Deployment of VM to a model with isolated network (community VLAN)

Similar Questions

• How to deploy a VM from a model of Orchestrator

  Hey,.

  How to deploy a VM from a model using a technique of customization or launch a script customization on a Linux host via Orchestrator?  The JavaScript function not seem obvious to do this so a little code examples would be nice. Also, if I try to do using a PlugIn what are my rights of authentication?  The same as the logged-on user?

  Kind regards

  ~ Patrick

  Don't forget if the answers help you, award points

  To delpoy a virtual machine from a template use the Clone VM workflows. You can use a workflow clone with or without customization. Orchestrator, computers point of view virtual and models are pretty the same objects

• Deeper debugging on the "deployment operation failed on the agent with an error...".

  I tried to deploy a very simple plugin, a couple of settings with Snmp Fetchlet. Nothing complex.
  
  ILINT pass (although I'm not specifying a file of target.xml as examples and models do not seem to correspond to what expected the DTD), here is the result:
  -bash-3, 00 #... /emctl ilint d 0-i sysman/emd/no_targets.xml m sysman/admin/metadata/my_storage.xml - c sysman/admin/default_collection/my_storage.xml
  Oracle Enterprise Manager 10g Release 10.2.0.1.0
  Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
  Not analysis Instance file target (targets.xml)
  Validate the Collection target sysman/admin/default_collection/my_storage.xml file
  Validating target metadata file sysman/admin/metadata/my_storage.xml...
  Target the sysman/admin/metadata/my_storage.xml successfully validated metadata file
  
  The plug-in is imported into Oracle EM GM 10 5 correctly.
  
  When I try to deploy, I get an 'error '. I go to the screen deployment errors and warnings and that's:
  Deployment operation failed on the agent with an error state
  
  Where can I find some sort of journal or information more deeply in the error state?
  
  Paul

  The preferred credentials you set for the agent where you try deploy it, are the same identifying information for the user who owns this agent install? During the deployment, files that are placed on the agent receive the same permissions and owner as install other files on the agent.

• Portege R830 - model with SSD or HARD drive?

  Hello!

  I am considering buying a Portege R830. I've yet to decide between the Portégé R830-10R (model with HARD drive) and the Portégé R830 - 10 p (model with a 256 GB SSD). To do this, I would like to know:

  -What is the SSD model assembled in the Portégé R830?
  -It uses a standard SATA connection or an owner like the previous Portégé R700 SSD?
  -Have someone replaced the original HDD to the Portégé R830 by a whole new SATA 3 SSD? Wich one? It works fine?

  Thanks in advance for your help.

  Hi MadVet,

  The SSD of Portege R830 - 10 p is a model of Toshiba 2.5 so it does not work in Portege R830. In addition due to the 2.5 form factor it uses SATA standard interface as normal hard drives.

  In my opinion, you should take the model with SSD. 256 GB is enough for the operating system and applications as well as for some important data. If you need more disk external HARD disk space use. SSDS are very fast and you will see the performance of the SSD HARD drive instead ;)

• Deploy file. DLL for CompactRIO with LabView

  Hello

  I have compiled a DLL-file of SimulationX, and I want to deploy this file on a CompactRIO with LabView. How do I do that?

  Thanks in advance

  A correction, the x 900 cRIO and 908 x seem to use an x 86 CPU and execution Pharlap ETS. PharLap ETS allows you to run SOME Windows but by far not all DLLs, because it supports only a subset of the Windows API available on Windows 2000. So, if you have a controller of 908 x cRIO (900 x are very old and unlikely to be used these days) you MAY be able to deploy the DLLS on your cRIO system. To make sure that you check the DLL API not supported importation by the auditor of the DLL which can be downloaded for your version of LabVIEW specific here.

• Model with overlapping of images to print custom

  I am trying to create a model of impression for (2) 5 x 7 postcards (with logo/contact info at the bottom) a 8.5 x 11 pages. I imported a white background Photoshop image of 5 x 7 with the contact information on the bottom. Now, I want to add 2 boxes of image on top of the work of 5 x 7. The areas of the image must be modifiable so that different images can be presented for different shipments. I would also like to be able to do all this in Lightroom. Can anyone offer advice on whether this is possible and if so, how?

  Everything in the Lightroom print module-

  Try starting with a model of Lightroom [Custom square + 2] or design your own in the Panel layout Style [Custom Package].

  Cells can be resized, repositioned, with overlap, moved behind / in front, striped and with an identity edited graphic plate border.

  Once you have your design as you want TI - save it as a print template, then you can drag and drop images in the cells at any time in the future - just select your images on the film, select your registered design and images in the cells, print (or save it as jpg for printing outside!)

  

  My impression model with 3 images & identity plate

• How to create a seller on ebay model with muse adobe?

  Dear Helpers,

  I am a new seller on ebay (not seller of Web sites) and new user Adobe Muse, I love muse because it is easy to learn and quick to use.

  I need to create HTML templates for my listing new items on ebay like this: games. Workstation i7 GTX 5820 K - 32 GB-7 TB - 2 GB 670 - win 10 Pro desktop PC | eBay

  

  Part of its HTML Code:
  

  
  

  
  

  I tried to create a model with muse and I exported as HTML and I thought it's easy and only I need to go to index.html and copy the code in my ebay. but the problem was the empty index.html file as the picture:

  

  then I got my browser as the picture code but it "didn't work on ebay:"

  

  I read that eBay need a HTML code that include the code CSS as well as the HTML code.

  Can I do this with Adobe Muse?

  Thank you for your time and excuse my bad language.

  Best regards

  No, you can't. Muse is not intended for this kind of html and Muse also does not create email templates either.

• I have pages of models with the general title and keywords. Can I still add title and keywords specific to each page?

  I have pages of models with the general title and keywords. Can I still add title and keywords specific to each page?

  The individual pages have editable regions. WithiIn these regions you can modify the document, but you want.

• What script to create a model with a user interface panel

  Hello guys,.

  So I am new to scripting and javascript and I'm trying to keep it simple. I'm a VJ and want to create a script where I get a 'BPM' and a 'beat' lengh and it generate me a comp with the right length and * a layer with a marker ofr each beat.

  I was able to create this script, but I try to make it look a little better with integration of the user interface for AE I wasn't able to make it work right. If anyone can help me or give me some advice. I think that I'm not good with the expression "addComp" in the buildUI function.

  I copy everythin because it is long but you'll be understaind the main idea. My question is how to that the entry in my Advanced UI instead of "the guest".

  Here is my first code that does the job:

  Elements Var Set

  var name = prompt ("membership name");

  var BPM = prompt ("your BPM");

  If (isNaN (BPM)) {}

  Alert ("you must give the model a value");

  }

  Var prompt = beats ("how many times");

  If (isNaN (Beats)) {}

  Alert ("you must give the model a value");

  }

  frameRate var = prompt ("your fps");

  If (isNaN (frameRate)) {}

  Alert ("you must give the model a value");

  }

  term var = (60 / BPM * bat); Automatically generated

  var beat = (60 / BPM);

  Part of creation

  app.project.items.addComp (name, 1920, 1080, 1, duration, frameRate); Create the model with custom Lengh

  App.Project.Item (01).layers.addSolid ([0,0,0], "BG", 1920, 1080, 1, length); Create solid BG

  var firstLayer = app.project.item (1) .layer (1);

  firstLayer.label = 16;

  App.Project.Item (01).layers.addSolid ([0,0,0], "FX", 1920, 1080, 1, length); Create sound FX

  App.Project.Item (01).layers.addNull (Duration); Create the Null object

  var firstLayer = app.project.item (1) .layer (1); Rename the Null object

  firstLayer.enabled = false;

  firstLayer.name = "Beats";

  firstLayer.label = 0;

  Place a marker on the 64 first beat

  var myMarker = new MarkerValue("0");

  firstLayer.property("Marker").setValueAtTime (beat * 0, myMarker);

  Every beat on opacity-keys

  myProperty = firstLayer.opacity;

  myProperty.setValueAtTime (beat * 0, 0);

  
  

  For reference, I'm going to place code Dan here and use line numbers, as I explained.

  Fig. A

  var name = prompt("Composition name");
  var BPM =prompt("Your BPM");
  if (isNaN(BPM)) {
      alert("You must give the comp a value");
    }
  
  var Beats = prompt("How Many Beat");
  if (isNaN(Beats)) {
      alert("You must give the comp a value");
      }
  
  var frameRate = prompt("Your fps");
  if (isNaN(frameRate)) {
      alert("You must give the comp a value");
      }
  
  var duration = ( 60  / BPM * Beats ); //Auto Generated
  var beat = (60  / BPM);
  //Creation Part
  var myComp = app.project.items.addComp(name, 1920, 1080, 1, duration, frameRate); // Create Comp with Custom Lengh
  var firstLayer = myComp.layers.addSolid([0,0,0], "BG", 1920, 1080, 1, duration); // Create BG Solid
  firstLayer.label = 16;
  myComp.layers.addSolid([0,0,0], "FX", 1920, 1080, 1, duration); // Create FX Solid
  firstLayer = myComp.layers.addNull(duration); // Create Null Object
  firstLayer.enabled = false;
  firstLayer.name = "Beats";
  firstLayer.label = 0;
  // Place a marker on the 64 first beat
  var myMarker = new MarkerValue("0");
  firstLayer.property("Marker").setValueAtTime(beat*0, myMarker);
  // Key every Beat on opacity
  var myProperty = firstLayer.opacity;
  myProperty.setValueAtTime(beat*0, 0);
  

  OK, so for your configuration, looks like you're striking four data sets. You have the model name (fig.) At line 1), BPM (lines 2-5 of Fig. (A), (lines 7-10 of Fig. rhythms (A) and the FPS (lines 12 to 15 of Fig. (A). then it comes to the UI, you can change what I had posted to...

  res = "group{orientation:'column', alignment:['fill', 'fill'], alignChildren:['fill', 'fill'],\
    myCompName: EditText{text:'Enter comp name'},\
    myBPM: EditText{text:'Enter BPM'},\
    myBeats: EditText{text:'Enter beats'},\
    myFPS: DropDownList{properties:{items:['23.976', '24', '29.97', '30', '59.97', '60']}},\
    createComp: Button{text:'Create comp'},\
  }"
  

  This will give you all entries in four data for the user interface. It is preferable to assign each control to a new variable for use in your script.

  // Control Variables
    var compName = myPanel.grp.myCompName;
    var myBPM = myPanel.grp.myBPM;
    var myBeats = myPanel.grp.myBeats;
    var fps = myPanel.grp.myFPS;
    var createComp = myPanel.grp.createComp;
  

  Once you have these variables you can then start the default implementation as appropriate. in this case, the drop-down list should be a starting point for it's selection, so that you can say to use the first default entry as follows.

  //Defaults
    fps.selection = 0;
  

  Now, you can configure your onClick for button createComp feature. This will contain to working part of the Dan code that treats everything (lines 17-33 of Fig. (A). I've added a few lines of options above this (lines B Fig. 1-7) in the below code just to match the variable names so you wouldn't need to change the code.

  Fig. B

  //onClick setups
    createComp.onClick = function(){
    //Gather user entered values
    var name = compName.text;
    var BPM = Number(myBPM.text);
    var Beats = Number(myBeats.text);
    var frameRate = fps.selection.text;
  
    var duration = ( 60  / BPM * Beats );
    var beat = (60  / BPM);
    //Creation Part
    var myComp = app.project.items.addComp(name, 1920, 1080, 1, duration, frameRate);
    var firstLayer = myComp.layers.addSolid([0,0,0], "BG", 1920, 1080, 1, duration);
    firstLayer.label = 16;
    myComp.layers.addSolid([0,0,0], "FX", 1920, 1080, 1, duration);
    firstLayer = myComp.layers.addNull(duration);
    firstLayer.enabled = false;
    firstLayer.name = "Beats";
    firstLayer.label = 0;
    // Place a marker on the 64 first beat
    var myMarker = new MarkerValue("0");
    firstLayer.property("Marker").setValueAtTime(beat*0, myMarker);
    // Key every Beat on opacity
    var myProperty = firstLayer.opacity;
    myProperty.setValueAtTime(beat*0, 0);
    }
  

  Then line 2 Fig. b starts the call onClick for button and assigns a function. Within the function, we run the process. Fig. B Line 4 seizes the compName edit text attribute of the text control, using the Number() function convert us this text to a number for use online B Fig. 9 and 10 and B Fig. 5 line gets the text attribute of the text control edit BPM. Goes same for line 6 of the Fig. B and the beats variable. For line B Fig. 7, a drop-down list requires calling his selection of the attribute, then it is text attribute to get the actual string. The drop was more logical for FPS due to the standard rates that exist. This list can be changed of course to your liking. Now, there is no safety net as I like to call for the modification of the text controls to make sure text is not entered when you need a number and vice versa. It would be something of can check after line 7, Fig. B before trying to run the code in process (Fig. B lines 9-25). I hope that it will be easy enough for you to understand.

  If the script is as follows.

  {
  function myScript(thisObj) {
    function myScript_buildUI(thisObj) {
    var myPanel = (thisObj instanceof Panel) ? thisObj : new Window("palette", "My Panel Name", [0, 0, 300, 300]);
  
    res="group{orientation:'column', alignment:['fill', 'fill'], alignChildren:['fill', 'fill'],\
    myCompName: EditText{text:'Enter comp name'},\
    myBPM: EditText{text:'Enter BPM'},\
    myBeats: EditText{text:'Enter beats'},\
    myFPS: DropDownList{properties:{items:['23.976', '24', '29.97', '30', '59.97', '60']}},\
    createComp: Button{text:'Create comp'},\
    }"
  
    //Add resource string to panel
    myPanel.grp = myPanel.add(res);
  
    // Control Variables
    var compName = myPanel.grp.myCompName;
    var myBPM = myPanel.grp.myBPM;
    var myBeats = myPanel.grp.myBeats;
    var fps = myPanel.grp.myFPS;
    var createComp = myPanel.grp.createComp;
  
    //Defaults
    fps.selection = 0;
  
    //onClick setups
    createComp.onClick = function(){
    //Gather user entered values
    var name = compName.text;
    var BPM = Number(myBPM.text);
    var Beats = Number(myBeats.text);
    var frameRate = fps.selection.text;
  
    var duration = ( 60  / BPM * Beats );
    var beat = (60  / BPM);
  
    //Creation Part
    var myComp = app.project.items.addComp(name, 1920, 1080, 1, duration, frameRate);
    var firstLayer = myComp.layers.addSolid([0,0,0], "BG", 1920, 1080, 1, duration);
    firstLayer.label = 16;
    myComp.layers.addSolid([0,0,0], "FX", 1920, 1080, 1, duration);
    firstLayer = myComp.layers.addNull(duration);
    firstLayer.enabled = false;
    firstLayer.name = "Beats";
    firstLayer.label = 0;
  
    // Place a marker on the 64 first beat
    var myMarker = new MarkerValue("0");
    firstLayer.property("Marker").setValueAtTime(beat*0, myMarker);
    // Key every Beat on opacity
    var myProperty = firstLayer.opacity;
    myProperty.setValueAtTime(beat*0, 0);
    }
  
    //Setup panel sizing and make panel resizable
    myPanel.layout.layout(true);
    myPanel.grp.minimumSize = myPanel.grp.size;
    myPanel.layout.resize();
    myPanel.onResizing = myPanel.onResize = function () {this.layout.resize();}
  
    return myPanel;
    }
  
    var myScriptPal = myScript_buildUI(thisObj);
  
    if ((myScriptPal != null) && (myScriptPal instanceof Window)) {
    myScriptPal.center();
    myScriptPal.show();
    }
    }
  
    myScript(this);
  }
  

• If you deploy a package that you created with computer mictrosoft, Mac user, you need to use a package of Mac? If so do you need to use a mac to create a package of mac?

  If you deploy a package that you created with computer mictrosoft, Mac user, you need to use a package of Mac? If so do you need to use a mac to create a package of mac?

  Programs Windows will not install on a Mac

• Problem with RTF model with columns > 63

  Hello

  We use the XML editor in Oracle EBS 12.1.3.

  I have a relationship with more than 100 columns, for which I created an RTF model with going out to Excel. I fell on the boundary of Word of 63 columns in a table.  To get around it, I created a table with 2 columns and each column insert a table of columns about 58.

  Well, it seems to work 90% of the time.  But at the end of the excel sheet the last 20 or if data lines have sometimes 58 columns in the column in the external table empty.  The second cell of the outer table is a large cell empty.

  The issue seems to occur when there is a lot of data in the report.  If I run the report on specific lines containing questions the data is displayed correctly.

  Everyone has faced something like this?  Or have any ideas on how to debug what is happening?

  Thank you

  -Johnnie

  Hopefully the new XSL - FO model is selected in the Options tab, when you submit the request. Output XML code usually means - an error (if the program terminates with an error) or the mapping of model not done correctly (if completed normally).

• New virtual machine for the model with the specific name

  Hello

  I'm trying to add some model VM to VAPP using recomposeVApp (...). And it works well except that I can not change the name of the virtual machine while recomposing. It takes the name of the model. But how to add VMS to model with the specific name? I use the v1.0 API.

  This is my code:

  ReferenceType vmTemplateRef = new ReferenceType();
  vmTemplateRef.setName ("MyNewVM"); This name is ignored. The name of the model is taken!
  vmTemplateRef.setHref (vmRef.getHref ()); reference to the model
  
  CompositionItemParamType vmItem = new CompositionItemParamType();
  vmItem.setSource (vmTemplateRef);
  
  create the type params VAPP recompose.
  RecomposeVAppParamsType recomposeVAppParamsType = new RecomposeVAppParamsType();
  recomposeVAppParamsType.setName (vAppRef.getName ()); The name of vApp. It is ok.

  added the element of the virtual machine.
  The newItems < CompositionItemParamType > recomposeVAppParamsType = list
  . getItem().
  newItems.add (vmItem);

  Task task = vapp.recomposeVapp (recomposeVAppParamsType);

  Thank you

  Hello

  For after this code fragment:

  vmTemplateRef.setName ("MyNewVM"); This name is ignored. The name of the model is taken!

  The model name is ignored because vmTemplateRef is the only reference to the object that will be used for the operation of recomposition. If changing the name it will be always ignored.

  I think that changing the name of the virtual machine template for recompose cannot be done as follows:

  (1) operation recomposeVApp().

  (2) get the recomposed VAPP

  (3) download the children-> VM you want to change.

  (4) change the name of the virtual computer.

  I hope this helps!

• The Siebel data model with attribute mapping rule OPA?

  Hello
  
  Someone at - it has mapped siebel attribute of data model with the attribute rulefiles (rule of word doc file) (for example, p1, p2, p3... generated automatically)?
  
  I imported the siebel data model in OPM version 10.2. He created siebeldatmodel.xsrc file. all siebel attribute created with ID, model ID with the same name as the name attribute of siebel. but in the rulebook, we attributte with p1, p2, p3... names etc.
  
  The problem I am facing at I'm not able to map the attribute siebel generated with attribute (p1, p2, p3) rule book
  
  Any quick suggestions of experts will be very apperciable.
  
  
  Thank you

  There are a few simple rules for text attributes.

  1. unless the attribute belongs to the global level, the attribute must have the text of the entity included in its text. Thus, if the attribute belongs to the 'contact' it must understand that in its text. The possible options are:

  "* the contact work country."

  "the country of work of * the * contact."

  2. you cannot have two attributes with the same public name or the same text. So, you will get an error if you have two attributes with the same text "the country of work.

  Published by: frank.hampshire on July 27, 2011 13:50

  Published by: frank.hampshire on July 27, 2011 13:50

• Deployment of Out - of - Band NAC to wireless networks

  I am to evaluate the NAC for my users Wi-wired and wireless apparatus. I've read that the only way to deply to the NAC for the without thread is in-band mode, but it seems that the following link explains that it is possible to deply to the NAC for the in-band mode or out-of-band wireless networks:

  "NAC Appliance can be deployed for wireless LANs in a deployment in the endpoint Strip full-time scanning or out-of-band in a central site for periodic analysis in order to confirm compliance with the posture. The NAC Appliance server performs authentication, the posture and sanitation assessment. The server securely controls the traffic of users authenticated and unauthenticated by the management of traffic of the port/protocol or subnet policies, offering a management policy based bandwidth on share, or bandwidth by user or by using sessions on time and heartbeat checks. (Figure 1) »

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps5678/ps6521/prod_brochure0900aecd80355b2f_ps6128_Products_Brochure.html

  Anyone know if it is possible to use the deployment of out-of-band NAC to wireless networks? If you can point me to documentation it will be appreciated.

  Concerning

  That's right

• Create multiple virtual machines with 2 network cards

  Hey guys -.

  Been researching some scripts of difference but did not find one who will help me in my situation.

  I'm looking for a script that will allow me to clone model and apply network settings to 2 network cards.

  1 clone Vms + 20 model

  2 Let me send it to a particular lun (using a few LUNS to available)

  3. choose a custom unique specification

  4. apply intellectual property on 2 NICs (primary and backup).

  Any help would be sincerely appreciated.

  Thank you

  Sorry to lose this thread out of my sight.

  What follows is an attempt to meet all the conditions you listed.

  $numberOfVM = 20$baseVMName = "VM"$templateName = "Template"$osCustName = "MyCust"$IPBase1 = "192.168.1."$IPBase2 = "192.168.2."$IPMask = "255.255.255.0"$IPGate1 = "192.168.1.254"$IPGate2 = "192.168.2.254"$IPDns1 = "192.168.1.100"$IPDns2 = "192.168.2.100"
  
  # Target resourcepool$resPool = Get-ResourcePool -Name Resources
  
  # Get the template$template = Get-Template -Name $templateName
  
  # Create a copy of the OS Customisation SpecTry {    Get-OSCustomizationSpec -Name tempOSCust |    Remove-OSCustomizationSpec -Confirm:$false -ErrorAction Stop}Catch {}
  
  $osCust = Get-OSCustomizationSpec -Name $osCustName |     New-OSCustomizationSpec -Name tempOSCust -Type NonPersistent
  
  # Clone the number of requested VM1..$numberOfVm | %{    # Find the datastore with the most free space    $ds = Get-Datastore | Sort-Object -Property FreeSpaceGB -Descending |        Select -First 1
  
      # Update the OS Customisation Spec NIC parts with the IP addresses    Get-OSCustomizationNicMapping -OSCustomizationSpec $osCust |    Set-OSCustomizationNicMapping -Position 1 -IpMode UseStaticIP -IpAddress "$IPBase1$_" `        -SubnetMask $IPMask -DefaultGateway $IPGate1 -Dns $IPDns1 -ErrorAction SilentlyContinue | Out-Null
  
      Get-OSCustomizationNicMapping -OSCustomizationSpec $osCust |    Set-OSCustomizationNicMapping -Position 2 -IpMode UseStaticIP -IpAddress "$IPBase2$_" `        -SubnetMask $IPMask -DefaultGateway $IPGate2 -Dns $IPDns2 -ErrorAction SilentlyContinue | Out-Null
  
      # Create the new VM    New-VM -Name "$baseVMName$_" -Template $template -OSCustomizationSpec $osCust `        -Datastore $ds -ResourcePool $resPool  | Out-Null}
  

  The script will create clones of $numberOfVM of the model. The virtual machines will be created at the root of the bunch, and they will be called VM1, VM2...

  The OSCustomizationSpec needs to exist and must have 2 network cards.

  The script finds the data store with more free space to create each virtual computer.

  Addresses IP of NIC are consecutive, for example on NIC1 you get 192.168.1.1, 192.168.1.2... and so on.

  Let me know if you have any questions.