Displacement of the ATG Board from one box to the other - deployment issues

Similar Questions

• Moving installation of cluster COE from one box to another box

  We want to move the WCC existing (cluster) from one box to another box (the two unix). We have the cluster / folder {who have records cs /, vault /, weblayout /} on the drive shared, mounted in the source running on 11.1.1.6.0 machine.

  We installed the same facility in the destination area. We want to follow the steps below to move the config., destination data source.

  (1) stop the source servers.

  (2) modify the details of the db in destination of weblogic in the source db console.

  (3) remove the shared / source folder and mount in the destination area. (The vault, weblayout, cs files will be mapped directly to destination ucm)

  The other qns we are

  (1) the above steps are correct and COE will work without any problem.

  (2) do, the houses of the area must be synchronized (because the destination area is a fresh installation)

  
  

  Just to test, I copied the cluster/cs / source folder to the destination and destination of the content servers are working properly. (I did not copy arch / weblayout and changing the db)

  I saw an article on cloning of WCC servers

  It is Possible to Clone content Webcenter 11g? (Doc ID 1507480.1()

  He said the documentation http://docs.oracle.com/cd/E23943_01/core.1111/e10105/testprod.htm#ASADM11306

  Target already exists, it is just asking migrate config. using CMU. Should I worry field homes or cluster/cs is sufficient for the WCC smooth if they are synchronized?

  Thank you

  Narasa Kumar

  Narasa salvation,

  Yes, the steps you listed should be fine, as long as the details of the path are kept on the new host.

  Thank you
  Srinath

• Moving from one box to check if the needle will not allow resizing when not not using arrows

  Moving a box which was resized if small pointer will only resize diagonally or vertically. It is impossible to use the arrow keys. Is it possible to retrieve and move an object by clicking on it and possibly pressing another button or something similar?  Thank you

  Zoom a lot and you will be able to enter the central part of the field and

  Move it.

  One game, June 25, 2015 at 04:46, tonyp15249544 [email protected]>

• Simple Question - How to move virtual machines from 1 box to another?

  Hello

  I'm new to VMware products so please bare my stupidity.

  I have 2 servers I received vSphere on. They have all two internal storage (SAN No. still ) which means I can't take advantage of vMotion. So that leaves me to figure out how would one move a Virtual Machine from one box to the other? I currently have two boxes configured with a vCenter Server under 1 datacenter server.

  The simplest solution (considering vCenter) is cold using migrate operation.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• When I try to duplicate a layer from one file to the other why appears a window of "displacement"?

  When I try to duplicate a layer from one file to the other why appears a window of "displacement"? What should I do?

  Never seemed this before.

  Thank you

  I can't reproduce this. The layer as you try to duplicate a smart object and there a displacement map? Looks like you might need to reset your preferences.

• by dragging the boxes from one page to the other in tabs

  I like the tabbed pages feature because it keeps my own office while working, but I can't seem to drag boxes of pictures/text from one page to another when they are tabulated.

  Often, I need to do this to make pages with similar designs/style sheets/photos can I just draw a box from one document to another, etc... is there a way to do this in the tabs?

  Thank you!

  No, you can't do that.

  But why not just copy and paste.

  There is a very useful command called 'Paste in Place' under the Edit menu.

  You can copy a selection, then use CTRL TAB or CMD-TAB to move between windows, then paste in Place (CTRL (CMD) ALT (OPTION) SHIFT V)

  It is much faster as drag / drop objects

• Question about the displacement of vCenter from one physical server to another

  Here's the scenario:

  We currently have vCenter 2.5 installed on a windows XP machine. He manages 3 ESX hosts in a HA cluster.  I built a new server with windows 2008 x 64 and installed vCenter 4.0 by using a copy of our vCenter SQL database. Everything is going well so far, but now I have to say the 3 hosts where is the new vCenter. I have the procedure to change the ip address of the host. What I was wondering is when I go to the first host and change the ip address on the new server, the old server will be missing a single host. He will not try to turn on the virtual machine that were on this host on the other 2 immediately? Same thing on the other end. Once vCenter 4.0 has an added guest, won't he try and turn all the vm on it due to HA? Can I avoid this simply by stopping the service of vCenter on both servers before trying the switch?

  your virtual machine will be fine.  Everything you do is update vCenter management agents.  For example, you could simply make a disconnection and connection and information will fill as well.

• I have a problem of my catalogs of PES 10 displacement and the photos attached from my old computer with Windows XP on my new computer with Windows 10.  The problem is that I can't remember the arrangement of the original tree of my photo folders when I r

  I have a problem of my catalogs of PES 10 displacement and the photos attached from my old computer with Windows XP on my new computer with Windows 10.  How can I keep my original photo folders tree arrangement when I restore backups of catalog on the new machine?

  The problem arises because Windows 10 is equipped with a new tree structure with new names for many of its branches.  Tree of Windows XP starts to Local Disk (C), and then does the following: Documents and settings, Susan [it's me the user], My Documents, SusanPhotos (the folder that I created that contains my photos) and then several subfolders and subfolders with my photos grouped by theme, for example the Puglia Italy and Italy-Roma.  My new computer Windows 10 has a different tree and different names for a large number of branches from early on: OS (C) [instead of Local Disk (C)], users, Susan, Documents [instead of the old My Documents], SusanPhotos [what I created] and then the subfolders and so on.

  Because of the new tree and the new names of the branch, I can't find a way to restore my PES 10 catalogues and photos attached to them to where I want to that they.  What I want to do is put the files from SusanPhotos to the Windows 10 Documents folder so that I find myself with the following tree, essentially the same as what I had on my old machine: OS (C), users, Documents, Susan, SusanPhotos, then the original subfolders with my photos.  Apparently 10 PSE does not allow me to move folders of photos in the Organizer, so that the pictures stay connected.

  PES 10 offers 3 options for restoration: Original, personalized and customized, keeping the original structure of the file.  Here's what happens to each:

  (1) original creates new folders with the old names and the structure of the tree, parallel to the tree Windows 10 has instead of inside the tree Windows 10.

  (2) custom with the original structure of the file is the restaurant where I want (within the SusanPhotos) but retains all branches superfluous-instant initial tree of Windows XP, production: BONES (C), users, Documents, Susan, SusanPhotos, Documents and settings [carried over from the old computer], Susan, My Documents, SusanPhotos, Roma-Italy and Italy-Puglia and so on.

  (3) custom (without checking the original file structure box) makes every SusanPhotos but without any organization: OS (C),..., SusanPhotos, Italy-Puglia and Italy-Roma and all other folders at the same level instead of in their original nested groups with subfolders.

  The first two methods you end up with a tree that is chaotic with two parallel trunks or a single trunk but with several redundant layers carried over from the old computer.  The third ends with no tree at all.

  One solution would be to make a Custom Restore with the original structure of the file and then use PSE10 to move the folders that I would like.  However, AFAIK, PSE10 I cannot move entire folders of photos, only of individual pictures.  With thousands of photos in hundreds of cases, the time required for the movement of individual pictures is prohibitive.  PSE10 allows me to move the catalog folder, but apparently not the folders containing the photos.

  The result is that at this time I have no solution to my problem.  Can you help me find a way to restore my photos while keeping their original organization?

  One solution would be to make a Custom Restore with the original structure of the file and then use PSE10 to move the folders that I would like.  However, AFAIK, PSE10 I cannot move entire folders of photos, only of individual pictures.

  You simply use the 'Files' Panel on the left. Your folder tree appears. Simply, you drag and drop the folder to move with all its subfolders in the desired master file. That works exactly as in Solution Explorer, so be patient, you receive no message of progress until it is completed.

  You did a good job to understand the situation. I think that might help you is to understand that changes in the way default folders are created in a different version of Windows can be ignored if you do not use these structure 'default', from the shortcuts to your main folder of the user.

  I create a master folder 'My Photos' directly under the C: root.

  When I restore, I use the "custom" choice, as you have discovered, I only specify this folder in the restore process, and I completely ignore the default shortcuts to 'Documents' or 'Image '.

• Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  Hi all

  Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  I did program mentioned above but it does not work. Can you tell me what is the problem?

  There is no error is indicated in the program. If someone knows about it please try to find solutions and help me out of this problem.

  I have attached my program with this message.

  Thank you in advance!

  (1) FOR loops are your friend here.  You can make a slight restructuring using loops, and then you will have less mess to deal with, the inner loop through tunnels of autoindexing to make it even simpler.

  (2) I would only treat the numeric values of the characters.  So go terminal of control of the chain, the capital letters and byte array to before the outer loop.  You can use a size of Board over there to tell how many times the outer loop to iterate.

  (3) the Index table is extensible.  So you only need over the index of the first, and it will increment itself, as it develops.

  (4) you need to finish the lookup table (table 3D)

• Windows XP normal 'Boot' (no RECOVERY!) After the PC is 'HIBERNATED' from one day to the next?

  (... I've done the research and have not been able to locate one similar problem to others..)

  The "Hibernation" Star appears to be installed correctly on my PC,
  as I can enable the feature at the time manually (in the closing Wdws menu)
  and automatically (in the power settings).

  In the trial of the hibernation feature: (after a success "Hibernation")
  When I press the button power on the box, the expected
  "Recovery Windows" tray is displayed;
  and the PC correctly "resumes" from hibernation.

  But, the next morning ...
  (after successful Automatic HIBERNATION in the evening before),
  When the press,
  the computer Windows "RESTARTS".
  instead of the
  EXPECTED 'RECOVERY WINDOWS.

  How can I solve this problem or diagnosing the causes?

  Best regards, OT
  Note: this PC is on a network and must be put into hibernation
  for "wake on LAN" to succeed.
  .............................................................................

  DEll Dimension 4600
  P4 3 GHz, 2.5 GB
  Windows XP Service Pack 3
  TRENDnet Gigabit adapter: TEG-PCITXR

  ... Must be ...
  ....
  get to your network adapter properties form ...

  one) from Control Panel: click: System, click hardware. Click on Device Manager ...
        Click to Rt.: your network card ; Click: Properties ...
  or
  (b) Control Panel: network connections .
         Click to Rt.: your network card ; Click: Properties / click: tab configure

  Once your form properties of the network card ...

  Next...

  Click on the power management tab.

  Depending on your initial settings, the following process must be repeated several times ...

  Note: you want to end up with the following final settings:

  [ENABLED/CHECKED] Allow the computer to turn off this device ...
  [ENABLED/CHECKED] Allow this device to wake the computer ...

  In my case, I had to... [SET... RESET... SET] theover the properties
      two 2 times,  (Re-boot between the two) to the expected results...

  concerning
  OT

  Note: I suggest strongly that you confirm/install/reinstall latest drivers
  v to your network card before using this hotfix.

  Note 2: this patch is only for when your system already, correctly in and out of hibernation...
  ... but seems to "forget" it is put in hibernation for the next morning...

• Hotmail does not save my e-mail address and password from one session to the other

  original title: record the address hotmail and password

  Hotmail does not save my e-mail address and password from one session to another even if I check the boxes to remember my email address and password. Why didn't hotmail is no longer remember my info?  How can I fix this?

  Hello

  I'm sorry, but we cannot help with hotmail problems in these forums in response to vista

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

  Forums

  E-mail client and the appliance issues

  Hotmail Sign In questions

  Lost or deleted emails

  People and Contacts

  Reading, writing, and formatting mail

  Sending and receiving mail

  Sign in, and sign to the top and account security

  Using the Hotmail calendar

  Using Web Messenger

   

   

  Consult with Microsoft Certified Solutions

  How to work the views Active Hotmail?

  Your account has been temporarily blocked

  What to do if you can't connect to Windows Live Hotmail

  Compromised account - unauthorized account access

  Reset your Windows Live ID password

  Error when you try to send an e-mail: your message seems to have triggered our spam filters.

  Change your Windows Live ID password

• Hard drive inexplicably doubled from one day to the next

  My hard drive inexplicably doubled from one day to the next.  I now have only 3 GB free.  I did disk cleaning, defrags, uninstalls, deleted files (just 23 GB of personal files, music, etc. 99 GB drive), etc.  I downloaded TreeSize and see what the size of my files are, but don't know what is normal.  Common sense tells me that clearly something has changed the last time I used my computer to create this problem, but the only change I made was moving my personal files in my user folder to a Public folder, and then in my computer with my other laptop's network.  I checked three times, and my previous user folder files have definitely missing.  Could a bunch of file system are duplicated or something like that?  I know that I cannot delete them, but is it possible to clean them safely?

  To clean all the files on the computer

  1. Click to open Disk Cleanup.

  2. In the drives list, click the drive you want to clean, and then click OK.

  3. In the Disk Cleanup dialog box, click on clean up system files. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. In the disk cleanup: drive selection dialog box, select the drive you want to clean, and then click OK.

  5. In the dialog box disk cleanup, on the Disk Cleanup tab, select the check boxes for the types of files that you want to remove, and then click OK.

  6. In the message that appears, click on delete files.

     The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:

     • Programs and features. This option opens programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.

     • System Restore and shadow copies. With this option, you can remove all but the most recent point on the restore disc.

       Use system restore to return your system files to an earlier point in time, restore points. If your computer is running normally, you can save disk space by removing the previous restore points.

       In some editions of Windows 7, restore points can include previous versions of files, called the shots and backup images created with Windows complete PC Backup. These files and images will also be deleted. For more information about system restore, see what is system restore?

• How to move the FILE from one place to another and keep "Indexing" have to move to the unknown location so you can't discover its full file path? Windows instructions provide information wrong re: how to do this!

  Make a bunch of audio files, placed in a folder on my desktop. Files initially sent to RealPlayer to burn, but when finished burning CD and went to read a CD, folder got seized by Media Player, 'Indexed' and disappeared from the office. I'm a relatively new computer user, and I need to learn more about file paths, how to view the path FULL of a file on my computer and how to type (create) full path when I need to. The "Indexing" feature seems to erase this lesson for me, and after having spent four hours trying to find Vista instructions on "How to move the file from one place to another", I gave up! Windows 'Help and Support' on my computer gives wrong directions. It states that if I right click on a folder > properties, a dialog box opens with a tab by which I can move my account. There is no tab location here. I found locations tab when right click on the "Mobile" folder, but still no option to "move file". No idea what is the folder "Roaming" or why it's on my computer. I want my audio files in the My Music folder, but this place is "access denied." Don't know how to get the audio file it in any case, but if anyone has any advice, I would be very happy! Thank you. PS - I had no problem moving folders in XP. I don't like the idea that a computer is to decide where to put my files. I want to control where I put my files. I don't like the way search works under Vista. I liked the XP search companion better because, for a computer fool like me, it was really easy to organize and find files and folders and had an option specific to find audio and video file TYPES.

  Here is an article on how to move your personal folders in Vista: http://www.howtogeek.com/howto/windows-vista/moving-your-personal-data-folders-in-windows-vista-the-easy-way/.  If you're talking about the special folders (such as photos, Documents, office...), then here is an article on how to move: http://www.winhelponline.com/articles/95/1/How-to-move-the-special-folders-in-Windows-Vista.html.

  If you have trouble with the search after you move the files, then rebuild the index: http://www.tech-recipes.com/rx/2103/vista_rebuilding_the_search_index/.  Here is an article on how to use Indexing Options in Vista that may be useful for you: http://www.vistax64.com/tutorials/69581-indexing-options.html.

  If the above does not help, your problem seems to relate to the image of the files/folders and their interactions with Media Center (which operate on different other folders).  Please repost your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where the people who specialize in issues of the image will be more than happy to help you with your quesitons.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Is it possible to transfer the license from one computer to another by e-mail

  Is it possible to transfer the license from one computer to another by e-mail

  OS: Windows 7 Home Premium

  No, you transfer the license by ensuring its removed from the current computer. Continue to install on the new machine and reactivate by phone:

  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• moving from one to the other list values

  Hello my dear,
  I want to let the user to move the list value from one list to another list empty on click of a button.
  I filled dynamically on one list * what new form of instance trigger.*
  I m trying to comply with the code on button click on...
  
  
  I have to move the shape SO list box item list box.
  
  

  declare
       n1 number:=0;
       n2 number:=0;
       list_label varchar2(50);
       LIST_VALUE CHAR(5);
       v varchar2(25);
       
  begin
       n1:=get_list_element_count('DTL.SA');
       n2:=get_list_element_count('DTL.SI');
         IF N2 IS NULL THEN N2:=0; END IF;
      IF N1 IS NULL THEN N1:=0; END IF;
      
       IF N1>=1 THEN
       if :DTL.SA is not null then
            LIST_VALUE:=:DTL.SA;
               FOR I IN 1..N1
                  loop
         v:=get_list_element_VALUE('DTL.SA',i);
         if v=LIST_VALUE then
              LIST_LABEL:=get_list_element_LABEL('DTL.SA',i);
          delete_list_element('DTL.SA',i);
         end if;
                  end loop;
                  add_list_element('DTL.SI',n2+1,LIST_LABEL,LIST_VALUE);
       END IF;
       END IF;
  end;

  When I run a form, select a value in an intermediate position of a list and press the button it gives a message like * 'ELEMENT OF THE INDEX LIST' * and also move the value in another list.
  
  When I press the button without selecting all the values in the list, it inserts an element in another list...
  
  
  Please tell me how to solve this problem...
  
  waiting for m...
  
  Thanks for any response...
  
  
  Regarding
  Vishal amine

  Hello.

  I think the problem with your code is that you have to exit the loop when the list item is removed. That way, you can also put add_list_element inside the loop statement. This will also remove the second problem when an empty value is added.

  ...
    FOR I IN 1..N1
      loop
        v:=get_list_element_VALUE('DTL.SA',i);
        if v=LIST_VALUE then
              LIST_LABEL:=get_list_element_LABEL('DTL.SA',i);
          delete_list_element('DTL.SA',i);
          add_list_element('DTL.SI',n2+1,LIST_LABEL,LIST_VALUE); --transfer value inside loop
          exit; -- exiting loop when element found
        end if;
    end loop;
  ...
  

  Best regards