Description of the device

Similar Questions

• Audio event system has detected a device connection event audio location description of the Panel right-Black Jack

  I have no sound on my Dell inspiron 6400. Volume is not muted, sigmatel peripheral is enabled, hardware (speakers laptope) work, drivers have been updated and reinstalled.  Windows xp service pack 3.  The problem occurred after that children were playing a game of Dora on CD.  Above the popup of the event (System event Audio Audio System has detected a device connection event audio description location of the right panel Black Jack) appears.  Can get sound by using an external speaker.

  I note a number of comments suimilar on other sites but no resolution on these offers from

  If you go into Device Manager, you see a yellow fringe (!), which reports an error?

  To access the Device Manager in Windows XP:

   

  1. Click Start and then click Control Panel.

  2. Click the performance and Maintenance link.

     Note: If you see the Classic view of Control Panel, you will not see this link. Simple, double-click on the System icon and go to step 4.

  3. In the performance and Maintenance window, click the icon at the bottom of the window .

  4. In the System Properties window, click the hardware tab.

  5. The hardware tab selected, click the Device Manager button.

  Double-click sounds and game controllers.
  This will bring up a dialog box. From there you can update drivers, see the details of driver and driver rollback.

  If you uninstall CD Dora, you are able to get her back? It may be a conflict with the 3rd party product.

  Please let us know.

• Description: the device, \Device\CdRom0, has a bad block.

  I have McAvee.  A month ago a Trojan plopped o program my screen that said it was Windows and set the virus if I would be a click.  I knew better than to restart...  It ruins your computer of my husband 5 years ago.

  I saw that once again, but since I had a lot of problems.  The INVESTIGATION period didn't recognize me.

  I now have a PC Health Check, which appeared and he had my name on it IP.  Now I see it's been blocked.

  First of all, I couldn't start up right.  I had to choose F1 or F2.  I fixed.

  Online has been a problem.  I think I have two or three different names.

  All my backups do not appear so I can reinstall to an earlier time.  I can not restore from disk.

  Now it says I have a bad block and it is something on my CD.   Description: the device, \Device\CdRom0, has a bad block.

  Hello

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Former owner will not take the time to remove his ACCT. I have his name, number, address, serial number, imei of the device. I've added it to my Verizon plan. I can't activate it! Apple won't help me but him?

  Former owner is not the time to remove the device from his account. I have his name, number, address, serial number and imei of iphone.  I always had of BONE cell phones, but my daughter IOS. I made sure that the IMEI was clean and it was not on the black list before adding it to my Verizon account. Now, I learned about icloud.  Verizon has brought his number to the iphone and now she has no phone to use. I called apple, but I was told that they could not help me, but they might help the original owner.  They original owner is older and perhaps confused after I tried to explain what I've learned.  What can I do when the original owner is/was/still confused about how the system works?  I'm always lost in this world of apple.

  It sounds as if this iPhone is locked in Activation.  Here is the complete description of locking Activation:

  Find my iPhone Activation Lock - Apple Support

  Assuming that the former owner is ready (but simply not able) to help you, maybe if you contact the owner and his or her through the directions above, you'll be all set.

• Can I change the names of the devices connected by Bluetooth to make them more recognizable?

  I have a number of devices that can be connected by Bluetooth, for example, speakers, keyboards, etc. It is often difficult to remember the descriptive name that many of them are similar, for example "keyboard Bluetooth."

  These names can be changed so that they are easily recognizable, for example of a number/letter combination to tell LG amplifier?

  Right click on the device in the Bluetooth system preferences and select Rename.

• HP ENVY 17-j113tx TouchSmart: Bluetooth paired but NOT connected to the device

  Bluetooth paired but NOT connected to the device - question - Upload of files from device to PC fails.

  Description of the problem
  
  

  • Download a file from PC (Win10 x 64) for Android phone has worked well.
  • Download the same file from the phone on PC (Win 10 x 64) - FAILURE.

  Someone knows how to deal with this issue, provide a work around...?

  I have way too much time on my hands right now...!

  Treatment

• IDT high definition audio CODEC. Error: the device cannot start (code 10)

  Original title: IDT high definition audio CODEC

  My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!

  Hello

  1. have you done any change in software on the computer lately?
  2. What is the brand and the model number of the sound card?

  Method 1.
  Follow the procedure step by step in the article below and check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2.
  If the problem persists, follow the steps listed in the article below and check.
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
  I hope this helps.

  See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• WALKMAN NWZ-S545 gives error cannot start (error 10) device in the Device Manager (and not driver for this device found)

  Under Xp (sp3), Device Manager gives me an error for a Walkman NWZ-S545.  XP sees it as a MTP device, but it does not start.  The Device Manager will give me 2 error messages: device will not start (code 10) not and no driver not found for this device.  The walkman works very well with my other machines on the LAN XP but naturally one that I run my media (a all my MP3 etc.) is the one that has the error.  All of my PC are almost identical (with the exception of the server, duh).  I changed USB ports, uninstalled/reinstalled drivers, called SONY to dozens of times, nothing works.  Is a service not started that must be, a driver damaged, what?  Thanks for your help in advance.

  Hello

  I suggest you run the fix that is present in the link below then connect the Walkman on the system and see if the problem is resolved.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  I suggest to uninstall the drivers and firmware for the walkman of the system then download it from the Sony site and install it on the system and check if the problem is resolved.

  http://eSupport.Sony.com/us/Perl/SWU-list.pl?MDL=NWZS545&SelectOS=7#div_pos_94

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot initialize the device of this hardware driver. (Code 37)

  Windows cannot initialize the device of this hardware driver. (Code 37)
  There is no upper or lower filters in reg.
  external device does also not same massage (Windows cannot initialize the device of this hardware driver. (Code 37))
  How do I solve this problem

  Hello Rajendra Aagarwal,

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description, it looks that you are having problems with the error message Windows cannot initialize the device of this hardware driver. (Code 37).

  Method 1: Run the Fixit and check

  Hardware devices do not work or are not detected in Windows (Fixit)

  Method 2: Check the steps to get the 37 error code

  Explanation of error codes generated by Device Manager in Windows XP Professional 

  Answer to us if you are having problems with the devcie or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• How can I activate my card Miniport Tun Microsoft? Get the error code (10) the device can not be started.

  Microsoft Tun Miniport adapt #2 /.

  Microsoft Tun Miniport Adapter #2 / it is disabled (code 22) / this device cannot start (code 10).  I need help to activate the network adapter.

  Description: Broadcom 802. 11b / g wlan - Packet Scheduler Miniport

  Device ID: root | * tunmp \0001
  status 0 x 01802401 has problem
  0x0000000a problem (10)

  Hi GGisin,
   
  -Did you change on your computer before this problem?
   

  Follow the steps listed in the article below for the mentioned error code:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  Note: The information provided in this article are applicable to other versions of Windows XP as well.
   
  Additional reference on:
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

• X 3500 HNAP call to the device failed for an unknown reason.

  During the installation process Cisco Connect X 3500 briefly to connect to internet (can surf the net very briefly in this window) but when he arrives at the end of the installation it saying unsuccessful then restarts.  Is there a way to manually connect just using the address IP is a browser?

  Error code: 82BD0305

  Error description: year HNAP call to the device failed for an unknown reason.

  Model name: loading...

  Model number: X 3500

  Serial number: unknown

  Firmware version: loading...

  Operating system: Windows 7 SP 1

  Software version: 1.4.12340.0

  Connection type (WAN): loading...

  (LAN) IP address: loading...

  (WAN) IP address: loading...

  The computer IP address: 192.168.1.103

  Found!  At the bottom of the Cisco Connect program window is a link to configure manually via a web browser.

• "The device, \Device\Harddisk0\DR0, has a bad block" on Dell Vista SP2

  I am repeatedly getting the error "the device, \Device\Harddisk0\DR0, has a bad block." in the event viewer. Recently, I fixed a security problem that prevented me to install windows updates. For this, I ran CHKDSK (see results below), System File Checker, and a complete analysis of the system of McAfee, spybot and Malwarebytes, both in security and the good start. How can I check for errors on my HARD disk?

  --------------------------------------------
  My problem earlier wire: http://social.microsoft.com/Forums/is/genuinevista/thread/60c76236-abd2-4fea-8980-007f424a8eb0

  Although most things seem to work very well, "the device, \Device\Harddisk0\DR0, has a bad block." error still occurs in the event viewer despite the installation of updates/CHKDSK and SFC. Check the results of said disc 'the volume is clean' and the System File Checker showed no errors. Windows resource protection did not find any breach of integrity. Any ideas, what is happening?

  In addition, I don't know if this is related, but a problem with the wireless network connection keeps recurring. "Windows wireless service" is not automatically start during the boot. It must manually be diagnosed and started. He gave the following error message:

  

  In network connections, the IPv4 and IPv6 protocols are verified and most up-to-date driver software is installed. When I tried to update the drivers under devices, I got the following message. "The best driver for your device is already installed. Windows has determined that the driver for your device software is up-to-date.

  -----------------

  New report MGADiag after CHKDSK runs and the installation of the updates.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: genuine
  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - F4GJK - KG77H-B9HD2
  The Windows Product Key hash: iJAth4TbScMi8HdcPurlASXdEkw =
  Windows product ID: 89578-OEM-7332157-00204
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {A5A5B929-9AF8-43E5-A311-544A304C88A3} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0x00000000
  Build lab: 6002.vistasp2_gdr.110617 - 0336
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: 6.0.6002.16398

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: 2.0.48.0
  OGAExec.exe signed by: Microsoft
  OGAAddin.dll signed by: Microsoft

  OGA data-->
  Office status: 114 blocked VLK 2
  Microsoft Office XP Professional with FrontPage - 114 VLK blocked 2
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {A5A5B929-9AF8-43E5-A311-544A304C88A3}1.9.0027.06.0.6002.2.00010300.2.0.003x 32*-*-*-*-B9HD289578-OEM-7332157-002042S-1-5-21-3777094449-617660858-91839038Dell Inc.. MM061                           Dell Inc.. A14 20070402000000.000000 + 00056303507018400FE04090409Central Standard Time(GMT-06:00)03DELL M07 114114Microsoft Office XP Professional with FrontPage104iCnywwNW1w4s9ukTIwGMGxyGic =54185-640-0000025-1798914 39476F84C4B4004

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89578-00146-321-500204-02-1033-6000.0000-1402007
  Installation ID: 007894240565911961931104634943657564676410030663392174
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: B9HD2
  License status: licensed

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OAAAAAEABQABAAEAAQABAAAAAwABAAEAJJRiENrxWFBy8jZ2jNDqTizZupDy9IwU5rIQVqxW9Eg =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL M07
  FACP DELL M07
  HPET DELL M07
  STARTING DELL M07
  MCFG DELL M07
  M07 DELL SLIC
  SSDT PmRef CpuPm

  Hello

  You look at the statistics of SMART to see if the hard drive is a failure.
  http://mikemstech.blogspot.com/2011/12/how-to-detect-failing-hard-drive.html

  If he is not in default, you run chkdsk /f /r to ensure that bad sectors are marked. One way to do this forum works it offline.
  http://mikemstech.blogspot.com/2011/12/how-to-perform-offline-system-integrity.html

  If the disk is failed, you may need to save your data,

  http://mikemstech.blogspot.com/2011/12/how-to-rescue-files-from-damaged-system.html

• my cd/dvd does not work I get a code 10, the devices are not detected what do I do to fix these problems

  I went to the automated correction, it but still no change

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Please make all below even if you have done some before as it is often the set of operations which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Computer shipped with cd burner. When I go to burn a cd, it says to connect the burner. In the properties of the device, it says this device cannot start (code 10)

  Cannot read cd of either.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Description of the problem: DVD/CD player to not DO NOT WORK.

  Description of the problem: DVD/CD player to not DO NOT WORK.
  Looked in the Device Manager and no exclamation on HL-DT-ST DVD + - RW GHSON ATA DEVICE

  does this mean that the driver is corrupted? have you tried updating the driver but message says that the driver is the latest version.

  I can't play CD at all.this happened for a long time and is very frustrating. Have a Dell p.c.
  Operating system: Windows Vista

  TaraLynch,

  Try to read...

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Rick