deployment issues

Similar Questions

• Debugging on a real-time target - deployment issues

  Dear community,

  After RT my 9651 sbRIO module wiring code, I do tests to check the intended functionality. For this I start my main VI who deploys the code on my SoM and I can happily move forward with my debugging session.

  Sometimes, however, while in the process of deployment, I get an error saying:

  [VI - name] .vi loaded with errors on the target and was closed

  When I open the VI it has no errors and the VI should work a fine might think.

  My solution was so far of the VI, just open move the wires and terminals round, re - save the VI and this is the deployment works.

  This trick worked for a while, because deployment error ca occur arbitrarily on different VI making debugging quite cumbersome.

  I then went ahead and just run the wrong VI in RT mode by moving terminals and structures around to get the VI runs in mode debugging, but it is very time consuming.

  Given that 3 people working on this project and we use git-subversioning I also do not want to "touch" each time just screws for the debugging session will without actually modifying the feature.

  Has anyone encountered a similar experience or perhaps found a magical setting to avoid this subject a lot of time?

  Hello

  If solutions already present Spex does not do the trick for you, clearing the cache of the compiled object can help.

  For more information, take a look at the following link:

  Why my screws are loaded with errors when it is deployed at my target in real time? -National Instruments
  http://digital.NI.com/public.nsf/allkb/7F6502FF0560FA9086257EB3005B13BA

  Concerning

  Alex

• TestStand on Windows 2K 3 x 64 deployment issues

  Holil:

  I hope that there can someone advise me.

  I recently tried to build an application TS to deploy on a server running WIndows Server 2003 x 64, and I ran into some difficulties.  On my development system, (32-bit Windows XP pro), I built a deployment TS Installer.  I transferred to the destination machine.  Installation failed... He says that many files were missing from different CAB files.  I tried again... the second time I had more luck... the installation seems to take.  Using the License Manager, I turned on my setup using my development license (my deployment license has not yet arrived).  I tried to run my application and I get an exception that seems to indicate that the ActiveX DLL are not saved:

  Unhandled exception: System.Runtime.InteropServices.COMException (0 x 80040154): C
  Lass did not registered (Exception from HRESULT: 0 x 80040154 (REGDB_E_CLASSNOTREG))
  at System.Windows.Forms.UnsafeNativeMethods.CoCreateInstance (Guid & clsid, Obj
  ECT punkOuter, Int32 context, Guid & iid)

  I tried to register these manually to help

  regsvr32 "D:\Program NIUninstaller Instruments\TestStand 4.1\API\DotNet\Assemblies\CurrentVersion\NationalInstruments.TestStand.Interop.UI.AxControls.dll"

  but he complains that this DLL has no DllRegisterServer entry point.  (Is this the wrong DLL to register?)

  I tried to uninstall my deployment and installation the teststand full... and the SeqEdit seems to work fine.  (He must have registered the DLLs required, no?)  My app, however, still does not. I try to install Visual Studio to see if I can rebuild the application on this system with better results.

  I missed an important step?

  Thank you!

  Tom MacLean

  I think the problem was I have to target the solution for a x 86 platform... not any platform.  If I have other problems with this particular application, I was able to recreate the example Simple OI in a new project with the same exception that I had with mine, and change the target platform does the job.

• Group Policy - software package deployment issues via GPO

  Hello world

  I have a customer requirement that a 3rd party browser plugin must be installed in all versions of IE. Since the manual installation consumes huge person-hours, has planned to use the GPO

  Created GPO & home to respected UO - computer configuration--> policies--> the software--> Software Installation settings

  Plugin is not installed in any PC, all computers has following errors in eventviewer

  Event 101 ID - the assignment of application OrgPublisher PluginX 11.5 of policy chart plugin - msi deployment failed.  The error was: % 1274

  Event ID 103 - the removal of the assignment of the OrgPublisher PluginX 11.5 of the strategy chart plugin - msi deployment failed.  The error was: %value%

  Event ID 108 - cannot apply changes to software installation settings.  The installation of the software deployed through Group Policy for this user has been delayed until the next logon, because the changes must be applied before the user logon.  The error was: % 1274

  Kind regards

  Karthik V

  Hello Karthik,

  Thanks for posting your question on the forum of the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• Displacement of the ATG Board from one box to the other - deployment issues

  Hello team;

  You need ideas on a question.

  We are moving our ATG CA instance to a new box - by a change in society from A to b. all the schema (ORACLE) and ATG CA(running on JBOSS) is copied on.

  
  

  After spending the EAR CA to new JBOSS, CA load up - no problems. Change IP on Site & Agents URL, to the new location, made ' live the change ", but while deploying I get this error:

  
  

  Unable to perform an incremental deployment on target 'Production Agent'. Check for incompatibility of snapshot on agents.

  
  

  My question is: can I force an instant id?   The only change is the URL target in agent. CA schema has been moved and target DB was moved just like love

  
  

  Is the CA knows by target URL, this is the new location? The name of Site or Agent is the same.
  

  
  

  I want to just validate my steps... Please advice.

  Thank you

  Millon

  Yes, forcing the snapshot to new officers will work.

  It's something that we do when the new officer is added or agents are changed.

  Peace

  Shaik

• VCenter deployment issues 6 - domain SSO

  Hello

  I have a problem my head around defining the domain of SINGLE sign-on in my new vSphere deployment package 6.0. I have a domain active directory (server.local) and installing vCenter 6, you are prompted for the SSO domain name (default is vsphere.local). What I want to know, it is important that name and what is the impact of the choice or change default name? The reason for my question is the following:

  1. we have a vSphere/vCenter 5.5 for our domain infrastructure deployment and the application that uses vsphere.local as the domain of SINGLE sign-on.

  2. I am deploying a new environment 6.0 vSphere/vcenter for a new VDI environment.

  3. I will deploy a second 6.0 environment vSphere/vCenter for a second VDI environment.

  4. I will use more connected between two vCenter environment 6 because I want to keep totally separate.

  In factoring, is it safe to use vsphere.local for my first 6.0 deployment even if I use vsphere.local for my production environment 5.5 already? If it is OK, then is it OK to use vsphere.local for both of my 6.0 vSphere deployments, even if all three environments will be authenticating against the domain active directory domain.local? The domain authentication UNIQUE write anything to AD or just authenticates against it so that I can use the same SSO domain in three distinct environments without negative impact?

  Any help with sort my confusion with this would be greatly appreciated.

  Thank you!

  Yes, it is safe to use the same domain name SSO for multiple deployments of vSphere, even if you use the same Active Directory domain as a source of identity. Don't forget that before vCenter 6, you are not able to change the domain name from SSO for anything other than the vsphere.local and this has never been a limit to how many vCenter Server can be deployed and configured to use the same Active Directory domain.

• Deployment issue: oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener

  Hi all

  to begin a new deployment of portal, I get the following error. What's wrong?

  weblogic.management.DeploymentException:
  to weblogic.application.internal.flow.BaseLifecycleFlow$ CreateListenerAction.run (BaseLifecycleFlow.java:184)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  to weblogic.application.internal.flow.BaseLifecycleFlow$ BaseAction.invoke (BaseLifecycleFlow.java:112)
  at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
  at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:103)
  at weblogic.application.internal.flow.HeadLifecycleFlow.createListeners(HeadLifecycleFlow.java:175)
  at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:281)
  to weblogic.application.internal.BaseDeployment$ 1.next(BaseDeployment.java:648)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
  at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
  at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:61)
  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:208)
  at weblogic.deploy.internal.targetserver.operations.StartOperation.createAndPrepareContainer(StartOperation.java:94)
  at weblogic.deploy.internal.targetserver.operations.StartOperation.doPrepare(StartOperation.java:107)
  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:221)
  at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
  at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
  at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
  at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 000 (DeploymentReceiverCallbackDeliverer.java:13)
  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 1.run(DeploymentReceiverCallbackDeliverer.java:46)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
  Caused by: java.lang.ClassNotFoundException: oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener
  at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
  at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
  at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:249)
  to weblogic.application.internal.flow.BaseLifecycleFlow$ CreateListenerAction.run (BaseLifecycleFlow.java:148)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  to weblogic.application.internal.flow.BaseLifecycleFlow$ BaseAction.invoke (BaseLifecycleFlow.java:116)
  at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
  at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:103)
  at weblogic.application.internal.flow.HeadLifecycleFlow.createListeners(HeadLifecycleFlow.java:175)
  at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:281)
  to weblogic.application.internal.BaseDeployment$ 1.next(BaseDeployment.java:649)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
  at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
  at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:61)
  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:209)
  at weblogic.deploy.internal.targetserver.operations.StartOperation.createAndPrepareContainer(StartOperation.java:96)
  at weblogic.deploy.internal.targetserver.operations.StartOperation.doPrepare(StartOperation.java:107)
  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:221)
  at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:749)
  at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
  at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
  at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:160)
  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 000 (DeploymentReceiverCallbackDeliverer.java:13)
  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 1.run(DeploymentReceiverCallbackDeliverer.java:47)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
  >
  
  

  Kind regards

  Ministry of health

  You can check the Web ADF runtime libraries are included in the war file?

  Concerning

  Albin I

  http://www.albinsblog.com/

• Automatic deployment issues.

  I I have a problem with the auto deploy and am not understand if what is happening is normal or I'm not doing something good.

  I have a two-node cluster that I start from a copy of the default image ESXi 5.5.0 - 1331820-standard, my version is called ESXi_5.5 all work much as expected and I answer files and host working all profiles.  When I reboot a host, and he comes back and gets it of image, is added to the cluster, apply the profile of its host, begins to exit the Maintenance mode and configures HA.  OK everything is Peachy.

  So now, I made a new Image with some drivers extra I needed (this Image is called ESX_5.5New) and killed my old assets deploy rules and deleted, created new deploy rules and makes them active. The new rules to work somehow.

  If I reboot the host he still gets the old image with the new drivers.   Yet, if I stop the host and deport him vcenter and then start him upwards, he will receive the new image.  Surely, this isn't what you do every time you update the image.  am I missing something here?

  I ran the get-Cluster DR - Test | Get-vmhost | Test-DeployRuleSetCompliance and two servers come back as being compliant.

  I corrected my own question.

  Although when I was running get-Cluster DR - Test | Get-vmhost | Test-DeployRuleSetCompliance and two servers come back as being compliant.  The Auto deployment server was some how always caching of the old image.  Once I ran Repair-DeployImageCache every thing worked with me having to kick guests out vcenter.

• Impossible to deploy - issues with SSL keys?

  Hi - I was unable to get the last BDE (2.0) deployed in a new environment of vCenter.

  The environment is the following:

  A host ESXi - 5.5 build 1623387

  A vCenter device - 5.5 build 2001466

  Embedded DB, incorporated SSO

  BDE 2.0.0.951 build 1885370

  NTP and DNS are configured and tested.

  Deployment of seems to work fine, but I can't go beyond the error at initialization:

  ERROR: Unable to launch the Web Service of Serengeti. Illegal option: /opt/serengeti/.certs/serengeti_ws.jks.keytool - importkeystore [OPTION]... Any one or all entries from another file of keys... Options:... -srckeystore source keystore name. - destkeystore destination keystore name. - srcstoretype source keystore type. - deststoretype destination keystore type. - srcstorepass source keystore password. - deststorepass destination keystore password: srcprotected password key source protected. -srcprovidername source keystore provider name. -destprovidername destination keystore provider name. - srcalias source alias. - destalias. destination alias - srckeypass source key password. - destkeypass destination key password. - noprompt do not prompt - providerclass class name. Provider - provider argument. - providerpath provider classpath. providerarg - exit wordy v... Use 'keytool - help' for all available commands and, while I can connect to the server with the plugin, BDE

  I can't create objects as they cause an error "Unable to connect to vCenter Server" - it sounds like the BDE unit is to have a hard time, import the SSL vCenter keys. Has anyone seen this?  Any thoughts on getting a pass? Thank you! -Andrew

  Hi, could attach you the /opt/serengeti/logs/*.log files on server BDE?  And your BDE VAPP is deployed in the vCenter rather than the host ESX cluster?  You will see this error if it is deployed on the ESX host.

  -Jesse

• v11.1.2.3 rapid deployment issues

  Despite a facility would have been successful, I have questions.

  1. Java has not been installed as part of the deployment - I installed it now after the rapid deployment.
  2. When you try to open the workspace, I get a call on a screen of "Bindows", saying that he is responsible.
  3. There is no entry for the Console of Regional service as indicated in the instructions of audit: "Select Start, then all programs, then Oracle EPM System, then epmsystem1, then Essbase, and Essbase Administration Services, and then Start Administration Services Console."
  4. When you try to start the EAS using the browser and the address http://ws8v11123oras.home:9000/easconsole/console.html I get the launch screen but when lauched all that get is a blank admin SVC window.

  I am using Windows Server 2008 R2, with all updates painstakingly made.  I also have IE 11.

  Don't you think that 1 above is my only problem?  Is IE 11 ok?
  

  It was all a wild goose hunt that I made a simple mistake in the installation procedure.

• Nexus 1000v deployment issues

  I'm working on the Cisco Nexus 1000v deployment to our ESX cluster. I have read the Cisco "Start Guide" and the "installation guide" but the guides are good to generalize your environment and obviously does not meet my questions based on our architecture.

  This comment in the "Getting Started Guide" Cisco makes it sound like you can't uplink of several switches on an individual ESX host:

  «The server administrator must assign not more than one uplink on the same VLAN without port channels.» Affect more than one uplink on the same host is not supported by the following:

  A profile without the port channels.

  Port profiles that share one or more VLANS.

  After this comment, is possible to PortChannel 2 natachasery on one side of the link (ESX host side) and each have to go to a separate upstream switch? I am creating a redundancy to the ESX host using 2 switches but this comment sounds like I need the side portchannel ESX to associate the VLAN for both interfaces. How do you manage each link and then on the side of the switch upstream? I don't think that you can add to a portchannel on this side of the uplink as the port channel protocol will not properly negotiate and show one side down on the side ESX/VEM.

  I'm more complicate it? Thank you.

  Do not portchannel, but it is possible the channel port to different switches using the pinning VPC - MAC mode. On upstream switches, make sure that the ports are configured the same. Same speed, switch config, VLAN, etc (but no control channel)

  On the VSM to create a unique profile eth type port with the following channel-group command

  port-profile type ethernet Uplink-VPC

  VMware-port group

  switchport mode trunk

  Automatic channel-group on mac - pinning

  no downtime

  System vlan 2.10

  enabled state

  What that will do is create a channel port on the N1KV only. Your ESX host will get redundancy but your balancing algorithm will be simple Robin out of the VM. If you want to pin a specific traffic for a particular connection, you can add the "pin id" command to your port-type veth profiles.

  To see the PIN, you can run

  module vem x run vemcmd see the port

  n1000v-module # 5 MV vem run vemcmd see the port

  LTL VSM link PC - LTL SGID Vem State Port Admin Port

  18 Eth5/2 UP UP FWD 1 305 vmnic1

  19 Eth5/3 UP UP FWD 305 2 vmnic2

  49 Veth1 UP UP 0 1 vm1 - 3.eth0 FWD

  50 Veth3 UP UP 0 2 linux - 4.eth0 FWD

  Po5 305 to TOP up FWD 0

  The key is the column SGID. vmnic1 is SGID 1 and vmnic2 2 SGID. Vm1-3 VM is pinned to SGID1 and linux-4 is pinned to SGID2.

  You can kill a connection and traffic should swap.

  Louis

• Site deployment issues

  I'm working through book of the past powers adapting to a site I am developing and faced several problems of deployment of site successfully. For now, I will start with the function of connection. When I try to login, I get the following messages (no not extinguished errors still):

  ( Warning: require_once(Zend/Loader/Autoloader.php) [function.require - once]: failed to open stream: no such file or directory in /home/content/p/e/t/petermcdonald/html/scripts/library.php on line 5

  Fatal error: require_once() [function.require]: Failed opening required 'Zend/Loader/Autoloader.php' (include_path ='.: / usr/local/php5/lib/php ') in /home/content/p/e/t/petermcdonald/html/scripts/library.php on line 5

  The library.php file looks like this:

  <? PHP
  Change the path to match the location of the library folder on your system
  $library = "http: www.conmolbry.com/ZendFramework/library";
  set_include_path (get_include_path (). PATH_SEPARATOR. $library);
  require_once('Zend/loader/autoloader.php');
  try {}
  Zend_Loader_Autoloader::GetInstance();
  $write = array ('host' = > 'wfrma.db.5915058.hostedresource.com',)
  'username' = > 'wfrma ',.
  'password' = > 'xxxxxx ',.
  ('database_name' = > 'wfrma');
  $read = array ('host' = > 'wfrma.db.5915058.hostedresource.com',)
  'username' = > 'wfrmaread ',.
  'password' = > 'xxxxxx ',.
  ('database_name' = > 'wfrma');

  
  $dbWrite = new Zend_Db_Adapter_Pdo_Mysql ($write);
  $dbRead = new Zend_Db_Adapter_Pdo_Mysql ($read);

  } catch (Exception $e) {}
  echo $e-> getMessage();
  }

  I don't know, but it can be connected to a bad include_path based on my interpretation incorrect instructions in Lesson 13, p. 469. I use linux code procedure which I think is ok. What I don't understand is what this way well is supposed to look like in reality. The example is fictitious language, but this lure can not find a way to point to the location you need in my site on the remote server. Wouldn't be of this form: include_path = ' www.mysite.com/site root folder. /: PHP/includes: /? Need help with it.

  Also I found the instructions not clear if the host (in this case GoDaddy) indeed provides the Zend Framework, how to exploit that properly instead of downloading to a folder of library on my site at all. They gave me instructions to add this code in a file php.ini:

  [Zend]
  zend_optimizer.optimization_level = 15
  zend_extension_manager. Optimizer=/usr/local/Zend/lib/optimizer-3.3.3
  zend_extension_manager.optimizer_ts=/usr/local/Zend/lib/Optimizer_TS-3.3.3
  zend_extension=/usr/local/Zend/lib/optimizer-3.3.3/ZendExtensionManager.so
  zend_extension_ts=/usr/local/Zend/lib/Optimizer_TS-3.3.3/ZendExtensionManager_TS.so

  then place the php.ini file in the root of the site. They didn't on setting the include_path in php.ini too. That just doesn't seem to work either and I'm a bit confused now how either successfully connect to a ZF existing on the remote server in GoDaddy, or download the ZF and make the correct connections by following the instructions in Lesson 13.

  Sorry for this massive confusion and to tackle a couple of things in a thread. However, it is all related to exercise of the singular in the book. According to me, if I can overcome these obstacles of couple that I'm well on my way. Please let me know what additional information I could add to help understanding and a solution.

  Thank you!

  Peter

  I don't know how I can make this much clearer. The book describes two ways to handle the situation:

  • If you cannot change the php.ini file, just change the value of $library in library.php to match the location of the Zend Framework on your remote server.
  • If you can edit the php.ini file, set the include_path there and delete the two lines in library.php.

  It seems that you have the possibility to modify the php.ini (or php5.ini in your case). If you don't want to do it, using the first option should work fine.

  That said, I have no way of knowing what looks like the standard installation on your plan GoDaddy for hosting. If each different GoDaddy sites have their own configuration file (php.ini or php5.ini file) and you have replaced with that of XAMPP, you need GoDaddy to restore your configuration settings to the default values.

  On the other hand, if GoDaddy says that you don't need php5.ini for a standard configuration of PHP (or you are certain that there is no until you created it), you can delete the version that you copied from XAMPP.

  Zend Optimizer is a utility that improves the performance of PHP scripts. It is not necessary unless you build a complex application.

• .ear deployment issues

  Is there anything else that you have to do to successfully deploy a Cold Fusion .ear file created from the section of archive Administration of Cold Fusion (V8 Enterprise Edition)? I have deployed my file .ear to an Oracle 10 g with no error reported application server. The Manager server, the application is started, but when I hit the context for the server I get the following message is displayed:
  
  500 internal Server Error
  Servlet error: an exception occurred. Current application deployment descriptors do not allow for the inclusion in this response. For more details, please see the application log.
  
  The application is a single cold fusion page that makes the text 'Hello World '.
  
  I get the message even if I try to put in place the cold fusion administrator which I activated when I created the .ear.
  
  If anyone has successfully deplolyed an application using archive .ear, I'd appreciate your comments.

  We've thought of it. See a similar topic in the server administration.

• Deployment issues, how weblogic-ejb - jar.xml is related to the ejb - jar file. XML

  Hey guys,.
  I get the following error I think because I have something misconfigured in my xml files. Instead of activationConfig in my MDB yousing properties, I wanted to put them manually in the file ejb - jar.Xml. I get the error message next is...
  
  Unable to deploy EJB: MyMDB of MDBtest2:
  
  [EJB:011026] The EJB container failed when creating the java: / comp/env namespace for this EJB deployment.
  weblogic.deployment.EnvironmentException: [EJB:010176] the resource-env-ref 'inQueue", said in the descriptor file ejb - jar.xml has no mapped JNDI name. The resource-ref must be mapped to a JNDI name by using the element of description of the resources of the descriptor weblogic-ejb - jar.Xml.
  at weblogic.ejb.container.deployer.EnvironmentBuilder.addResourceEnvReferences(EnvironmentBuilder.java:641)
  at weblogic.ejb.container.deployer.EJBDeployer.setupEnvironmentContext(EJBDeployer.java:330)
  at weblogic.ejb.container.deployer.EJBDeployer.setupEnvironmentFor(EJBDeployer.java:1097)
  at weblogic.ejb.container.deployer.EJBDeployer.setupBeanInfos(EJBDeployer.java:991)
  at weblogic.ejb.container.deployer.EJBDeployer.prepare(EJBDeployer.java:1273)
  at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:372)
  
  
  
  EJB - jar. XML
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < ejb - jar id = "ejb-jar_ID" version = "2.1" xmlns = "http://java.sun.com/xml/ns/j2ee" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/ejb-jar_2_1.xsd" >
  < display name > MDBtest2 < / display-name >
  < some enterprise beans - >
  > by message <
  MyMDB < ejb-name > < / ejb-name >
  > class ejb < cms.crown.mdb.MyMDB < / ejb-class >
  Container < transaction-type > < / transaction-type >
  OMG < message-destination-link > < / message-destination-link >
  < resource-ref >
  weblogic.jms.XAConnectionFactory < res-ref-name > < / res-ref-name >
  javax.jms.XAConnectionFactory < res-type > < / res-type >
  Container < res-auth > < / res-auth >
  < / resource-ref >
  < resource-env-ref >
  inQueue < resource-env-ref-name > < / resource-env-ref-name >
  javax.jms.Queue < resource-env-ref-type > < / env-ref-type of resource->
  < / resource-env-ref >
  < / message-driven >
  < / enterprise beans >
  < Assembly-descriptor >
  < container-transaction >
  < method >
  MyMDB < ejb-name > < / ejb-name >
  onMessage < method name > - < / method name >
  < method-params >
  javax.jms.Message < method-param > < / param method >
  < / method-params >
  < / method >
  <>trans-attribut required < / trans-attribut >
  < / container-transaction >
  < / Assembly-descriptor >
  < / ejb - jar >
  
  WebLogic-ejb - jar.Xml
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < wls:weblogic - ejb - jar xmlns:wls = "http://www.bea.com/ns/weblogic/10.0" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/ejb-jar_3_0.xsd http://www.bea.com/ns/weblogic/10.0 http://www.bea.com/ns/weblogic/10.0/weblogic-ejb-jar.xsd" >
  <! - weblogic - version: 10.0->
  < wls:message - destination-descriptor >
  <! - search - method: JNDI->
  < wls:message - destination-name > omg < / wls:message - destination-name >
  < wls:destination - jndi-name > inQueue < / wls:destination - jndi-name >
  < wls: initial context factory > weblogic.jms.XAConnectionFactory < / wls: initial context factory >
  < wls:provider - url > address http://localhost: 8010 < / wls:provider - url >
  < / wls:message - destination-descriptor >
  < / wls:weblogic - ejb - jar >
  
  
  I hope it's readable, thanks for any help

  Hello

  It seems that the first thing you use EJB3 but your XML files always point to version = "2.1" and very old.
  
  
  
  

  * Try this: below file "ejb - jar. XML ".
  QCF = your factory connections JNDI name
  TestQ = your queue JNDI name
  Transaction attribute is ByDefault required =... so no need to add it here.

  
  
  
  
  MyMDB
  TestQ
  cms.crown.mdb.MyMDB
  javax.jms.MessageListener
  Container
  
  
  destinationType
  javax.jms.Queue
  
  
  connectionFactoryJndiName
  QCF
  
  
  destinationJndiName
  TestQ
  
  
  
  
  
  

  ----------------------------

  "weblogic-ejb - jar.xml":

  
  Now you just need to set the URL of the provider here... If you want a remote provider... else is unnecessary
  The JNDI names are already defined in the ejb - jar file. XML
  
  

  ------------------------------------------------
  Some links that you can refer:
  To generate deployment descriptors... .in case of EJB3 Applications: * http://jaysensharma.wordpress.com/2010/04/02/generating-ejb3-clientjar/ *.

  MDB3.0, example: * http://jaysensharma.wordpress.com/2009/08/17/mdb3-0-sample-for-weblogic-application-server/ *.

  .
  .
  Thank you
  Jay SenSharma

• Deployment issue

  Hello
  
  I use Jdeveloper 11 g and 10g of Weblogic. In my ADF project, there are 2 IU (Manager and showcase) and 1 model project. Each UI project has it's own app Module.
  
  There is no problem when I deploy only the Project Manager user interface. But after that we started to deploy both projects of UI in the same ear file, we started to receive random error messages. Session beans not initialize after a while, randomly.
  
  Are there tips for the deployment of 2 projects UI?
  
  Thank you.

  You can do it. However, if you share the template in all of your UI projects project then I would prefer to deploy the model as a separate library project and reuse them in the user interface projects. While adding the pattern for the UI project library, choose not to deploy option and deploy the UI project separately. In this way we could manage deployments / changes individual projects separately.

  I hope this helps.

  Kind regards
  ~ K