on the server-> used by clients with the location of the WSDL file).

  Now, I met a requirement where I need to get the port number and IP address for the client.

  Questions :

  How to get the IP address of the calling client to the web service application generated in Jdeveloper?

  Commune technologies used to build web service applications is AXIS or CXF. What Jdeveloper technology use to built web service application?

  The common technologies used to build web service applications is AXIS or CXF. What Jdeveloper technology allows built web service application?

  It depends on the option selected during the creation of web services (if I remember correctly, there are several options, style J2EE 1.4 RPC style JavaEE JAX - WS 1.5,...)

  For example, to get the ip address of the compatible with jax - ws web service, you need to inject the context in your service class with:

  @Resource
  WebServiceContext wsContext;
  

  and then inside your method:

  MessageContext mc = wsContext.getMessageContext();
  HttpServletRequest req = (HttpServletRequest)mc.get(MessageContext.SERVLET_REQUEST);
  String ip = req.getRemoteAddr();
  

  Dario

• The unauthorized JAX - RPC web service client?

  I try to call a 3rd web service part using a WSDL I can't control.  I was unable to send requests by using a style JAX - WS client and errors have led me to believe that this was due to the WSDL using the RPC/Document model.  Checks showed there is, in fact, the primitive methods of return base schema.  My understanding is that I have to use a JAX - RPC client in this case.

  JDev generated successfully objects, but I got whitelist errors that I have deployed in the cloud.  Basically, any class that referred to java.rmi failed (as documented) - and that's almost all main objects for the customer.

  Is there a way around this problem?

  • Is there another method to generate JAX - RPC clients?
  • The cloud is possible to accept the java.rmi. * classes?
  • Is there a way to force the web services JAX - WS upset WSDL RPC/Document?

  Thank you

  Alex

  I do not think that RPC is supported, see unsupported features and API which States:

  Feature not supported	Alternative
  Web services based on JAX - RPC.	Convert in JAX - WS web services.
  Remote invocations with a transport protocol other than HTTPS (including the HTTP text).	Does not apply.

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/

• Deployment of Web Services has failed. Web applications server OR still load.

  I installed LabVIEW 2013 and I am trying to publish the web service. Every time I try, I see this message: "unable to Web Services deployment. The Server Web applications OR load again. »

  I don't know how to stop or complete this loading. I have reinstalled LabVIEW 2013, removed LV 2012 and other software. In addition, when I restart the 32-bit server, I have old web services installed. Even if I do not publish them, they appear after the transition to 64-bit-> 32-bit server.

  I will be grateful for your help.

  Peter

  Hi all

  It was a problem introduced with the new deployment of LabVIEW web services in 2013, specifically on laptops (classified as CAR 422680). It is fixed in the patch of f1 2013 LabVIEW. This patch is available for download here and you can get more information about the patches in the patch here. The patch will travel via Service Update OR later this month.

  Kind regards

  Jeff Peacock

  Product Support Engineer | LabVIEW R & D | National Instruments

• The deployment of Web Services custom R12

  Please let me know how to deploy the custom web services of R12. We have not installed in our instance of Oracle Enterprise Manager.
  
  Thank you

  You really need a manager of the company. You can install EM from the SOA Suite CD simply select the j2ee option not Suite SOA full blown.

  Not sure what you mean by R12, is this e-Business Suite. Web services must be installed on the same application server as the e-Business Suite, it can be installed in any oc4j / j2ee application server. If it's e-Business Suite, the application server will probably need connectivity to the e-Business Suite.

  You want the Web service for you do generally use adapters supplied for eBusiness Suite integration.

  see you soon
  James

• Error SSE2 optimization in the deployment of Web Services

  I'm migrating from 2010 to 2011 SP1 web service [because web services 2010 SP1 were buggy]. At first, I could build and deploy the code very well. Now, I get the following deployment error:

  LabVIEW error: (Hex 0xFFFEFA45) LabVIEW Web Services: call to create a VI reference failed. The target does not support SSE2 optimization. Disable SSE2 optimization in the Advanced dialog box of the Web Service Properties page before continuing.

  Based on the online documentation, my hardware can support SSE2 - but no matter, I disabled it anyway. The error message persists. This message means anything this SSE2 optimization is enabled and is not supported? Based on the text of the error, it seems that turning off optimization should probably fix the problem...

  
  

• Error downloading pdf application ADF using the Web Service & BI Publisher

  Hello

  I work with BI Publisher 11 g and JDeveloper 11.1.1.7. I get the error when clicking on the below download link.

  I tried the link below and to generate the report in my app, but after clicking view pdf button throw error.

  Antonis Antoniou blog: integration of Web Services in your ADF Application Part 2

  
  

  Basically, I want to download the PDF using the Web Service & BI Publisher pursuant to the ADF.
  

  Someone has encountered this problem before? You have all the solutions / suggestion?

  
  

  

  Thank you

  Swathi

  Have you tried to get the catalog via the service?

  As I said before, there you have catalog you to see you making the user you are using to connect has access.

  Have you tried to give the full url for the report? check out the blog I posted before where you see how to specify the full url.

  Timo