Deployment/Configuration 12 c problem Agent of OEM 12 c Console upgrade

Similar Questions

• Problems to change my url endpoint data control for Web Service design time vs deploy times. Where is the url of time to deploy the "deployment configuration" stored?

  https://blogs.Oracle.com/ADF/entry/changing_endpoint_url_for_a_web_service_data_control

  Using this link as a reference, I created a data control Web Service, and when I deploy via JDeveloper for different environments I can change my point of endpoint accordingly on this screen:

  

  However when I change my point of termination at the design time, the changes do not appear in the screen "Configuration of the deployment. This would not normally be a problem, but our automated deployment (maven/ant) seems to keep picking up the url "Deployment Configuration" instead of what we change in the DataControl.dcx. So I have a few questions:

  1. Why is there a difference between what we have in the source code and what is shown on this ""Deployment Configuration "screen for manual deployment of JDeveloper? "

  2. where is this "Deployment Configuration" end point url located? I can change it during an automated deployment as I can on a manual deployment?

  3. What is the best practice to change a url endpoint to the Web Service data control with during an automated deployment?

  It turns out that the connections.xml had the url of the endpoint that the profile of the deployment and jdeveloper was referencing at deployment time.

  In order to get our automated generation work, we use a search and replace of Ant utility to change endpoint in this connections.xml before construction/deployment of the application.

• error "could not complete the configuration of the ha agent on the host computer.". bad configuration of the host network.

  Hola y buenos dias

  me esta dando este error cuando a UN con cluster 2 hots the digo el HA assets. There buscado por internet y the mayoria of las hacen referencia a lo mismo responses:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1039108

  The config of VMware high availability (HA) falla con el error: unable to complete the configuration of the HA agent on the host

  Symptoms

  Resignation: this article traduccion of one ' configuration VMware High Availability fails with the error: unable to complete the configuration of the HA agent on the host "(1019200). Los items han sido traducidos en Español multiple in el mejor esfuerzo. Sin embargo el contenido o can meet desactualizado specific location. Para revisar el contenido mas reciente, please consult el article in English.

  • The config of falla of VMware high availability (HA)
    
  • El client vSphere muestra una Cònsola de Servicio, sin embargo al run el comando esxcfg-vswif - l cuando is esta conectado has the console of Servicio de ESX is revelan consolas additional service
    
  • Following messages appears:
    
    
    • Cannot complete the configuration of the HA agent on the host. See the details of the task for more information.
      
    • Misconfiguration of the network host installation
      
      

  Resolution

  Este problema compares cuando no todos los servidores del cluster the same comparten consoled of servicio o the same config administration of red. Some servidores pueden tener consolas service using numbers different o pueden tener mas that consolas otros servidores.
  
  For example, este error can suceder tambien if the config of the puerta of enlace (gateway) of VMkernel none are the same para todos los servidores del cluster. Para Québec the config, haga click derecho in los servidores con este error y select reconfigure for HA.
  
  Revise las differences in the Red between los servidores config if usted goes a usar por Auto (off o Power Off) x responses, porque estas options provocan eventos registro 'VMware HA isolation' and consoled her of servicio o el registro fallas of administration of red.
  
  If using the funcion esta: VM left the lights on in answer of x, the opcion para ignorar estos messages is available VMware VirtualCenter 2.5 update 3.
  
  Para configurar VirtualCenter para ignorar estos messages, configure the option advanced das.bypassNetCompatCheck como 'true '.
  
  Nota: Cuando esta using the option das.bypassNetCompatCheck, El mechanism of pulse used during the solo en VirtualCenter 2.5 relaciona config direcciones IP simétricas subredes dentro a traves of los nodos. For example, en UN back nodos cluster, if a server has "Service Console" 10.10.1.x 255.255.255.0 vSwif0 tiene y vSwif1 "Service 2" 10.10.5.x Console y el servidor tiene vSwif0 "Service Console" 10.10.2.x 255.255.255.0 B y vSwif1 "Service 2" 10.10.5.x, el pulsation solo opera Console sober vSwif1.»» Desde vCenter Server 4.0, can be related through subredes, hacer TR 'Ping' between subredes are allowed. Sin embargo on VMware is replaced by Recomiendan tenerlas Las subredes dentro.

  1. Haga click derecho in el cluster, luego haga click change settings.
     
  2. Quite the selection to turn on VMware HA.
     
  3. Hope a todos los servidores en el quiten HA cluster.
     
  4. Haga click derecho in el cluster, elija y change the settings.
  
  
• Select turn on VMware HA, luego elija VMware HA desde el cuadro of the izquierda.


• Select Advanced options.
  
• Adicione opcion das.bypassNetCompatCheck con el valor 'true '.
  
• Haga click OK in the options advanced, luego haga click en OK again pantalla para aceptar los cambios in el cluster config.
  
• Hope a todos los servidores ESX in el reconfiguren HA cluster.
  

El tema are that he made lo go y sigo don't con el mismo error y no lo tengo claro what me escapa.

OS explico mi arquitectura

Cluster development: 2 hots ESXi HA con 4.1U1 en mi red (the same as el vCenter)

* Cluster production: 6 Hots ESX HA con 4.1U1 en mi red (the same as el vCenter)
* Cluster DMZ: 1 Hots ESXi 4.1U1 esta en UN behind del cortafuegos Swicth how, y todo el trafico between el host y el esta allowed vCenter
* NuevaDMZ cluster: 2 Hots ESXi 4.1U1 ante las nuevas needs y ante together por parte del responsible of poner seguridad como DMZ is replaced by vmware Recomiendan to vuelve a poner the same config as the DMZ real osea, estan en UN behind del cortafuegos Swicth how, y todo el trafico between los hosts y el esta allowed vCenter.
El switch DMZ y nueva DMZ of course are the same.
Editor rated UN of fotos explicativas.
01.intro good example of config del cluster ESXi Québec TR cluster is activa el HA
version of 02.VM02 y config of Red TO host led (Eliminado porque no puedo mas undergo 5 Fotos)
version of 03.vm03 y config of Red TO host led (Eliminado porque no puedo mas undergo 5 Fotos)
04.the HA configuration config del cluster as falla
version 05.VM04 y config del SO red host
version 06.vm05 y config del SO red host
07.immolation error pues eso el

• Impossible to deploy Configuration

  After this article, I can't deploy configurations. Here is the error message I get:

  vCenter Lab Manager could not find pools of hosts or resources to deploy those virtual machines.

     at LabManager.Backend.CDeployableVMContainer.DeployVMs(DeployOptions options, CVirtualMachine[] vms) 
     at LabManager.Backend.CDeployableVMContainer.Deploy(DeployOptions deployOptions, List`1 vmList)

  My hosts, data warehouses, and Resource Pools all seem to be OK and online. vCenter seems to operate normally.

  Any ideas on how to fix?

  Thank you!

  weird... uh... Is there still a pool of resources assigned to this organization and the workspace?  The message is as if there is no compatible host.

  1. the need to ensure that we have a cluster/host/PR assigned to Org and workspace

  2. check the physics of networks, to ensure that each ESX host has successfully bound to it

  3. ensure that the data store where the virtual machines are available for each ESX host and are enabled for the provision of the VM.

• error "could not complete the configuration of the ha agent on the host computer.". misconfiguration of the installation of the host network.

  Hola y buenos dias, he puesto 2 hots directly in una DMZ y al activar el error HA da este:

  "Unable to complete the configuration of the ha agent on the host computer.". misconfiguration of the installation of the host network.

  ESTOS son gemelos servidores y poner esta durante 2 Años last config antes han estado dentro infraestructuras en a cluster con otros 4 running perfectly. Ante nueva situation that met responsible security perimeter solo our esta posibilidad por lo as procedimos dio el a preparar los hots ante the nueva config enchufamos estos y an el swhitch of the demilitarized zone.

  Según me ha EDI el responsible of security perimeter, todo el trafico desde estos 2 hots hasta el esta allowed vCenter y asi mismo el cortafuegos responde al trafico ICMP a estos hots (este tema that he read in various Québec sites are important para el HA).

  Version of hots los Esxi 4.1.0 721871

  Me falta algo o tengo algo configurado evil?

  Important Algo a revisar?

  A greeting is gracias por adelantado

  Buenas

  Me designed that tendras 2 con 2 direcciones distintas vmkernel (lo del tema Las vlan y las tarjetas're menos ahora lo)

  Prueba has see the resolución desde el propio ESXi, prueba el uno a otro por both vmkernel ping, etc...

  A malas, saca ambos nodos del cluster y vuelve a unirlos con desactivado, cuando tengas los 2 HA, activa HA of nuevo y con eso you can smear of dudas so por el tema del VC University y UN vicio en BBDD.

  If todo esto falla, have as plantearte touch en el aam, are fairly complejo y peligroso if no to sabe hacer correctamente.

• How to configure the network device agent

  I added a network device (router) in the new platform, its not to go for all of the alerts in tool Hyperic. How to configure the network device to get information to the Hyperic server. Do we need to do any configuration of SNMP.
  
  Can someone help me please.

  Hi Cyndhya,

  Do you mean you want to see traps SNMP generated by your device network at HQ? To do this, you need to configure one of the agent HQ to receive traps and configure the network device to send the trap to the agent. Once this operation is complete, you should be able to add the device network platform (you must use the agent HQ for the monitoring network device connection).

  Here is the step by step guide:
  http://support.Hyperic.com/display/DOCSHQ30/agent+SNMP+trap+receiver

  Koffi

• Problem with animation .oem EDGE

  Hello world

  First of all, I want to thanks to all of the community forum Adobe for many of the useful discussions and lots of useful information. It is my FIRST post in the Adobe Forum.

  Well, I am a member of creative cloud and I'm almost finished our first DIGITAL MAGAZINE (visit Montenegro). I think we're doing great work, and this digital magazine is published as a standalone application.

  We discover very nice and attractive opportunities for animation with Adobe EDGE Animate. Unfortunately, something is not right here. We install the new EDGE (v 1.5.0.217.23270) and we create an animation

  for the COVER page. We follow all the instructions and we publish file OEM.

  When we put this file OEM in inDesign, we had not seen the animation in the PREVIEW of the OFFICE, but also when we test folio on iPad - same problem appear - we have not only static IMAGE POSTERISEE animation.

  By the way, animation works well when we saw in the browser (and for more information - put us AUTO PLAY on the EDGE - SCENE and also in inDesign Web Content + 0.125 dry delay).

  Now we try with another solution - make us frame in inDesign and we put the HTML file of the same animation in this setting (Folio overlays/Web Content). Then, we discover that NICE WORK with this kind of implementation of animation.

  But still, we want to know WHY. Animation of the OEM did not work in inDesign (folio files/articles)? Do you have someone from Adobe can tell us is there any problem with EDGE .oem files and inDesign CS6? It's strange, because we have the most recent edge and inDesign versions, but still we have the problem with the .oem animation files (does not work!). This great opportunity to make the most attractive digital magazine with animations created in Adobe EDGE must be better tested and be reliable for users in my opinion.

  I have appricite any kinf of information from other users, as well as representatives from Adobe. Thank you.

  I gave you the link. Find the right download for your version of InDesign and platform.

  Bob

• Deeper debugging on the "deployment operation failed on the agent with an error...".

  I tried to deploy a very simple plugin, a couple of settings with Snmp Fetchlet. Nothing complex.
  
  ILINT pass (although I'm not specifying a file of target.xml as examples and models do not seem to correspond to what expected the DTD), here is the result:
  -bash-3, 00 #... /emctl ilint d 0-i sysman/emd/no_targets.xml m sysman/admin/metadata/my_storage.xml - c sysman/admin/default_collection/my_storage.xml
  Oracle Enterprise Manager 10g Release 10.2.0.1.0
  Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
  Not analysis Instance file target (targets.xml)
  Validate the Collection target sysman/admin/default_collection/my_storage.xml file
  Validating target metadata file sysman/admin/metadata/my_storage.xml...
  Target the sysman/admin/metadata/my_storage.xml successfully validated metadata file
  
  The plug-in is imported into Oracle EM GM 10 5 correctly.
  
  When I try to deploy, I get an 'error '. I go to the screen deployment errors and warnings and that's:
  Deployment operation failed on the agent with an error state
  
  Where can I find some sort of journal or information more deeply in the error state?
  
  Paul

  The preferred credentials you set for the agent where you try deploy it, are the same identifying information for the user who owns this agent install? During the deployment, files that are placed on the agent receive the same permissions and owner as install other files on the agent.

• Upgrade OEM 10.2.0.5 from 12 c officers do not under Console upgrade

  Hello

  As we put more than 100 agents 10.2.0.5 in OEM 12.1.0.3 OEM, don't have oracle passwords (OEM 10 g agents are runing like the oracle accout) and PAM authentication does not work for our environment (open SR) we want to know if there is a solution for the upgrade of agents and not using the console to upgrade.

  Kind regards

  Nicolas

  The agent upgrade can be done from Console PreUpgrade. We do not have another method to upgrade.

• Having problems with Adobe Suite C. after the upgrade to El Capitan on an iMac?

  Someone at - it problems with Adobe Suite C. after the upgrade to El Capitan on aiMac? What did you do about this? What helped?

  In case you downloaded the Apple Stroe Yosemite, it always can be downloaded in the section of your account purchases.

• Deploy the Agent Via OEM GC

  I have OEM GC 10.2.0.5.0 / g 11 DB running on a redhat Server 5. I normally install manually the OEM agent on other machines, but I would like to make agent OEM integration feature works for me, but I can't do it. When I go to the tab "Mutations", section Installation of the Agent, Agent to download the software and click on the "Download" button I get an error: "internal error occurred. Check the log file for details. "I was following in emoms.trc. I checked clearly as an internet connection. A couple of things, I wonder about where is agent downloaded from and make I need to specify credentials somewhere?
  
  2010-07-22 14:02:25, 384 [EMUI_14_02_25_/console/target$ ctxType = hosts] WARN pref. SubtabPref getFolders.710 - unknown case id: VirtualServers comes from repository
  2010-07-22 14:03:55, 380 [EMUI_14_03_55_/console/agtdnload/downloadAgentKit] ERROR ltfu. HandleRequest.640 PageHandler - java.lang.NullPointerException
  java.lang.NullPointerException
  at oracle.sysman.eml.ecm.agentpush.DownloadHelper.getSelectedIndex(DownloadHelper.java:361)
  at oracle.sysman.eml.ecm.agentpush.DownloadAgentKitController.handleDownload(DownloadAgentKitController.java:474)
  at oracle.sysman.eml.ecm.agentpush.DownloadAgentKitController.handleEvent(DownloadAgentKitController.java:181)
  at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:578)
  at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:777)
  at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:328)
  at oracle.sysman.eml.app.Console.doGet(Console.java:304)
  at oracle.cabo.servlet.UIXServlet.doPost (unknown Source)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
  at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
  at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:265)
  at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
  at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
  at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
  at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
  at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
  at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:369)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:670)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816)
  at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:231)
  at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:136)
  to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:192)
  at java.lang.Thread.run(Thread.java:534)
  2010-07-22 14:05:41, 083 [EMUI_14_05_40_/console/agtdnload/downloadAgentKit] ERROR ltfu. HandleRequest.640 PageHandler - java.lang.NullPointerException
  java.lang.NullPointerException
  at oracle.sysman.eml.ecm.agentpush.DownloadHelper.getSelectedIndex(DownloadHelper.java:361)
  at oracle.sysman.eml.ecm.agentpush.DownloadAgentKitController.handleDownload(DownloadAgentKitController.java:474)
  at oracle.sysman.eml.ecm.agentpush.DownloadAgentKitController.handleEvent(DownloadAgentKitController.java:181)
  at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:578)
  at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:777)
  at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:328)
  at oracle.sysman.eml.app.Console.doGet(Console.java:304)
  at oracle.cabo.servlet.UIXServlet.doPost (unknown Source)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
  at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
  at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:265)
  at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
  at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
  at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
  at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
  at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
  at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:369)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:670)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816)
  at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:231)
  at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:136)
  to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:192)
  at java.lang.Thread.run(Thread.java:534)

  If the preparation you need to do before being able to push the Agent from the console OEM GC in this post described:

  http://oemgc.WordPress.com/2008/06/19/deployment-of-an-agent-preparation/

  His accent is OEM GC 10.2.0.4 for 10.2.0.5, it will be the same

  concerning
  Rob

  http://oemgc.WordPress.com

• Deployment configuration Assistant problem

  I did everything up to the point where I enter the IP address of the Simulator, but it returns the following error:

  "Unable to connect: connect to /192.168.xxx.xxx:443 has expired.". Check the settings of IP address for the target. You may need to restart the target. »

  NB: I tried to restart, but that has not worked.

  What you can try to do is to change your network settings of your vmware to use a bridged instead of NAT network.
  Stop the Simulator and then search for the settings option. Under network, select settings jumpered. Resart the Simulator.

• Deployment configuration, review, Jabber - config.Xml

  Hi all

  Doing my best to get better acquainted with Jabber and its configuration and to improve its functionality beyond the current "It works", but I have meet some roadblocks, including a few I will detail here.

  The first thing I wanted to address was last updated the file config.xml - jabber with some specific parameters common to our business, trivial as failing for the landline phone rather than the phone software, to things more as actually specifying a server update here on the premise.  The first and perhaps the main question I have is trying to deploy this file (the one I created using jabber - config.html).  I can't yet confirm that I have configured correctly because I can't deploy in the way I want.

  Currently, jabber - config.xml does not live locally on my PC.  There is a jabberlocalconfig.xml, but no jabber-config.  I found on the TFTP server, i.e. a config.xml file - jabber in the list of downloaded files, so I guess it's crazy.  Maybe not.  I would like to deploy the file I created in this very way, but until I can test it locally, I am not prepared to transfer to the masses (assuming again, it grows at all).  I tried to empty this file in the configuration file local under AppsData\Roaming...etc etc and even deleted all files jabberlocalconfig (she and her backup) before spinning towards the top of Jabber, but the moment that Jabber launches, the config.xml file - JAB is deleted and soon replaced by the file jabberlocalconfig (now ' white' (no previous stored parameters)).

  My first thought is that jabberlocal is perhaps a reflection of the config.xml file - jabber being pushed down, and our implementation partner did nothing to customize.  Download my file to TFTP could probably solve the problem.  Before that, I would have preferred to go over all that happens with the existing jabber-config on TFTP file, but I can't seem to download, CLI tftp SERVER get jabber - config.xml, either through the http://SERVER:6790 / jabber-config.  Be able to see the existing file would allow me to compare it to what is recreated and perhaps to make sense of it.

  The other idea is just that maybe jabberlocal is just ignorant jabber-config and for some reason, the local settings are common.  Similarly, maybe jabber-config is not yet pushed.  I restart the TFTP service on the pub and the sub as a Hail Mary of all kinds.

  TL; DR: Is there a way I can download a copy of the file config.xml - jabber in show in the TFTP on CUCM files list so that I can see him again?  Is it supposed to be a local copy of a config xml file called jabber - config.xml, or the local copy of the configuration settings is called something else?  Is there a way I can deploy a jabber - updated config.xml to date the only Jabber user (me) for testing purposes before pushing it at all without that crushing the Jabber Client at startup?

  Bonus questions:

  1.) something else I wanted to address this custom configuration jabber has been getting images of work on our fleet of iPad/iPhone.  Another thread suggested here that you may need allow photos contact EDI collection methods and BDI host Windows and non-windows.  Is it true, or is there a simple method to import photos that satisfied both environments?

  2.) was the control of menu updates to Jabber 10.6.x?  I remember seeing it on 10.5.x (and having it fail because I do not think that it either has been implemented at the time), but I could not find in the menu to 10.6.2.  Maybe he'll show up if I can get this config file (which I hope correctly pointing to updated web site) or maybe the functionality has been decommissioned.

  My apologies if this sounds elementary, I'm still learning the tricks of the trade with this kind of thing.

  You can download the same as a file for setting up the phone

  http://docwiki.Cisco.com/wiki/Endpoints_FAQ#How_to_download_a_phone_.cnf...

  And Jabber documentation also covers this:

  To verify that the configuration file is available on your TFTP server, open the configuration file in any browser. As a general rule, you can access the global configuration file to the following ADDRESS: http://tftp_server_address:6970 / jabber - config.Xml

  No, in 10.6 there no local copy, only in previous versions.

  Yes, jabber documentation covers how to define the scope of support for Cisco, so you can use a specific configuration for certain endpoints, it applies only to the J4W and J4M. For Jabber clients which do not show the field of support, you can't anything in addition to the default config file

  On photos and directory, Yes, config EDI applies only to the J4W, all other clients, require the BDI config to work. If you have a mix, you need two directory entries configured.

  I'm running 10.6.1 and I do not see the verification of updates, very probably, you must enable and configure the feature appears, I have not tested in my lab.

• Postgrase vRA distributed deployment Configuration

  Hello

  We provide deployment distributed for vRA 6.2.2 and have question around the Postgres SQL Server implementation. Documentation talking about DB server between vRA device cluster. Does vRA mandatory distributed deployment requires vPostgres in cluster or can I separate a single instance of Postgres and post the two HRV to the same device.

  We do not want cluster DB server unless it is mandatory for the vRA.

  If only Postgres can meet the requirement, is there no specific configuration in DB let connect the two devices to HRV?

  Yes, you can use simple Postgres and works without any problem. And there is no specific requirement as such. He usually recommendation to have Postgres clustered for HA.

• Can not complete the configuration of the HA agent on the host. Another HA configuration error

  Dear team,

  
  I am facing a problem when setting up the AP on a single server. Scenario is the following:-

  
  Six months back I install the VMWare solution for our Organization. ESXi 4.1 is. At this time there were two servers in the cluster, and both have been configured with HA successfully.

  Now, I have a server added more in the Cluster, but when I'm trying to configure the AP on the same system, it gives the error "cannot complete the configuration for HA agent on the host computer.". Another HA configuration error. "(Screenshot attached) so many times I click with the right button on the server and select reconfigure VMware HA but failed.

  
  Could someone help me please. It is a live system and the knot very critical. If need help on an urgent basis.

  
  But in addition, we also bought a 1 year (TS) technical support for our prodcut. Could someone please guide me how can I get a ticket for it.

  Thank you and best regards,

  Gaurav Asthana

  
  

  Hi all

  Thank you for your kind support. My problem is solved and it is very simple. By turn off and turn on again the HA on the Cluster setting, the problem is solved. All servers are now configured HA.

  Thank you again...

  Gerard